/* * Copyright 2006, 2007 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include "../common/pixis.h" phys_size_t fixed_sdram(void); int board_early_init_f(void) { return 0; } int checkboard(void) { printf ("Board: MPC8641HPCN, System ID: 0x%02x, " "System Version: 0x%02x, FPGA Version: 0x%02x\n", in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), in8(PIXIS_BASE + PIXIS_PVER)); return 0; } phys_size_t initdram(int board_type) { phys_size_t dram_size = 0; #if defined(CONFIG_SPD_EEPROM) dram_size = fsl_ddr_sdram(); #else dram_size = fixed_sdram(); #endif #if defined(CONFIG_SYS_RAMBOOT) puts(" DDR: "); return dram_size; #endif puts(" DDR: "); return dram_size; } #if !defined(CONFIG_SPD_EEPROM) /* * Fixed sdram init -- doesn't use serial presence detect. */ phys_size_t fixed_sdram(void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_ddr_t *ddr = &immap->im_ddr1; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1; ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL; ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000008D; ddr->err_sbe = 0x00ff0000; #endif asm("sync;isync"); udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL; ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; #endif asm("sync; isync"); udelay(500); #endif return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ #if defined(CONFIG_PCI) static struct pci_controller pci1_hose; #endif /* CONFIG_PCI */ #ifdef CONFIG_PCI2 static struct pci_controller pci2_hose; #endif /* CONFIG_PCI2 */ int first_free_busno = 0; extern int fsl_pci_setup_inbound_windows(struct pci_region *r); extern void fsl_pci_init(struct pci_controller *hose); void pci_init_board(void) { #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; struct pci_region *r = hose->regions; volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) >> MPC8641_PORDEVSR_IO_SEL_SHIFT; #ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) >> MPC8641_PORBMSR_HA_SHIFT; uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); #endif if ((io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 6 || io_sel == 7 || io_sel == 0xF) && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); if (pci->pme_msg_det) { pci->pme_msg_det = 0xffffffff; debug(" with errors. Clearing. Now 0x%08x", pci->pme_msg_det); } debug("\n"); /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BUS, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, CONFIG_SYS_PCI1_IO_BUS, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); /* inbound */ r += fsl_pci_setup_inbound_windows(r); hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); fsl_pci_init(hose); first_free_busno=hose->last_busno+1; printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); /* * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. */ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000))); } else { puts("PCI-EXPRESS 1: Disabled\n"); } } #else puts("PCI-EXPRESS1: Disabled\n"); #endif /* CONFIG_PCI1 */ #ifdef CONFIG_PCI2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; struct pci_controller *hose = &pci2_hose; struct pci_region *r = hose->regions; /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCI2_MEM_BUS, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, CONFIG_SYS_PCI2_IO_BUS, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); /* inbound */ r += fsl_pci_setup_inbound_windows(r); hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); fsl_pci_init(hose); first_free_busno=hose->last_busno+1; printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); } #else puts("PCI-EXPRESS 2: Disabled\n"); #endif /* CONFIG_PCI2 */ } #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { int off; u64 *tmp; u32 *addrcells; ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI1 ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCI2 ft_fsl_pci_setup(blob, "pci1", &pci2_hose); #endif /* * Warn if it looks like the device tree doesn't match u-boot. * This is just an estimation, based on the location of CCSR, * which is defined by the "reg" property in the soc node. */ off = fdt_path_offset(blob, "/soc8641"); addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL); tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL); if (tmp) { u64 addr; if (addrcells && (*addrcells == 1)) addr = *(u32 *)tmp; else addr = *tmp; if (addr != CONFIG_SYS_CCSRBAR_PHYS) printf("WARNING: The CCSRBAR address in your .dts " "does not match the address of the CCSR " "in u-boot. This means your .dts might " "be old.\n"); } } #endif /* * get_board_sys_clk * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ */ unsigned long get_board_sys_clk(ulong dummy) { u8 i, go_bit, rd_clks; ulong val = 0; go_bit = in8(PIXIS_BASE + PIXIS_VCTL); go_bit &= 0x01; rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); rd_clks &= 0x1C; /* * Only if both go bit and the SCLK bit in VCFGEN0 are set * should we be using the AUX register. Remember, we also set the * GO bit to boot from the alternate bank on the on-board flash */ if (go_bit) { if (rd_clks == 0x1c) i = in8(PIXIS_BASE + PIXIS_AUX); else i = in8(PIXIS_BASE + PIXIS_SPD); } else { i = in8(PIXIS_BASE + PIXIS_SPD); } i &= 0x07; switch (i) { case 0: val = 33000000; break; case 1: val = 40000000; break; case 2: val = 50000000; break; case 3: val = 66000000; break; case 4: val = 83000000; break; case 5: val = 100000000; break; case 6: val = 134000000; break; case 7: val = 166000000; break; } return val; } int board_eth_init(bd_t *bis) { /* Initialize TSECs */ cpu_eth_init(bis); return pci_eth_init(bis); }