Commit graph

413 commits

Author SHA1 Message Date
Patrick Delaunay
9819fe345c stm32mp1: ram: remove the support of calibration result
The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.

The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by the CubeMX DDR utilities.

This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
  the optional parameter "st,phy-cal"

After this patch, the built-in calibration is always executed
and the calibration registers are moved in the phy dynamic part;
that allows manual tests.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30 16:43:28 +01:00
Simon Glass
0bf61aced2 sandbox: mmc: Support a backing file
Provide a way for sandbox MMC to present data from a backing file. This
allows a filesystem to be created on the host and easily served via an
emulated mmc device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28 16:51:51 -07:00
Etienne Carriere
fcb41d4db2 dt-bindings: arm: scmi: OP-TEE as transport channel for SCMI messages
Introduce compatible "linaro,scmi-optee" for SCMI transport channel
based on an OP-TEE service invocation.

Define "linaro,optee-channel-id" property to identify the OP-TEE SCMI
channel used by the protocol(s). OP-TEE SCMI transport can either use
shared memory or a static shared memory buffer identified by the DT.

These bindings were posted to the Linux kernel DT bindings mailing list
and acked by maintainer [1].

Link: [1] https://lore.kernel.org/linux-arm-kernel/20211029102118.GG6526@e120937-lin/T/
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-11-23 13:53:03 -05:00
Mark Kettenis
b814e0007e pinctrl: Add Apple pinctrl driver
This driver supports both pin muxing and GPIO support for the
pin control logic found on Apple SoCs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-11-17 17:04:58 -05:00
Dzmitry Sankouski
324df15a29 serial: qcom: add support for GENI serial driver
Generic Interface (GENI) Serial Engine (SE) based uart
can be found on newer qualcomm SOCs, starting from SDM845.
Tested on Samsung SM-G9600(starqltechn)
by chain-loading u-boot with stock bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2021-10-31 08:46:44 -04:00
Mark Kettenis
40dbf03d7d iommu: Add IOMMU uclass
This uclass is intended to manage IOMMUs on systems where the
IOMMUs are not in bypass mode by default.  In that case U-Boot
cannot ignore the IOMMUs if it wants to use devices that need
to do DMA and sit behind such an IOMMU.

This initial IOMMU uclass implementation does not implement and
device ops and is intended for IOMMUs that have a bypass mode
that does not require address translation.  Support for IOMMUs
that do require address translation is planned and device ops
will be defined when support for such IOMMUs will be added.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Hannes Schmelzer
bba76a17bd drivers/gpio: add support for MAX7320 i2c i/o expander
This commit adds support for the MAX7320 (and clones) gpio expander.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2021-10-19 11:25:24 -04:00
Dan Sneddon
2d2273fa1e dt-bindings: pwm: pwm-at91: Add PWM bindings for A5D2
Document the bindings needed for the PWM device on the SAMA5D2.

Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com>
2021-10-12 15:18:39 +03:00
Wolfgang Denk
0cf207ec01 WS cleanup: remove SPACE(s) followed by TAB
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30 09:08:16 -04:00
Wolfgang Denk
c72231d272 WS cleanup: remove excessive empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30 08:08:56 -04:00
Wolfgang Denk
66356b4c06 WS cleanup: remove trailing empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30 08:08:56 -04:00
Tom Rini
6eecaf5d0f Merge branch 'network_master' of https://source.denx.de/u-boot/custodians/u-boot-net into next
- Fix some non-NULL terminated strings in the networking subsystem
- net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-29 07:58:20 -04:00
Vladimir Oltean
77b11f7604 net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)

which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881

TL;DR: "xfi" was standardized in Linux as "10gbase-r".

This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28 18:50:56 +03:00
Simon Glass
7de8bd03c3 treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...
The current API is outdated as it requires a devicetree pointer.

Move these functions to use the ofnode API and update this globally. Add
some tests while we are here.

