/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2014-2015 Freescale Semiconductor * Copyright 2019 NXP * * Extracted from armv8/start.S */ #include #include #include #include #include #ifdef CONFIG_FSL_LSCH3 #include #endif #include .align 3 .weak secondary_boot_addr secondary_boot_addr: .quad 0 /* Get GIC offset * For LS1043a rev1.0, GIC base address align with 4k. * For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT] * is set, GIC base address align with 4K, or else align * with 64k. * output: * x0: the base address of GICD * x1: the base address of GICC */ ENTRY(get_gic_offset) ldr x0, =GICD_BASE #ifdef CONFIG_GICV2 ldr x1, =GICC_BASE #endif #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN ldr x2, =DCFG_CCSR_SVR ldr w2, [x2] rev w2, w2 lsr w3, w2, #16 ldr w4, =SVR_DEV(SVR_LS1043A) cmp w3, w4 b.ne 1f ands w2, w2, #0xff cmp w2, #REV1_0 b.eq 1f ldr x2, =SCFG_GIC400_ALIGN ldr w2, [x2] rev w2, w2 tbnz w2, #GIC_ADDR_BIT, 1f ldr x0, =GICD_BASE_64K #ifdef CONFIG_GICV2 ldr x1, =GICC_BASE_64K #endif 1: #endif ret ENDPROC(get_gic_offset) ENTRY(smp_kick_all_cpus) /* Kick secondary cpus up by SGI 0 interrupt */ #if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) mov x29, lr /* Save LR */ bl get_gic_offset bl gic_kick_secondary_cpus mov lr, x29 /* Restore LR */ #endif ret ENDPROC(smp_kick_all_cpus) ENTRY(lowlevel_init) mov x29, lr /* Save LR */ switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */ 1: #if defined (CONFIG_SYS_FSL_HAS_CCN504) /* Set Wuo bit for RN-I 20 */ #ifdef CONFIG_ARCH_LS2080A ldr x0, =CCI_AUX_CONTROL_BASE(20) ldr x1, =0x00000010 bl ccn504_set_aux /* * Set forced-order mode in RNI-6, RNI-20 * This is required for performance optimization on LS2088A * LS2080A family does not support setting forced-order mode, * so skip this operation for LS2080A family */ bl get_svr lsr w0, w0, #16 ldr w1, =SVR_DEV(SVR_LS2080A) cmp w0, w1 b.eq 1f ldr x0, =CCI_AUX_CONTROL_BASE(6) ldr x1, =0x00000020 bl ccn504_set_aux ldr x0, =CCI_AUX_CONTROL_BASE(20) ldr x1, =0x00000020 bl ccn504_set_aux 1: #endif /* Add fully-coherent masters to DVM domain */ ldr x0, =CCI_MN_BASE ldr x1, =CCI_MN_RNF_NODEID_LIST ldr x2, =CCI_MN_DVM_DOMAIN_CTL_SET bl ccn504_add_masters_to_dvm /* Set all RN-I ports to QoS of 15 */ ldr x0, =CCI_S0_QOS_CONTROL_BASE(0) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S1_QOS_CONTROL_BASE(0) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S2_QOS_CONTROL_BASE(0) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S0_QOS_CONTROL_BASE(2) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S1_QOS_CONTROL_BASE(2) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S2_QOS_CONTROL_BASE(2) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S0_QOS_CONTROL_BASE(6) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S1_QOS_CONTROL_BASE(6) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S2_QOS_CONTROL_BASE(6) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S0_QOS_CONTROL_BASE(12) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S1_QOS_CONTROL_BASE(12) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S2_QOS_CONTROL_BASE(12) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S0_QOS_CONTROL_BASE(16) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S1_QOS_CONTROL_BASE(16) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S2_QOS_CONTROL_BASE(16) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S0_QOS_CONTROL_BASE(20) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S1_QOS_CONTROL_BASE(20) ldr x1, =0x00FF000C bl ccn504_set_qos ldr x0, =CCI_S2_QOS_CONTROL_BASE(20) ldr x1, =0x00FF000C bl ccn504_set_qos #endif /* CONFIG_SYS_FSL_HAS_CCN504 */ #ifdef SMMU_BASE /* Set the SMMU page size in the sACR register */ ldr x1, =SMMU_BASE ldr w0, [x1, #0x10] orr w0, w0, #1 << 16 /* set sACR.pagesize to indicate 64K page */ str w0, [x1, #0x10] #endif /* Initialize GIC Secure Bank Status */ #if !defined(CONFIG_SPL_BUILD) #if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) branch_if_slave x0, 1f bl get_gic_offset bl gic_init_secure 1: #ifdef CONFIG_GICV3 ldr x0, =GICR_BASE bl gic_init_secure_percpu #elif defined(CONFIG_GICV2) bl get_gic_offset bl gic_init_secure_percpu #endif #endif #endif 100: branch_if_master x0, 2f #if