Commit graph

1469 commits

Author SHA1 Message Date
Peter Tyser
0f89c54be9 i2c: Update references to individual i2c commands
The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop,
and isdram are no longer available so all references to them have been
updated to the new form of "i2c <cmd>".

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:46 +02:00
Peter Tyser
655b34a78a i2c: Create common default i2c_[set|get]_bus_speed() functions
New default, weak i2c_get_bus_speed() and i2c_set_bus_speed() functions
replace a number of architecture-specific implementations.

Also, providing default functions will allow all boards to enable
CONFIG_I2C_CMD_TREE.  This was previously not possible since the
tree-form of the i2c command provides the ability to display and modify
the i2c bus speed which requires i2c_[set|get]_bus_speed() to be
present.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:45 +02:00
Peter Tyser
f0722ee762 tsi108_i2c: Add i2c_init() stub function
Add the i2c_init() function so that the tsi108_i2c.c driver fits
U-Boot's standard I2C API which is utilized by cmd_i2c.c

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:45 +02:00
Wolfgang Denk
f97db54d7e Merge branch 'master' of git://git.denx.de/u-boot-usb 2009-06-09 22:53:03 +02:00
RONETIX - Ilko Iliev
faa14babd7 at91: fix a USB problem for AT91SAM9261
This patch corrects the missing PLLB initialization in usb_cpu_init()
for AT91SAM9261.
Because of the missing PLLB initialization, the USB support for all
AT91SAM9261 based boards will work only if the PLLB is configured by a
precedent bootloader.

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-06-09 22:25:48 +02:00
Felix Radensky
0c24dec550 ppc4xx/net: Fix MDIO clock setup
This patch fixes MDIO clock setup in case when OPB frequency is 100MHz.
Current code assumes that the value of sysinfo.freqOPB is 100000000
when OPB frequency is 100MHz. In reality it is 100000001. As a result
MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating
the standard. This in not a problem on boards equipped with Marvell PHYs
(e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz,
but can be a problem for other PHYs (e.g. Realtek ones).

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
Yoshihiro Shimoda
d65e34d125 rtl8169: fix PCI system memory address
When PCI device use system memory, some PCI host controller should be
set physical memory address.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
Manikandan Pillai
ca9c8a1e10 SMC911x driver fixed for NFS boot
eth_halt() function in the smc911x drivers used to call the
smc911x_reset() function. eth_halt() used to be called after
tftp transfers. This used to put the ethernet chip in reset
while the linux boots up resulting in the ethernet driver
not coming up. NFS boot used to fail as a result.

This patch calls smc911x_shutdown() instead of smc911x_reset().
Some comments received has also been fixed.

Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
Remy Bohmer
e5a3bc2401 Add config option for disabling DM9000-SROM support.
Some boards do not have SROM support for the DM9000 network adapter.
Instead of listing these board names in the driver code, make this
option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the
same routines

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
Daniel Mack
2c0234fa79 smc911x: write back the manually set MAC address
If the MAX address is given by the environment, write it back to the
hardware.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-07 21:24:16 -07:00
Wolfgang Denk
3bc8556f9b Merge branch 'master' of git://git.denx.de/u-boot-mmc 2009-06-04 10:56:09 +02:00
Wolfgang Denk
dfcd7f2160 Redundant Environment: protect full sector size
Several boards used different ways to specify the size of the
protected area when enabling flash write protection for the sectors
holding the environment variables: some used CONFIG_ENV_SIZE and
CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even
a mix of both for the "normal" and the "redundant" areas.

Normally, this makes no difference at all. However, things are
different when you have to deal with boards that can come with
different types of flash chips, which may have different sector
sizes.

Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the
biggest sector size, which may include several sectors on boards using
the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE
or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the
case that only the first of these sectors get protected, while the
following ones aren't.

This is no real problem, but it can be confusing for the user -
especially on boards that use CONFIG_ENV_SECT_SIZE to protect the
"normal" areas, while using CONFIG_ENV_SIZE_REDUND for the
"redundant" area.

