/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * Configuation settings for the AT91SAM9263EK board. */ #ifndef __CONFIG_H #define __CONFIG_H #include /* * SoC must be defined first, before hardware.h is included. * In this case SoC is defined in boards.cfg. */ #include /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH #else #define CONFIG_SYS_USE_NORFLASH #endif /* * Hardware drivers */ #define CONFIG_ATMEL_LEGACY /* LCD */ #define LCD_BPP LCD_COLOR8 #define CONFIG_LCD_LOGO 1 #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 #define CONFIG_ATMEL_LCD 1 #define CONFIG_ATMEL_LCD_BGR555 1 /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 #define CONFIG_SYS_INIT_SP_ADDR \ (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* NOR flash, if populated */ #ifdef CONFIG_SYS_USE_NORFLASH #define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MONITOR_SEC 1:0-3 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Address and size of Primary Environment Sector */ #define CONFIG_EXTRA_ENV_SETTINGS \ "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ "update=" \ "protect off ${monitor_base} +${filesize};" \ "erase ${monitor_base} +${filesize};" \ "cp.b ${fileaddr} ${monitor_base} ${filesize};" \ "protect on ${monitor_base} +${filesize}\0" #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define MASTER_PLL_MUL 171 #define MASTER_PLL_DIV 14 #define MASTER_PLL_OUT 3 /* clocks */ #define CONFIG_SYS_MOR_VAL \ (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) #define CONFIG_SYS_PLLAR_VAL \ (AT91_PMC_PLLAR_29 | \ AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ AT91_PMC_PLLXR_PLLCOUNT(63) | \ AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR1_VAL \ (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR2_VAL \ (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* define PDC[31:16] as DATA[31:16] */ #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 /* no pull-up for D[31:16] */ #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ #define CONFIG_SYS_MATRIX_EBICSA_VAL \ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ #define CONFIG_SYS_SDRC_MR_VAL1 0 /* SDRAMC_TR - Refresh Timer register */ #define CONFIG_SYS_SDRC_TR_VAL1 0x13C /* SDRAMC_CR - Configuration register*/ #define CONFIG_SYS_SDRC_CR_VAL \ (AT91_SDRAMC_NC_9 | \ AT91_SDRAMC_NR_13 | \ AT91_SDRAMC_NB_4 | \ AT91_SDRAMC_CAS_3 | \ AT91_SDRAMC_DBW_32 | \ (1 << 8) | /* Write Recovery Delay */ \ (7 << 12) | /* Row Cycle Delay */ \ (2 << 16) | /* Row Precharge Delay */ \ (2 << 20) | /* Row to Column Delay */ \ (5 << 24) | /* Active to Precharge Delay */ \ (1 << 28)) /* Exit Self Refresh to Active Delay */ /* Memory Device Register -> SDRAM */ #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ #define CONFIG_SYS_SMC0_SETUP0_VAL \ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) #define CONFIG_SYS_SMC0_MODE0_VAL \ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ AT91_SMC_MODE_DBW_16 | \ AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ AT91_RSTC_MR_URSTEN | \ AT91_RSTC_MR_ERSTL(15)) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ AT91_WDT_MR_WDV(0xfff) | \ AT91_WDT_MR_WDDIS | \ AT91_WDT_MR_WDD(0xfff)) #endif #include #endif /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 1 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 #endif /* Ethernet */ #define CONFIG_RESET_PHY_R 1 #define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ #elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env + linux in nandflash */ #endif #endif