Commit graph

326 commits

Author SHA1 Message Date
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Tudor Ambarus
ff352ac853 configs: sama5d27_som1_ek: add qspiflash_defconfig
Add the default config file of QSPI media. The config is based on
sama5d27_som1_ek_mmc_defconfig.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Tudor Ambarus
9ee8e7aec7 configs: sama5d2_xplained: add qspiflash_defconfig
Add the default config file of QSPI media. The config is based on
sama5d2_xplained_mmc_defconfig.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Eugen Hristev
ad371d8cd1 board: atmel: fix pda variable not being reset
In case someone detects a PDA and u-boot sets the 'pda' variable,
and the user does a saveenv, the pda is set in env, and if the
screen is removed, u-boot will still have in the env the 'pda'
variable, even if no screen is attached.
In order to fix this, we have to reset the 'pda' variable,
such that it's not just set if the screen is detected, but also unset
if no screen is detected.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-06-27 09:47:49 +03:00
Eugen Hristev
bc2d313d68 board: atmel: sama5d2_icp: enable green led on SPL completion
Enable the green led on SPL completion.
Red led has no pulldown and it will be lighted by default when the
board starts up.
If the PMIC is not configured to enable LDO2, the leds will not light.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-15 09:34:22 +03:00
Eugen Hristev
2950c514e8 board: atmel: sama5d2_icp: standby disable on CAN transceivers in SPL
The 2 CAN transceivers have a STBDY pin which must be low in order to
operate.
This pin is tied to PB25.
Set it to 0 in bootstrap.
At a later time, this needs to be controlled by Linux power management
system, or requested by some driver as a gpio and tied to 0 during
CAN link up.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-15 09:34:22 +03:00
Eugen Hristev
57fbd36c66 board: atmel: sama5d2_icp: add periph reset in SPL hw init
Some periphs on the board need to be reset by holding their reset GPIO down
for a specific time period.
On a warm reset, the periphs are not being reset by any reset pin and may be
in a wrong state.
Reset them in the SPL to make sure we are booting into the correct state
machine of the specific board periphs (KSZ eth switch, USB hub, HSIC eth,
Ethercat)

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-15 09:34:22 +03:00
Eugen Hristev
f085452d85 board: atmel: add SAMA5D2 ICP board
The SAMA5D2 ICP Board features the SAMA5D27 SoC,
together with QSPI Flash, Wilc3000 wireless device and
EtherCat support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-18 09:43:22 +03:00
Eugen Hristev
61b4dbb0d0 board: at91sam9x5: add environment var for cpu type
When booting and CPU is detected from cpuid, we also need an environment
variable that will be used in boot commands to load the proper devicetree.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22 09:18:49 -04:00
Simon Glass
9949ee876d video: at91: Adjust vidconsole_position_cursor() to use char pos
At present this function uses pixels but it seems more useful for it to
position in terms of characters on the screen. This also matches the
comment to the function. Update this.

Unfortunately there is one user of this function (at91). Have a crack at
fixing this, since I cannot test it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-10-09 04:40:27 -06:00
Eugen Hristev
2f812824c5 MAINTAINERS: at91: update entry for at91 boards
Updated the maintainership for the at91 boards.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-01 10:44:14 -04:00
Tom Rini
2c1e16b9d2 MAINTAINERS: Update some entries for missed boards
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-30 13:00:37 -04:00
Eugen Hristev
95501d5242 board: sama5d4_xplained: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:41 -04:00
Eugen Hristev
cc1bdd23c0 board: sama5d2_ptc_ek: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:40 -04:00
Eugen Hristev
67f551af89 board: sama5d27_som1_ek: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:40 -04:00
Eugen Hristev
59e43c3291 board: sama5d3_xplained: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:40 -04:00
Eugen Hristev
559ff9e875 board: sama5d2_xplained: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:39 -04:00
Eugen Hristev
afaea1f56c board: atmel: add support for pda detection
This adds the support for PDA detection as common code for
Atmel boards.
Using the one wire interface over GPIO , an EEPROM memory is read
and compared to preprogrammed values for PDA screens TM4300, TM7000
and TM7000B.
Once the PDA is detected, an environment variable is set accordingly.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:39 -04:00
Eugen Hristev
528a42a795 board: sama5d27_som1_ek: Fix the USB vbus power
According to the REVB schematic, fix the USB vbus power enable pin.