To avoid such inconsistencies, I changed all sucn boards that I found
to consistently use CONFIG_ENV_SECT_SIZE for protection. This should
not cause any functional changes to the code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Paul Ruhland
Cc: Pantelis Antoniou <panto@intracom.gr>
Cc: Stefan Roese <sr@denx.de>
Cc: Gary Jennejohn <garyj@denx.de>
Cc: Dave Ellis <DGE@sixnetio.com>
Acked-by: Stefan Roese <sr@denx.de>
2009-06-04 00:16:16 +02:00
Ilya Yanok
b81830f6e3 mmc: it's safe to ignore mmc_send_if_cond() return value
Return value of mmc_send_if_cond() can be safely ignored (as it is
done in Linux). This makes older cards work with MXC MCI controller.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-06-04 00:15:09 +02:00
Stefan Roese
dba6fcf651 cfi_mtd: Fix bug in last sector detection
This patch now enabled this cfi-mtd wrapper to correctly detect and
erase the last sector in an NOR FLASH device.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-03 23:45:27 +02:00
Yauhen Kharuzhy
4e3d89ba94 mmc: Fix decoding of SCR & function switch data on little-endian machines
SCR & switch data are read from card as big-endian words and should be
converted to CPU byte order.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-06-02 17:20:04 -05:00
Yauhen Kharuzhy
f33cb34b39 mmc: Remove return from mmc_init for non SD 2.0 compatible cards.
Cards which are not compatible with SD 2.0 standard, may return response
for CMD8 command, but it will be invalid in terms of SD 2.0. We should
accept this case as admissible, just like Linux does.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-06-02 17:19:07 -05:00
Rabin Vincent
998be3dd59 mmc: drop unnecessary casts
Now that response is a uint, we can drop all the casts.

Signed-off-by: Rabin Vincent <rabin@rab.in>
2009-06-02 17:18:57 -05:00
Rabin Vincent
0b453ffe28 mmc: fix response decoding on little endian
The mmc code defines the response as an array of chars.  However, it
access the response bytes both as (i) an array of four uints (with
casts) and (ii) as individual chars.  The former case is used more
often, including by the driver when it assigns the response.

The char-wise accesses are broken on little endian systems because they
assume that the bytes in the uints are in big endian byte order.

This patch fixes this by changing the response to be an array of four
uints and replacing the char-wise accesses with equivalent uint-wise
accesses.

Signed-off-by: Rabin Vincent <rabin@rab.in>
2009-06-02 17:18:57 -05:00
Rabin Vincent
9b1f942c09 mmc: use lldiv to fix arm eabi build
The generic MMC core uses direct long long divisions, which do not build
with ARM EABI toolchains.  Use lldiv() instead, which works everywhere.

Signed-off-by: Rabin Vincent <rabin@rab.in>
2009-06-02 17:18:56 -05:00
Rabin Vincent
e85649c7e6 mmc: check find_mmc_device return value
find_mmc_device returns NULL if an invalid device number is specified.
Check for this to avoid dereferencing NULL pointers.

Signed-off-by: Rabin Vincent <rabin@rab.in>
2009-06-02 17:18:56 -05:00
Mike Frysinger
7d6900ebe1 Blackfin: spi: fix pin handling of SPI0 SSEL4
CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a
peripheral in order to work.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-29 17:11:33 -04:00
Stefan Roese
f40f6db278 nand: Fix problem with ECC ordering for PPC4xx NDFC platforms
This patch enables Smart Media (SMC) ECC byte ordering which is used
on the PPC4xx NAND FLASH controller (NDFC). Without this patch we have
incompatible ECC byte ordering to the Linux kernel NDFC driver.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
2009-05-23 12:51:39 +02:00
Detlev Zundel
792a09eb9d Fix e-mail address of Gary Jennejohn.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 22:11:59 +02:00
Wolfgang Denk
bf2ba6d46e Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash 2009-04-30 22:59:45 +02:00
Stefan Roese
f8e2b3107e MTD: Change cfi-mtd to accept non-uniform sector sizes
With this patch non-uniform NOR FLASH chips (chips with multiple erase
regions) can be exported via the cfi-mtd layer and therefor used by UBI.
We select the largest sector size as erasesize. The cfi driver will make
sure that the smaller sectors are handled correctly.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-29 11:06:06 +02:00
Anatolij Gustschin
3dcbe628d6 video: fix bug in cfb_console.c code
Fix bug in drawing long version/info strings:
U-Boot version string like
"U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
is long and doesn't wrap around correctly while drawing
beside the logo. Such long strings partially overwrite
the logo. This patch is an attempt to fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2009-04-28 10:55:13 +02:00
Stefan Roese
dbe29e36a4 mtd: nand/onenand: Register mtd device upon device scanning
With this patch the NAND and OneNAND devices are registered in the MTD
subsystem and can then be referenced by the mtdcore code (e.g.
get_mtd_device_nm()). This is needed for the new "ubi part" command
syntax without the flash type parameter (nor|nand|onenand).

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-28 01:15:38 +02:00
Stefan Roese
10bb62d85a mtd: nand: Include linux/mtd/partitions.h in nand_base.h
This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
defined:

nand_base.c: In function 'nand_release':
nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-28 01:15:37 +02:00
Detlev Zundel
294f10ca9e mips/vcth: Use generic 16550 uart driver
As the common code also handles baudrate switching, which the board
specific vct.c driver did not support, this is one of the rare
occassions where deleting code actually adds a feature :)

Signed-off-by: Detlev Zundel <dzu@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2009-04-28 01:10:24 +02:00
Peter Tyser
f9a109b3ad Replace __attribute references with __attribute__
__attribute__ follows gcc's documented syntax and is generally more
common than __attribute.  This change is only asthetic and should not
affect functionality.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-28 01:01:39 +02:00
David Brownell
ad74cae9ff dm9000 EEPROM reading bugfix
Make the U-Boot dm9000 driver read addresses from EEPROM just
like Linux does ... read six bytes, instead of reading twelve
bytes and then discarding every other one.

