// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2012 Renesas Solutions Corp. */ #include #include #include #include #include #include #include #include #include #include #include #include int checkboard(void) { puts("BOARD: SH7753 EVB\n"); return 0; } static void init_gpio(void) { struct gpio_regs *gpio = GPIO_BASE; struct sermux_regs *sermux = SERMUX_BASE; /* GPIO */ writew(0x0000, &gpio->pacr); /* GETHER */ writew(0x0001, &gpio->pbcr); /* INTC */ writew(0x0000, &gpio->pccr); /* PWMU, INTC */ writew(0x0000, &gpio->pdcr); /* SPI0 */ writew(0xeaff, &gpio->pecr); /* GPIO */ writew(0x0000, &gpio->pfcr); /* WDT */ writew(0x0004, &gpio->pgcr); /* SPI0, GETHER MDIO gate(PTG1) */ writew(0x0000, &gpio->phcr); /* SPI1 */ writew(0x0000, &gpio->picr); /* SDHI */ writew(0x0000, &gpio->pjcr); /* SCIF4 */ writew(0x0003, &gpio->pkcr); /* SerMux */ writew(0x0000, &gpio->plcr); /* SerMux */ writew(0x0000, &gpio->pmcr); /* RIIC */ writew(0x0000, &gpio->pncr); /* USB, SGPIO */ writew(0x0000, &gpio->pocr); /* SGPIO */ writew(0xd555, &gpio->pqcr); /* GPIO */ writew(0x0000, &gpio->prcr); /* RIIC */ writew(0x0000, &gpio->pscr); /* RIIC */ writew(0x0000, &gpio->ptcr); /* STATUS */ writeb(0x00, &gpio->pudr); writew(0x5555, &gpio->pucr); /* Debug LED */ writew(0x0000, &gpio->pvcr); /* RSPI */ writew(0x0000, &gpio->pwcr); /* EVC */ writew(0x0000, &gpio->pxcr); /* LBSC */ writew(0x0000, &gpio->pycr); /* LBSC */ writew(0x0000, &gpio->pzcr); /* eMMC */ writew(0xfe00, &gpio->psel0); writew(0x0000, &gpio->psel1); writew(0x3000, &gpio->psel2); writew(0xff00, &gpio->psel3); writew(0x771f, &gpio->psel4); writew(0x0ffc, &gpio->psel5); writew(0x00ff, &gpio->psel6); writew(0xfc00, &gpio->psel7); writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */ } static void init_usb_phy(void) { struct usb_common_regs *common0 = USB0_COMMON_BASE; struct usb_common_regs *common1 = USB1_COMMON_BASE; struct usb0_phy_regs *phy = USB0_PHY_BASE; struct usb1_port_regs *port = USB1_PORT_BASE; struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE; writew(0x0100, &phy->reset); /* set reset */ /* port0 = USB0, port1 = USB1 */ writew(0x0002, &phy->portsel); writel(0x0001, &port->port1sel); /* port1 = Host */ writew(0x0111, &phy->reset); /* clear reset */ writew(0x4000, &common0->suspmode); writew(0x4000, &common1->suspmode); #if defined(__LITTLE_ENDIAN) writel(0x00000000, &align->ehcidatac); writel(0x00000000, &align->ohcidatac); #endif } static void init_gether_mdio(void) { struct gpio_regs *gpio = GPIO_BASE; writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr); writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */ } static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) { struct ether_mac_regs *ether; unsigned char mac[6]; unsigned long val; string_to_enetaddr(mac_string, mac); if (!channel) ether = GETHER0_MAC_BASE; else ether = GETHER1_MAC_BASE; val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; writel(val, ðer->mahr); val = (mac[4] << 8) | mac[5]; writel(val, ðer->malr); } #if defined(CONFIG_SH_32BIT) /***************************************************************** * This PMB must be set on this timing. The lowlevel_init is run on * Area 0(phys 0x00000000), so we have to map it. * * The new PMB table is following: * ent virt phys v sz c wt * 0 0xa0000000 0x40000000 1 128M 0 1 * 1 0xa8000000 0x48000000 1 128M 0 1 * 2 0xb0000000 0x50000000 1 128M 0 1 * 3 0xb8000000 0x58000000 1 128M 0 1 * 4 0x80000000 0x40000000 1 128M 1 1 * 5 0x88000000 0x48000000 1 128M 1 1 * 6 0x90000000 0x50000000 1 128M 1 1 * 7 0x98000000 0x58000000 1 128M 1 1 */ static void set_pmb_on_board_init(void) { struct mmu_regs *mmu = MMU_BASE; /* clear ITLB */ writel(0x00000004, &mmu->mmucr); /* delete PMB for SPIBOOT */ writel(0, PMB_ADDR_BASE(0)); writel(0, PMB_DATA_BASE(0)); /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ /* ppn ub v s1 s0 c wt */ writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0)); writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0)); writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2)); writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2)); writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3)); writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3)); writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4)); writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4)); writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6)); writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6)); writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7)); writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7)); } #endif int board_init(void) { struct gether_control_regs *gether = GETHER_CONTROL_BASE; init_gpio(); #if defined(CONFIG_SH_32BIT) set_pmb_on_board_init(); #endif /* Sets TXnDLY to B'010 */ writel(0x00000202, &gether->gbecont); init_usb_phy(); init_gether_mdio(); return 0; } int board_mmc_init(bd_t *bis) { struct gpio_regs *gpio = GPIO_BASE; writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr); writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */ udelay(1); writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */ udelay(200); return mmcif_mmc_init(); } static int get_sh_eth_mac_raw(unsigned char *buf, int size) { #ifdef CONFIG_DEPRECATED struct spi_flash *spi; int ret; spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); if (spi == NULL) { printf("%s: spi_flash probe failed.\n", __func__); return 1; } ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf); if (ret) { printf("%s: spi_flash read failed.\n", __func__); spi_flash_free(spi); return 1; } spi_flash_free(spi); #endif return 0; } static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf) { memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)], SH7753EVB_ETHERNET_MAC_SIZE); mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */ return 0; } static void init_ethernet_mac(void) { char mac_string[64]; char env_string[64]; int i; unsigned char *buf; buf = malloc(256); if (!buf) { printf("%s: malloc failed.\n", __func__); return; } get_sh_eth_mac_raw(buf, 256); /* Gigabit Ethernet */ for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { get_sh_eth_mac(i, mac_string, buf); if (i == 0) env_set("ethaddr", mac_string); else { sprintf(env_string, "eth%daddr", i); env_set(env_string, mac_string); } set_mac_to_sh_giga_eth_register(i, mac_string); } free(buf); } int board_late_init(void) { init_ethernet_mac(); return 0; } #ifdef CONFIG_DEPRECATED int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { int i, ret; char mac_string[256]; struct spi_flash *spi; unsigned char *buf; if (argc != 3) { buf = malloc(256); if (!buf) { printf("%s: malloc failed.\n", __func__); return 1; } get_sh_eth_mac_raw(buf, 256); /* print current MAC address */ for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { get_sh_eth_mac(i, mac_string, buf); printf("GETHERC ch%d = %s\n", i, mac_string); } free(buf); return 0; } /* new setting */ memset(mac_string, 0xff, sizeof(mac_string)); sprintf(mac_string, "%s\t%s", argv[1], argv[2]); /* write MAC data to SPI rom */ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); if (!spi) { printf("%s: spi_flash probe failed.\n", __func__); return 1; } ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI, SH7753EVB_SPI_SECTOR_SIZE); if (ret) { printf("%s: spi_flash erase failed.\n", __func__); return 1; } ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI, sizeof(mac_string), mac_string); if (ret) { printf("%s: spi_flash write failed.\n", __func__); spi_flash_free(spi); return 1; } spi_flash_free(spi); puts("The writing of the MAC address to SPI ROM was completed.\n"); return 0; } U_BOOT_CMD( write_mac, 3, 1, do_write_mac, "write MAC address for GETHERC", "[GETHERC ch0] [GETHERC ch1]\n" ); #endif