With the Linux and U-Boot board dtb files unified, we now have a
duplicate main_uart0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified we now have a
duplicate mcu_uart0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Ethernet is one of a few IPs in U-Boot that depend on DMA to operate.
However there are a few missing registers ranges in the udmap nodes
need to properly setup DMA for the am65x.
A fix has been added to the Linux kernel[0] to add these ranges however
they have not made it to a Linux tag. To keep DMA operational until the
next DT sync from Linux, add these ranges to the *-u-boot.dtsi with a
note for our future selves.
[0] https://lore.kernel.org/r/20231213135138.929517-2-vigneshr@ti.com
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate mcu_udmap node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate mcu_ringacc node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
timer1 is really just the mcu_timer0 node redefined for the WKUP SPL.
Remove the timer1 and replace it with the mcu_timer0 from the Linux
device tree we imported into U-Boot.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board files unified, we now have a duplicate
wkup_uart0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified we now have a
duplicate vtt_supply node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
To make things as organized as possible, start from the Linux board dtbs
and apply all properties needed for U-Boot in our *-u-boot.dtsi file for
the MAIN SPL and U-Boot builds.
We can then include these files for the WKUP SPL build making further
edits to the needed properties and nodes for the WKUP SPL bootloader's
view of the am65x.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
In order to unify the R5 board dtb file with the Linux board dtb file,
we will need to copy all bootph-pre-ram properties to the *-u-boot.dtsi
overlay.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Pull in dtb updates for the am654 base board from v6.7-rc1 of Linux
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
The R5 board file for U-Boot should be the same as the board file copied
from Linux with a few alterations to work with the R5's view of the SoC.
First we need to unify the R5 board file and it's U-Boot overlay before
we can unify the Linux board file with this one.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
We do not have a need to share a single console with the evaluation
board and disabling this option reduces the complexity of configuring
the consoles. Disable CONSOLE_MUX
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Some of the regulators we need to successfully boot are fixed
regulators. Enable the driver to properly probe them.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
TEGRA114_CLK_MIPI_CAL is a fixed child of PLLP and is used
as clock source of the MIPI PHY calibration mechanism.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Recently, the U-Boot installation process has changed significantly.
This should be depicted in documentation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
align bloblist with v0.9 of Firmware Handoff spec
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmWS9jwRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreZvYggAnc11fzAPnWZK5Nz7RxqoT1vMl/xAaSMJ
gKaL8V0vAY7I0s3+jMoEfed29OAIkxs68nfEV0Hu4RKc2ER6gIYjun5VOP8G6B9j
B1S/IbWgMtz+Vn/TQNy72zbWcU/FeypU2ZICAEN7v1hksjZoM7jbytLa/OkPjSA1
ONEIZTwYL+pXFSneAcXU1cugQX2RO+L5gYNlZF8yv6Jb5DQj0noOvhbvW1s9XvF3
VognW1UVDmBr0KPaJVufMm0YGaurwsjeb7SaKzgk/9CUY+j6AqpfqqBaK6+KoPku
MOjyc7shsxmJsBiLVflzSVE7WAvlTcRN6hLzoJd/4JVs+/fazz9P1A==
=b5aT
-----END PGP SIGNATURE-----
Merge tag 'dm-next-1124' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
support propagating supernode properties with bootph schema
align bloblist with v0.9 of Firmware Handoff spec
Align the documentation with the v0.9 spec.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Allow the alignment to be specified when creating a bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The v0.9 spec provides for a 24-byte header. Update the implementation
to match this.
Rename the fields of the bloblist header to align to the spec.
Adds an alignment field into the bloblist header.
Update the related bloblist APIs and UT testcases.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The v0.9 spec provides for an 8-byte header for each blob, with fewer
fields.
The blob data start address should be aligned to the alignment specified
by the bloblist header.
Update the implementation to match this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Rather than setting the alignment using the header size, add an entirely
new entry to cover the gap left by the alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use a sinple 8-bit checksum for bloblist, as specified by the spec
version 0.9.
Spec v0.9 specifies that the entire bloblist area is checksummed,
including unused portions. Update the code to follow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Drop spare value from bloblist record header.
For now it is still present in the header, with an underscore, so that
tests continue to pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Convert accesses to tag and hdr_size via function for grouping tag and
hdr_size together later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The new bloblist for v0.9 has version 1 so update this value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This uses a new value with spec v0.9 so change it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The updated bloblist structure stores the alignment as a power-of-two
value in its structures. Adjust the API to use this, to avoid needing to
calling ilog2().
Update the bloblist alignment from 16 bytes to 8 bytes.
Drop a stale comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Align bloblist tags with the FW handoff spec v0.9.
The most common ones are from 0.
TF related ones are from 0x100.
All non-standard ones from 0xfff000.
Added new defined tags:
BLOBLISTT_OPTEE_PAGABLE_PART for TF.