Using the right Ethernet address is a big win.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-04-28 00:28:18 +02:00
Yoshihiro Shimoda
d4c02e6f5d rtl8169: fix cache coherency problem
Fix the problem that cannot access actual data when CPU data cache enabled.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-04-28 00:18:10 +02:00
Wolfgang Denk
faa5a0c6fc Merge branch 'master' of git://git.denx.de/u-boot-at91 2009-04-24 13:31:02 +02:00
David Brownell
7732cef2ee CMD_UBI != MTD_PARTITIONS
Fix dependency goofage:  it should certainly be possible to have the
partition support without bringing in UBI commands.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Stefan Roese <sr@denx.de>
2009-04-16 23:03:27 +02:00
Jean-Christophe PLAGNIOL-VILLARD
dc39ae9513 at91sam9/at91cap: improve clock framework
calculate dynamically the clock rate and pllb setting for usb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 21:30:44 +02:00
Wolfgang Denk
f75a729b5c Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-04-07 21:53:07 +02:00
Graf Yang
a343ba87ea Blackfin: nand: flush peripheral before polling it
We need to make sure the data written to the nand flash controller makes
it there before we start polling its status register.  Otherwise, we may
get stale data and return before the controller is actually ready.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Scott Wood <scottwood@freescale.com>
2009-04-06 17:37:37 -04:00
Remy Bohmer
3ccbfb25f4 Support for PXA27X UDC.
This Patch adds Support for PXA27X UDC.
	(Rebased to drivers/usb reorganisation)

Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-04-06 20:40:47 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2731b9a866 drivers/usb: regorganisation
move to linux usb driver organisation

as following

drivers/usb/gadget
drivers/usb/host
drivers/usb/musb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-04-06 20:40:46 +02:00
Todor I Mollov
d04371a116 Blackfin: spi: make cs deassert function deterministic
Blackfin SPI driver was not driving the SPI chip-select high before
putting the chip-select signals into tri-state mode.  This is probably
something that slipped by unnoticed in most designs.  If the signals are
put directly into a tri-state mode, then the board is relying on the
pull-up resistors to pull up the chip-select before the next transaction.
Most of the time this is fine, except when you have two transactions that
follow each other very closely, such as the flash erase and read status
register commands.  In this case I was seeing a 500ns separation between
the transactions.  In my setup, with a 10kOhm pull-up, it would meet
timing spec about half the time and resulted in intermittent errors.  (A
stronger pull up would fix this, but our design is targeted for low power
consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
chip-selects high before putting them into tri-state.  For me, this
resulted in a rise time of 5ns instead of the previous rise time of about
1us, and fully satisfied the timing spec of the chip.

Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-06 03:49:31 -04:00
Wolfgang Denk
c0a14aedc3 Update CHANGELOG, coding style cleanup. 2009-04-05 00:27:57 +02:00
Andreas Huber
c203ef5db0 UBI/cfi-mtd: Fix mtd name for multiple chips
On platforms with multiple NOR chips, currently only the first one
can be selected using the "ubi part" command. This patch fixes this
problem by using different names for the NOR "mtd devices".

It also changes the name of the NOR MTD device from "cfi-mtd" to
"norX" (X indexing the device numer) to better match the mtdparts
defaults.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
2009-04-04 23:25:40 +02:00
Sascha Hauer
f5cf2ef2ad mpc52xx phy: initialize only when needed
Do not initialize phy on startup, instead initialize it
when we actually need it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-04 22:37:39 +02:00
Wolfgang Denk
5f58f8d20f Merge branch 'master' of git://git.denx.de/u-boot-at91 2009-04-04 22:15:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD
4758ebdd53 at91: move dataflash spi driver to drivers/spi
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:22 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2b7178afce at91: move usb driver to drivers/usb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:21 +02:00
Jean-Christophe PLAGNIOL-VILLARD
3524049cd0 at91rm9200: move serial shutdown code to serial drivers
introduce serial_exit for this purpose. Use it only when the rm9200
serial driver is active

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Jean-Christophe PLAGNIOL-VILLARD
beebd851cd at91rm9200: move serial driver to drivers/serial
add CONFIG_AT91RM9200_USART to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Ulf Samuelsson
cb82a53266 Add support for the AT91RM9200EK Board.
The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507

with
	- NOR (cfi driver)
	- DataFlash
	- USB OHCI
	- Net
	- I2C (hard)

