// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include "imx6q.dtsi" #include "imx6qdl-apalis.dtsi" / { model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board"; compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", "fsl,imx6q"; aliases { i2c0 = &i2c1; i2c1 = &i2c3; i2c2 = &i2c2; rtc0 = &rtc_i2c; rtc1 = &snvs_rtc; }; chosen { stdout-path = "serial0:115200n8"; }; reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; regulator-name = "pcie_switch"; startup-delay-us = <100000>; status = "okay"; }; reg_3v3_sw: regulator-3v3-sw { compatible = "regulator-fixed"; regulator-always-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "3.3V_SW"; }; }; &can1 { xceiver-supply = <®_3v3_sw>; status = "okay"; }; &can2 { xceiver-supply = <®_3v3_sw>; status = "okay"; }; /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; }; /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; reg = <0x68>; }; }; /* * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier * board) */ &i2c3 { status = "okay"; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; vpcie-supply = <®_pcie_switch>; status = "okay"; }; &pwm1 { status = "okay"; }; &pwm2 { status = "okay"; }; &pwm3 { status = "okay"; }; &pwm4 { status = "okay"; }; ®_usb_host_vbus { status = "okay"; }; ®_usb_otg_vbus { status = "okay"; }; &sata { status = "okay"; }; &sound_spdif { status = "okay"; }; &spdif { status = "okay"; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &uart4 { status = "okay"; }; &uart5 { status = "okay"; }; &usbh1 { vbus-supply = <®_usb_host_vbus>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; status = "okay"; }; /* MMC1 */ &usdhc1 { status = "okay"; }; /* SD1 */ &usdhc2 { cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; status = "okay"; };