Commit graph

174 commits

Author SHA1 Message Date
Marek Vasut
8b493a5236 common: Discard the __u_boot_cmd section
The command declaration now uses the new LG-array method to generate
list of commands. Thus the __u_boot_cmd section is now superseded and
redundant and therefore can be removed. Also, remove externed symbols
associated with this section from include/command.h .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Marek Vasut
556751427b common: Add .u_boot_list into all linker files
Add section for the linker-generated lists into all possible linker
files, so that everyone can easily use these lists. This is mostly
a mechanical adjustment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Simon Glass
5e84e5a7d4 blackfin: Change global data baudrate to int
This doesn't need to be a long, so change it.

Also adjust bi_baudrate to be unsigned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Marek Vasut
036036d79c serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
Marek Vasut
41651cab97 serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTI
Rework the emulation of serial console via JTAG from simple ad-hoc
implementation of serial port routines to CONFIG_SERIAL_MULTI and
enable CONFIG_SERIAL_MULTI unconditionally for blackfin.

In order for the JTAG serial console to take precedence over all
other serial ports available in system, implement override for
default_serial_console call returning this JTAG serial console.

This brings in a bit of a growth of size, but eventually will allow
us to unconditionally enable CONFIG_SERIAL_MULTI throughout the whole
U-Boot and maintain only one serial subsystem.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-15 11:53:51 -07:00
Marek Vasut
5ae1de0d49 serial: bfin: Adjust serial_register_bfin_uart()
Rename the serial_register_bfin_uart() to bfin_initialize_serial()
to be consistent with the rest of the naming. Next, remove it's
prototype from serial.h and properly insert it into serial.c as
the rest of the serial initialization functions.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-15 11:53:50 -07:00
Marek Vasut
89143fb3b0 serial: Rename .init() and .uninit() in serial_device
Rename .init() to .start() and .uninit() to .stop() in struct
serial_device. This allows aligning struct serial_device with
closer to struct stdio_dev. The real goal here is to allow
these two structures to converge together and eventually make
one to be a superset of the other.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:48 -07:00
Marek Vasut
5368c55d4c COMMON: Use __stringify() instead of MK_STR()
Kill multiple occurances and redeclaration of MK_STR
in favor of __stringify().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:47 -07:00
Stefan Roese
0044c42e94 Consolidate bootcount code into drivers/bootcount
This patch moves all bootcount implementations into a common
directory: drivers/bootcount. The generic bootcount driver
is now usable not only by powerpc platforms, but others as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Cc: Manfred Rudigier <manfred.rudigier@omicron.at>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Tested-by: Christian Riesch <christian.riesch@omicron.at>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-09-01 14:26:02 +02:00
Mike Frysinger
47fde91f0c global_data: unify global flag defines
All the global flag defines are the same across all arches.  So unify them
in one place, and add a simple way for arches to extend for their needs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 21:46:32 +02:00
Mike Frysinger
42c6e9ad1b Blackfin: easylogo: add lzma logos
The bf527-ezkit boards are getting too big to fit into their reserved
flash space, so we need to use a lzma compressed logo.

Since the video driver code is very similar, add lzma compressed support
to all of the Blackfin video drivers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-03 20:44:54 -05:00
Tom Rini
26750c8aee CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file.  This is used when a board has not set its
own table.

Signed-off-by: Tom Rini <trini@ti.com>
2012-06-20 20:26:16 +02:00
Mike Frysinger
de30122bb5 net: move bootfile init into eth_initialize
All arches init this the same way, so move the logic into the core
net code to avoid duplicating it everywhere else.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:33 -05:00
Mike Frysinger
50a47d0523 net: punt bd->bi_ip_addr
This field gets read in one place (by "bdinfo"), and we can replace
that with getenv("ipaddr").  After all, the bi_ip_addr field is kept
up-to-date implicitly with the value of the ipaddr env var.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:05 -05:00
Mike Frysinger
a4932d7877 Blackfin: move gd/bd to bss by default
We don't need these setup manually, so let the bss do the rest.  On
Blackfin systems, we clear the bss before executing any C code that
would use these, so this should be fine.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-22 13:00:19 -04:00
Mike Frysinger
33e7e60c77 Blackfin: gd_t: relocate volatile markings
This makes Blackfin behave the same as other ports, and fixes many gcc
warnings that show up with 4.5+:
	board.c:40:1: warning: optimization may eliminate reads and/or
		writes to register variables

