Commit graph

11312 commits

Author SHA1 Message Date
Miquel Raynal
d677bfe2f7 tpm: disociate TPMv1.x specific and generic code
There are no changes in this commit but a new organization of the code
as follow.

* cmd/ directory:
        > move existing code from cmd/tpm.c in cmd/tpm-common.c
	> move specific code in cmd/tpm-v1.c
	> create a specific header file with generic definitions for
	  commands only called cmd/tpm-user-utils.h

* lib/ directory:
        > move existing code from lib/tpm.c in lib/tpm-common.c
	> move specific code in lib/tpm-v1.c
	> create a specific header file with generic definitions for
	  the library itself called lib/tpm-utils.h

* include/ directory:
        > move existing code from include/tpm.h in include/tpm-common.h
	> move specific code in include/tpm-v1.h

Code designated as 'common' is compiled if TPM are used. Code designated
as 'specific' is compiled only if the right specification has been
selected.

All files include tpm-common.h.
Files in cmd/ include tpm-user-utils.h.
Files in lib/ include tpm-utils.h.
Depending on the specification, files may include either (not both)
tpm-v1.h or tpm-v2.h.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix a few more cases of tpm.h -> tpm-v1.h, some Kconfig logic]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-25 20:12:55 -04:00
Ladislav Michl
9b0888ced4 twister: Let SPL load U-Boot from MMC
MMC is not initialized in SPL, so it cannot load u-boot.img
preventing boot from MMC.

Also driver specific functions are guarded with generic
configuration options which leads to build failures when device
driver is not enabled in config. Fix that by using driver
specific defines.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Stefano Babic <sbabic@denx.de>
2018-05-23 22:06:40 -04:00
Tom Rini
bea1649cd9 Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-05-20 09:44:38 -04:00
Tom Rini
56932e84ea Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-05-20 09:44:13 -04:00
Marek Vasut
e9c891ff93 ARM: rmobile: Update V2H Blanche
The V2H Blanche port was broken since some time. This patch updates
the V2H Blanche port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20 12:06:55 +02:00
Tom Rini
855ff8e6dd Fixup various SPDX tags from the latest merge
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18 17:56:50 -04:00
Michal Simek
b4af64fdfd arm64: zynqmp: Use DWC3 generic driver and DM_USB
Remove harcoded XHCI lists and detect mode, speed based on DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Serial-changes: 2
- Remove also XHCI macros from hardware.h
- Remove additional new line in zcu106
2018-05-18 13:23:15 +02:00
Lukasz Majewski
ee94365557 arm: imx53: Add support for imx53 boards from K+P
This commit adds support for DDC and HSC boards from
K+P in u-boot.

Console output:

U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200)

CPU:   Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: WDOG
Model: K+P iMX53
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Module EEPROM:
  ID: TQMa53-CB.0401
  SN: 63152762
  MAC: 00:0b:64:03:14:2a
BBoard:40x0 Rev:10
Net:   eth0: ethernet@63fec000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-18 08:29:38 +02:00
Jagan Teki
9e759ce904 configs: imx6dl-mamoj: Add Falcon mode support
Add Falcon mode support to boot Linux directly after SPL.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Jagan Teki
129ceda202 configs: imx6dl-mamoj: Add DFU support
Add DFU support for BTicino Mamoj board and update
the same steps in README.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18 08:23:43 +02:00
Jagan Teki
1494cc89cb i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Add initial support for i.MX6DL BTicino Mamoj board.

Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Jagan Teki
9faa43c4b5 ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl
u-boot,dm-spl property is specific to U-Boot, so move it into
*u-boot.dtsi files for relevant i.MX6UL files.

This make syncing Linux dts files straight forward.

Also update the MAINTAINERS file for dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Jagan Teki
2175637843 ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl
u-boot,dm-spl property is specific to U-Boot, so move it into
*u-boot.dtsi files for relevant i.MX6QDL files.

This make syncing Linux dts files straight forward.

