/* * (C) Copyright 2000-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #ifdef CONFIG_8xx #include #endif #ifdef CONFIG_5xx #include #endif #ifdef CONFIG_MPC5xxx #include #endif #if defined(CONFIG_CMD_IDE) #include #endif #if defined(CONFIG_CMD_SCSI) #include #endif #if defined(CONFIG_CMD_KGDB) #include #endif #ifdef CONFIG_STATUS_LED #include #endif #include #ifdef CONFIG_GENERIC_MMC #include #endif #include #ifdef CONFIG_SYS_ALLOC_DPRAM #if !defined(CONFIG_CPM2) #include #endif #endif #include #if defined(CONFIG_BAB7xx) #include #endif #include #if defined(CONFIG_POST) #include #endif #if defined(CONFIG_LOGBUFFER) #include #endif #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) #include #endif #ifdef CONFIG_PS2KBD #include #endif #ifdef CONFIG_ADDR_MAP #include #endif #ifdef CONFIG_MP #include #endif #ifdef CONFIG_BITBANGMII #include #endif #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE extern int update_flash_size (int flash_size); #endif #if defined(CONFIG_SC3) extern void sc3_read_eeprom(void); #endif #if defined(CONFIG_CMD_DOC) void doc_init (void); #endif #if defined(CONFIG_HARD_I2C) || \ defined(CONFIG_SOFT_I2C) #include #endif #include #include static char *failed = "*** failed ***\n"; #if defined(CONFIG_OXC) || defined(CONFIG_RMU) extern flash_info_t flash_info[]; #endif #if defined(CONFIG_START_IDE) extern int board_start_ide(void); #endif #include DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_SYS_MEM_TOP_HIDE) #define CONFIG_SYS_MEM_TOP_HIDE 0 #endif extern ulong __init_end; extern ulong __bss_end__; ulong monitor_flash_len; #if defined(CONFIG_CMD_BEDBUG) #include #endif /************************************************************************ * Utilities * ************************************************************************ */ /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the * requirements are just _too_ different. To get rid of the resulting * mess of board dependend #ifdef'ed code we now make the whole * initialization sequence configurable to the user. * * The requirements for any new initalization function is simple: it * receives a pointer to the "global data" structure as it's only * argument, and returns an integer return code, where 0 means * "continue" and != 0 means "fatal error, hang the system". */ typedef int (init_fnc_t) (void); /************************************************************************ * Init Utilities * ************************************************************************ * Some of this code should be moved into the core functions, * but let's get it working (again) first... */ static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ int i = getenv_f("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) ? (int) simple_strtoul (tmp, NULL, 10) : CONFIG_BAUDRATE; return (0); } /***********************************************************************/ void __board_add_ram_info(int use_default) { /* please define platform specific board_add_ram_info() */ } void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); int __board_flash_wp_on(void) { /* * Most flashes can't be detected when write protection is enabled, * so provide a way to let U-Boot gracefully ignore write protected * devices. */ return 0; } int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on"))); static int init_func_ram (void) { #ifdef CONFIG_BOARD_TYPES int board_type = gd->board_type; #else int board_type = 0; /* use dummy arg */ #endif puts ("DRAM: "); if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); board_add_ram_info(0); putc('\n'); return (0); } puts (failed); return (1); } /***********************************************************************/ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) static int init_func_i2c (void) { puts ("I2C: "); i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); puts ("ready\n"); return (0); } #endif #if defined(CONFIG_HARD_SPI) static int init_func_spi (void) { puts ("SPI: "); spi_init (); puts ("ready\n"); return (0); } #endif /***********************************************************************/ #if defined(CONFIG_WATCHDOG) static int init_func_watchdog_init (void) { puts (" Watchdog enabled\n"); WATCHDOG_RESET (); return (0); } # define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init, static int init_func_watchdog_reset (void) { WATCHDOG_RESET (); return (0); } # define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset, #else # define INIT_FUNC_WATCHDOG_INIT /* undef */ # define INIT_FUNC_WATCHDOG_RESET /* undef */ #endif /* CONFIG_WATCHDOG */ /************************************************************************ * Initialization sequence * ************************************************************************ */ init_fnc_t *init_sequence[] = { #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) probecpu, #endif #if defined(CONFIG_BOARD_EARLY_INIT_F) board_early_init_f, #endif #if !defined(CONFIG_8xx_CPUCLK_DEFAULT) get_clocks, /* get CPU and bus clocks (etc.) */ #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \ && !defined(CONFIG_TQM885D) adjust_sdram_tbs_8xx, #endif init_timebase, #endif #ifdef CONFIG_SYS_ALLOC_DPRAM #if !defined(CONFIG_CPM2) dpram_init, #endif #endif #if defined(CONFIG_BOARD_POSTCLK_INIT) board_postclk_init, #endif env_init, #if defined(CONFIG_8xx_CPUCLK_DEFAULT) get_clocks_866, /* get CPU and bus clocks according to the environment variable */ sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */ init_timebase, #endif init_baudrate, serial_init, console_init_f, display_options, #if defined(CONFIG_8260) prt_8260_rsr, prt_8260_clks, #endif /* CONFIG_8260 */ #if defined(CONFIG_MPC83xx) prt_83xx_rsr, #endif checkcpu, #if defined(CONFIG_MPC5xxx) prt_mpc5xxx_clks, #endif /* CONFIG_MPC5xxx */ #if defined(CONFIG_MPC8220) prt_mpc8220_clks, #endif checkboard, INIT_FUNC_WATCHDOG_INIT #if defined(CONFIG_MISC_INIT_F) misc_init_f, #endif INIT_FUNC_WATCHDOG_RESET #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) init_func_i2c, #endif #if defined(CONFIG_HARD_SPI) init_func_spi, #endif #ifdef CONFIG_POST post_init_f, #endif INIT_FUNC_WATCHDOG_RESET init_func_ram, #if defined(CONFIG_SYS_DRAM_TEST) testdram, #endif /* CONFIG_SYS_DRAM_TEST */ INIT_FUNC_WATCHDOG_RESET NULL, /* Terminate this list */ }; ulong get_effective_memsize(void) { #ifndef CONFIG_VERY_BIG_RAM return gd->ram_size; #else /* limit stack to what we can reasonable map */ return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? CONFIG_MAX_MEM_MAPPED : gd->ram_size); #endif } /************************************************************************ * * This is the first part of the initialization sequence that is * implemented in C, but still running from ROM. * * The main purpose is to provide a (serial) console interface as * soon as possible (so we can see any error messages), and to * initialize the RAM so that we can relocate the monitor code to * RAM. * * Be aware of the restrictions: global data is read-only, BSS is not * initialized, and stack space is limited to a few kB. * ************************************************************************ */ #ifdef CONFIG_LOGBUFFER unsigned long logbuffer_base(void) { return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN; } #endif void board_init_f (ulong bootflag) { bd_t *bd; ulong len, addr, addr_sp; ulong *s; gd_t *id; init_fnc_t **init_fnc_ptr; #ifdef CONFIG_PRAM int i; ulong reg; uchar tmp[64]; /* long enough for environment variables */ #endif /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); #if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \ !defined(CONFIG_MPC86xx) /* Clear initial global data */ memset ((void *) gd, 0, sizeof (gd_t)); #endif for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr) () != 0) { hang (); } } /* * Now that we have DRAM mapped and working, we can * relocate the code and continue running from DRAM. * * Reserve memory at end of RAM for (top down in that order): * - area that won't get touched by U-Boot and Linux (optional) * - kernel log buffer * - protected RAM * - LCD framebuffer * - monitor code * - board info struct */ len = (ulong)&__bss_end__ - CONFIG_SYS_MONITOR_BASE; /* * Subtract specified amount of memory to hide so that it won't * get "touched" at all by U-Boot. By fixing up gd->ram_size * the Linux kernel should now get passed the now "corrected" * memory size and won't touch it either. This should work * for arch/ppc and arch/powerpc. Only Linux board ports in * arch/powerpc with bootwrapper support, that recalculate the * memory size from the SDRAM controller setup will have to * get fixed. */ gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize(); #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) /* * We need to make sure the location we intend to put secondary core * boot code is reserved and not used by any part of u-boot */ if (addr > determine_mp_bootpg()) { addr = determine_mp_bootpg(); debug ("Reserving MP boot page to %08lx\n", addr); } #endif #ifdef CONFIG_LOGBUFFER #ifndef CONFIG_ALT_LB_ADDR /* reserve kernel log buffer */ addr -= (LOGBUFF_RESERVE); debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr); #endif #endif #ifdef CONFIG_PRAM /* * reserve protected RAM */ i = getenv_f("pram", (char *)tmp, sizeof (tmp)); reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM; addr -= (reg << 10); /* size is in kB */ debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); #endif /* CONFIG_PRAM */ /* round down to next 4 kB limit */ addr &= ~(4096 - 1); debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); #ifdef CONFIG_LCD /* reserve memory for LCD display (always full pages) */ addr = lcd_setmem (addr); gd->fb_base = addr; #endif /* CONFIG_LCD */ #if defined(CONFIG_VIDEO) && defined(CONFIG_8xx) /* reserve memory for video display (always full pages) */ addr = video_setmem (addr); gd->fb_base = addr; #endif /* CONFIG_VIDEO */ /* * reserve memory for U-Boot code, data & bss * round down to next 4 kB limit */ addr -= len; addr &= ~(4096 - 1); #ifdef CONFIG_E500 /* round down to next 64 kB limit so that IVPR stays aligned */ addr &= ~(65536 - 1); #endif debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); /* * reserve memory for malloc() arena */ addr_sp = addr - TOTAL_MALLOC_LEN; debug ("Reserving %dk for malloc() at: %08lx\n", TOTAL_MALLOC_LEN >> 10, addr_sp); /* * (permanently) allocate a Board Info struct * and a permanent copy of the "global" data */ addr_sp -= sizeof (bd_t); bd = (bd_t *) addr_sp; memset(bd, 0, sizeof(bd_t)); gd->bd = bd; debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* * Finally, we set up a new (bigger) stack. * * Leave some safety gap for SP, force alignment on 16 byte boundary * Clear initial stack frame */ addr_sp -= 16; addr_sp &= ~0xF; s = (ulong *)addr_sp; *s-- = 0; *s-- = 0; addr_sp = (ulong)s; debug ("Stack Pointer at: %08lx\n", addr_sp); /* * Save local variables to board info struct */ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ #ifdef CONFIG_SYS_SRAM_BASE bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */ bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */ #endif #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif #if defined(CONFIG_MPC5xxx) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) bd->bi_immrbar = CONFIG_SYS_IMMR; #endif #if defined(CONFIG_MPC8220) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ bd->bi_inpfreq = gd->inp_clk; bd->bi_pcifreq = gd->pci_clk; bd->bi_vcofreq = gd->vco_clk; bd->bi_pevfreq = gd->pev_clk; bd->bi_flbfreq = gd->flb_clk; /* store bootparam to sram (backward compatible), here? */ { u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE; *sram++ = gd->ram_size; *sram++ = gd->bus_clk; *sram++ = gd->inp_clk; *sram++ = gd->cpu_clk; *sram++ = gd->vco_clk; *sram++ = gd->flb_clk; *sram++ = 0xb8c3ba11; /* boot signature */ } #endif WATCHDOG_RESET (); bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ #if defined(CONFIG_CPM2) bd->bi_cpmfreq = gd->cpm_clk; bd->bi_brgfreq = gd->brg_clk; bd->bi_sccfreq = gd->scc_clk; bd->bi_vco = gd->vco_out; #endif /* CONFIG_CPM2 */ #if defined(CONFIG_MPC512X) bd->bi_ipsfreq = gd->ips_clk; #endif /* CONFIG_MPC512X */ #if defined(CONFIG_MPC5xxx) bd->bi_ipbfreq = gd->ipb_clk; bd->bi_pcifreq = gd->pci_clk; #endif /* CONFIG_MPC5xxx */ bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CONFIG_SYS_EXTBDINFO strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version)); strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version)); bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */ bd->bi_plb_busfreq = gd->bus_clk; #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) bd->bi_pci_busfreq = get_PCI_freq (); bd->bi_opbfreq = get_OPB_freq (); #elif defined(CONFIG_XILINX_405) bd->bi_pci_busfreq = get_PCI_freq (); #endif #endif debug ("New Stack Pointer is: %08lx\n", addr_sp); WATCHDOG_RESET (); #ifdef CONFIG_POST post_bootmode_init(); post_run (NULL, POST_ROM | post_bootmode_get(0)); #endif WATCHDOG_RESET(); gd->relocaddr = addr; /* Record relocation address, useful for debug */ memcpy (id, (void *)gd, sizeof (gd_t)); relocate_code (addr_sp, id, addr); /* NOTREACHED - relocate_code() does not return */ } /************************************************************************ * * This is the next part if the initialization sequence: we are now * running from RAM and have a "normal" C environment, i. e. global * data can be written, BSS has been cleared, the stack size in not * that critical any more, etc. * ************************************************************************ */ void board_init_r (gd_t *id, ulong dest_addr) { char *s; bd_t *bd; ulong malloc_start; #ifndef CONFIG_SYS_NO_FLASH ulong flash_size; #endif gd = id; /* initialize RAM version of global data */ bd = gd->bd; gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ /* The Malloc area is immediately below the monitor copy in DRAM */ malloc_start = dest_addr - TOTAL_MALLOC_LEN; #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) /* * The gd->cpu pointer is set to an address in flash before relocation. * We need to update it to point to the same CPU entry in RAM. */ gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE; #endif #ifdef CONFIG_SYS_EXTRA_ENV_RELOC /* * Some systems need to relocate the env_addr pointer early because the * location it points to will get invalidated before env_relocate is * called. One example is on systems that might use a L2 or L3 cache * in SRAM mode and initialize that cache from SRAM mode back to being * a cache in cpu_init_r. */ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE; #endif #ifdef CONFIG_SERIAL_MULTI serial_initialize(); #endif debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); WATCHDOG_RESET (); /* * Setup trap handlers */ trap_init (dest_addr); #ifdef CONFIG_ADDR_MAP init_addr_map(); #endif #if defined(CONFIG_BOARD_EARLY_INIT_R) board_early_init_r (); #endif monitor_flash_len = (ulong)&__init_end - dest_addr; WATCHDOG_RESET (); #ifdef CONFIG_LOGBUFFER logbuff_init_ptrs (); #endif #ifdef CONFIG_POST post_output_backlog (); #endif WATCHDOG_RESET(); #if defined(CONFIG_SYS_DELAYED_ICACHE) icache_enable (); /* it's time to enable the instruction cache */ #endif #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */ #endif #if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT) /* * Do early PCI configuration _before_ the flash gets initialised, * because PCU ressources are crucial for flash access on some boards. */ pci_init (); #endif #if defined(CONFIG_WINBOND_83C553) /* * Initialise the ISA bridge */ initialise_w83c553f (); #endif asm ("sync ; isync"); mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN); #if !defined(CONFIG_SYS_NO_FLASH) puts ("Flash: "); if (board_flash_wp_on()) { printf("Uninitialized - Write Protect On\n"); /* Since WP is on, we can't find real size. Set to 0 */ flash_size = 0; } else if ((flash_size = flash_init ()) > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM print_size (flash_size, ""); /* * Compute and print flash CRC if flashchecksum is set to 'y' * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ s = getenv ("flashchecksum"); if (s && (*s == 'y')) { printf (" CRC: %08X", crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size) ); } putc ('\n'); # else /* !CONFIG_SYS_FLASH_CHECKSUM */ print_size (flash_size, "\n"); # endif /* CONFIG_SYS_FLASH_CHECKSUM */ } else { puts (failed); hang (); } bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */ bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */ #if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) /* Make a update of the Memctrl. */ update_flash_size (flash_size); #endif # if defined(CONFIG_OXC) || defined(CONFIG_RMU) /* flash mapped at end of memory map */ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size; # elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */ # endif #endif /* !CONFIG_SYS_NO_FLASH */ WATCHDOG_RESET (); /* initialize higher level parts of CPU like time base and timers */ cpu_init_r (); WATCHDOG_RESET (); #ifdef CONFIG_SPI # if !defined(CONFIG_ENV_IS_IN_EEPROM) spi_init_f (); # endif spi_init_r (); #endif #if defined(CONFIG_CMD_NAND) WATCHDOG_RESET (); puts ("NAND: "); nand_init(); /* go init the NAND */ #endif #ifdef CONFIG_GENERIC_MMC /* * MMC initialization is called before relocating env. * Thus It is required that operations like pin multiplexer * be put in board_init. */ WATCHDOG_RESET (); puts ("MMC: "); mmc_initialize (bd); #endif /* relocate environment function pointers etc. */ env_relocate (); /* * Fill in missing fields of bd_info. * We do this here, where we have "normal" access to the * environment; we used to do this still running from ROM, * where had to use getenv_f(), which can be pretty slow when * the environment is in EEPROM. */ #if defined(CONFIG_SYS_EXTBDINFO) #if defined(CONFIG_405GP) || defined(CONFIG_405EP) #if defined(CONFIG_I2CFAST) /* * set bi_iic_fast for linux taking environment variable * "i2cfast" into account */ { char *s = getenv ("i2cfast"); if (s && ((*s == 'y') || (*s == 'Y'))) { bd->bi_iic_fast[0] = 1; bd->bi_iic_fast[1] = 1; } } #endif /* CONFIG_I2CFAST */ #endif /* CONFIG_405GP, CONFIG_405EP */ #endif /* CONFIG_SYS_EXTBDINFO */ #if defined(CONFIG_SC3) sc3_read_eeprom(); #endif #if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET) mac_read_from_eeprom(); #endif #ifdef CONFIG_HERMES if ((gd->board_type >> 16) == 2) bd->bi_ethspeed = gd->board_type & 0xFFFF; else bd->bi_ethspeed = 0xFFFF; #endif #ifdef CONFIG_CMD_NET /* kept around for legacy kernels only ... ignore the next section */ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr); #ifdef CONFIG_HAS_ETH1 eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr); #endif #ifdef CONFIG_HAS_ETH2 eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr); #endif #ifdef CONFIG_HAS_ETH3 eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr); #endif #ifdef CONFIG_HAS_ETH4 eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr); #endif #ifdef CONFIG_HAS_ETH5 eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr); #endif #endif /* CONFIG_CMD_NET */ /* IP Address */ bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); WATCHDOG_RESET (); #if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) /* * Do pci configuration */ pci_init (); #endif /** leave this here (after malloc(), environment and PCI are working) **/ /* Initialize stdio devices */ stdio_init (); /* Initialize the jump table for applications */ jumptable_init (); #if defined(CONFIG_API) /* Initialize API */ api_init (); #endif /* Initialize the console (after the relocation and devices init) */ console_init_r (); #if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ misc_init_r (); #endif #ifdef CONFIG_HERMES if (bd->bi_ethspeed != 0xFFFF) hermes_start_lxt980 ((int) bd->bi_ethspeed); #endif #if defined(CONFIG_CMD_KGDB) WATCHDOG_RESET (); puts ("KGDB: "); kgdb_init (); #endif debug ("U-Boot relocated to %08lx\n", dest_addr); /* * Enable Interrupts */ interrupt_init (); #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif udelay (20); set_timer (0); /* Initialize from environment */ if ((s = getenv ("loadaddr")) != NULL) { load_addr = simple_strtoul (s, NULL, 16); } #if defined(CONFIG_CMD_NET) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } #endif WATCHDOG_RESET (); #if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */ dtt_init (); #endif #if defined(CONFIG_CMD_SCSI) WATCHDOG_RESET (); puts ("SCSI: "); scsi_init (); #endif #if defined(CONFIG_CMD_DOC) WATCHDOG_RESET (); puts ("DOC: "); doc_init (); #endif #ifdef CONFIG_BITBANGMII bb_miiphy_init(); #endif #if defined(CONFIG_CMD_NET) #if defined(CONFIG_NET_MULTI) WATCHDOG_RESET (); puts ("Net: "); #endif eth_initialize (bd); #endif #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) WATCHDOG_RESET (); debug ("Reset Ethernet PHY\n"); reset_phy (); #endif #ifdef CONFIG_POST post_run (NULL, POST_RAM | post_bootmode_get(0)); #endif #if defined(CONFIG_CMD_PCMCIA) \ && !defined(CONFIG_CMD_IDE) WATCHDOG_RESET (); puts ("PCMCIA:"); pcmcia_init (); #endif #if defined(CONFIG_CMD_IDE) WATCHDOG_RESET (); # ifdef CONFIG_IDE_8xx_PCCARD puts ("PCMCIA:"); # else puts ("IDE: "); #endif #if defined(CONFIG_START_IDE) if (board_start_ide()) ide_init (); #else ide_init (); #endif #endif #ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET (); /* * Some parts can be only initialized if all others (like * Interrupts) are up and running (i.e. the PC-style ISA * keyboard). */ last_stage_init (); #endif #if defined(CONFIG_CMD_BEDBUG) WATCHDOG_RESET (); bedbug_init (); #endif #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) /* * Export available size of memory for Linux, * taking into account the protected RAM at top of memory */ { ulong pram; uchar memsz[32]; #ifdef CONFIG_PRAM char *s; if ((s = getenv ("pram")) != NULL) { pram = simple_strtoul (s, NULL, 10); } else { pram = CONFIG_PRAM; } #else pram=0; #endif #ifdef CONFIG_LOGBUFFER #ifndef CONFIG_ALT_LB_ADDR /* Also take the logbuffer into account (pram is in kB) */ pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024; #endif #endif sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram); setenv ("mem", (char *)memsz); } #endif #ifdef CONFIG_PS2KBD puts ("PS/2: "); kbd_init(); #endif #ifdef CONFIG_MODEM_SUPPORT { extern int do_mdm_init; do_mdm_init = gd->do_mdm_init; } #endif /* Initialization complete - start the monitor */ /* main_loop() can return to retry autoboot, if so just run it again. */ for (;;) { WATCHDOG_RESET (); main_loop (); } /* NOTREACHED - no way out of command loop except booting */ } void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); show_boot_progress(-30); for (;;); } #if 0 /* We could use plain global data, but the resulting code is bigger */ /* * Pointer to initial global data area * * Here we initialize it. */ #undef XTRN_DECLARE_GLOBAL_DATA_PTR #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); #endif /* 0 */ /************************************************************************/