BLOBLISTT_TPM_EVLOG and BLOBLISTT_TPM_CRB_BASE for TPM.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use this flag so that the bootph binding is obeyed correctly.
Add a comment about what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/12
Reviewed-by: Tom Rini <trini@konsulko.com>
The existing bootph binding is defined such that properties in a
subnode are also implied in the supernode also, as in this example:
buttons {
/* bootph,pre-ram is implied by btn1 */
compatible = "gpio-keys";
btn1 {
bootph,pre-ram;
gpios = <&gpio_a 3 0>;
label = "button1";
linux,code = <BTN_1>;
};
Provide an option to implement this in fdtgrep.
Signed-off-by: Simon Glass <sjg@chromium.org>
With sandbox, CONFIG_SANDBOX is y so the current rule ends up building
the devicetree for only those SPL builds where it is unwanted.
Correct the condition. This allows sandbox_vpl to produce a
u-boot-vpl.dtb file.
Fixes: e7fb789612 ("sandbox: Remove OF_HOSTFILE")
Signed-off-by: Simon Glass <sjg@chromium.org>
The h_include() function includes a piece which checks if a node
contains a property being searched for. Move this into its own
function to reduce the size of the h_include() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
The code to invert the match in h_include() is a bit convoluted.
Simplify it by using disp->invert only once.
Signed-off-by: Simon Glass <sjg@chromium.org>
Two of the flags are out of order, so fix this.
Also adjust the ordering of one flag in the main switch()
Signed-off-by: Simon Glass <sjg@chromium.org>
Pytest 7.4.3 complains if a variable is used in a finally clause without
having been initialized before the try clause.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Francis Laniel <francis.laniel@amarulasolutions.com> says:
During 2021 summer, Sean Anderson wrote a contribution to add a new shell, based
on LIL, to U-Boot [1, 2].
While one of the goals of this contribution was to address the fact actual
U-Boot shell, which is based on Busybox hush, is old there was a discussion
about adding a new shell versus updating the actual one [3, 4].
So, in this series, with Harald Seiler, we updated the actual U-Boot shell to
reflect what is currently in Busybox source code.
Basically, this contribution is about taking a snapshot of Busybox shell/hush.c
file (as it exists in commit 37460f5da) and adapt it to suit U-Boot needs.
This contribution was written to be as backward-compatible as possible to avoid
breaking the existing.
So, the modern hush flavor offers the same as the actual, that is to say:
1. Variable expansion.
2. Instruction lists (;, && and ||).
3. If, then and else.
4. Loops (for, while and until).
No new features offered by Busybox hush were implemented (e.g. functions).
It is possible to change the parser at runtime using the "cli" command:
=> cli print
old
=> cli set modern
=> cli print
modern
=> cli set old
The default parser is the old one.
Note that to use both parser, you would need to set both
CONFIG_HUSH_MODERN_PARSER and CONFIG_HUSH_OLD_PARSER.
In terms of testing, new unit tests were added to ut to ensure the new behavior
is the same as the old one and it does not add regression.
Nonetheless, if old behavior was buggy and fixed upstream, the fix is then added
to U-Boot [5].
In sandbox, all of these tests pass smoothly:
=> printenv board
board=sandbox
=> ut hush
Running 20 hush tests
...
Failures: 0
=> cli set modern
=> ut hush
Running 20 hush tests
...
Failures: 0
Thanks to the effort of Harald Seiler, I was successful booting a board:
=> printenv fdtfile
fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb
=> cli get
old
=> boot
...
root@lepotato:~#
root@lepotato:~# reboot
...
=> cli set modern
=> cli get
modern
=> printenv fdtfile
fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb
=> boot
...
root@lepotato:~#
This contribution indeed adds a lot of code and there were concern about its
size [6, 7].
With regard to the amount of code added, the cli_hush_upstream.c is 13030 lines
long but it seems a smaller subset is really used:
gcc -D__U_BOOT__ -E common/cli_hush_upstream.c | wc -l
2870
Despite this, it is better to still have the whole upstream code for the sake of
easing maintenance.
With regard to memory size, I conducted some experiments for version 8 of this
series and for a subset of arm64 boards and found the worst case to be 4K [8].
Tom Rini conducted more research on this and also found the increase to be
acceptable [9].
If you want to review it - your review will really be appreciated - here are
some information regarding the commits:
* commits marked as "test:" deal with unit tests.
* commit "cli: Add Busybox upstream hush.c file." copies Busybox shell/hush.c
into U-Boot tree, this explain why this commit contains around 12000 additions.
* commit "cli: Port Busybox 2021 hush to U-Boot." modifies previously added file
to permit us to use this as new shell.
The really good idea of #include'ing Busybox code into a wrapper file to define
some particular functions while minimizing modifications to upstream code comes
from Harald Seiler.
* commit "cmd: Add new parser command" adds a new command which permits
selecting parser at runtime.