Also update the MAINTAINERS file for dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Ian Ray
51a42bea52 board: ge: bx50v3: remove redundant targets
This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3.
The boards are identified automatically at runtime.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:58:48 +02:00
Ian Ray
06a3e4389c board: ge: bx50v3: configure video arguments using VPD
Configure video arguments at run-time instead of at compile-time.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Ian Ray
7927ff7a3a board: ge: bx50v3: use VPD instead of compile-time checks
B{46}50v3s have an internal LCD that needs to be configured,
in comparison with B850v3 which has only external displays.

Use VPD instead of `CONFIG_TARGET_GE_B{4,6,8}50V3' compile-time
checks to correct initialize video based on the monitor type.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Nandor Han
5e604e2ce7 board: ge: bx50v3: detect the monitor type by reading VPD earlier
Move the VPD reading earlier in order to establish the monitor
type as soon as possible.

The configuration of the specific environment variables needs to be
done later after the environment is configured.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Ian Ray
70168a7366 board: ge: bx50v3: fix display support for b{46}50v3
Enable Video PLL to fix non-working display support for Bx50v3
internal displays.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Nandor Han
5ce9a1c84f board: ge: bx50v3: unify two switch statements
Simplify process_vpd() by unifying the switch statements handling
product specific configurations.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Ian Ray
63f0ec57f2 board: ge: bx50v3: rename detect_baseboard function
The detect_baseboard() function actually determines whether there is an
internal LCD panel or not.  Rename for clarity.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Chris Packham
e6f61622d3 ARM: mvebu: a38x: restore support for setting timing
This restores support for configuring the timing mode based on the
ddr_topology. This was originally implemented in commit 90bcc3d38d
("driver/ddr: Add support for setting timing in hws_topology_map") but
was removed as part of the upstream sync.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:01:56 +02:00
Chris Packham
2b4ffbf6b4 ARM: mvebu: a38x: sync ddr training code with upstream
This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch
of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git.

The upstream code is incorporated omitting the ddr4 and apn806 and
folding the nested a38x directory up one level. After that a
semi-automated step is used to drop unused features with unifdef

  find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \
    xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \
		-UCONFIG_APN806 -UCONFIG_MC_STATIC \
		-UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
		-UCONFIG_64BIT

INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE.

Some now empty files are removed and the ternary license is replaced
with a SPDX GPL-2.0+ identifier.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:01:56 +02:00
Marek Behún
80af1a9ef6 arm64: mvebu: Add basic support for the Turris Mox board
This adds basic support for the Turris Mox board from CZ.NIC, which is
currently being crowdfunded on Indiegogo.

Turris Mox is as modular router based on the Armada 3720 SOC (same as
EspressoBin).

The basic module can be extended by different modules. The device tree
binary for the kernel can be dependent on which modules are connected,
and in what order. Because of this, the board specific code creates
in U-Boot a variable called module_topology, which carries this
information.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:00:15 +02:00
Tom Rini
9a66328a37 Merge git://git.denx.de/u-boot-tegra 2018-05-11 15:22:36 -04:00
Tom Rini
57a72d0560 SPDX: Correct SPDX tags from recent xilinx merge
Correct the SPDX tag format.

Fixes: 3b52847a45 ("Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze")
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-11 14:54:57 -04:00
Tom Rini
3b52847a45 Xilinx changes for v2018.07
microblaze:
 - Align defconfig
 
 zynq:
 - Rework fpga initialization and cpuinfo handling
 
 zynqmp:
 - Add ZynqMP R5 support
 - Wire and enable watchdog on zcu100-revC
 - Setup MMU map for DDR at run time
 - Show board info based on DT and cleanup IDENT_STRING
 
 zynqmp tools:
 - Add read partition support
 - Add initial support for Xilinx bif format for boot.bin generation
 
 mmc:
 - Fix get_timer usage on 64bit cpus
 - Add support for SD3.0 UHS mode
 
 nand-zynq:
 - Add support for 16bit buswidth
 - Use address cycles from onfi params
 