Correct the call in exynos_dsim_config_parse_dt() which is obviously
wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Jorge Ramirez-Ortiz
cc5afabc9d drivers: tpm2: update reset gpio semantics
Use the more generic reset-gpios property name.

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-24 14:36:50 -04:00
Tom Rini
6674edaabf Prepare v2021.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFBKRgACgkQFHw5/5Y0
 tyw/PwwAtGB3rBeYW4rjWuMC5WP1UDTnvZIAok5ImWumWDahjDm8Yq2VCzAe9adw
 EYBjuNmaNl9aQvGVqlVJeIcLku5MLuLQu2za8vhc1R8X9VTPPY+LLTcdOokOmB8y
 8JiaE7fJsb1bZeV+diF9tss3B0IkUrwSJtW1d+qfdz/4UiRvwK5BhnZgzIobDldO
 g1Ldz/xiR2GOAXlUMwDrNAi6qNvmeAqRsQxySVrjltAV2ST7LJnOiHuWvJX6g6VS
 l796Hleh/kULfEW6n+1ZaTNqvVRcJ8xYSOG8w8y9u6HuPBA3JrYH1p1Eo5n7PPDv
 US71Iy/ncweTyfTMEBThWLqjHOQ05sVkWX/r4fj2iJRli+Og53lE1fVJ4ajIx7vz
 Tc76wI43i0I5lr2yTErjUG6EzDDoueqd+c8BwxihNLUK/+QG31xoCEMfC80C25ro
 QhYVFgiPWN0ySUD5M5tbGXODvfNNIDKXpY5oSOTVtemZtDEMpO2zBM1s/K3RV7Ud
 Je9Pj0Cu
 =Me42
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
2021-09-16 10:29:40 -04:00
Simon Glass
19e699fb2b doc: Complete the list of available runtime-config options
The current list is missing a few items. Add them.

Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11 11:02:02 +02:00
Simon Glass
8eb4a76d85 doc: Tidy up the bindings for the config/ node
Sort these and add a type so it is clear how to set the value. Add a note
about usage to the top. Correct the 'no-keyboard' binding which is missing
a prefix.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11 11:02:02 +02:00
Rasmus Villemoes
2ac8490412 watchdog: add gpio watchdog driver
A rather common kind of external watchdog circuit is one that is kept
alive by toggling a gpio. Add a driver for handling such a watchdog.

The corresponding linux driver apparently has support for some
watchdog circuits which can be disabled by tri-stating the gpio, but I
have never actually encountered such a chip in the wild; the whole
point of adding an external watchdog is usually that it is not in any
way under software control. For forward-compatibility, and to make DT
describe the hardware, the current driver only supports devices that
have the always-running property. I went a little back and forth on
whether I should fail ->probe or only ->start, and ended up deciding
->start was the right place.

The compatible string is probably a little odd as it has nothing to do
with linux per se - however, I chose that to make .dts snippets
reusable between device trees used with U-Boot and linux, and this is
the (only) compatible string that linux' corresponding driver and DT
binding accepts. I have asked whether one should/could add "wdt-gpio"
to that binding, but the answer was no:

  https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/

If someone feels strongly about this, I can certainly remove the
"linux," part from the string - it probably wouldn't the only place where
one can't reuse a DT snippet as-is between linux and U-Boot.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-31 12:04:03 +02:00
Nandor Han
c50b21b705 bootcount: add a new driver with syscon as backend
The driver will use a syscon regmap as backend and supports both
16 and 32 size value. The value will be stored in the CPU's endianness.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-22 11:04:52 +02:00
Patrick Delaunay
551a959a8c doc: stm32mp1: add page for device tree bindings
With device tree binding migration to yaml it is difficult to synchronize
the binding from Linux kernel to U-Boot.

