Commit graph

7947 commits

Author SHA1 Message Date
Bo Shen
ff255e836a ARM: atmel: at91sam9n12ek: enable spl support
Enable SPL support for at91sam9n12ek boards, now it supports
boot up from NAND flash, serial flash.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:31 +02:00
Bo Shen
d85e8914b3 ARM: atmel: at91sam9x5ek: enable spl support
Enable SPL support for at91sam9x5ek board. Now, it supports
boot up from NAND flash and SPI flash.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:31 +02:00
Bo Shen
41d41a93fb ARM: atmel: at91sam9m10g45ek: enable spl support
Supports boot up from NAND flash with software ECC eanbled.
And supports boot up from SD/MMC card with FAT file system.

As the boot from SD/MMC card with FAT file system, the BSS
segment is too big to fit into SRAM, so, use the lds to put
it into SDRAM.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:30 +02:00
Wu, Josh
23ac62d4c7 ARM: at91: at91sam9n12ek: save the environment to a fat file in MMC card
Insteading in mmc's raw sectors, this patch will save the environment
in a fat file (uboot.env) in mmc card's first FAT patition by default.

If you want to save in mmc's raw sectors, you only need to define
CONFIG_ENV_IS_IN_MMC.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:29 +02:00
Heiko Schocher
55ebd0c1ca arm, at91: corvus: move MACH_TYPE to defconfig
move MACH_TYPE into defconfig

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-04-01 01:04:28 +02:00
Iain Paton
e71b422bd7 sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock
make the CPU clock selectable via Kconfig

this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each
soc header and replaces it's use in board/sunxi/board.c with
CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board
specific frequency on boot

Signed-off-by: Iain Paton <ipaton0@gmail.com>
[hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the
 arch-timer clk speed on sun7i to fix mis-compile on sun7i]
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-03-29 13:36:03 +02:00
Anatolij Gustschin
5db752353b powerpc: ppc4xx: convert AMCC boards to generic board
Add CONFIG_SYS_GENERIC_BOARD to amcc-common.h and CONFIG_DISPLAY_BOARDINFO
to Kconfig files. canyonlands.h includes amcc-common.h, so remove
CONFIG_SYS_GENERIC_BOARD definition there.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Feng Kan <fkan@amcc.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Tom Rini <trini@konsulko.com>
2015-03-28 12:09:46 -04:00
angelo@sysam.it
944ab340b6 m68k: fix 3 broken boards
Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error.
These boards have video but don't need any ppc related
video_setmem().

Fix M53017EVB moving away embedded env to a different offset,
as in M52277EVB.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-03-28 12:07:46 -04:00
Linus Walleij
03314f0e24 vexpress64: cut config and defaults for unclear variant
This variant that is neither FVP / Base Model or Juno Versatile
Express 64bit is confusing. Get rid of it unless someone can
point out what machine that really is. Seems to be an evolutional
artifact in the config base.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-28 12:07:46 -04:00
Linus Walleij
49995ffe81 vexpress64: remove board late init, use smhload
This removes the kludgy late board init from the FVP simulator
version of Versatile Express 64bit (ARMv8), and replace it with
a default boot command using the new smhload command to load
the files using semihosting. Tested on the Foundation Model.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-28 12:07:45 -04:00
maxin.john@enea.com
3b6e484122 ARM: omap4_panda: enable saveenv command
Enable saveenv command and the configs to store environment
persistently in the SD card.

Tested on OMAP4 Panda (OMAP4460 ES1.1)

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-03-28 12:07:44 -04:00
Masahiro Yamada
4cbd29284d m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk
Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf547x_8x/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
f47fb6b4a0 m68k: mcf523x: move CPU type to Kconfig and refactor config.mk
Move the CPU type config options from include/configs/M5235EVB.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf523x/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
2bb1cd53e9 m68k: mcf5227x: move CPU type to Kconfig and refactor config.mk
Move the CPU type config options from include/configs/M52277EVB.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf5227x/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
7f8ebbf095 m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk
This commit intends to stop grepping CPU type in
arch/m68k/cpu/mcf5445x/config.mk.

Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf5445x/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
c155ab74f7 m68k: mcf532x: move CPU type to Kconfig and refactor config.mk
This commit intends to stop grepping CPU type in
arch/m68k/cpu/mcf532x/config.mk.

Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf532x/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
bdde659516 m68k: mcf530x: move CPU type to Kconfig and refactor config.mk
This commit intends to stop grepping CPU type in
arch/m68k/cpu/mcf530x/config.mk.

Move the CPU type config options from include/configs/amcore.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf530x/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
d4a9b17df5 m68k: mcf52x2: move CPU type to Kconfig and refactor config.mk
This commit intends to stop grepping CPU type in
arch/m68k/cpu/mcf52x2/config.mk.

Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf52x2/config.mk.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Angelo Dureghello <angelo@sysam.it>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
326a682358 malloc_f: enable SYS_MALLOC_F by default if DM is on
This option has a bool type, not hex.
Fix it and enable it if CONFIG_DM is on because Driver Model always
requires malloc memory.  Devices are scanned twice, before/after
relocation.  CONFIG_SYS_MALLOC_F should be enabled to use malloc
memory before relocation.  As it is board-independent, handle it
globally.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Robert Baldyga <r.baldyga@samsung.com>
2015-03-28 09:03:09 -04:00
Masahiro Yamada
0a9e7ee5bd generic-board: select SYS_GENERIC_BOARD for some architectures
We have done with the generic board conversion for all the boards
of ARC, Blackfin, M68000, MicroBlaze, MIPS, NIOS2, Sandbox, X86.

Let's select SYS_GENERIC_BOARD for those architectures, so we can
tell which architecture has finished the conversion at a glance.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-28 09:03:08 -04:00
Bin Meng
6f1eba49a5 x86: Add ramboot and nfsboot commands in x86-common.h
It is very common in the debug stage to test U-Boot loading a linux
kernel. The commands to boot linux kernel with ramdisk and nfs as the
root are common to all x86 targets, so it makes sense to add them as
the U-Boot default environment in x86-common.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chroimum.org>
2015-03-24 21:22:38 -06:00
Bin Meng
bea59393c8 x86: galileo: Enable saving environment in SPI flash
Saving U-Boot's environment in SPI flash on Intel Galileo board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sg@chromium.org>
2015-03-24 21:22:38 -06:00
Bin Meng
fba02d69c6 x86: crownbay: Enable saving environment in SPI flash
Saving U-Boot's environment in SPI flash on Intel CrownBay board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sg@chromium.org>
2015-03-24 21:22:38 -06:00
Bin Meng
a84134f721 x86: crownbay: Enable Intel Topcliff GMAC support
Intel Crown Bay board has one ethernet port connected from Intel
Topcliff PCH. Enable it in the board configuration.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-03-24 21:22:38 -06:00
Bin Meng
e4ad6031a7 x86: quark: Enable on-chip ethernet controllers
Intel Quark SoC integrates two 10/100 ethernet controllers which can
be connected to an external RMII PHY. The MAC IP is from Designware.
Enable this support with the existing U-Boot Designware MAC driver
so that the ethernet port on Intel Galileo board can be used.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-03-24 21:22:37 -06:00
Masahiro Yamada
def3feb8cb ARM: UniPhier: add empty lowlevel_init to U-boot proper
To remove the ifdef conditional of CONFIG_SKIP_LOWLEVEL_INIT,
add late_lowlevel_init.S to U-Boot proper.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:48 +09:00
Masahiro Yamada
8cddc27965 ARM: UniPhier: move init stack area just below TEXT_BASE
There is no good reason to have the 0x1000 gap between
CONFIG_SYS_INIT_SP_ADDR and CONFIG_SYS_TEXT_BASE.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:44 +09:00
Masahiro Yamada
6a3cffe8e1 ARM: UniPhier: add CONFIG_SPL_MAX_FOOTPRINT
The Boot ROM of UniPhier platform only loads 64KB image.  We should
always make sure that SPL memory footprint is less than that.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:40 +09:00
Masahiro Yamada
ce3a63905b ARM: UniPhier: use CONFIG_SPL_STACK to define SPL stack pointer
Ifdef conditionals for CONFIG options are not Kconfig-friendly.
Instead, define CONFIG_SPL_STACK to prepare for Kconfig moves.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:38 +09:00
Masahiro Yamada
499785b970 ARM: UniPhier: enable Driver Model and UART on SPL
Enable CONFIG_SPL_DM and CONFIG_SPL_SERIAL_SUPPORT, which provide
Driver Model UART support on SPL.