defined(CONFIG_MP) && defined(CONFIG_ARMV8_MULTIENTRY) /* * Formerly, here was a jump to secondary_boot_func, but we just * return early here and let the generic code in start.S handle * the jump to secondary_boot_func. */ mov lr, x29 /* Restore LR */ ret #endif 2: switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */ 1: #ifdef CONFIG_FSL_TZPC_BP147 /* Set Non Secure access for all devices protected via TZPC */ ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */ orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */ str w0, [x1] isb dsb sy #endif #ifdef CONFIG_FSL_TZASC_400 /* * LS2080 and its personalities does not support TZASC * So skip TZASC related operations */ bl get_svr lsr w0, w0, #16 ldr w1, =SVR_DEV(SVR_LS2080A) cmp w0, w1 b.eq 1f /* Set TZASC so that: * a. We use only Region0 whose global secure write/read is EN * b. We use only Region0 whose NSAID write/read is EN * * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just * placeholders. */ .macro tzasc_prog, xreg mov x12, TZASC1_BASE mov x16, #0x10000 mul x14, \xreg, x16 add x14, x14,x12 mov x1, #0x8 add x1, x1, x14 ldr w0, [x1] /* Filter 0 Gate Keeper Register */ orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */ str w0, [x1] mov x1, #0x110 add x1, x1, x14 ldr w0, [x1] /* Region-0 Attributes Register */ orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */ orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */ str w0, [x1] mov x1, #0x114 add x1, x1, x14 ldr w0, [x1] /* Region-0 Access Register */ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ str w0, [x1] .endm #ifdef CONFIG_FSL_TZASC_1 mov x13, #0 tzasc_prog x13 #endif #ifdef CONFIG_FSL_TZASC_2 mov x13, #1 tzasc_prog x13 #endif isb dsb sy #endif 100: 1: #ifdef CONFIG_ARCH_LS1046A switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */ 1: /* Initialize the L2 RAM latency */ mrs x1, S3_1_c11_c0_2 mov x0, #0x1C7 /* Clear L2 Tag RAM latency and L2 Data RAM latency */ bic x1, x1, x0 /* Set L2 data ram latency bits [2:0] */ orr x1, x1, #0x2 /* set L2 tag ram latency bits [8:6] */ orr x1, x1, #0x80 msr S3_1_c11_c0_2, x1 isb 100: #endif #if !defined(CONFIG_TFABOOT) && \ (defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)) bl fsl_ocram_init #endif mov lr, x29 /* Restore LR */ ret ENDPROC(lowlevel_init) #if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD) ENTRY(fsl_ocram_init) mov x28, lr /* Save LR */ bl fsl_clear_ocram bl fsl_ocram_clear_ecc_err mov lr, x28 /* Restore LR */ ret ENDPROC(fsl_ocram_init) ENTRY(fsl_clear_ocram) /* Clear OCRAM */ ldr x0, =CONFIG_SYS_FSL_OCRAM_BASE ldr x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE) mov x2, #0 clear_loop: str x2, [x0] add x0, x0, #8 cmp x0, x1 b.lo clear_loop ret ENDPROC(fsl_clear_ocram) ENTRY(fsl_ocram_clear_ecc_err) /* OCRAM1/2 ECC status bit */ mov w1, #0x60 ldr x0, =DCSR_DCFG_SBEESR2 str w1, [x0] ldr x0, =DCSR_DCFG_MBEESR2 str w1, [x0] ret ENDPROC(fsl_ocram_init) #endif #ifdef CONFIG_FSL_LSCH3 .globl get_svr get_svr: ldr x1, =FSL_LSCH3_SVR ldr w0, [x1] ret #endif #if defined(CONFIG_SYS_FSL_HAS_CCN504) || defined(CONFIG_SYS_FSL_HAS_CCN508) hnf_pstate_poll: /* x0 has the desired status, return only if operation succeed * clobber x1, x2, x6 */ mov x1, x0 mov w6, #8 /* HN-F node count */ mov x0, #0x18 movk x0, #0x420, lsl #16 /* HNF0_PSTATE_STATUS */ 1: ldr x2, [x0] cmp x2, x1 /* check status */ b.eq 2f b 1b 2: add x0, x0, #0x10000 /* move to next node */ subs w6, w6, #1 cbnz w6, 1b ret hnf_set_pstate: /* x0 has the desired state, clobber x1, x2, x6 */ mov x1, x0 /* power state to SFONLY */ mov w6, #8 /* HN-F node count */ mov x0, #0x10 movk x0, #0x420, lsl #16 /* HNF0_PSTATE_REQ */ 1: /* set pstate to sfonly */ ldr x2, [x0] and x2, x2, #0xfffffffffffffffc /* & HNFPSTAT_MASK */ orr x2, x2, x1 str x2, [x0] add x0, x0, #0x10000 /* move to next node */ subs w6, w6, #1 cbnz w6, 1b ret ENTRY(__asm_flush_l3_dcache) /* * Return status in x0 * success 0 */ mov x29, lr dsb sy mov x0, #0x1 /* HNFPSTAT_SFONLY */ bl hnf_set_pstate mov x0, #0x4 /* SFONLY status */ bl hnf_pstate_poll dsb sy mov x0, #0x3 /* HNFPSTAT_FAM */ bl hnf_set_pstate mov x0, #0xc /* FAM status */ bl hnf_pstate_poll mov x0, #0 mov lr, x29 ret ENDPROC(__asm_flush_l3_dcache) #endif /* CONFIG_SYS_FSL_HAS_CCN504 */