/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2015 Freescale Semiconductor * Copyright 2019-2021 NXP */ #ifndef __LS1043A_COMMON_H #define __LS1043A_COMMON_H /* SPL build */ #ifdef CONFIG_SPL_BUILD #define SPL_NO_FMAN #define SPL_NO_DSPI #define SPL_NO_PCIE #define SPL_NO_ENV #define SPL_NO_MISC #define SPL_NO_USB #define SPL_NO_SATA #define SPL_NO_QE #define SPL_NO_EEPROM #endif #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) #define SPL_NO_MMC #endif #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) #define SPL_NO_IFC #endif #include #include /* Link Definitions */ #ifdef CONFIG_TFABOOT #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #else #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) #endif #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL #define CPU_RELEASE_ADDR secondary_boot_addr /* Serial Port */ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) /* SD boot SPL */ #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_STACK 0x1001e000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* * HDR would be appended at end of image and copied to DDR along * with U-Boot image. Here u-boot max. size is 512K. So if binary * size increases then increase this size in case of secure boot as * it uses raw u-boot image instead of fit image. */ #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) #else #define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_NXP_ESBC */ #endif /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) #endif /* ifdef CONFIG_NXP_ESBC */ #ifdef CONFIG_U_BOOT_HDR_SIZE /* * HDR would be appended at end of image and copied to DDR along * with U-Boot image. Here u-boot max. size is 512K. So if binary * size increases then increase this size in case of secure boot as * it uses raw u-boot image instead of fit image. */ #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) #else #define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif /* GPIO */ /* IFC */ #ifndef SPL_NO_IFC #if defined(CONFIG_TFABOOT) || \ (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting */ #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #endif #endif #endif /* I2C */ /* PCIe */ #ifndef SPL_NO_PCIE #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW #endif #endif /* DSPI */ /* FMan ucode */ #ifndef SPL_NO_FMAN #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif #endif /* Miscellaneous configurable options */ #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 #ifndef SPL_NO_MISC #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include #endif /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_addr=0x61000000\0" \ "scriptaddr=0x80000000\0" \ "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernel_addr_r=0x81000000\0" \ "kernel_start=0x1000000\0" \ "kernelheader_start=0x800000\0" \ "fdt_addr_r=0x90000000\0" \ "load_addr=0xa0000000\0" \ "kernelheader_addr=0x60600000\0" \ "kernel_size=0x2800000\0" \ "kernelheader_size=0x40000\0" \ "kernel_addr_sd=0x8000\0" \ "kernel_size_sd=0x14000\0" \ "kernelhdr_addr_sd=0x3000\0" \ "kernelhdr_size_sd=0x10\0" \ "console=ttyS0,115200\0" \ "boot_os=y\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ BOOTENV \ "boot_scripts=ls1043ardb_boot.scr\0" \ "boot_script_hdr=hdr_ls1043ardb_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ "for distro_bootpart in ${devplist}; do " \ "if fstype ${devtype} " \ "${devnum}:${distro_bootpart} " \ "bootfstype; then " \ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_start $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_start " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ "nor_bootcmd=echo Trying load from nor..;" \ "cp.b $kernel_addr $load_addr " \ "$kernel_size; env exists secureboot " \ "&& cp.b $kernelheader_addr $kernelheader_addr_r " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ "nand_bootcmd=echo Trying load from NAND..;" \ "nand info; nand read $load_addr " \ "$kernel_start $kernel_size; env exists secureboot " \ "&& nand read $kernelheader_addr_r $kernelheader_start " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ "sd_bootcmd=echo Trying load from SD ..;" \ "mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$board\0" #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ "env exists secureboot && esbc_halt;" #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ "env exists secureboot && esbc_halt;" #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ "env exists secureboot && esbc_halt;" #endif #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #include #endif /* __LS1043A_COMMON_H */