I am not really satisfied with the fact it calls cli_init() and cli_loop() each
time the parser is set, so your reviews would be welcomed.
* Other commits focus on enabling features we need (e.g. if).
The keymile board family is not compatible with modern hush parser.
Indeed, This boards used set_local_var() to store some variables as local shell.
They then used get_local_var() to retrieve the variables values.
Sadly, this two functions do not exist with CONFIG_HUSH_MODERN_PARSER.
A patch was proposed to use environment variables rather than local variables
but it does not tackle the problem, so complementary work is needed to make
this boards use CONFIG_HUSH_MODERN_PARSER.
Also, with CONFIG_HUSH_MODERN_PARSER, kirkwoord sheevaplug and phytec bk4r1 hit
their board limits, so better to stick with old hush.
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Link: https://marc.info/?l=u-boot&m=165541917618725&w=2
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
This commit adds the following hush busybox upstream commits:
791b222dd55d ("sleep: fix "sleep -- ARGS"")
5353df91cba7 ("Update applet size estimates")
e41e481fd571 ("hush: fix a compile failure")
07a95cfcabb0 ("ash: disable check for "good" function name, bash does not check this")
e5692e2342c6 ("hush: quote values in "readonly" output")
96769486e20f ("shell: move varcmp() to shell_common.h and use it in hush")
bab8828b0dad ("hush: fix expansion of space in "a=${a:+$a }c" construct")
b5be8da350b5 ("hush: make "false" built-in")
6824298ab4d3 ("hush: fix ELIF cmd1;cmd2 THEN ... not executing cmd2, closes 15571")
3a7f00eadcf4 ("hush: add comment about abort on syntax error %{^}")
acae889dd972 ("ash,hush: tab completion of functions and aliases")
90b607d79a13 ("hush: quote variable values printed by "set" (match ash behavior)")
6748e6494c22 ("hush (NOMMU): fix LINENO in execed children")
fd5fb2d2b596 ("hush: speed up "big heredoc" code")
1409432d072e ("hush: add TODO comment")
93ae7464e6e4 ("hush: restore SIGHUP handling, this time explain why we do what we do")
1fdb33bd07e5 ("hush: restore tty pgrp on SIGHUP")
6101b6d3eaa0 ("hush: remove special handling of SIGHUP")
93e0898c663a ("shell: fix SIGWINCH and SIGCHLD (in hush) interrupting line input, closes 15256")
969e00816835 ("hush: code shrink")
27be0e8cfeb6 ("shell: fix compile failures in some configs")
7d1c7d833785 ("ash,hush: use HOME for tab completion and prompts")
21afddefd258 ("hush: fix "error: invalid preprocessing directive ##"")
e53c7dbafc78 ("hush: fix set -n to act immediately, not just after run_list()")
574b9c446da1 ("hush: fix var_LINENO3.tests failure")
49bcf9f40cff ("hush: speed up ${x//\*/|} too")
53b2fdcdba4c ("*: add NOINLINEs where code noticeably shrinks")
7c3e96d4b3d4 ("shell: use more compact SHELL_ASH / HUSH config defines. no code changes")
62f1eed1e191 ("hush: in a comment, document what -i might be doing")
aaf3d5ba74c5 ("shell: tweak --help")
db5546ca1018 ("libbb: code shrink: introduce and use [_]exit_SUCCESS()")
931c55f9e2b4 ("libbb: invert the meaning of SETUP_ENV_NO_CHDIR -> SETUP_ENV_CHDIR")
12566e7f9b5e ("ash,hush: fix handling of SIGINT while waiting for interactive input")
987be932ed3c ("*: slap on a few ALIGN_PTR where appropriate")
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Modifies return code got from while loop as modern hush always returns 0 from
while loop.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Enables the use of for, while and until loops for command line as
well as with run_command().
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adds support for "if then else" construct both for command line interface and
through run_command().
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In Busybox hush, '<' and '>' are used as redirection operators.
For example, cat foo > bar will write content of file foo inside file bar.
In U-Boot, we do not have file system, so we can hardly redirect command output
inside a file.
But, in actual U-Boot hush, these operators ('<' and '>') are used as string
compare operators.
For example, test aaa < bbb returns 0 as aaa is before bbb in the dictionary.
Busybox hush also permits this, but operators need to be escaped ('\<' and
'\>').
Indeed, if escaping is needed it permits the developer to think about its code,
as in a lot of case, we want to compare integers (using '-lt' or '-gt') rather
than strings.
As testing in U-Boot is handled by the test command, we will stick with the
original behaviour and not adapt to Busybox one.
Nonetheless, if one day we decide to implement test with '[[ ]]', we will then
stick to upstream Busybox behavior.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Modifies the expected result for modern hush.
Indeed, there were bugs in actual U-Boot hush which were fixed in upstream
Busybox.
As modern hush is based on upstream Busybox, these bugs no longer exist.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