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Jean-Christophe PLAGNIOL-VILLARD
843a2654bc at91sam9: add watchdog support
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:19 +02:00
Kumar Gala
e6a6789f41 fsl_law: Fix bug in calculation of LAW sizing
In set_ddr_laws() when we determined how much of the size requested
to be mapped was covered by the the first LAW we needed to recalculate
the size based on what was actually mapped.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-04 10:21:40 -05:00
Kumar Gala
c8514622e2 fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
Rename the pci header for FSL HW so we can move some prototypes
in there and stop doing explicit externs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-04 10:21:29 -05:00
unsik Kim
75eb82ec7c mflash: Initial mflash support
Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
   confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim <donari75@gmail.com>
2009-04-03 23:47:06 +02:00
Wolfgang Denk
8ddfe804c4 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-04-03 22:48:05 +02:00
Wolfgang Denk
ca41ef301b Merge branch 'sf' of git://git.denx.de/u-boot-blackfin 2009-04-03 22:42:44 +02:00
Wolfgang Denk
0d8cb9c04f Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-04-03 22:38:36 +02:00
Detlev Zundel
200779e3e2 Rename common ns16550 constants with UART_ prefix to prevent conflicts
Fix problems introduced in commit
7b5611cdd1 [inka4x0: Add hardware
diagnosis functions for inka4x0] which redefined MSR_RI which is
already used on PowerPC systems.

Also eliminate redundant definitions in ps2mult.h.  More cleanup will
be needed for other redundant occurrences though.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-04-03 22:34:07 +02:00
Scott Wood
99067b08f4 Noisily disable the legacy NAND subsystem.
Legacy NAND is marked for feature removal after April 2009 (i.e. this
upcoming release).  There are still several boards that reference it
(though many do so only for disk-on-chip support which has been silently
disabled for a while now).  These boards will now fail to build
with #error, though the code is still there if the user removes #error.

The plan is to remove the code outright in the next release, along with
any board code that refers to it (such as board/esd/common/auto_update.c).

Also, remove the legacy NAND API description from README.nand.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-03 15:27:26 -05:00
Mike Frysinger
d9596ffbdc sf: stmicro: dont send 4 bytes when reading status register
I can't find anywhere in the datasheet that says the status register needs
3 dummy bytes sent to it before being able to read back the first real
result.  Tests on a Blackfin board show that after writing the opcode, the
status register starts coming back immediately.  So only write out the
read status register opcode before polling the result.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Jason McMullan <mcmullan@netapp.com>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2009-04-02 12:51:28 -04:00
Mike Frysinger
1abe365ffc sf: set common timeouts in seconds, not milliseconds
Since timeouts are only hit when there is a problem in the system, we
don't want to prematurely timeout on a functioning setup.  Thus having
low timeouts (in milliseconds) doesn't gain us anything in the production
case, but rather increases likely hood of causing problems where none
otherwise exist.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 08:11:31 -04:00
Mike Frysinger
2a6ce1115b sf: stmicro: use common page timeout define
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:51:55 -04:00
Mike Frysinger
0dcdbb172c sf: always read 5 bytes for the idcode
Some SPI flash drivers like to have extended id information available
(like the spansion flash), so rather than making it re-issue the ID cmd
to get at the last 2 bytes, have the common code read 5 bytes rather than
just 3.  This also matches the Linux behavior where it always reads 5 id
bytes from all flashes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
CC: Mingkai Hu <Mingkai.hu@freescale.com>
2009-04-02 06:50:21 -04:00
Mike Frysinger
9726ba4aba sf: stmicro: drop redundant id read
The common SPI flash code reads the idcode and passes it down to the SPI
flash driver, so there is no need to read it again ourselves.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
CC: Jason McMullan <mcmullan@netapp.com>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2009-04-02 06:50:17 -04:00
Mike Frysinger
1c5874374e sf: add driver for SST flashes
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:49:58 -04:00
Mike Frysinger
f773a1bbdb sf: drop DEBUG defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:49:49 -04:00
Jean-Christophe PLAGNIOL-VILLARD
6b850a9fa8 mtd: add some at45 spi flash support
- AT45DB321D
 - AT45DB161D
 - AT45DB081D
 - AT45DB041D
 - AT45DB021D
 - AT45DB011D