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-22 13:00:19 -04:00
Macpaul Lin
273d11eae5 linkage.h: move from blackfin to common includes
1. Add linkage.h support from blackfin to common include,
   which is a reduced version from Linux.
2. Add architecture part support of linkage.h into blackfin
3. Fix include path of in blackfin related to linkage.h
   due to header file movement.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:03:26 -05:00
Mike Frysinger
dae2242ada Blackfin: add in/out le32 variants
These are rarely used, but the post code does currently, so add small
redirect hacks for that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:03:25 -05:00
Mike Frysinger
e29ad970f1 Blackfin: cache result of cpp check
Avoid overhead of computing this value multiple times.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 22:13:26 -05:00
Mike Frysinger
ff1a618ad2 Blackfin: traps: fix up printf warnings from debug
Cast uint32_t to void* for %p, and use %zu for size_t.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 22:13:26 -05:00
Mike Frysinger
710aa76227 Blackfin: drop now unused local variable
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18 22:13:25 -05:00
Simon Glass
c1f485a1e8 blackfin: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:33:18 +02:00
Mike Frysinger
8e5c1edadf Blackfin: define CONFIG_SYS_CACHELINE_SIZE
Common U-Boot API wants this define, so import asm/cache.h from Linux
to provide suitable defines.

Acked-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-16 14:22:19 -04:00
Mike Frysinger
476af299b0 image: push default arch values to arch headers
This pushes the ugly duplicated arch ifdef lists we maintain in various
image related files out to the arch headers themselves.

Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:15 +02:00
Valentin Longchamp
79843950b2 POST: add post_log_res field for post results in global data
The current post_log_word in global data is currently split into 2x
16 bits: half for the test start, half for the test success.
Since we alredy have more than 16 POST tests defined and more could
be defined, this may result in an overflow and the post_output_backlog
would not work for the tests defined further of these 16 positions.

An additional field is added to global data so that we can now support up
to 32 (depending of architecture) tests. The post_log_word is only used
to record the start of the test and the new field post_log_res for the
test success (or failure). The post_output_backlog is for this change
also adapted.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2011-10-05 22:03:10 +02:00
Graeme Russ
9558b48af0 console: Implement pre-console buffer
Allow redirection of console output prior to console initialisation to a
temporary buffer.

To enable this functionality, the board (or arch) must define:
 - CONFIG_PRE_CONSOLE_BUFFER - Enable pre-console buffer
 - CONFIG_PRE_CON_BUF_ADDR - Base address of pre-console buffer
 - CONFIG_PRE_CON_BUF_SZ - Size of pre-console buffer (in bytes)

The pre-console buffer will buffer the last CONFIG_PRE_CON_BUF_SZ bytes
Any earlier characters are silently dropped.
2011-10-05 22:03:09 +02:00
Mike Frysinger
90a75b050b Blackfin: uart: implement loop callback for post
This allows the Blackfin UART driver to be tested via post.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-29 16:38:05 -04:00
Mike Frysinger
2151374fa6 Blackfin: post: generalize led/button tests with GPIOs
Make it easy for any Blackfin board to enable led/push button tests.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-29 16:38:05 -04:00
Mike Frysinger
4257ea4efd Blackfin: post: drop custom test list
The few tests that are Blackfin-specific have been migrated to common
code or been rewritten with the existing "bsp-specific" defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-29 16:38:05 -04:00
Wolfgang Denk
1902692aa0 Merge branch 'master' of git://git.denx.de/u-boot-blackfin
* 'master' of git://git.denx.de/u-boot-blackfin:
  Blackfin: jtag-console: fix timer usage
  Blackfin: switch to common display_options()
  Blackfin: serial: move early debug strings into .rodata section
  Blackfin: adi boards: also set stderr to nc with helper
  Blackfin: update anomaly lists to latest public info
  Blackfin: serial: convert to bfin_{read,write} helpers
  Blackfin: split out async setup
  Blackfin: adi boards: enable pretty flash progress output
  Blackfin: drop unused dma.h header from start code
  Blackfin: portmux: allow header to be included in assembly files
  Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support
  Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings
  Blackfin: sync MMR read/write helpers with Linux
  Blackfin: gpio: optimize free path a little
  Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
  Blackfin: uart: fix printf warning
  Blackfin: add init.elf helper code
  Blackfin: dont reset SWRST on newer bf526 parts
  Blackfin: adi boards: enable multi serial support by default
  Blackfin: uart: add multiple serial support
  Blackfin: uart: move debug buffers into local bss
2011-08-02 21:46:53 +02:00
Andreas Bießmann
09c2e90c11 unify version_string
This patch removes the architecture specific implementation of
version_string where possible. Some architectures use a special place
and therefore we provide U_BOOT_VERSION_STRING definition and a common
weak symbol version_string.

