// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2017 NXP * Copyright 2019-2021 Traverse Technologies Australia */ #include <common.h> #include <command.h> #include <netdev.h> #include <malloc.h> #include <fsl_mdio.h> #include <miiphy.h> #include <phy.h> #include <fm_eth.h> #include <asm/io.h> #include <exports.h> #include <asm/arch/fsl_serdes.h> #include <fsl-mc/fsl_mc.h> #include <fsl-mc/ldpaa_wriop.h> void reset_phy(void) { mc_env_boot(); } int board_phy_config(struct phy_device *phydev) { /* These settings only apply to VSC8514 */ if (phydev->phy_id == 0x70670) { /* First, ensure LEDs are driven to rails (not tristate) * This is in the extended page 0x0010 */ phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, 0x0010); phy_write(phydev, MDIO_DEVAD_NONE, 0x0E, 0x2000); /* Restore to page 0 */ phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, 0x0000); /* Disable blink on the left LEDs, and make the activity LEDs blink faster */ phy_write(phydev, MDIO_DEVAD_NONE, 0x1E, 0xC03); phy_write(phydev, MDIO_DEVAD_NONE, 0x1D, 0x3421); } if (phydev->drv->config) phydev->drv->config(phydev); return 0; }