// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2011 - 2015 Xilinx * Copyright (C) 2012 National Instruments Corp. */ /dts-v1/; #include "zynq-7000.dtsi" / { model = "Xilinx ZC702 board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; spi0 = &qspi; mmc0 = &sdhci0; usb0 = &usb0; }; memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; chosen { bootargs = ""; stdout-path = "serial0:115200n8"; }; gpio-keys { compatible = "gpio-keys"; autorepeat; sw14 { label = "sw14"; gpios = <&gpio0 12 0>; linux,code = <108>; /* down */ wakeup-source; autorepeat; }; sw13 { label = "sw13"; gpios = <&gpio0 14 0>; linux,code = <103>; /* up */ wakeup-source; autorepeat; }; }; leds { compatible = "gpio-leds"; led-ds23 { label = "ds23"; gpios = <&gpio0 10 0>; linux,default-trigger = "heartbeat"; }; }; usb_phy0: phy0 { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; }; &can0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_default>; }; &clkc { ps-clk-frequency = <33333333>; }; &gem0 { status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem0_default>; phy-reset-gpio = <&gpio0 11 0>; phy-reset-active-low; ethernet_phy: ethernet-phy@7 { reg = <7>; device_type = "ethernet-phy"; }; }; &gpio0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio0_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; scl-gpios = <&gpio0 50 0>; sda-gpios = <&gpio0 51 0>; i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x74>; i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; si570: clock-generator@5d { #clock-cells = <0>; compatible = "silabs,si570"; temperature-stability = <50>; reg = <0x5d>; factory-fout = <156250000>; clock-frequency = <148500000>; }; }; i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; adv7511: hdmi-tx@39 { compatible = "adi,adv7511"; reg = <0x39>; adi,input-depth = <8>; adi,input-colorspace = "yuv422"; adi,input-clock = "1x"; adi,input-style = <3>; adi,input-justification = "right"; }; }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; }; i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; gpio-controller; #gpio-cells = <2>; }; }; i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; }; i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; hwmon@34 { compatible = "ti,ucd9248"; reg = <0x34>; }; hwmon@35 { compatible = "ti,ucd9248"; reg = <0x35>; }; hwmon@36 { compatible = "ti,ucd9248"; reg = <0x36>; }; }; }; }; &pinctrl0 { pinctrl_can0_default: can0-default { mux { function = "can0"; groups = "can0_9_grp"; }; conf { groups = "can0_9_grp"; slew-rate = <0>; power-source = <1>; }; conf-rx { pins = "MIO46"; bias-high-impedance; }; conf-tx { pins = "MIO47"; bias-disable; }; }; pinctrl_gem0_default: gem0-default { mux { function = "ethernet0"; groups = "ethernet0_0_grp"; }; conf { groups = "ethernet0_0_grp"; slew-rate = <0>; power-source = <4>; }; conf-rx { pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; bias-high-impedance; low-power-disable; }; conf-tx { pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; bias-disable; low-power-enable; }; mux-mdio { function = "mdio0"; groups = "mdio0_0_grp"; }; conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; power-source = <1>; bias-disable; }; }; pinctrl_gpio0_default: gpio0-default { mux { function = "gpio0"; groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", "gpio0_13_grp", "gpio0_14_grp"; }; conf { groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", "gpio0_13_grp", "gpio0_14_grp"; slew-rate = <0>; power-source = <1>; }; conf-pull-up { pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; bias-pull-up; }; conf-pull-none { pins = "MIO7", "MIO8"; bias-disable; }; }; pinctrl_i2c0_default: i2c0-default { mux { groups = "i2c0_10_grp"; function = "i2c0"; }; conf { groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; power-source = <1>; }; }; pinctrl_i2c0_gpio: i2c0-gpio { mux { groups = "gpio0_50_grp", "gpio0_51_grp"; function = "gpio0"; }; conf { groups = "gpio0_50_grp", "gpio0_51_grp"; slew-rate = <0>; power-source = <1>; }; }; pinctrl_sdhci0_default: sdhci0-default { mux { groups = "sdio0_2_grp"; function = "sdio0"; }; conf { groups = "sdio0_2_grp"; slew-rate = <0>; power-source = <1>; bias-disable; }; mux-cd { groups = "gpio0_0_grp"; function = "sdio0_cd"; }; conf-cd { groups = "gpio0_0_grp"; bias-high-impedance; bias-pull-up; slew-rate = <0>; power-source = <1>; }; mux-wp { groups = "gpio0_15_grp"; function = "sdio0_wp"; }; conf-wp { groups = "gpio0_15_grp"; bias-high-impedance; bias-pull-up; slew-rate = <0>; power-source = <1>; }; }; pinctrl_uart1_default: uart1-default { mux { groups = "uart1_10_grp"; function = "uart1"; }; conf { groups = "uart1_10_grp"; slew-rate = <0>; power-source = <1>; }; conf-rx { pins = "MIO49"; bias-high-impedance; }; conf-tx { pins = "MIO48"; bias-disable; }; }; pinctrl_usb0_default: usb0-default { mux { groups = "usb0_0_grp"; function = "usb0"; }; conf { groups = "usb0_0_grp"; slew-rate = <0>; power-source = <1>; }; conf-rx { pins = "MIO29", "MIO31", "MIO36"; bias-high-impedance; }; conf-tx { pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", "MIO35", "MIO37", "MIO38", "MIO39"; bias-disable; }; }; }; &qspi { u-boot,dm-pre-reloc; status = "okay"; num-cs = <1>; flash@0 { compatible = "n25q128a11", "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; }; }; &sdhci0 { u-boot,dm-pre-reloc; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { u-boot,dm-pre-reloc; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; }; &usb0 { status = "okay"; dr_mode = "host"; usb-phy = <&usb_phy0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; };