Signed-off-by: Andreas Biemann <andreas.devel@googlemail.com>
CC: Mike Frysinger <vapier@gentoo.org>
CC: Peter Pan <pppeterpppan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28 17:22:53 +02:00
Graeme Russ
4769be21cc Timer: Remove reset_timer() for non-Nios2 arches 2011-07-26 14:53:30 +02:00
Daniel Schwierzeck
4e0fbb98fc Use ALL-y style instead of ifeq blocks for better readability
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-07-26 14:41:43 +02:00
Mike Frysinger
d8940a6544 Blackfin: jtag-console: fix timer usage
Reported-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
bb83875d5d Blackfin: switch to common display_options()
Use common code to output the version string rather than doing it
ourselves.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
e8e35efc8f Blackfin: serial: move early debug strings into .rodata section
Rewrite the assembly serial_early_puts() helper to place the strings
in the .rodata section rather than embedding them directly in the
.text section.  Using .text is a little simpler, but it doesn't let
people execute out of internal L1 sram (since core reads don't work
on those regions).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
bc9c64273d Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
b1e574d95b Blackfin: serial: convert to bfin_{read,write} helpers
Since the serial struct declares the sizes for us, no need to hardcode
them in the accessor functions.  Let the bfin_{read,write} helpers do
it for us.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
4150cec335 Blackfin: split out async setup
We really only need to tweak the async banks in the initcode if the
processor is booting out of it, otherwise we can wait until later
on in the CPU booting setup.

This also makes testing in the sim and early bring up over JTAG work
much smoother when the initcode gets bypassed.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
ed7496349d Blackfin: drop unused dma.h header from start code
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
f75e8b32ad Blackfin: portmux: allow header to be included in assembly files
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
7ed998f629 Blackfin: sync MMR read/write helpers with Linux
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
95b4b9d97a Blackfin: gpio: optimize free path a little
When we aren't doing resource tracking, the gpio_free() function is a
stub that simply returns, so pull this logic up a level and make it an
inline stub in the header.  Now we don't have to waste time at any of
the call sites.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
272d2fc2f5 Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
Set the default post word location to an L1 data location for all
Blackfin parts so things "just work" for most people.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
f9aee4b4b6 Blackfin: uart: fix printf warning
The code uses %i to printf a size_t when it should use %zu, otherwise
we get a warning from gcc about it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
fb5166ce35 Blackfin: add init.elf helper code
This creates a standalone ELF that executes just the Blackfin initcode.
This is useful for people who want to program the low level aspects of
the CPU (memory/clocks/etc...) and can easily be used with JTAG for
quick booting while developing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
08a82a447b Blackfin: dont reset SWRST on newer bf526 parts
The bug in the BF526 rom when doing a software reset exists only in older
silicon versions, so don't clear SWRST on newer parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
635f330fc7 Blackfin: uart: add multiple serial support
This brings CONFIG_SERIAL_MULTI support to the Blackfin on-chip UARTs.
Ends up adding only ~512bytes per additional UART.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
34a6d0b84a Blackfin: uart: move debug buffers into local bss
There's no need for these saved buffers to be global symbols, or in
the data section.  So mark them static to move them into the bss.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
9aeab10bd4 Blackfin: use on-chip reset func with newer parts
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset.  So when the on-chip rom has a
functioning reset helper, use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03 13:26:45 -04:00
Mike Frysinger
867f54cc35 Blackfin: use common LDSCRIPT logic
Now that common code is a bit smarter when it comes to default LDSCRIPT
values, rename the default Blackfin file and drop the Blackfin-specific
config.mk logic.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03 13:26:45 -04:00
Mike Frysinger
a972b8d701 gpio: generalize for all generic gpio providers
The Blackfin gpio command isn't terribly Blackfin-specific.  So generalize
the few pieces into two new optional helpers:
	name_to_gpio() - turn a string name into a GPIO #
	gpio_status() - display current pin bindings (think /proc/gpio)

Once these pieces are pulled out, we can relocate the cmd_gpio.c into the
common directory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 15:56:51 -04:00
Wolfgang Denk
8ae86b76c6 Make STANDALONE_LOAD_ADDR configurable per board
Rename STANDALONE_LOAD_ADDR into CONFIG_STANDALONE_LOAD_ADDR
and allow that the architecture-specific default value gets
overwritten by defining the value in the board header file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Tsi Chung Liew <tsi-chung.liew@freescale.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-04-12 22:58:32 +02:00
Kyle Moffett
eed1a7b1cf Blackfin: replace "bfin_reset_or_hang()" with "panic()"
The bfin_reset_or_hang function unnecessarily duplicates the panic()
logic based on CONFIG_PANIC_HANG.