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:49:38 -04:00
Mingkai Hu
6805e4bf83 mtd: SPI Flash: Support the Spansion Flash
Add MTD SPI Flash support for S25FL008A, S25FL016A,
S25FL032A, S25FL064A, S25FL128P.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:49:30 -04:00
Mike Frysinger
bc72f50a65 Blackfin: add BF538/BF539 SPI portmux handling
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:42:18 -04:00
Mike Frysinger
d3c38d96b9 Blackfin: convert bfin_sdh to legacy mmc
The Blackfin SDH controller is still using the legacy framework, so update
the driver to use the renamed functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:42:05 -04:00
Wolfgang Denk
dfc91c3395 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-04-02 00:24:33 +02:00
Wolfgang Denk
ed9953d690 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2009-04-01 22:47:03 +02:00
Jens Scharsig
d144f94d59 soft_i2c.c compiler/linker error
This patch fix the compiler/linker errors

common/cmd_i2c.c:1252: undefined reference to `i2c_get_bus_speed'
common/cmd_i2c.c:1256: undefined reference to `i2c_set_bus_speed'

if board use CONFIG_I2C_CMD_TREE and CONFIG_I2C_MULTI_BUS is not
uesd/undef (wrong define order)

and

removes additional empty lines

Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
2009-03-31 08:29:50 +02:00
Haiying Wang
22b6dbc169 MPC85xx: Add MPC8569 CPU support
There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
then invalidate it after LBCR bit 13 is set.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-30 13:33:51 -05:00
Haiying Wang
2d4de6ae5b MPC85xx: Load and enable QE microcode patch in IRAM
For the silicon which doesn't have ROM support in QE, it always needs to load
a pre-built ucode binary to IRAM so that QE can work.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
2009-03-30 13:33:50 -05:00
Jean-Christophe PLAGNIOL-VILLARD
b3f66b0ba0 s3c2410: move nand driver to drivers/mtd/nand
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-30 18:58:40 +02:00
Jean-Christophe PLAGNIOL-VILLARD
d3b6357741 s3c24x0: move i2c driver to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-30 18:58:40 +02:00
Jean-Christophe PLAGNIOL-VILLARD
300f99f453 s3c24x0: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-30 18:58:39 +02:00
Jean-Christophe PLAGNIOL-VILLARD
942ba9969b davinci: move i2c driver to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-30 18:58:39 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ee4f3e2765 davinci: move nand driver to drivers/mtd/nand
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-30 18:58:39 +02:00
Jean-Christophe PLAGNIOL-VILLARD
d3e55d0774 imx: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-30 18:58:38 +02:00
Detlev Zundel
04e11cf383 rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Andreas Pfefferle <ap@denx.de>
2009-03-30 09:39:46 +02:00
Detlev Zundel
572e6179ad drivers/twserial: Add protocol driver for "three wire serial" interface.
This pretty unintelligent interface is used on some RTC chips.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-03-30 09:38:36 +02:00
Jean-Christophe PLAGNIOL-VILLARD
a6ef3ddeaf arm720t/clps7111: move serial driver to drivers/serial
add CONFIG_CLPS7111_SERIAL to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:42 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6790c55704 lpc2292: move serial driver to drivers/serial
add CONFIG_LPC2292_SERIAL to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:42 +02:00
Jean-Christophe PLAGNIOL-VILLARD
176a600d0e ks8695: move serial driver to drivers/serial
add CONFIG_KS8695_SERIAL to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:42 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d27bca15d s3c64xx: move usb driver to drivers/usb
add CONFIG_USB_S3C64XX to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:42 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ecfa8dda2f imx31: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:41 +02:00
Jean-Christophe PLAGNIOL-VILLARD
9ea91c9fef netarm: move serial driver to drivers/serial
add CONFIG_NETARM_SERIAL to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:41 +02:00
Jean-Christophe PLAGNIOL-VILLARD
412ab70588 sa1100: move serial driver to drivers/serial
add CONFIG_SA1100_SERIAL to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:41 +02:00
Jean-Christophe PLAGNIOL-VILLARD
40fd626223 s3c44b0: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:41 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5fe1377cc4 s3c44b0: move rtc driver to drivers/rtc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:40 +02:00
Jean-Christophe PLAGNIOL-VILLARD
50f601cca8 s3c44b0: move i2c driver to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:40 +02:00
Ladislav Michl
fd88d91a63 cs8900 compile fix
cs8900.c: In function 'eth_init':
cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type
cs8900.c:165: error: invalid operands to binary <<
cs8900.c:166: error: invalid operands to binary <<
cs8900.c:167: error: invalid operands to binary <<

