/* SPDX-License-Identifier: GPL-2.0 * Copyright 2016-2019 NXP * Copyright 2019 Vladimir Oltean */ #ifndef __CONFIG_H #define __CONFIG_H #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE /* XHCI Support - enabled by default */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 #define DDR_TIMING_CFG_0 0x50550004 #define DDR_TIMING_CFG_1 0xbcb38c56 #define DDR_TIMING_CFG_2 0x0040d120 #define DDR_TIMING_CFG_3 0x010e1000 #define DDR_TIMING_CFG_4 0x00000001 #define DDR_TIMING_CFG_5 0x03401400 #define DDR_SDRAM_CFG_2 0x00401010 #define DDR_SDRAM_MODE 0x00061c60 #define DDR_SDRAM_MODE_2 0x00180000 #define DDR_SDRAM_INTERVAL 0x18600618 #define DDR_DDR_WRLVL_CNTL 0x8655f605 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 #define DDR_DDR_CDR1 0x80040000 #define DDR_DDR_CDR2 0x00000001 #define DDR_SDRAM_CLK_CNTL 0x02000000 #define DDR_DDR_ZQ_CNTL 0x89080600 #define DDR_CS0_CONFIG_2 0 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 #define SDRAM_CFG2_D_INIT 0x00000010 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) #endif /* ifdef CONFIG_NXP_ESBC */ #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SPL_PAD_TO 0x1c000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #ifdef CONFIG_U_BOOT_HDR_SIZE /* * HDR would be appended at end of image and copied to DDR along * with U-Boot image. Here u-boot max. size is 512K. So if binary * size increases then increase this size in case of secure boot as * it uses raw U-Boot image instead of FIT image. */ #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) #else #define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE /* Serial Port */ #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #endif #define CONFIG_SYS_NS16550_CLK get_serial_clock() /* I2C */ /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 /* QSPI */ #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 /* PCIe */ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW #endif #define CONFIG_LAYERSCAPE_NS_ACCESS #define COUNTER_FREQUENCY 12500000 #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 256 #define CONFIG_FSL_DEVICE_DISABLE #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "initrd_high=0xffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x61000000\0" \ "kernelheader_addr=0x60800000\0" \ "scriptaddr=0x80000000\0" \ "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernel_addr_r=0x80008000\0" \ "kernelheader_size=0x40000\0" \ "fdt_addr_r=0x8f000000\0" \ "ramdisk_addr_r=0xa0000000\0" \ "load_addr=0x80008000\0" \ "kernel_size=0x2800000\0" \ "kernel_addr_sd=0x8000\0" \ "kernel_size_sd=0x14000\0" \ "kernelhdr_addr_sd=0x4000\0" \ "kernelhdr_size_sd=0x10\0" \ BOOTENV \ "boot_scripts=ls1021atsn_boot.scr\0" \ "boot_script_hdr=hdr_ls1021atsn_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ "for distro_bootpart in ${devplist}; do " \ "if fstype ${devtype} " \ "${devnum}:${distro_bootpart} " \ "bootfstype; then " \ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ "scan_dev_for_boot=" \ "echo Scanning ${devtype} " \ "${devnum}:${distro_bootpart}...; " \ "for prefix in ${boot_prefixes}; do " \ "run scan_dev_for_scripts; " \ "run scan_dev_for_extlinux; " \ "done;" \ "\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ "sd_bootcmd=echo Trying load from SD ..;" \ "mmcinfo && mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$board\0" /* Miscellaneous configurable options */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_LS102XA_STREAM_ID #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif /* Environment */ #define CONFIG_SYS_BOOTM_LEN 0x8000000 /* 128 MB */ #endif