// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2020 Gateworks Corporation */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm.dtsi" / { model = "Gateworks Venice GW7901 i.MX8MM board"; compatible = "gw,imx8mm-gw7901", "fsl,imx8mm"; aliases { ethernet0 = &fec1; ethernet1 = &lan1; ethernet2 = &lan2; ethernet3 = &lan3; ethernet4 = &lan4; usb0 = &usbotg1; usb1 = &usbotg2; }; chosen { stdout-path = &uart2; }; memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0 0x80000000>; }; gpio-keys { compatible = "gpio-keys"; key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; interrupts = <0>; }; key-erased { label = "key_erased"; linux,code = <BTN_2>; interrupt-parent = <&gsc>; interrupts = <1>; }; key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; interrupts = <7>; }; }; led-controller { compatible = "gpio-leds"; led-0 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; label = "led01_red"; gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-1 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; label = "led01_grn"; gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-2 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; label = "led02_red"; gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-3 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; label = "led02_grn"; gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-4 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; label = "led03_red"; gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-5 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; label = "led03_grn"; gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-6 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; label = "led04_red"; gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-7 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; label = "led04_grn"; gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-8 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; label = "led05_red"; gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-9 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; label = "led05_grn"; gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-a { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; label = "led06_red"; gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-b { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; label = "led06_grn"; gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; pcie0_refclk: pcie0-refclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; regulator-ioexp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_ioexp>; compatible = "regulator-fixed"; regulator-name = "ioexp"; gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; enable-active-high; startup-delay-us = <100>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; regulator-isouart { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_isouart>; compatible = "regulator-fixed"; regulator-name = "iso_uart"; gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; startup-delay-us = <100>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_usb2_vbus: regulator-usb2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usb2>; compatible = "regulator-fixed"; regulator-name = "usb_usb2_vbus"; gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_wifi: regulator-wifi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_wl>; compatible = "regulator-fixed"; regulator-name = "wifi"; gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; enable-active-high; startup-delay-us = <100>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; }; &ddrc { operating-points-v2 = <&ddrc_opp_table>; ddrc_opp_table: opp-table { compatible = "operating-points-v2"; opp-25M { opp-hz = /bits/ 64 <25000000>; }; opp-100M { opp-hz = /bits/ 64 <100000000>; }; opp-750M { opp-hz = /bits/ 64 <750000000>; }; }; }; &disp_blk_ctrl { status = "disabled"; }; &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; status = "okay"; }; }; &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; status = "okay"; fixed-link { speed = <1000>; full-duplex; }; }; &gpio1 { gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#", "", "uart1_rs232#", "dig1_in", "dig1_out", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpio4 { gpio-line-names = "", "", "", "", "", "", "uart3_rs232#", "uart3_rs422#", "uart3_rs485#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", ""; }; &gpio5 { gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "", "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpu_2d { status = "disabled"; }; &gpu_3d { status = "disabled"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; gsc: gsc@20 { compatible = "gw,gsc"; reg = <0x20>; pinctrl-0 = <&pinctrl_gsc>; interrupt-parent = <&gpio4>; interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; adc { compatible = "gw,gsc-adc"; #address-cells = <1>; #size-cells = <0>; channel@6 { gw,mode = <0>; reg = <0x06>; label = "temp"; }; channel@8 { gw,mode = <1>; reg = <0x08>; label = "vdd_bat"; }; channel@82 { gw,mode = <2>; reg = <0x82>; label = "vin_aux1"; gw,voltage-divider-ohms = <22100 1000>; }; channel@84 { gw,mode = <2>; reg = <0x84>; label = "vin_aux2"; gw,voltage-divider-ohms = <22100 1000>; }; channel@86 { gw,mode = <2>; reg = <0x86>; label = "vdd_vin"; gw,voltage-divider-ohms = <22100 1000>; }; channel@88 { gw,mode = <2>; reg = <0x88>; label = "vdd_3p3"; gw,voltage-divider-ohms = <10000 10000>; }; channel@8c { gw,mode = <2>; reg = <0x8c>; label = "vdd_2p5"; gw,voltage-divider-ohms = <10000 10000>; }; channel@8e { gw,mode = <2>; reg = <0x8e>; label = "vdd_0p95"; }; channel@90 { gw,mode = <2>; reg = <0x90>; label = "vdd_soc"; }; channel@92 { gw,mode = <2>; reg = <0x92>; label = "vdd_arm"; }; channel@98 { gw,mode = <2>; reg = <0x98>; label = "vdd_1p8"; }; channel@9a { gw,mode = <2>; reg = <0x9a>; label = "vdd_1p2"; }; channel@9c { gw,mode = <2>; reg = <0x9c>; label = "vdd_dram"; }; channel@a2 { gw,mode = <2>; reg = <0xa2>; label = "vdd_gsc"; gw,voltage-divider-ohms = <10000 10000>; }; }; }; gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gsc>; interrupts = <4>; }; eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; }; eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; }; eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; }; &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio3>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; #clock-cells = <0>; clocks = <&osc_32k 0>; clock-output-names = "clk-32k-out"; regulators { /* vdd_soc: 0.805-0.900V (typ=0.8V) */ BUCK1 { regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1250>; }; /* vdd_arm: 0.805-1.0V (typ=0.9V) */ BUCK2 { regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <1000000>; rohm,dvs-idle-voltage = <900000>; }; /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; /* vdd_3p3 */ BUCK4 { regulator-name = "buck4"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; /* vdd_1p8 */ BUCK5 { regulator-name = "buck5"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; regulator-always-on; }; /* vdd_dram */ BUCK6 { regulator-name = "buck6"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; regulator-always-on; }; /* nvcc_snvs_1p8 */ LDO1 { regulator-name = "ldo1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <1900000>; regulator-boot-on; regulator-always-on; }; /* vdd_snvs_0p8 */ LDO2 { regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; }; /* vdda_1p8 */ LDO3 { regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; LDO4 { regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; LDO6 { regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; }; }; }; &i2c3 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; leds_gpio: gpio@20 { compatible = "nxp,pca9555"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; }; switch: switch@5f { compatible = "microchip,ksz9897"; reg = <0x5f>; pinctrl-0 = <&pinctrl_ksz>; interrupt-parent = <&gpio4>; interrupts = <18 IRQ_TYPE_EDGE_FALLING>; phy-mode = "rgmii-id"; ports { #address-cells = <1>; #size-cells = <0>; lan1: port@0 { reg = <0>; label = "lan1"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; port@5 { reg = <5>; label = "cpu"; ethernet = <&fec1>; phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; }; }; }; }; crypto@60 { compatible = "atmel,atecc508a"; reg = <0x60>; }; }; &i2c4 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c4>; pinctrl-1 = <&pinctrl_i2c4_gpio>; scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; clock-names = "ref"; status = "okay"; }; &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, <&pcie0_refclk>; clock-names = "pcie", "pcie_aux", "pcie_bus"; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; status = "okay"; }; &pgc_gpu { status = "disabled"; }; &pgc_gpumix { status = "disabled"; }; &pgc_mipi { status = "disabled"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; }; /* console */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; }; &usbotg1 { dr_mode = "host"; disable-over-current; status = "okay"; }; &usbotg2 { dr_mode = "host"; vbus-supply = <®_usb2_vbus>; status = "okay"; }; /* SDIO WiFi */ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; non-removable; vmmc-supply = <®_wifi>; status = "okay"; }; /* microSD */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; bus-width = <4>; vmmc-supply = <®_3p3v>; status = "okay"; }; /* eMMC */ &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; non-removable; status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */ MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */ MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */ >; }; pinctrl_fec1: fec1grp { fsl,pins = < MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */ >; }; pinctrl_gsc: gscgrp { fsl,pins = < MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 >; }; pinctrl_i2c1_gpio: i2c1gpiogrp { fsl,pins = < MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3 MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 >; }; pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3 MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 >; }; pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3 MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3 >; }; pinctrl_i2c4: i2c4grp { fsl,pins = < MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 >; }; pinctrl_i2c4_gpio: i2c4gpiogrp { fsl,pins = < MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c3 MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c3 >; }; pinctrl_ksz: kszgrp { fsl,pins = < MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41 MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */ >; }; pinctrl_pcie0: pciegrp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x40000041 /* WDIS# */ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x41 >; }; pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 >; }; pinctrl_reg_isouart: regisouartgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 >; }; pinctrl_reg_ioexp: regioexpgrp { fsl,pins = < MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 >; }; pinctrl_reg_wl: regwlgrp { fsl,pins = < MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041 >; }; pinctrl_reg_usb2: regusb1grp { fsl,pins = < MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x41 MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140 MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x140 >; }; pinctrl_spi1: spi1grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140 MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140 MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140 MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140 MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140 >; }; pinctrl_uart1_gpio: uart1gpiogrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */ >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140 MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 >; }; pinctrl_uart3_gpio: uart3gpiogrp { fsl,pins = < MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */ >; }; pinctrl_uart4: uart4grp { fsl,pins = < MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140 MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140 >; }; pinctrl_uart4_gpio: uart4gpiogrp { fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */ >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 >; }; pinctrl_usdhc2_gpio: usdhc2-gpiogrp { fsl,pins = < MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 >; }; pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 >; }; pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 >; }; };