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 00:12:00 +01:00
Wolfgang Denk
aaa0e0812f Merge branch 'master' of git://git.denx.de/u-boot-at91 2009-03-26 22:27:45 +01:00
Wolfgang Denk
2c5bd16af1 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-03-25 22:43:25 +01:00
Wolfgang Grandegger
33846df28f Add wait flags to support board/chip specific delays
The NAND flash on the TQM8548_BE modules requires a short delay after
running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE
requires a further short delay after writing out a buffer. Normally the
R/B pin should be checked, but it's not connected on the TQM8548_BE.
The corresponding Linux FSL UPM driver uses similar delay points at the
same locations. To manage these extra delays in a more general way, I
introduced the "wait_flags" field allowing the board-specific driver to
specify various types of extra delay.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-03-23 15:53:40 -05:00
Wolfgang Grandegger
06e9f7df05 Add support for TQM-specific chip select logic to FSL-UPM
For the NAND chips on the TQM8548 modules, a special chip-select logic is
used. It uses dedicated address lines to be set via UPM machine address
register (mar). This patch adds such support to the FSL-UPM driver.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-03-23 15:53:39 -05:00
Wolfgang Grandegger
e93c1c169d Add multi chip support to the FSL-UPM driver
This patch adds support for multi-chip NAND devices to the FSL-UPM
driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
called with the argument "chip_nr" to allow testing the proper chip
select line. The NAND support of the MPC8360ERDK is updated as well.
No other boards are currently using the FSL UPM driver.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-03-23 15:53:38 -05:00
Wolfgang Grandegger
672ed2aee9 Enable multi chip support in the NAND layer
This patch adds support for NAND_MAX_CHIPS to the MTD NAND layer.
Multi-chips devices are displayed as shown:

  Device 0: 2x NAND 512MiB 3,3V 8-bit, sector size 128 KiB

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-03-23 15:53:37 -05:00
Sonic Zhang
974473caa7 Blackfin: spi: there is no PORTJ_FER MMR on BF537
Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality),
then there is no PORTJ_FER register for us to worry about.

Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-23 15:14:52 -04:00
Eric Schumann
3a3baf3ee6 Make flash protection work, when the environment is in EEPROM
On the pcm030 the environment is located in the onboard EEPROM. But we want
to handle flash sector protection in a safe manner. So we must read the
unlock environment variable from EEPROM instead from flash.

This patch is required as long the evironment is saved into the EEPROM.

Stefan: Additional change as suggested by Wolfgang, use bigger char array
(instead of 4).

Signed-off-by: Eric Schumann <E.Schumann@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-03-23 09:50:45 +01:00
Nicolas Ferre
df486b1fa3 at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed.

The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board.
It is essentially the same, with a few minor differences.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/product_card.asp?part_id=4337

Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-22 14:48:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD
74c076d6c3 at91sam9/at91cap: move nand drivers to drivers/mtd/nand
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-22 13:22:24 +01:00
Wolfgang Denk
ee1702d75a Merge branch 'next' of ../next 2009-03-21 22:15:49 +01:00
Vivek Kutal
9e78dae2b2 Replaced endpoint numbers with appropriate macros in usbtty.c.
Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-03-21 10:40:24 +01:00
Graeme Russ
ece444b42b Move ali512x.h
Moved ali512x.h from include/asm-i386/ic/ to /include

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
2009-03-20 22:39:13 +01:00
Mike Frysinger
03f3d8d3b3 lan91c96/smc91111/smc911x: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Also, do not bother checking the EEPROM if the env is setup.  This
simplifies the code greatly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wolfgang Dnek <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Rolf Offermanns <rof@sysgo.de>
CC: Erik Stahlman <erik@vt.edu>
CC: Daris A Nevil <dnevil@snmc.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-20 22:39:11 +01:00
Mike Frysinger
c527ce9251 sh_eth: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The sh_eth driver can also be simplified a bit by using enetaddr member of
the eth_device structure.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Carlos Munoz <carlos@kenati.com>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:11 +01:00
Mike Frysinger
0a5238cea9 cs8900: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The cs8900 driver also changes slightly in that the hardware is not
consulted if the mac address in the env is sane.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Marius Groeger <mgroeger@sysgo.de>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:11 +01:00
Mike Frysinger
c4b8762f11 bcm570x: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

Since the address is in the PLM_DEVICE_BLOCK structure already, there is
no need to pass the NodeAddress as a second parameter.  So drop the second
argument to the LM_SetMacAddress() function (and update the tigon3 driver
accordingly).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:10 +01:00
Mike Frysinger
d3f871482f drivers/net/: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The drivers that get converted here:
	3c589
	4xx_enet
	dc2114x
	dm9000x
	enc28j60
	fsl_mcdmafec
	ks8695eth
	mcffec
	rtl8019
	rtl8169
	s3c4510b_eth
	xilinx_emac
	xilinx_emaclite