Instead of maintaining the same dt bindings, this patch adds in the U-Boot
documentation the path to the device tree bindings in Linux kernel for
STMicroelectronics devices, when they are used without modification.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Add links for referenced text files.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14 20:54:41 +02:00
Marek Behún
5534fb4f48 arm64: a37xx: pinctrl: Correct PWM pins definitions
The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).

The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"

This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".

Change the "pwmN" groups to support "led" function.

Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Nandor Han
c74675bd90 reboot-mode: read the boot mode from RTC memory
RTC devices could provide battery-backed memory that can be used for
storing the reboot mode magic value.

Add a new reboot-mode back-end that uses RTC to store the reboot-mode
magic value. The driver also supports both endianness modes.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 10:16:39 -04:00
Nandor Han
f9db2f16cb reboot-mode: read the boot mode from GPIOs status
A use case for controlling the boot mode is when the user wants
to control the device boot by pushing a button without needing to
go in user-space.

Add a new backed for reboot mode where GPIOs are used to control the
reboot-mode. The driver is able to scan a predefined list of GPIOs
and return the magic value. Having the modes associated with
the magic value generated based on the GPIO values, allows the
reboot mode uclass to select the proper mode.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 10:16:39 -04:00
Simon Glass
f5cbb5c7cd x86: pci: Allow binding of some devices before relocation
At present only bridge devices are bound before relocation, to save space
in pre-relocation memory. In some cases we do actually want to bind a
device, e.g. because it provides the console UART. Add a devicetree
binding to support this.

Use the PCI_VENDEV() macro to encode the cell value. This is present in
U-Boot but not used, so move it to the binding header-file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15 19:49:50 +08:00
Vignesh Raghavendra
5d5a699855 firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.
On J721e and J7200, MCU R5 core (boot master) itself would run Device
Manager (DM) Firmware and interact with TI Foundational Security (TIFS)
firmware to enable DMA and such other Resource Management (RM) services.
So, during R5 SPL stage there is no such RM service available and ti_sci
driver will have to directly interact with TIFS using DM to DMSC
channels to request RM resources.

Therefore add DT binding and driver for the same. This driver will
handle Resource Management services at R5 SPL stage.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210607141753.28796-4-vigneshr@ti.com
2021-06-11 19:18:52 +05:30
Dave Gerlach
760b7488f5 dt-bindings: memory-controller: Add K3 AM64 DDRSS compatible
Update the k3-ddrss DT binding document to include compatible
for k3,am64-ddrss.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12 16:30:52 +05:30
Sean Anderson
54aa07fdfc sysinfo: Add gpio-sysinfo driver
This uses the newly-added dm_gpio_get_values_as_int_base3 function to
implement a sysinfo device. The revision map is stored in the device tree.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-04 07:57:18 -04:00
Igal Liberman
75ae51c593 doc: dt-bindings: add Marvell comphy binding
Change-Id: I29094afb646744afe78ad09bb7479894d1a65e96
Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29 07:45:24 +02:00
Ying-Chun Liu (PaulLiu)
a606106402 doc: device-tree-bindings: regulator: anatop regulator
Document the bindings for fsl,anatop-regulator

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-20 07:31:12 -04:00
Tom Rini
45b3cf88da Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
update ls1028aqds networking protocol, config in ls1021atwr, env in ls1012a
Add seli3 board support, booke watchdog, update eTSEC support in ppc-qemu
Add DM_SERIAL and lpuart in sl28, add DM_ETH support for some of powerpc platforms

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 13:11:19 -04:00
Bin Meng
05153702d3 dt-bindings: net: Update Freescale TSEC to support "queue-group"
At present the Freescale TSEC node DT bindings doc requires a <reg>
property in the TSEC node. But this might not always be the case.
In the upstream Linux kernel, there is no DT bindings doc for it
but the kernel driver tests a subnode of a name prefixed with
"queue-group", as we can see from gfar_of_init():

  for_each_available_child_of_node(np, child) {
      if (!of_node_name_eq(child, "queue-group"))
  ...

