/* SPDX-License-Identifier: GPL-2.0+ */ /* * Board configuration file for Dragonboard 410C * * (C) Copyright 2015 Mateusz Kulikowski */ #ifndef __CONFIGS_DRAGONBOARD410C_H #define __CONFIGS_DRAGONBOARD410C_H #include #include /* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */ /* Physical Memory Map */ #define PHYS_SDRAM_1 0x80000000 /* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */ #define PHYS_SDRAM_1_SIZE SZ_1G #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_BOOTM_LEN SZ_64M /* UART */ /* Fixup - in init code we switch from device to host mode, * it has to be done after each HCD reset */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ func(DHCP, dhcp, na) #include /* Does what recovery does */ #define REFLASH(file, part) \ "part start mmc 0 "#part" start && "\ "part size mmc 0 "#part" size && "\ "tftp $loadaddr "#file" && " \ "mmc write $loadaddr $start $size && " #define CONFIG_ENV_REFLASH \ "mmc dev 0 && "\ "usb start && "\ "dhcp && "\ "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\ "mmc write $loadaddr 0 43 && " \ "mmc rescan && "\ REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\ REFLASH(dragonboard/rescue/sbl1.mbn, 2)\ REFLASH(dragonboard/rescue/rpm.mbn, 3)\ REFLASH(dragonboard/rescue/tz.mbn, 4)\ REFLASH(dragonboard/rescue/hyp.mbn, 5)\ REFLASH(dragonboard/rescue/sec.dat, 6)\ REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\ REFLASH(dragonboard/u-boot.img, 8)\ "usb stop &&"\ "echo Reflash completed" /* Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ "reflash="CONFIG_ENV_REFLASH"\0"\ "loadaddr=0x81000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "linux_image=Image\0" \ "kernel_addr_r=0x81000000\0"\ "fdtfile=qcom/apq8016-sbc.dtb\0" \ "fdt_addr_r=0x83000000\0"\ "ramdisk_addr_r=0x84000000\0"\ "scriptaddr=0x90000000\0"\ "pxefile_addr_r=0x90100000\0"\ BOOTENV #endif