// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2019 Gateworks Corporation */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ aliases { led0 = &led0; led1 = &led1; led2 = &led2; mmc0 = &usdhc3; }; chosen { stdout-path = &uart2; }; memory@10000000 { device_type = "memory"; reg = <0x10000000 0x20000000>; }; gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; interrupts = <0>; }; key-erased { label = "key-erased"; linux,code = <BTN_2>; interrupt-parent = <&gsc>; interrupts = <1>; }; eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; interrupts = <7>; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; pps { compatible = "pps-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; status = "okay"; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_5p0v: regulator-5p0v { compatible = "regulator-fixed"; regulator-name = "5P0V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; reg_wl: regulator-wl { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_wl>; compatible = "regulator-fixed"; regulator-name = "wl"; gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; startup-delay-us = <100>; enable-active-high; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; }; &ecspi3 { cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; phy-reset-duration = <10>; phy-reset-post-delay = <100>; status = "okay"; }; &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; status = "okay"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; gsc: gsc@20 { compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; adc { compatible = "gw,gsc-adc"; #address-cells = <1>; #size-cells = <0>; channel@6 { gw,mode = <0>; reg = <0x06>; label = "temp"; }; channel@8 { gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; channel@82 { gw,mode = <2>; reg = <0x82>; label = "vdd_vin"; gw,voltage-divider-ohms = <22100 1000>; gw,voltage-offset-microvolt = <800000>; }; channel@84 { gw,mode = <2>; reg = <0x84>; label = "vdd_5p0"; gw,voltage-divider-ohms = <22100 10000>; }; channel@86 { gw,mode = <2>; reg = <0x86>; label = "vdd_3p3"; gw,voltage-divider-ohms = <10000 10000>; }; channel@88 { gw,mode = <2>; reg = <0x88>; label = "vdd_2p5"; gw,voltage-divider-ohms = <10000 10000>; }; channel@8c { gw,mode = <2>; reg = <0x8c>; label = "vdd_3p0"; }; channel@8e { gw,mode = <2>; reg = <0x8e>; label = "vdd_arm"; }; channel@90 { gw,mode = <2>; reg = <0x90>; label = "vdd_soc"; }; channel@92 { gw,mode = <2>; reg = <0x92>; label = "vdd_1p5"; }; channel@98 { gw,mode = <2>; reg = <0x98>; label = "vdd_1p8"; }; channel@9a { gw,mode = <2>; reg = <0x9a>; label = "vdd_1p0"; gw,voltage-divider-ohms = <10000 10000>; }; channel@9c { gw,mode = <2>; reg = <0x9c>; label = "vdd_an1"; gw,voltage-divider-ohms = <10000 10000>; }; channel@a2 { gw,mode = <2>; reg = <0xa2>; label = "vdd_gsc"; gw,voltage-divider-ohms = <10000 10000>; }; }; }; gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gsc>; interrupts = <4>; }; eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; }; eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; }; eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; accel@19 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_accel>; compatible = "st,lis2de12"; reg = <0x19>; st,drdy-int-pin = <1>; interrupt-parent = <&gpio7>; interrupts = <13 0>; interrupt-names = "INT1"; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; status = "okay"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ status = "disabled"; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ status = "disabled"; }; /* off-board RS232 */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; /* serial console */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; /* cc1352 */ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; status = "okay"; }; /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "brcm,bcm4330-bt"; shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; }; /* GPS */ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; status = "okay"; }; &usbotg { vbus-supply = <®_5p0v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; dr_mode = "host"; status = "okay"; }; &usbh1 { status = "okay"; }; /* Sterling-LWB SDIO WiFi */ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; vmmc-supply = <®_wl>; non-removable; bus-width = <4>; status = "okay"; }; &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; }; &iomuxc { pinctrl_accel: accelmuxgrp { fsl,pins = < MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 >; }; pinctrl_bten: btengrp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 >; }; pinctrl_ecspi3: escpi3grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; }; pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 >; }; pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 >; }; pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; pinctrl_reg_wl: regwlgrp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ >; }; pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 >; }; pinctrl_usdhc3_100mhz: usdhc3grp100mhz { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 >; }; pinctrl_usdhc3_200mhz: usdhc3grp200mhz { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 >; }; };