 scsi:
 - convert ceva sata to UCLASS_AHCI
 
 timer:
 - Add Cadence TTC for ZynqMP r5
 
 watchdog:
 - Minor cadence driver cleanup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlr1ldMACgkQykllyylKDCHioACghoJw6+NqsZXl8zGWRP38yZ5K
 mvgAnihfOQq125mpKPZmcc5yt6wVwYIU
 =8ji9
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07

microblaze:
- Align defconfig

zynq:
- Rework fpga initialization and cpuinfo handling

zynqmp:
- Add ZynqMP R5 support
- Wire and enable watchdog on zcu100-revC
- Setup MMU map for DDR at run time
- Show board info based on DT and cleanup IDENT_STRING

zynqmp tools:
- Add read partition support
- Add initial support for Xilinx bif format for boot.bin generation

mmc:
- Fix get_timer usage on 64bit cpus
- Add support for SD3.0 UHS mode

nand-zynq:
- Add support for 16bit buswidth
- Use address cycles from onfi params

scsi:
- convert ceva sata to UCLASS_AHCI

timer:
- Add Cadence TTC for ZynqMP r5

watchdog:
- Minor cadence driver cleanup
2018-05-11 11:45:28 -04:00
Tom Rini
c590e62d3b Merge git://git.denx.de/u-boot-fsl-qoriq 2018-05-11 07:09:21 -04:00
Siva Durga Prasad Paladugu
d1f4e39d58 mmc: zynq_sdhci: Add support for SD3.0
This patch adds support of SD3.0 for ZynqMP.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 11:13:51 +02:00
Michal Simek
1d6c54ecb3 arm: zynqmp: Add ZynqMP minimal R5 support
Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot.
This patch is adding minimal support to get U-Boot boot.
U-Boot on R5 runs out of DDR with default configuration that's why
DDR needs to be partitioned if there is something else running on arm64.
Console is done via Cadence uart driver and the first Cadence Triple
Timer Counter is used for time.

This configuration with uart1 was tested on zcu100-revC.

U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200)

Model: Xilinx ZynqMP R5
DRAM:  512 MiB
WARNING: Caches not enabled
MMC:
In:    serial@ff010000
Out:   serial@ff010000
Err:   serial@ff010000
Net:   Net Initialization Skipped
No ethernet found.
ZynqMP r5>

There are two ways how to run this on ZynqMP.
1. Run from ZynqMP arm64
tftpb 20000000 u-boot-r5.elf
setenv autostart no && bootelf -p 20000000
cpu 4 disable && cpu 4 release 10000000 lockstep
or
cpu 4 disable && cpu 4 release 10000000 split

2. Load via jtag when directly to R5

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:38:23 +02:00
Michal Simek
0478b0b9b6 arm64: zynqmp: Simplify boot_target variable composition
Call calloc for space allocation only at one location and include if/else
to sprintf. This will simplify run time device adding based on id aliases.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-05-11 09:23:43 +02:00
Nitin Jain
0678941ae5 arm64: zynqmp: Setup MMU map for DDR at run time
This patch fills the MMU map for DDR at run time based on information read
from Device Tree or automatically detected from static configuration.

The patch is needed because for systems which has for example 1GB of memory
but MMU map is 2GB there could be spurious accesses which was seen in past
when mapping is not fitting with actual memory installed.

Signed-off-by: Nitin Jain <nitin.jain@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
4490e013ee arm64: zynqmp: Wire watchdog internals
Enable watchdog in full U-Boot.

Similar changes were done by:
"arm: zynq: Wire watchdog internals"
(sha1: e6cc3b25d7)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
e00656b2a9 arm64: zynqmp: Reset FPD Watchdog on zcu100
Low level configuration didn't reset FPD Watchdog that's why accessing
it caused u-boot hang.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Siva Durga Prasad Paladugu
04ab29ab25 arm64: zynqmp: Add new defconfig for zc1275 revB
This patch enables support zc1275 revB board. It has
SD added compared to revA. The same configuration will
work for RevC boards aswell.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
0b4b82ad14 arm: zynq: Remove checkboard and enable DISPLAY_CPUINFO
Now that showing silicon version is part of the CPU
info display, let's remove checkboard().