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Rolf Offermanns <rof@sysgo.de>
CC: Stefan Roese <sr@denx.de>
CC: Sascha Hauer <saschahauer@web.de>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
CC: Greg Ungerer <greg.ungerer@opengear.com>
CC: Xue Ligong <lgxue@hotmail.com>
CC: Masami Komiya <mkomiya@sonare.it>
CC: Curt Brune <curt@cucy.com>
CC: Michal SIMEK <monstr@monstr.eu>
2009-03-20 22:39:10 +01:00
Mike Frysinger
500b6c51e4 Blackfin: bfin_mac: force boards to setup the MAC themselves
Since the on-chip MAC does not have an eeprom or similar interface, force
all Blackfin boards that use this driver to setup the board data with a
proper MAC.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:09 +01:00
Nobuhiro Iwamatsu
40281a9ca2 net: sh_eth: Remove sh_eth_reset() from halt function
sh_eth_reset is function to reset Ether IP.
The MAC address is stored in IP, but it is initialized by this function.
OS (e.g. Linux Kernel) can not use this device when initialized.
This revises this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2009-03-20 22:16:36 +01:00
Richard Retanubun
7a88601a34 CFI: geometry reversal for STMicro M29W320DT
Follow up to the flash_fixup_stm to fix geometry reversal
on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-03-19 15:00:32 +01:00
Heiko Schocher
1b6275dfb1 8xx: add support for new keymile kmsupx4 board.
This patch adds support for the kmsupx4 board from Keymile,
based on a Freescale MPC852T CPU

- serial console on SMC1
- 32 MB SDRAM
- 32 MB NOR Flash
- Ethernet over SCC3
- I2C Bitbang

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-03-18 20:50:05 +01:00
Wolfgang Denk
e05825324a Merge branch 'master' of git://git.denx.de/u-boot-sh 2009-03-15 22:15:13 +01:00
Jon Smirl
f949bd8d08 MPC5200 FEC MII speed register
Set a non-zero speed in the MII register so that MII commands will work.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
2009-03-13 09:58:37 -06:00
Yoshihiro Shimoda
06b18163b5 sh: Add some register value configurable to PCI of SH7780
Some register value was hardcoded for System memory size 128MB and
memory offset 0x08000000. This patch fixed the problem.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-03-12 23:58:30 +09:00
Yoshihiro Shimoda
06e2735eb8 sh: Add system memory registration to PCI for SH4
It is necessary for some pci device driver.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-03-12 23:58:30 +09:00
Paul Gortmaker
0452352df1 tsec: report when there is no vendor specific PHY support
Commit af1c2b84 added a generic phy support, with an ID of zero
and a 32 bit mask; meaning that it will match on any PHY ID.

The problem is that there is a test that checked if a matching
PHY was found, and if not, it printed the non-matching ID.
But since there will always be a match (on the generic PHY,
worst case), this test will never trip.

In the case of a misconfigured PHY address, or of a PHY that
isn't explicitly supported outside of the generic support,
you will never see the ID of 0xffffffff, or the ID of the
real (but unsupported) chip.  It will silently fall through
onto the generic support.

This change makes that test useful again, and ensures that
the selection of generic PHY support doesn't happen without
some sort of notice.  It also makes it explicitly clear that
the generic PHY must be last in the PHY table.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-03-09 18:08:04 -05:00
Wolfgang Denk
014c595f12 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Conflicts:
	lib_ppc/board.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-03-09 00:41:48 +01:00
Heiko Schocher
c1bce4fff7 83xx, i2c: add mux support for fsl_i2c
This patch adds I2C mux support for the fsl_i2c driver. This
allows you to add "new" i2c busses, which are reached over
i2c muxes. For more infos, please look in the README and
search for CONFIG_I2C_MUX.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-03-05 18:21:17 -06:00
Mike Frysinger
75ba6d693b smc911x: split out useful defines/functions into local header
The smc911x driver has a lot of useful defines/functions which can be used
by pieces of code (such as example eeprom programmers).  Rather than
forcing each place to duplicate these defines/functions, split them out
of the smdc911x driver into a local header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Guennadi Liakhovetski <lg@denx.de>
CC: Magnus Lilja <lilja.magnus@gmail.com>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-02-25 09:00:32 +01:00
Wolfgang Denk
7fe2a98394 Merge branch 'master' of git://git.denx.de/u-boot-video 2009-02-24 22:56:00 +01:00
Wolfgang Denk
89e372cd3d Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-02-24 22:52:16 +01:00
Guennadi Liakhovetski
0c99f6ab31 video: add an i.MX31 framebuffer driver
Add a driver for the Synchronous Display Controller and the Display
Interface on i.MX31, using IPU for DMA channel setup. So far only
displaying of bitmaps is supported, no text output.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
2009-02-24 10:22:59 +01:00
Guennadi Liakhovetski
689551c5ff A driver for the S6E63D6 SPI display controller from Samsung
This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
It only provides access to controller's registers so the client can freely
configure it.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
2009-02-24 10:00:28 +01:00
Guennadi Liakhovetski
fc7a93c84f i.MX31: support GPIO as a chip-select in the mxc_spi driver
Some SPI devices have special requirements on chip-select handling.
With this patch we can use a GPIO as a chip-select and strictly follow
the SPI_XFER_BEGIN and SPI_XFER_END flags.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-24 09:48:33 +01:00
Guennadi Liakhovetski
b30de3cccf i.MX31: add a simple gpio driver
This is a minimal driver, so far only managing output. It will
be used by the mxc_spi.c driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-24 09:43:10 +01:00
Guennadi Liakhovetski
f9b6a1575d i.MX31: fix SPI driver for shorter than 32 bit
Fix setting the SPI Control register, 8 and 16-bit transfers
and a wrong pointer in the free routine in the mxc_spi driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-24 09:39:44 +01:00
Anton Vorontsov
cc2a8c7751 PCI: Add pci_last_busno() helper
This is just a handy routine that reports last PCI busno: we walk
down all the hoses and return last hose's last_busno.

