Commit graph

17 commits

Author SHA1 Message Date
Michal Simek
f8f41ae668 scsi: dm: Unbind all scsi based block devices before new scan
New scan should unbind all block devices not to be listed again.
Without this patch if scsi reset or scan is called new block devices are
created which point to the same id and lun.

For example:
ZynqMP> scsi scan
scsi_scan: if_type=2, devnum=0: sdhci@ff170000.blk, 6, 0
scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 0
scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 1
scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 2
scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 3
scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 4
scanning bus for devices...
  Device 0: (1:0) Vendor: ATA Prod.: KINGSTON SVP200S Rev: 501A
            Type: Hard Disk
            Capacity: 57241.8 MB = 55.9 GB (117231408 x 512)

Reported-by: Ken Ma <make@marvell.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-01-09 11:25:20 -07:00
Michal Simek
e8a016b537 dm: Add support for scsi/sata based devices
All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block device based on scsi_curr_dev pointer.

intr_scsi() is commented now but it can be replaced by calling
find_scsi_device() and scsi_scan().

scsi_dev_desc[] is commented out but common/scsi.c heavily depends on
it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol
is reassigned to a block description allocated by uclass.
There is only one block description by device now but it doesn't need to
be correct when more devices are present.

scsi_bind() ensures corresponding block device creation.
uclass post_probe (scsi_post_probe()) is doing low level init.

SCSI/SATA DM based drivers requires to have 64bit base address as
the first entry in platform data structure to setup mmio_base.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-20 09:15:27 +01:00
Tom Rini
361a879902 Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"
This reverts commit 3edc0c2522, reversing
changes made to bb135a0180.
2016-12-09 07:56:54 -05:00
Michal Simek
bce4d18c9d dm: Add support for scsi/sata based devices
All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block device based on scsi_curr_dev pointer.

intr_scsi() is commented now but it can be replaced by calling
find_scsi_device() and scsi_scan().

scsi_dev_desc[] is commented out but common/scsi.c heavily depends on
it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol
is reassigned to a block description allocated by uclass.
There is only one block description by device now but it doesn't need to
be correct when more devices are present.

scsi_bind() ensures corresponding block device creation.
uclass post_probe (scsi_post_probe()) is doing low level init.

SCSI/SATA DM based drivers requires to have 64bit base address as
the first entry in platform data structure to setup mmio_base.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Series-changes: 2
- Use CONFIG_DM_SCSI instead of mix of DM_SCSI and DM_SATA
  Ceva sata has never used sata commands that's why keep it in
  SCSI part only.
- Separate scsi_scan() for DM_SCSI and do not change cmd/scsi.c
- Extend platdata

Series-changes: 3
- Fix scsi_scan return path
- Fix header location uclass-internal.h
- Add scsi_max_devs under !DM_SCSI
- Add new header device-internal because of device_probe()
- Redesign block device creation algorithm
- Use device_unbind in error path
- Create block device with id and lun numbers (lun was there in v2)
- Cleanup dev_num initialization in block device description
  with fixing parameters in blk_create_devicef
- Create new Kconfig menu for SATA/SCSI drivers
- Extend description for DM_SCSI
- Fix Kconfig dependencies
- Fix kernel doc format in scsi_platdata
- Fix ahci_init_one - vendor variable

Series-changes: 4
- Fix Kconfig entry
- Remove SPL ifdef around SCSI uclass
- Clean ahci_print_info() ifdef logic
2016-12-08 09:23:48 +01:00
Michal Simek
0b3a58eeee scsi: Separate SCSI private block description initialization
When blk_create_device() is called some parameters in blk_desc are
automatically filled. Separate SCSI private initialization and SCSI full
block device initialization not to rewrite already prepared data.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:27 +01:00
Michal Simek
c002e39ae6 scsi: Change scsi_scan() to be able to return value
With DM_SCSI this function will return more than one return value to
cover errors.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:26 +01:00
Michal Simek
545a284711 scsi: Make private functions static
Several functions should be static because they are not exported to any
other file.
Warnings were reported by sparse C=1.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:26 +01:00
Michal Simek
182ec15307 scsi: Remove completely unused functions
These functions are not called for any location.
This patch removes them scsi_trim_trail(), scsi_get_disk_count()
and scsi_setup_read6().

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:26 +01:00
Michal Simek
cdb93b276b scsi: Simplify scsi_read/scsi_write()
There is no reason to directly point to static allocated array
when we have proper block_dev pointer available via parameter
in !CONFIG_BLK. For CONFIG_BLK this is read directly from uclass
platdata.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:22 +01:00
Michal Simek
bccfd9e967 scsi: Move pccb buffer initalization directly to scsi_detect_dev
pccb is pointer to temporary buffer which is used only for sending
command. Make it local as is done in scsi_read/scsi_write.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:21 +01:00
Michal Simek
4dbee176f8 scsi: Take lun from device block description
Prepare LUN(Logical unit number) directly in block description structure
and reuse it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:21 +01:00
Michal Simek
570712f4bc scsi: Extract device detection algorithm
The patch enables running detection algorithm on block device
description structure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:37:16 +01:00
Michal Simek
92ca476c3a scsi: Extract block device initialization
Extract block device initialization to specific function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 14:36:10 +01:00
Ed Swarthout
69c125fe7b dm: scsi: if_typename should be scsi
Fixes:

=> ext2ls scsi 0:1
** Bad device scsi 0:1 **

for boards which use the scsi legacy driver (such as ls1043ardb).

Signed-off-by: Ed Swarthout <Ed.Swarthout@nxp.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-06 13:39:12 -04:00
Simon Glass
535556b2aa dm: scsi: Add support for driver-model block devices
Add driver-model block-device support to the SCSI implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
edd82ab354 dm: scsi: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
11f610edf0 dm: scsi: Separate the non-command code into its own file
At present the SCSI command code includes both the command-processing code
and the core SCSI functions and data structures.

Separate the latter into its own file, adding functions as needed to avoid
the command code accessing data structures directly. This functions use the
new legacy block functions.

With this commit:
- There is no CONFIG option referenced from the command code
- The concept of a 'current SCSI device' is confined to the command code

This will make it easier to convert this code to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00