in drivers/net/ethernet/freescale/gianfar.c

Update our DT bindings to describe this alternate description.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Bin Meng
1c196b308a dt-bindings: net: Add the old DT bindings for "fixed-link"
Per the upstream Linux kernel doc:

  Documentation/devicetree/bindings/net/ethernet-controller.yaml

There are two ways to describe a fixed PHY attached to an Ethernet
device. This updates our dt-bindings doc to add the old DT bindings.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Wolfgang Wallner
da35d7af33 dt-bindings: fsp: Fix Apollo Lake FSP-S devicetree bindings
An entry is missing in the FSP-S devicetree bindings, and as a result
the description for the next few following entries is off by one line.

Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-15 10:43:17 +08:00
Etienne Carriere
1f213ee4db firmware: scmi: voltage regulator
Implement voltage regulators interfaced by the SCMI voltage domain
protocol. The DT bindings are defined in the Linux kernel since
SCMI voltage domain and regulators patches [1] and [2] integration
in v5.11-rc7.

Link: [1] 0f80fcec08
Link: [2] 2add5cacff
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12 17:17:11 -04:00
Alper Nebi Yasak
1b9ee2882e pwm: Add a driver for Chrome OS EC PWM
This PWM is used in rk3399-gru-bob and rk3399-gru-kevin to control
the display brightness. We can only change the duty cycle, so on
set_config() we just try to match the duty cycle that dividing duty_ns
by period_ns gives us. To disable, we set the duty cycle to zero while
keeping the old value for when we want to re-enable it.

The cros_ec_set_pwm_duty() function is taken from Depthcharge's
cros_ec_set_bl_pwm_duty() but modified to use the generic pwm type.
The driver itself is very loosely based on rk_pwm.c for the general pwm
driver structure.

The devicetree binding file is from Linux, before it was converted to
YAML at 5df5a577a6b4 ("dt-bindings: pwm: Convert google,cros-ec-pwm.txt
to YAML format") in their repo.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-10 16:08:39 +02:00
Tom Rini
7d23eb9260 First set of u-boot-atmel features for 2021.07 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmBi3oscHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyKr+CACDQJT4hGCDwc7XFjOw
 RN0aGRC6eGF4q3kL4VjBazCM1SBNs3vdVZV+bnYl3ioSNzy43K7CyFqqUlJH7CJV
 dakvNn71xVoQD3Xw3+I4ALibbD/tlli4vwMOeN4KlWCIdNrRrtUOQpli0M0BVDkL
 0IWMDf6OLAfw1uytubsQBVitFBQoiuE3ihSphoyTOFwQdI+xsMue5uVq+O0kDqU4
 gotBzmoSq5LONyNSdpHxXqujU4oXkuOr/TsVTOoRtEkQ63zVbfNWOg951is+UaHa
 F7f6W+cWdlb+HBs6TFb+Gva0TMmyWIH05jyIS52k6uFVM0tyFCOJFeZp81cjPP4L
 O3KI
 =ywRG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2021.07-a' of https://source.denx.de/u-boot/custodians/u-boot-atmel into next

First set of u-boot-atmel features for 2021.07 cycle:
This small feature set includes the implementation of the slew rate for
the PIO4 pin controller device, and a fix for arm926ejs-based
microprocessors that avoids a crash.
2021-03-30 11:24:09 -04:00
Simon Glass
80a4570c99 x86: coral: Show memory config and SKU ID on startup
Provide the model information through sysinfo so that it shows up on
boot. For memconfig 4 pins are provided, for 16 combinations. For SKU
ID there are two options:

   - two pins provided in a ternary arrangement, for 9 combinations.
   - reading from the EC

Add a binding doc and drop the unused #defines as well.