Will be used by PCI/PCIe initialization code.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-02-23 15:51:10 -06:00
Pieter Henning
736323a490 Added Vitesse VSC8211 definitions to TSEC driver
Added the struct containing PHY settings for the Vitesse VSC8211 phy to
the phy_info list in tsec.c

Signed-off-by: Pieter Henning <phenning@vastech.co.za>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-02-22 23:49:33 -08:00
Wolfgang Denk
9d34d0a0c1 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-02-22 22:51:25 +01:00
Dirk Behme
aba45c85b2 OMAP3: Clean up MMC code
Clean up OMAP3 MMC code:

* Convert register access to struct & readx/writex style
* Replace hardcode values by macros
* Remove macro defined twice

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-02-22 18:29:10 +01:00
Jean-Christophe PLAGNIOL-VILLARD
0176c03a24 nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-22 17:56:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
4f5728987f arm: add uart dcc support
Serial driver via the EmbeddedICE macrocell's DCC channel using
co-processor 14.

It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-22 15:49:28 +01:00
Alessandro Rubini
0d8c6eab24 Nand driver for Nomadik SoC
This driver implements the ECC algorithm described in
the CPU data sheet and uses the OOB layout chosen in
already-released development systems (shipped with a custom-made
u-boot 1.3.1).

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
2009-02-22 13:40:28 +01:00
Yoshihiro Shimoda
60ece6d804 r8a66597-hcd: fix cannot use external hub
Fix the problem that cannot use external hub, because this driver
did not control correctly a DEVADDx register.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-02-22 10:57:42 +01:00
Wolfgang Denk
09fee8e867 Coding Style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-02-22 01:19:52 +01:00
Matthias Fuchs
670cbde8da fpga: Fix Spartan III FPGA booting
This patch does some minor fixing of the Xilinx Spartan III
FPGA boot code:

- Fixed call order of post configuration callback and
  success message printing (result of copy-paste?)
- remove obsolete comment
- minor coding style cleanup

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2009-02-21 22:52:44 +01:00
Matthias Fuchs
3818b67764 fpga: Fix Spartan II FPGA booting
This patch does some minor fixing of the Xilinx Spartan II
FPGA boot code:

- Fixed call order of post configuration callback and
  success message printing (result of copy-paste?)
- relocate post configuration callback only when it
  is implemented
- remove obsolete comment
- minor coding style cleanup

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2009-02-21 22:52:43 +01:00
Mike Frysinger
b4746d8bf9 drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-21 22:49:53 +01:00
Tom Rix
e3ba7f137c ARM:PXA Use new definitions in mmc.h
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-20 03:47:50 +01:00
Andy Fleming
682beeac34 Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions
These names are being taken over by the new MMC framework.  Hopefuly
the PXA can be easily ported, and these functions will go away entirely.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-20 03:47:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
b03d92e558 pxa: move mmc drivers to drivers/mmc
introduce new macro CONFIG_PXA_MMC to activate it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-20 03:47:50 +01:00
Tom Rix
e5e88c3614 ARM:OMAP3 Change mmc_init to mmc_legacy_init
omap3_mmc.c was changed to define mmc_legacy_init.
Remove unused functions.

Compile tested on all arm
Runtime tested on Zoom1.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-02-19 23:50:33 +01:00
Wolfgang Denk
9eb468da3f Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-02-19 00:46:32 +01:00
Kim Phillips
369d0aa967 sata_sil3114: fix compiler warning
judging from other printfs in the same file, it seems ata should be
postpended with the interface number, not the address of the global
port variable.  Fixes this for current u-boot-mpc83xx tree:

Configuring for MPC8349ITX board...
sata_sil3114.c: In function 'sata_bus_softreset':
sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-02-19 00:37:18 +01:00
Ron Madrid
f5675aa5ce Create configuration option for restricted ns16550 functions
This patch will create a configuration option for a minimum configuration for
the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
configuration option to the SIMPC8313.h config file in order to fix the NAND
bootstrap build error.  This option will exclude all functions with exception of
NS16550_putc and NS16550_init.  This will be used primarily to save space and
remove unused code from builds in which space is limited.

Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
2009-02-19 00:34:51 +01:00
Mike Frysinger
daaf74f176 mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile
Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
into the Makefile so we avoid pointless compiling of the file.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-18 00:51:21 +01:00