// SPDX-License-Identifier: GPL-2.0 /* * https://beagleboard.org/ai-64 * * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation */ #include "k3-binman.dtsi" / { memory@80000000 { bootph-all; }; /* Keep the LEDs on by default to indicate life */ leds { bootph-all; led-0 { default-state = "on"; bootph-all; }; led-1 { default-state = "on"; bootph-all; }; led-2 { default-state = "on"; bootph-all; }; led-3 { default-state = "on"; bootph-all; }; led-4 { default-state = "on"; bootph-all; }; }; }; &cbass_main { bootph-all; }; &main_navss { bootph-all; }; &cbass_mcu_wakeup { bootph-all; chipid@43000014 { bootph-all; }; }; &mcu_navss { bootph-all; }; &mcu_ringacc { reg = <0x0 0x2b800000 0x0 0x400000>, <0x0 0x2b000000 0x0 0x400000>, <0x0 0x28590000 0x0 0x100>, <0x0 0x2a500000 0x0 0x40000>, <0x0 0x28440000 0x0 0x40000>; reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; bootph-all; }; &mcu_udmap { reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x284c0000 0x0 0x4000>, <0x0 0x2a800000 0x0 0x40000>, <0x0 0x284a0000 0x0 0x4000>, <0x0 0x2aa00000 0x0 0x40000>, <0x0 0x28400000 0x0 0x2000>; reg-names = "gcfg", "rchan", "rchanrt", "tchan", "tchanrt", "rflow"; bootph-all; }; &secure_proxy_main { bootph-all; }; &dmsc { bootph-all; k3_sysreset: sysreset-controller { compatible = "ti,sci-sysreset"; bootph-all; }; }; &k3_pds { bootph-all; }; &k3_clks { bootph-all; }; &k3_reset { bootph-all; }; &wkup_pmx0 { bootph-all; }; &main_pmx0 { bootph-all; }; &main_uart0 { bootph-all; }; &main_gpio0 { bootph-all; }; &main_uart0_pins_default { bootph-all; }; &main_sdhci0 { bootph-all; }; &main_sdhci1 { bootph-all; sdhci-caps-mask = <0x00000007 0x00000000>; /delete-property/ cd-gpios; /delete-property/ cd-debounce-delay-ms; /delete-property/ ti,fails-without-test-cd; /delete-property/ no-1-8-v; }; &main_mmc1_pins_default { bootph-all; }; &mcu_cpsw { bootph-all; }; &davinci_mdio { bootph-all; }; &phy0 { bootph-all; }; &serdes2 { bootph-all; }; &serdes_ln_ctrl { bootph-all; }; &serdes2_usb_link { bootph-all; }; &usb_serdes_mux { bootph-all; }; &serdes_wiz2 { bootph-all; }; &main_usbss1_pins_default { bootph-all; }; &mcu_usbss1_pins_default { bootph-all; }; &usbss1 { bootph-all; }; &usb1 { bootph-all; }; &wkup_i2c0_pins_default { bootph-all; }; &wkup_i2c0 { bootph-all; }; #ifdef CONFIG_TARGET_J721E_A72_BEAGLEBONEAI64 #define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_J721E_BBAI64_DTB "spl/dts/k3-j721e-beagleboneai64.dtb" #define UBOOT_NODTB "u-boot-nodtb.bin" #define J721E_BBAI64_DTB "arch/arm/dts/k3-j721e-beagleboneai64.dtb" &binman { ti-dm { filename = "ti-dm.bin"; blob-ext { filename = "ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f"; }; }; ti-spl_unsigned { filename = "tispl.bin_unsigned"; pad-byte = <0xff>; fit { description = "Configuration to load ATF and SPL"; #address-cells = <1>; images { atf { description = "ARM Trusted Firmware"; type = "firmware"; arch = "arm64"; compression = "none"; os = "arm-trusted-firmware"; load = ; entry = ; atf-bl31 { filename = "bl31.bin"; }; }; tee { description = "OP-TEE"; type = "tee"; arch = "arm64"; compression = "none"; os = "tee"; load = <0x9e800000>; entry = <0x9e800000>; tee-os { filename = "tee-raw.bin"; }; }; dm { description = "DM binary"; type = "firmware"; arch = "arm32"; compression = "none"; os = "DM"; load = <0x89000000>; entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; spl { description = "SPL (64-bit)"; type = "standalone"; os = "U-Boot"; arch = "arm64"; compression = "none"; load = ; entry = ; blob-ext { filename = SPL_NODTB; }; }; fdt-0 { description = "k3-j721e-beagleboneai64"; type = "flat_dt"; arch = "arm"; compression = "none"; blob { filename = SPL_J721E_BBAI64_DTB; }; }; }; configurations { default = "conf-0"; conf-0 { description = "k3-j721e-beagleboneai64"; firmware = "atf"; loadables = "tee", "dm", "spl"; fdt = "fdt-0"; }; }; }; }; u-boot_unsigned { filename = "u-boot.img_unsigned"; pad-byte = <0xff>; fit { description = "FIT image with multiple configurations"; images { uboot { description = "U-Boot for j721e board"; type = "firmware"; os = "u-boot"; arch = "arm"; compression = "none"; load = ; blob { filename = UBOOT_NODTB; }; hash { algo = "crc32"; }; }; fdt-0 { description = "k3-j721e-beagleboneai64"; type = "flat_dt"; arch = "arm"; compression = "none"; blob { filename = J721E_BBAI64_DTB; }; hash { algo = "crc32"; }; }; }; configurations { default = "conf-0"; conf-0 { description = "k3-j721e-beagleboneai64"; firmware = "uboot"; loadables = "uboot"; fdt = "fdt-0"; }; }; }; }; }; #endif