CONFIG_SYS_SPL_MALLOC_{START,SIZE} should be dropped because simple
malloc is preferred on SPL.  Dlmalloc requires some static variables
on .data section that is not available yet for NOR boot mode etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:35 +09:00
Masahiro Yamada
a286039b13 ARM: UniPhier: enable CONFIG_PANIC_HANG
Do not reset board on panic, which allows us to not link reset_cpu()
into SPL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:32 +09:00
Tom Rini
e6f4042a04 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2015-03-20 07:01:00 -04:00
Bo Shen
993ea97e76 ARM: atmel: armv7: move spl lds to armv7 directory
As the u-boot-spl.lds is used only for armv7 SoCs (includes
sama5d3 and sama5d4), so move it to armv7 directory.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-03-18 23:36:07 +01:00
Bo Shen
06dfbc0e50 ARM: atmel: sama5d4 boards: fix spl lds location
As the u-boot-spl.lds is moved to <arch/arm/mach-at91> directory.
So, correct the path for sama5d4 related boards.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-03-18 23:36:05 +01:00
Wu, Josh
0b12843493 ARM: at91: at91sam9rlek: add mmc environment configuration
Add a mmc default config, which will save the environment in a FAT file
(uboot.env) of MMC.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
2015-03-18 23:36:02 +01:00
Wu, Josh
111ec4c652 ARM: at91: at91sam9rlek: add mci support
This patch enable the MCI support for at91sam9rlek board.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[rebase on ToT]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-03-18 23:36:01 +01:00
Wu, Josh
65b553b71c ARM: at91: at91sam9rlek: update the default nand flash configs
Update the nand flash offset mapping, default nand bootcmand and
bootargs to align with linux4sam.org.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-03-18 23:35:57 +01:00
Tom Rini
a538ae997a Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-03-18 07:07:43 -04:00
Kim Phillips
fdfaa29e49 mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
Boards that haven't been converted to GENERIC_BOARD does
*not* mean they should be removed.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2015-03-17 15:21:15 -04:00
Masahiro Yamada
5043045ded powerpc: ppc4xx: remove korat board support
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Larry Johnson <lrj@acm.org>
2015-03-17 11:00:26 -04:00
Masahiro Yamada
41eb4e5c31 powerpc: mpc5xxx: remove galaxy5200 board support
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Eric Millbrandt <emillbrandt@dekaresearch.com>
2015-03-17 11:00:22 -04:00
Masahiro Yamada
6beecd5d09 powerpc: ppc4xx: remove W7OLMC/W7OLMG board support
They have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Erik Theisen <etheisen@mindspring.com>
2015-03-17 11:00:17 -04:00
Masahiro Yamada
470ee8b125 powerpc: mpc5xxx: remove aev, TB5200 board support
They have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-17 11:00:03 -04:00
Masahiro Yamada
2da8137b45 powerpc: ppc4xx: remove JSE board support
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Williams <steve@icarus.com>
2015-03-17 10:59:57 -04:00
Masahiro Yamada
f8296d6975 powerpc: mpc5xxx: remove BC3450 board support
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-17 10:59:53 -04:00
Hannes Petermaier
e52e9cc77f board/BuR/common: use SYS_CONSOLE_OVERWRITE
We don't want that CONSOLE is redirected to LCD upon init, we rather prefer
that console is still on the serial line.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-17 10:55:07 -04:00
Hannes Petermaier
1d6be49a87 board/BuR/common: fix compiler warning
Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-16 15:20:59 -04:00
Sekhar Nori
e736570cc3 beagle_x15: increase phy autoneg timeout
When Beagle X15 is connected to Gigabit switch, it takes
more time to finish auto-negotiation than on a 10/100 switch.

The default 4 second limit times-out more often than not. This is
observed when testing with a D-Link DGS-1008A desktop switch.

Increase the auto-negotiation time-out for Beagle-X15 to handle
this case.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-13 09:29:36 -04:00
Nishanth Menon
cdef0b3f3a ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766
RX51 has a secure logic which uses different parameters compared to
traditional implementation. So, make the generic secure acr write
over-ride-able by board file and refactor rx51 code to use this.

While at it, enable the OMAP3 specific errata code for 454179, 430973,
621766.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-13 09:29:33 -04:00
Nishanth Menon
c6f90e1418 ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
Enable the OMAP3 specific errata code for 454179, 430973, 621766
and while at it, remove legacy non-revision checked errata logic.

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-13 09:29:24 -04:00