// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2016 Freescale Semiconductor, Inc. */ #include #include #include #include #include #include #include #include #include #ifdef CONFIG_FSL_LS_PPA #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/qixis.h" #include "ls1012aqds_qixis.h" #include "ls1012aqds_pfe.h" #include DECLARE_GLOBAL_DATA_PTR; int checkboard(void) { char buf[64]; u8 sw; sw = QIXIS_READ(arch); printf("Board Arch: V%d, ", sw >> 4); printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]); if (sw & QIXIS_LBMAP_ALTBANK) printf("flash: 2\n"); else printf("flash: 1\n"); printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver), qixis_read_tag(buf), (int)qixis_read_minor()); /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); return 0; } #ifdef CONFIG_TFABOOT int dram_init(void) { gd->ram_size = tfa_get_dram_size(); if (!gd->ram_size) gd->ram_size = CONFIG_SYS_SDRAM_SIZE; return 0; } #else int dram_init(void) { static const struct fsl_mmdc_info mparam = { 0x05180000, /* mdctl */ 0x00030035, /* mdpdc */ 0x12554000, /* mdotc */ 0xbabf7954, /* mdcfg0 */ 0xdb328f64, /* mdcfg1 */ 0x01ff00db, /* mdcfg2 */ 0x00001680, /* mdmisc */ 0x0f3c8000, /* mdref */ 0x00002000, /* mdrwd */ 0x00bf1023, /* mdor */ 0x0000003f, /* mdasp */ 0x0000022a, /* mpodtctrl */ 0xa1390003, /* mpzqhwctrl */ }; mmdc_init(&mparam); gd->ram_size = CONFIG_SYS_SDRAM_SIZE; #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif return 0; } #endif int board_early_init_f(void) { fsl_lsch2_early_init_f(); return 0; } #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { u8 mux_sdhc_cd = 0x80; int bus_num = 0; #if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret; ret = i2c_get_chip_for_busnum(bus_num, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev); if (ret) { printf("%s: Cannot find udev for a bus %d\n", __func__, bus_num); return ret; } dm_i2c_write(dev, 0x5a, &mux_sdhc_cd, 1); #else i2c_set_bus_num(bus_num); i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1); #endif return 0; } #endif int board_init(void) { struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + CONFIG_SYS_CCI400_OFFSET); /* Set CCI-400 control override register to enable barrier * transaction */ if (current_el() == 3) out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 erratum_a010315(); #endif #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif #ifdef CONFIG_FSL_CAAM sec_init(); #endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif return 0; } #ifdef CONFIG_FSL_PFE void board_quiesce_devices(void) { pfe_command_stop(0, NULL); } #endif int esdhc_status_fixup(void *blob, const char *compat) { char esdhc0_path[] = "/soc/esdhc@1560000"; char esdhc1_path[] = "/soc/esdhc@1580000"; u8 card_id; do_fixup_by_path(blob, esdhc0_path, "status", "okay", sizeof("okay"), 1); /* * The Presence Detect 2 register detects the installation * of cards in various PCI Express or SGMII slots. * * STAT_PRS2[7:5]: Specifies the type of card installed in the * SDHC2 Adapter slot. 0b111 indicates no adapter is installed. */ card_id = (QIXIS_READ(present2) & 0xe0) >> 5; /* If no adapter is installed in SDHC2, disable SDHC2 */ if (card_id == 0x7) do_fixup_by_path(blob, esdhc1_path, "status", "disabled", sizeof("disabled"), 1); else do_fixup_by_path(blob, esdhc1_path, "status", "okay", sizeof("okay"), 1); return 0; } static int pfe_set_properties(void *set_blob, struct pfe_prop_val prop_val, char *enet_path, char *mdio_path) { do_fixup_by_path(set_blob, enet_path, "fsl,gemac-bus-id", &prop_val.busid, PFE_PROP_LEN, 1); do_fixup_by_path(set_blob, enet_path, "fsl,gemac-phy-id", &prop_val.phyid, PFE_PROP_LEN, 1); do_fixup_by_path(set_blob, enet_path, "fsl,mdio-mux-val", &prop_val.mux_val, PFE_PROP_LEN, 1); do_fixup_by_path(set_blob, enet_path, "phy-mode", prop_val.phy_mode, strlen(prop_val.phy_mode) + 1, 1); do_fixup_by_path(set_blob, mdio_path, "fsl,mdio-phy-mask", &prop_val.phy_mask, PFE_PROP_LEN, 1); return 0; } static void fdt_fsl_fixup_of_pfe(void *blob) { int i = 0; struct pfe_prop_val prop_val; void *l_blob = blob; struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; unsigned int srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; for (i = 0; i < NUM_ETH_NODE; i++) { switch (srds_s1) { case SERDES_1_G_PROTOCOL: if (i == 0) { prop_val.busid = cpu_to_fdt32( ETH_1_1G_BUS_ID); prop_val.phyid = cpu_to_fdt32( ETH_1_1G_PHY_ID); prop_val.mux_val = cpu_to_fdt32( ETH_1_1G_MDIO_MUX); prop_val.phy_mask = cpu_to_fdt32( ETH_1G_MDIO_PHY_MASK); prop_val.phy_mode = "sgmii"; pfe_set_properties(l_blob, prop_val, ETH_1_PATH, ETH_1_MDIO); } else { prop_val.busid = cpu_to_fdt32( ETH_2_1G_BUS_ID); prop_val.phyid = cpu_to_fdt32( ETH_2_1G_PHY_ID); prop_val.mux_val = cpu_to_fdt32( ETH_2_1G_MDIO_MUX); prop_val.phy_mask = cpu_to_fdt32( ETH_1G_MDIO_PHY_MASK); prop_val.phy_mode = "rgmii"; pfe_set_properties(l_blob, prop_val, ETH_2_PATH, ETH_2_MDIO); } break; case SERDES_2_5_G_PROTOCOL: if (i == 0) { prop_val.busid = cpu_to_fdt32( ETH_1_2_5G_BUS_ID); prop_val.phyid = cpu_to_fdt32( ETH_1_2_5G_PHY_ID); prop_val.mux_val = cpu_to_fdt32( ETH_1_2_5G_MDIO_MUX); prop_val.phy_mask = cpu_to_fdt32( ETH_2_5G_MDIO_PHY_MASK); prop_val.phy_mode = "sgmii-2500"; pfe_set_properties(l_blob, prop_val, ETH_1_PATH, ETH_1_MDIO); } else { prop_val.busid = cpu_to_fdt32( ETH_2_2_5G_BUS_ID); prop_val.phyid = cpu_to_fdt32( ETH_2_2_5G_PHY_ID); prop_val.mux_val = cpu_to_fdt32( ETH_2_2_5G_MDIO_MUX); prop_val.phy_mask = cpu_to_fdt32( ETH_2_5G_MDIO_PHY_MASK); prop_val.phy_mode = "sgmii-2500"; pfe_set_properties(l_blob, prop_val, ETH_2_PATH, ETH_2_MDIO); } break; default: printf("serdes:[%d]\n", srds_s1); } } } #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, struct bd_info *bd) { arch_fixup_fdt(blob); ft_cpu_setup(blob, bd); fdt_fsl_fixup_of_pfe(blob); return 0; } #endif