Based on original work by Wenyou Yang

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-08 09:07:36 -04:00
Eugen Hristev
23dd6015ce board: sama5d2_ptc_ek: adjust the smc timings of nand
To fix the issue of write the rootfs.ubi, adjust the smc timings
configuration of the nand controller.

Based on original work by Wenyou Yang

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-08 09:07:36 -04:00
Ludovic Desroches
8ee54672df gpio: atmel_pio4: give a full configuration when muxing pins
When a pin is muxed to a peripheral or as a GPIO, the only
configuration that can be set is the pullup. It is too restrictive
so this patch allows to give a full configuration.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2018-05-08 09:07:36 -04:00
Ludovic Desroches
9ab66d0d20 board: atmel: sama5d2_ptc_ek: update pin configuration for NAND
The drive strength has to be set to medium for the NAND data lines.
With a low drive, we can get some data corruption.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2018-05-08 09:07:35 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Alex Kiernan
9925f1dbc3 net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

  board/ti/am335x/built-in.o: In function `board_late_init':
  board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
  u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca4 ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Tom Rini
ec75fab302 build: Drop CONFIG_SPL_BUILD guards in some cases
Given gcc-6.1 and later we can now safely have strings discarded when
the functions are unused.  This lets us drop certain cases of not
building something so that we don't have the strings brought in when the
code was discarded.  Simplify the code now by dropping guards we don't
need now.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chander Kashyap <k.chander@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
Cc: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-10 08:05:52 -05:00
Masahiro Yamada
6ae3900a86 mtd: nand: Rename nand.h into rawnand.h
This header was renamed to rawnand.h in Linux.

The following is the corresponding commit in Linux.

  commit d4092d76a4a4e57b65910899948a83cc8646c5a5
  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
  Date:   Fri Aug 4 17:29:10 2017 +0200

      mtd: nand: Rename nand.h into rawnand.h

      We are planning to share more code between different NAND based
      devices (SPI NAND, OneNAND and raw NANDs), but before doing that
      we need to move the existing include/linux/mtd/nand.h file into
      include/linux/mtd/rawnand.h so we can later create a nand.h header
      containing all common structure and function prototypes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:00 +09:00
Ludovic Desroches
aaa4ba930c board: atmel: add sama5d2_ptc_ek board
Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board
which was a prototype.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-11-29 22:30:50 -05:00
Tom Rini
79df00fdb4 MAINTAINERS: Add missing boards and config entries
As part of my usual round of build testing, output about missing
MAINTAINERS information was not logged, and thus often overlooked.
Correct that mistake by ensuring that I log the output of
genboardscfg.py every time.  As part of that, address a number of
missing MAINTAINERS entires.  In the case of a missing file, I have put
the original submitter down.  In the rest of the cases I have added the
config (and sometimes relevant header file) to the existing set of file
globs.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-06 09:58:51 -05:00
Tuomas Tynkkynen
c68c03f52b Drop CONFIG_HAS_DATAFLASH
Last user of this option went away in commit:

fdc7718999 ("board: usb_a9263: Update to support DT and DM")