Example:

   U-Boot 2021.01-rc5

   CPU:   Intel(R) Celeron(R) CPU N3450 @ 1.10GHz
   DRAM:  3.9 GiB
   MMC:   sdmmc@1b,0: 1, emmc@1c,0: 2
   Video: 1024x768x32 @ b0000000
   Model: Google Coral (memconfig 5, SKU 3)

This depends on the GPIO series:

   http://patchwork.ozlabs.org/project/uboot/list/?series=228126

Signed-off-by: Simon Glass <sjg@chromium.org>

Acked-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-27 16:26:48 +13:00
Claudiu Beznea
f031bb304d dt-bindings: pinctrl: at91-pio4: add slew-rate
Document slew-rate DT binding for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-03-02 09:28:33 +02:00
Marek Szyprowski
e1b03d6b0b dt-bindings: input: adc-keys bindings documentation
Dump adc-keys bindings documentation from Linux kernel source tree from
commit 698dc0cf9447 ("dt-bindings: input: adc-keys: clarify
description").

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-18 11:37:26 +01:00
Chunfeng Yun
eb885c98ed dt-bindings: usb: mtk-xhci: add optional properies to disable ports
Add optional properies to disable usb2 or usb3 ports, they are used
when provided ports are not used on some special platforms.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2021-02-10 22:23:24 +01:00
Suman Anna
468ec2f3ef remoteproc: k3_r5: Sync to upstreamed kernel DT property names
The K3 R5F remoteproc driver in U-Boot was upstreamed prior to the
equivalent remoteproc driver in the Linux kernel. Some of the DT
properties used in U-Boot got upstreamed using different names
in Linux kernel.

The modified property names include the R5F cluster mode configuration
property "lockstep-mode"; and three different individual R5F core config
properties - "atcm-enable", "btcm-enable" and "loczrama". The property
names were updated as follows:
  lockstep-mode => ti,cluster-mode
  atcm-enable   => ti,atcm-enable
  btcm-enable   => ti,btcm-enable
  loczrama      => ti,loczrama

Update the K3 R5F remoteproc driver, the corresponding binding, and
all the existing usage in AM65x, J721E and J7200 dts files all at
once to use the new properties and to not break any bisectability.

Signed-off-by: Suman Anna <s-anna@ti.com>
2021-02-04 20:37:56 +05:30
Ying-Chun Liu (PaulLiu)
e89ef172f8 doc: device-tree-bindings: rtc: Abracon AB x80x i2c rtc
Document the bindings for abracon,abx80x and related compatibles.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
2021-01-27 17:07:48 -05:00
Eugen Hristev
63c27c3e66 dt-bindings: pinctrl: at91-pio4: add property for drive strength
Add drive strength property which is equivalent with the one in Linux

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-22 15:09:59 +02:00
Vikhyat Goyal
1ac1a04b9e video: seps525: Add dt binding description
Added dt binding for seps525 display driver.

Signed-off-by: Vikhyat Goyal <vikhyat.goyal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05 11:54:53 +01:00
Sean Anderson
0d98f6de62 spi: dw: Document devicetree binding
This documentation has been taken from Linux commit 3d7db0f11c7a ("spi: dw:
Refactor mid_spi_dma_setup() to separate DMA and IRQ config"), immediately
before the file was deleted and replaced with a yaml version. Additional
compatible strings from newer versions have been added, as well as a few
U-Boot-specific ones.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Patrick Delaunay
c480138958 phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off
This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 12:02:58 +01:00
Sean Anderson
6e35c1cb12 pinctrl: k210: Rename power domains to match datasheet
This renames power domains to match the names on the k210 datasheet.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-17 15:09:28 +08:00
Simon Glass
f969653154 smbios: Add documentation and devicetree binding
Add information about how to set SMBIOS properties using the devicetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 10:18:20 +08:00
Simon Glass
49337238ef doc: Add a binding for sysinfo
Add a simple binding file for this, so that it is clear what this binding
directory is for.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 10:18:20 +08:00