Commit graph

28 commits

Author SHA1 Message Date
Fabio Estevam
31188d873e mx25pdk: Use the default CONFIG_SYS_PBSIZE
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-03-13 13:13:48 +01:00
Fabio Estevam
4f797c4c1c mx25pdk: Add generic board support
Let's enable CONFIG_SYS_GENERIC_BOARD in order to get rid of warnings related
to generic board support is not in place.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-09-22 16:15:04 +02:00
Fabio Estevam
3098ef429c mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
We should pass the MMC1 base address into CONFIG_SYS_FSL_ESDHC_ADDR.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-09-22 16:14:14 +02:00
Simon Glass
913702ca39 power: Rename CONFIG_PMIC_... to CONFIG_POWER_...
Commit be3b51aa did this mostly, but several have been added since. Do the
job again.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-28 10:58:18 +09:00
Fabio Estevam
81a1d6173c mx25pdk: Align the environment with other FSL boards
Allow the boot of a device tree mainline kernel by aligning the environment
variables with other FSL boards.

Tested NFS boot of a dt 3.14-rc5 kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-03-12 11:19:23 +01:00
Fabio Estevam
0159995841 configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
According to the README:

"- CONFIG_SYS_SPD_BUS_NUM
		If SPD EEPROM is on an I2C bus other than the first
		one, specify here. Note that the value must resolve
		to something your driver can deal with."

There is no SPD EEPROM on the imx boards, so ged rid of this option.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-12-17 18:38:42 +01:00
Fabio Estevam
85164e0c54 configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
There is no real benefit in adding the board name into U-boot's prompt, so
remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> "
prompt is used across FSL boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-11-13 10:09:09 +01:00
Rob Herring
3dae5b510e ARM: mx25: convert to common timer code
Convert mx25 to use the commmon timer code.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-11-04 11:09:34 -05:00
Rob Herring
f232950f82 config: remove platform CONFIG_SYS_HZ definition part 2/2
Remove platform CONFIG_SYS_HZ definition for configs a-z*.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-11-04 11:06:16 -05:00
trem
b089d039b1 i2c: update config using mxc driver to new subsystem
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
2013-10-17 07:20:25 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Benoît Thébaudeau
d37b33481d mx25pdk: Enable imxdi RTC
The mx25pdk board supports the i.MX25 DryIce RTC (imxdi), so enable it. This
allows to compile-test the imxdi driver in the mainline tree.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-03 11:26:12 +02:00
Fabio Estevam
b874df74af mx25pdk: Allow booting a device tree kernel
Select CONFIG_OF_LIBFDT so that a device tree kernel can be launched.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-12-13 09:23:59 +01:00
Fabio Estevam
cabe240b59 mx25pdk: Adapt it for the new PMIC framework
Make the necessary adaptions for the new PMIC framework, so that mx25pdk can
be built again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-12-11 17:41:19 +01:00
Fabio Estevam
d941e6b63e mx25pdk: Configure CONFIG_BOOTDELAY to one second
One second is enough time for users to react in case they want to stop the
booting process.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-11-19 08:49:02 +01:00
Fabio Estevam
2dc0fe9eac mx25pdk: Allow booting a zImage kernel
Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:08 +02:00
Fabio Estevam
e00c89df06 mx25pdk: Add Ethernet support
mx25pdk has a Ethernet port that is connected to its internal FEC controller.

In order to power up the Ethernet PHY (DP83640) it is necessary to communicate
with the MC34704 PMIC via I2C.

Make the FEC ethernet port functional

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:08 +02:00
Fabio Estevam
af2a4093cb mx25pdk: Add esdhc support
mx25pdk has a SD/MMC slot connected to esdhc1.

Add support for it and allow the environment variables to be saved into SD/MMC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:07 +02:00
Fabio Estevam
d6d94e7360 mx25pdk: Include CONFIG_MX25
It is necessary to include CONFIG_MX25 as several i.mx drivers handle the SoC
differences based on the this config option.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:07 +02:00
Fabio Estevam
0208a53fb2 mx25pdk: Use internal RAM for stack pointer
Use internal RAM for stack pointer as it is done in other i.MX boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-20 17:04:28 +02:00
Benoît Thébaudeau
1b2080f338 mx25: Define default SoC input clock frequencies
Define default SoC input clock frequencies for i.MX25 in order to get rid of
duplicated definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Matthias Weisser <weisserm@arcor.de>
2012-09-06 11:05:09 +02:00
Rob Herring
3d6ba91e79 ARM: Remove unused stack and irq config defines
CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present
in most ARM board config files.

IRQs are only enabled for 1 config, so remove the unused config options
for IRQ and FIQ stack size as well.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-01 14:58:22 +02:00
Tom Rini
26750c8aee CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file.  This is used when a board has not set its
own table.

Signed-off-by: Tom Rini <trini@ti.com>
2012-06-20 20:26:16 +02:00
Tom Rini
1005ccfda4 include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
This define does not control anything, remove it.

Signed-off-by: Tom Rini <trini@ti.com>
2012-05-15 08:31:28 +02:00
Stefano Babic
40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-12-06 23:59:40 +01:00
Mike Frysinger
31a4f1e5b6 board configs: drop NET_MULTI references
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:16 +02:00
Fabio Estevam
f39c008e92 mx25pdk: Place machine ID into board config
Let common code set the machine ID.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-30 22:01:03 +02:00
Fabio Estevam
419adbfbcb MX25: Add initial support for MX25PDK
Add the initial support for MX25PDK booting from SD card via internal boot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-30 22:01:00 +02:00