// SPDX-License-Identifier: GPL-2.0+ /* * (C) Copyright 2014-2016 * Stefan Agner */ #include #include #include #include #include #include #include #include #include #include #include #include #include "pinmux-config-colibri_t30.h" #include "../common/tdx-common.h" int arch_misc_init(void) { if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == NVBOOTTYPE_RECOVERY) printf("USB recovery mode\n"); return 0; } int checkboard(void) { puts("Model: Toradex Colibri T30 1GB\n"); return tdx_checkboard(); } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { u8 enetaddr[6]; /* MAC addr */ if (eth_env_get_enetaddr("ethaddr", enetaddr)) { int err = fdt_find_and_setprop(blob, "/usb@7d004000/ethernet@1", "local-mac-address", enetaddr, 6, 0); /* Older device trees might have used a different node name */ if (err < 0) err = fdt_find_and_setprop(blob, "/usb@7d004000/asix@1", "local-mac-address", enetaddr, 6, 0); if (err >= 0) puts(" MAC address updated...\n"); } return ft_common_board_setup(blob, bd); } #endif /* * Routine: pinmux_init * Description: Do individual peripheral pinmux configs */ void pinmux_init(void) { pinmux_config_pingrp_table(tegra3_pinmux_common, ARRAY_SIZE(tegra3_pinmux_common)); pinmux_config_pingrp_table(unused_pins_lowpower, ARRAY_SIZE(unused_pins_lowpower)); /* Initialize any non-default pad configs (APB_MISC_GP regs) */ pinmux_config_drvgrp_table(colibri_t30_padctrl, ARRAY_SIZE(colibri_t30_padctrl)); } /* * Disable RS232 serial transceiver ForceOFF# pins on Iris */ void gpio_early_init_uart(void) { gpio_request(TEGRA_GPIO(X, 6), "Force OFF# X13"); gpio_direction_output(TEGRA_GPIO(X, 6), 1); gpio_request(TEGRA_GPIO(X, 7), "Force OFF# X14"); gpio_direction_output(TEGRA_GPIO(X, 7), 1); } /* * Enable AX88772B USB to LAN controller */ void pin_mux_usb(void) { /* Reset ASIX using LAN_RESET */ gpio_request(TEGRA_GPIO(DD, 0), "LAN_RESET"); gpio_direction_output(TEGRA_GPIO(DD, 0), 0); udelay(5); gpio_set_value(TEGRA_GPIO(DD, 0), 1); } /* * Backlight off before OS handover */ void board_preboot_os(void) { gpio_request(TEGRA_GPIO(V, 2), "BL_ON"); gpio_direction_output(TEGRA_GPIO(V, 2), 0); }