/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * (C) Copyright 2010 * Achim Ehrlich * taskit GmbH * * (C) Copyright 2012 * Markus Hubig * IMKO GmbH * * (C) Copyright 2014 * Heiko Schocher * DENX Software Engineering GmbH * * Configuation settings for the smartweb. */ #ifndef __CONFIG_H #define __CONFIG_H /* * SoC must be defined first, before hardware.h is included. * In this case SoC is defined in boards.cfg. */ #include #include /* * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot * program. Since the linker has to swallow that define, we must use a pure * hex number here! */ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ /* misc settings */ /* We set the max number of command args high to avoid HUSH bugs. */ #define CONFIG_SYS_MAXARGS 32 /* setting board specific options */ #define CONFIG_SYS_AUTOLOAD "yes" /* The LED PINs */ #define CONFIG_RED_LED AT91_PIN_PA9 #define CONFIG_GREEN_LED AT91_PIN_PA6 /* * SDRAM: 1 bank, 64 MB, base address 0x20000000 * Already initialized before u-boot gets started. */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE (64 * SZ_1M) /* * Perform a SDRAM Memtest from the start of SDRAM * till the beginning of the U-Boot position in RAM. */ /* NAND flash settings */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 /* serial console */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 /* USB DFU support */ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif /* General Boot Parameter */ #define CONFIG_SYS_CBSIZE 512 /* * The NAND Flash partitions: */ #define CONFIG_ENV_RANGE (SZ_512K) /* * Predefined environment variables. * Usefull to define some easy to use boot commands. */ #define CONFIG_EXTRA_ENV_SETTINGS \ \ "basicargs=console=ttyS0,115200\0" \ \ "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_INIT_SP_ADDR 0x301000 #else /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, * leaving the correct space for initial global data structure above that * address while providing maximum stack area below. */ #define CONFIG_SYS_INIT_SP_ADDR \ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif /* Defines for SPL */ #define CONFIG_SPL_MAX_SIZE (SZ_4K) #define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_SIZE (SZ_256M) #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } #define CONFIG_SYS_MASTER_CLOCK (198656000/2) #define AT91_PLL_LOCK_TIMEOUT 1000000 #define CONFIG_SYS_AT91_PLLA 0x2060bf09 #define CONFIG_SYS_MCKR 0x100 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10483f0e #define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS #define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO #endif /* __CONFIG_H */