/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2012 * Linaro * Linus Walleij <linus.walleij@linaro.org> * Common ARM Integrator configuration settings */ #define CFG_SYS_TIMERBASE 0x13000100 /* Timer1 */ /* * The ARM boot monitor initializes the board. * However, the default U-Boot code also performs the initialization. * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT * - see documentation supplied with board for details of how to choose the * image to run at reset/power up * e.g. whether the ARM Boot Monitor runs before U-Boot */ /* * The ARM boot monitor does not relocate U-Boot. * However, the default U-Boot code performs the relocation check, * and may relocate the code if the memory map is changed. * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT */ /* #define SKIP_CONFIG_RELOCATE_UBOOT */ /* * Physical Memory Map */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* * FLASH and environment organization * Top varies according to amount fitted * Reserve top 4 blocks of flash * - ARM Boot Monitor * - Unused * - SIB block * - U-Boot environment */ #define CFG_SYS_FLASH_BASE 0x24000000 /* Timeout values in ticks */