/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2010 * Ilko Iliev * Asen Dimov * Ronetix GmbH * * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * Configuation settings for the PM9G45 board. */ #ifndef __CONFIG_H #define __CONFIG_H /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x70000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE BIT(21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE BIT(22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 #endif /* Ethernet */ #define CONFIG_RESET_PHY_R #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ #elif CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in mmc */ #endif /* Defines for SPL */ #define CONFIG_SPL_MAX_SIZE 0x010000 #define CONFIG_SPL_STACK 0x310000 #define CONFIG_SYS_MONITOR_LEN 0x80000 #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_BSS_START_ADDR 0x70000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #elif CONFIG_NAND_BOOT #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } #endif #define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 #endif