This patch deletes 20 lines of code and just calls panic() instead.
This also makes the following generic-restart conversion patch simpler.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
e8065f8889 Blackfin: bootrom.h: sync with toolchain
We need the updated LDR bit defines for our LDR utils.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
105be9078c Blackfin: default to L1 bank A when L1 bank B does not exist
Some parts lack Bank B in L1 data, so have the linker script fall back to
Bank A when that happens.  This way we can still leverage L1 data.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
c745a84648 Blackfin: turn off caches when self initializing
When bootstrapping ourselves on the fly at runtime (via "go"), we need to
turn off the caches to avoid taking software exceptions.  Since caches
need CPLBs and CPLBs need exception handlers, but we're about to rewrite
the code in memory where those exception handlers live, we need to turn
off caches first.

This new code also encourages a slight code optimization by storing the
MMR bases in dedicated registers so we don't have to fully load up the
pointer regs multiple times.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
05e7825e49 Blackfin: only check for os log when we have external memory
If the part has no external memory configured, then there will be no os
log for us to check, and any attempt to access that memory will trigger
hardware errors.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
164d04f4fc Blackfin: BF537: unify duplicated headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
b0c5f1cb72 Blackfin: BF52x: unify duplicated headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
0807fe0a49 Blackfin: drop duplicate system mmr and L1 scratch defines
Common code already takes care of setting up these defines when a port
hasn't specified them, so punt the duplicate values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
cca07417d5 Blackfin: BF50x: new processor port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
5a9a2c55d1 Blackfin: fix bd_t handling
The recent global data changes (making the size autogenerated) broke the
board info handling on Blackfin ports as we were lying and lumping the
bd_t size in with the gd_t size.  So use the new dedicated bd_t size to
setup its own address in memory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
704f1f0c20 Blackfin: bf537: fix L1 data defines
The __BFIN_DEF_ADSP_BF537_proc__ define isn't setup anymore, so use
the one coming from the compiler.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
baaa4f9ce2 Blackfin: serial: clean up muxing a bit
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
fbcf8e8c75 Blackfin: move CONFIG_BFIN_CPU back to board config.h
This is a revert of 821ad16fa9 as Wolfgang doesn't like the new code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
ec4c6933ff Blackfin: unify bootmode based LDR_FLAGS setup
Unify this convention for all Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
fbb21ff047 Blackfin: drop CONFIG_SYS_TEXT_BASE from boards
We don't want/use this value for Blackfin boards, so punt it and have the
common code error out when people try to use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
7d69dfd2a8 Blackfin: skip RAM display for 0 mem systems
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Haiying Wang
6dc1eceb9c Introduce a new linker flag LDFLAGS_FINAL
commit 8aba9dceeb
Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS

breaks the usage of --gc-section to build nand_spl. We still need linker option
--gc-section for every uboot image, not only the main one. LDFLAGS_FINAL passes
the --gc-sections to each uboot image.

To get the proper linker flags, we use LDFLAGS and LDFLAGS_FINAL to replace
PLATFORM_LDFLAGS in the Makefile of each nand_spl board.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2011-03-22 23:32:06 +01:00
Nobuhiro Iwamatsu
8aba9dceeb Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS
Linker needs to use the proper endian/bfd flags even when doing partial linking.
LDFLAGS_u-boot sets linker option which is called it when U-boot is built
(u-boot final).
LDFLAGS sets necessary option by partial linking (use in cmd_link_o_target).

CC: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-01-25 22:22:30 +01:00
John Rigby
2956532625 Move DECLARE_GLOBAL_DATA_PTR to file scope
It can be optimised out by the compiler otherwise resulting
in obscure errors like a board not booting.

This has been documented in README since 2006 when these were
first fixed up for GCC 4.x.

