// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2017 Microchip Corporation * Wenyou Yang */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern void at91_pda_detect(void); DECLARE_GLOBAL_DATA_PTR; static void rgb_leds_init(void) { atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 0); /* LED RED */ atmel_pio4_set_pio_output(AT91_PIO_PORTB, 8, 0); /* LED GREEN */ atmel_pio4_set_pio_output(AT91_PIO_PORTB, 6, 1); /* LED BLUE */ } #ifdef CONFIG_NAND_ATMEL static void board_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; at91_periph_clk_enable(ATMEL_ID_HSMC); /* Configure SMC CS3 for NAND */ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), &smc->cs[3].setup); writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(4) | AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3), &smc->cs[3].pulse); writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(5), &smc->cs[3].cycle); writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) | AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) | AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3) | AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings); writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | AT91_SMC_MODE_EXNW_DISABLE | AT91_SMC_MODE_DBW_8 | AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); atmel_pio4_set_b_periph(AT91_PIO_PORTA, 22, ATMEL_PIO_DRVSTR_ME); /* D0 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 23, ATMEL_PIO_DRVSTR_ME); /* D1 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 24, ATMEL_PIO_DRVSTR_ME); /* D2 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 25, ATMEL_PIO_DRVSTR_ME); /* D3 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 26, ATMEL_PIO_DRVSTR_ME); /* D4 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 27, ATMEL_PIO_DRVSTR_ME); /* D5 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 28, ATMEL_PIO_DRVSTR_ME); /* D6 */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 29, ATMEL_PIO_DRVSTR_ME); /* D7 */ atmel_pio4_set_b_periph(AT91_PIO_PORTB, 2, 0); /* RE */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 30, 0); /* WE */ atmel_pio4_set_b_periph(AT91_PIO_PORTA, 31, ATMEL_PIO_PUEN_MASK); /* NCS */ atmel_pio4_set_b_periph(AT91_PIO_PORTC, 8, ATMEL_PIO_PUEN_MASK); /* RDY */ atmel_pio4_set_b_periph(AT91_PIO_PORTB, 0, ATMEL_PIO_PUEN_MASK); /* ALE */ atmel_pio4_set_b_periph(AT91_PIO_PORTB, 1, ATMEL_PIO_PUEN_MASK); /* CLE */ } #endif #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { at91_pda_detect(); return 0; } #endif #ifdef CONFIG_CMD_USB static void board_usb_hw_init(void) { atmel_pio4_set_pio_output(AT91_PIO_PORTB, 12, ATMEL_PIO_PUEN_MASK); } #endif #ifdef CONFIG_DEBUG_UART_BOARD_INIT static void board_uart0_hw_init(void) { atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, ATMEL_PIO_PUEN_MASK); /* URXD0 */ atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */ at91_periph_clk_enable(ATMEL_ID_UART0); } void board_debug_uart_init(void) { board_uart0_hw_init(); } #endif #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { return 0; } #endif int board_init(void) { /* address of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; rgb_leds_init(); #ifdef CONFIG_NAND_ATMEL board_nand_hw_init(); #endif #ifdef CONFIG_CMD_USB board_usb_hw_init(); #endif return 0; } int dram_init(void) { gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } #define AT24MAC_MAC_OFFSET 0xfa #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { #ifdef CONFIG_I2C_EEPROM at91_set_ethaddr(AT24MAC_MAC_OFFSET); #endif return 0; } #endif