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16 09:42:51 -04:00
Wenyou Yang
40f3429415 board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29 17:51:56 +02:00
Wenyou Yang
e974b08119 board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29 17:51:22 +02:00
Wenyou Yang
4b0467db53 board: sama5d4ek: Convert to CONFIG_DM_VIDEO
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29 17:50:44 +02:00
Wenyou Yang
fe32c6d159 board: sama5d3xek: Convert to CONFIG_DM_VIDEO
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29 17:50:04 +02:00
Wenyou Yang
d2cd09bb44 board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29 17:48:56 +02:00
Wenyou Yang
5541543f68 configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment
To remove the assignment of CONFIG_SYS_EXTRA_OPTIONS option,
which is deprecated, use the CONFIG_XXXX_BOOT options to
indicate the boot media, and the SoC is selected by the board.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-09-14 16:02:48 -04:00
Wenyou Yang
ce4054bf82 board: atmel: Add SAMA5D27 SOM1 EK board
The SAMA5D27-SiP (System in Package) integrates the SAMA5D2
with 1Gbit DDR2-SDRAM in a single package.

The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and
Mac-address EEPROM.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-14 16:02:46 -04:00
Wenyou Yang
23a19e0358 board: sama5d2_xplained: Make SPL work on spiflash
Because before switching to a lower clock source, we must switch
the clock source first instead of last. So before configuring the
PMC_MCKR register, invoke at91_mck_init_down() first.

As said in datasheet, the the size of SPL must not exceed the maximum
size allowed(64Kbytes).

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-14 16:02:44 -04:00
Wenyou Yang
82e0646af7 atmel: common: Add function to display via DM_VIDEO's API
Add a function to display the company's logo and board information
via the API from DM_VIDEO. This function can be shared by other
atmel boards, so locate it in board/atmel/common folder.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-14 16:02:43 -04:00
Wenyou Yang
fafa440342 board: sama5d4_xplained: Set mac address from eeprom
Add the code to set the ethernet mac address from eeprom by using
the common code from the common folder.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11 16:23:08 -04:00
Wenyou Yang
34e2819d31 board: sama5d2_xplained: Replace code to set mac address
Replace the code to set the ethernet mac address with the code from
the common folder.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11 16:23:07 -04:00
Wenyou Yang
d9b23e26f0 board: atmel: Create board/$(VENDOR)/common folder
Create board/$(VENDOR)/common folder to accommodate the common code
shared by other atmel boards, now put the code to set ethernet mac
address from eeprom, which uses the i2c eeprom driver.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11 16:23:06 -04:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Simon Glass
fd1e959e91 env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()
Rename this function for consistency with env_set().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:23:56 -04:00
Simon Glass
382bee57f1 env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:22:18 -04:00
Wenyou.Yang@microchip.com
f166af88a8 board: at91sam9260ek: Use SPI-flash-based AT45xxx DataFlash
To support driver model and device tree, use the SPI-flash-based
AT45xxx DataFlash driver, DataFlash is a kind of SPI flash.
Instead of ATMEL_DATAFLASH_SPI DataFlash older driver that will
be removed in the future.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-04 20:38:36 -04:00
Wenyou.Yang@microchip.com
56a61e5e27 board: at91sam9rlek: Use SPI-flash-based AT45xxx DataFlash
To support driver model and device tree, use the SPI-flash-based
AT45xxx DataFlash driver, DataFlash is a kind of SPI flash.
Instead of ATMEL_DATAFLASH_SPI DataFlash older driver that will
be removed in the future.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-04 20:38:35 -04:00
Wenyou.Yang@microchip.com
eab36f6d7b board: at91sam9263ek: Use SPI-flash-based AT45xxx DataFlash
To support driver model and device tree, use the SPI-flash-based
AT45xxx DataFlash driver, DataFlash is a kind of SPI flash.
Instead of ATMEL_DATAFLASH_SPI DataFlash older driver that will
be removed in the future.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-04 20:38:35 -04:00
Wenyou.Yang@microchip.com
324873e7c2 board: at91sam9261ek: Update to support DT and DM
Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.

Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-04 20:38:35 -04:00
Grygorii Strashko
31f8d39e2a board: atmel: use get_nand_dev_by_index()
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-07-11 22:41:51 -04:00