Signed-off-by: John Rigby <john.rigby@linaro.org>

Fix some additional places.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-By: Albert ARIBAUD <albert.aribaud@free.fr>
2010-12-21 11:33:36 +01:00
Mike Frysinger
4024242669 Blackfin: drop initcode.o from combined object
We explicitly link in the initcode.o in the Blackfin linker script, so
there is no need to merge it into the main common object for the linker
to pull in itself.  This also fixes duplicate symbol errors with the new
partial linking logic.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-19 19:17:57 -05:00
Mike Frysinger
49508d4c59 Blackfin: make sure bss len is multiple of 4 bytes
The Blackfin on-chip BootROM requires that fill operations (which is
used for the bss) be aligned to 4 bytes (base addr and total len).
Plus, the Blackfin early init asm code assumes the same thing.  So
rather than making things work for no real gain, make sure the bss
len is padded to 4 bytes in the linker script.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-18 04:38:19 -05:00
Mike Frysinger
cd97dd4f2c Blackfin: stick ins/outs funcs into their own .text section
This lets the linker garbage collect these functions when they aren't
actually used by placing them into the standard .text.<func> section.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-18 04:38:19 -05:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Wolfgang Denk
3388db2cd7 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-10-29 21:46:08 +02:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Mike Frysinger
73520939b4 Blackfin: config.mk: drop manual stripping of config vars
Now that the common code takes care of stripping away quotes and such
from numeric options, we no longer need to do so ourselves.  So drop
the custom code we have in the Blackfin config.mk.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-27 21:18:05 -04:00
Mike Frysinger
1fde3eb2d3 Blackfin: fix building after asm-offsets.h intro
Since some of the defines in our config.h use the generated defines, we
need to include the generated header.  This fixes building of the Blackfin
start.S file (where the stack is setup).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-27 21:10:58 -04:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Mike Frysinger
5641f34f8b Blackfin: workaround anomaly 05000440
We cannot rely on the syscontrol rom func to program PLL_DIV with anomaly
05000440 is in effect, so manually program the MMR when necessary.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-14 20:23:26 -04:00
Mike Frysinger
e5d8984be6 Blackfin: update anomaly lists to latest sheets
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-14 20:23:26 -04:00
Mike Frysinger
d3c07a5d24 Blackfin: fix MMC init output alignment
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:40 -04:00
Mike Frysinger
48c00fe25c Blackfin: propagate target cpu defines when building embedded env
Since we're no longer extracting the env from the target ELF file (since
upstream wouldn't take that change), we're back to the problem of cpu
defines not properly propagating to the env setup stage.  So the embedded
env built by the host compiler doesn't match the one that is linked into
the u-boot env.

Reported-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:40 -04:00
Mike Frysinger
cec11d5014 Blackfin: cmd_gpio: accept upper case pin names
The intention all along was to accept pin names irrelevant of their case.
But I guess I forgot to test/implement support for that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:40 -04:00
Mike Frysinger
73b6f4046b Blackfin: cmd_gpio: return gpio value to caller
Make the GPIO command usable in a scripting environment by returning
the GPIO value rather than always 0.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:39 -04:00
Mike Frysinger
1729615875 Blackfin: cmd_gpio: document/extend input sub-option
The input sub command was missing from the help text, and it didn't show
the actual value currently read on the GPIO.  This allows people to read
the value of input pins.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:39 -04:00
Mike Frysinger
821ad16fa9 Blackfin: move CONFIG_BFIN_CPU to board config.mk
The CONFIG_BFIN_CPU option is largely used in the build system, so move
it out of the board config.h and into the board config.mk.  It'd be nice
to keep everything in the config.h, but the patch to extract that value
early was rejected.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
543ef36586 Blackfin: bf561: merge headers
Only the BF561 port was using the common dual core headers, so merge them
into the BF561 specific headers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
c489762ac2 Blackfin: bf533: merge headers
Only the BF533 port was using the common extended headers, so merge them
into the BF533 specific headers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
9615398dc2 Blackfin: unify core MMRs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
aa79cbbf27 Blackfin: bf52x: unify arch header duplication
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
9d291d816b Blackfin: bf537: unify arch header duplication
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
94e3e444de Blackfin: punt old *p style volatile MMR defines
These are unused now, so punt them to clean things up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
f47a5a83a2 Blackfin: punt headers for non-existent BF541
There is no BF541 processor variant, so punt headers for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:37 -04:00
Mike Frysinger
6f070e1867 Blackfin: bfin_spi: add optional DMA support
This moves the last piece from the old spi_flash driver to the new SPI
framework -- optional DMA RX support.  This typically cuts speeds by ~40%
at the cost of additional ~300 bytes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Mike Frysinger
2c0a6f2d4f Blackfin: add support for BF51x parts
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Mike Frysinger
180e311f28 Blackfin: add support for BF538/BF539 processors
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Wolfgang Denk
2e6e1772c0 Merge branch 'next' of /home/wd/git/u-boot/next
Conflicts:
	include/ppc4xx.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-28 23:30:47 +02:00