Note that the generic show_board_info() will still
show the DT 'model' property. For instance:

U-Boot 2018.05-rc2-00025-g611b3ee0159b (Apr 19 2018 - 11:23:12 +0200)

CPU:   Zynq 7z045
Silicon: v1.0
Model: Zynq ZC706 Development Board
I2C:   ready

Based on patches from Ariel D'Alessandro <ariel@vanguardiasur.com.ar>,
and Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

mini configuration doesn't need to show this information.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
4aba5fb857 arm: zynq: Rework FPGA initialization
This commit moves the FPGA descriptor definition
to mach-zynq, where it makes more sense.

Based on patches from Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
and Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Tom Rini
f739fcd831 SPDX: Convert a few files that were missed before
As part of the main conversion a few files were missed.  These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict.  This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56f ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10 20:38:35 -04:00
Fabio Estevam
53deb24dda board/freescale: Remove invalid fsl email addresses
These fsl email addresses are no longer valid and they do not have a
correspondent nxp.com entry.

Remove all invalid fsl email addresses and mark the boards as orphan.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-10 20:38:33 -04:00
Fabio Estevam
ba74491e24 p1022ds: Change Timur's email address
timur@freescale.com is not a valid email for quite some time, so change
it to Timur's updated email.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Timur Tabi <timur@tabi.org>
2018-05-10 20:38:33 -04:00
Lukasz Majewski
2dbd5cd966 bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking
This patch is necessary for providing basic bootcount checking in the case
of using "falcon" boot mode in that board.

It forces u-boot proper boot, when we exceed the number of errors.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-05-10 20:38:32 -04:00
Marcel Ziswiler
71cb3d7c78 apalis_t30: fix optional pcie port reset for reliable pcie operation
Allow optionally bringing up the Apalis type specific 4 lane PCIe port
as well as the PCIe switch as found on the Apalis Evaluation board. In
order to avoid violating the PCIe reset timing do this by overriding the
tegra_pcie_board_port_reset() function. Note however that both the
Apalis type specific 4 lane PCIe port as well as the regular Apalis PCIe
port are also left disabled in the device tree by default.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:30 -07:00
Marcel Ziswiler
b4f9010428 apalis_t30: fix pcie port 0 and 1 pin muxing
Fix optional Apalis type specific 4 lane PCIe port 0 and Apalis PCIe
port 1 pin muxing.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:30 -07:00
Marcel Ziswiler
f1333417e8 apalis-tk1: fix pcie reset for reliable gigabit ethernet operation
It turns out that the current PCIe reset implementation in the PCIe
board init function is not quite working reliably due to PCIe reset
timing violations. Fix this by overriding the
tegra_pcie_board_port_reset() function.

Also allow optionally bringing up the PCIe switch as found on the Apalis
Evaluation board. Note however that the Apalis PCIe port is also left
disabled in the device tree by default.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:21 -07:00
Tom Rini
e8f80a5a58 Merge git://git.denx.de/u-boot-sunxi 2018-05-09 12:58:06 -04:00
Ashish Kumar
7d3a532d5d armv8: ls1088: Update 1900MT/s DDR timing to bring consistency
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Ashish Kumar
11d5f7d895 armv8: ls1088aqds: Enable mdio commands on u-boot prompt
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Mario Six
9a519dfe8a ihs_mdio: Make DM-compatible
Make the ihs_mdio driver DM-compatible, while retaining the old
functionality for not-yet-converted boards.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:23 -04:00
Mario Six
9139ac9d49 ihs_mdio: Encapsulate register access
To prepare for DM conversion, encapsulate all register accesses in
function calls.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:22 -04:00
Eugen Hristev
528a42a795 board: sama5d27_som1_ek: Fix the USB vbus power
According to the REVB schematic, fix the USB vbus power enable pin.

Based on original work by Wenyou Yang

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-08 09:07:36 -04:00
Eugen Hristev
23dd6015ce board: sama5d2_ptc_ek: adjust the smc timings of nand
To fix the issue of write the rootfs.ubi, adjust the smc timings
configuration of the nand controller.

Based on original work by Wenyou Yang

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-08 09:07:36 -04:00