Commit graph

1196 commits

Author SHA1 Message Date
Andre Renaud
62f8183f6a mtd: nand: Drop a blank line in nand_wait()
This empty line should not be there. Remove it.
Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-24 17:23:14 -04:00
Tom Rini
2313d48445 Merge git://git.denx.de/u-boot-nand-flash 2016-06-20 05:15:52 -04:00
Boris Brezillon
30780f9483 mtd: nand: Patch remaining places where nand_to_mtd() should be used
Some drivers are still directly accessing the chip->mtd field. Patch
them to use nand_to_mtd() instead.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-06-19 19:28:38 -05:00
Max Krummenacher
e1c29086d5 nand: nand torture: follow sync with linux v4.6
follow parameter name change (nand to mtd) to fix compiler error.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-06-19 19:19:30 -05:00
Boris Brezillon
7748b41482 spl: nand: sunxi: add support for NAND config auto-detection
NAND chips are supposed to expose their capabilities through advanced
mechanisms like READID, ONFI or JEDEC parameter tables. While those
methods are appropriate for the bootloader itself, it's way to
complicated and takes too much space to fit in the SPL.

Replace those mechanisms by a dumb 'trial and error' mechanism.

With this new approach we can get rid of the fixed config list that was
used in the sunxi NAND SPL driver.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:12:02 -05:00
Boris Brezillon
4e7d1b3beb spl: nand: sunxi: split 'load page' and 'read page' logic
Split the 'load page' and 'read page' logic in 2 different functions so
we can later load the page and test different ECC configs without the
penalty of reloading the same page in the NAND cache.

We also move common setup to a dedicated function (nand_apply_config()) to
avoid rewriting the same values in NFC registers each time we read a page.

These new functions are passed a pointer to an nfc_config struct to limit
the number of parameters.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:12:01 -05:00
Boris Brezillon
bb9783b66b spl: nand: sunxi: rework status polling loop
check_value_xxx() helpers are using a 1ms delay between each test, which
can be quite long for some operations (like a page read on an SLC NAND).
Since we don't have anything to do but to poll this register, reduce the
delay between each test to 1us.

While we're at it, rename the max_number_of_retries parameters and the
MAX_RETRIES macro into timeout_us and DEFAULT_TIMEOUT_US to reflect that
we're actually waiting a given amount of time and not only a number of
retries.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:12:01 -05:00
Boris Brezillon
fa30115878 spl: nand: sunxi: stop guessing the redundant u-boot offset
Use CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND value instead of trying to guess
where the redundant u-boot image is based on simple (and most of the time
erroneous) heuristics.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>

# Conflicts:
#	drivers/mtd/nand/sunxi_nand_spl.c
2016-06-19 19:12:01 -05:00
Boris Brezillon
80ef700f8d spl: nand: support redundant u-boot image
On modern NAND it's more than recommended to have a backup copy of the
u-boot binary to recover from corruption: bitflips are quite common on
MLC NANDs, and the read-disturbance will corrupt your u-boot partitition
more quickly than what you would see on an SLC NAND.

Add an extra Kconfig option to specify the offset of the redundant u-boot
image.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
[scottwood: added ifdef to fix build break]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-19 19:11:57 -05:00
Boris Brezillon
494e108651 spl: nand: rework SYS_NAND_U_BOOT_OFFS Kconfig option dependency
The SYS_NAND_U_BOOT_OFFS is quite generic, but the Kconfig entry is forced
to explicitly depend on platforms that are not already defining it in their
include/configs/<board>.h header.

Add the SYS_NAND_U_BOOT_LOCATIONS option, make the SYS_NAND_U_BOOT_OFFS
depends on it, remove the dependency on NAND_SUNXI and make it dependent
on SPL selection.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 19:11:48 -05:00
Boris Brezillon
c4adf9db5d spl: nand: sunxi: remove support for so-called 'syndrome' mode
The sunxi SPL NAND controller driver supports use 'BootROM'-like configs,
that is, configs where the ECC bytes and real data are interleaved in the
page instead of putting ECC bytes in the OOB area.

Doing that has several drawbacks:
- since you're interleaving data and ECC bytes you can't use the whole page
  otherwise you might override the bad block marker with non-FF bytes.
- to solve the bad block marker problem, the ROM code supports partially
  using the page, but this introduces a huge penalty both in term of read
  speed and NAND memory usage. While this is fine for rather small
  binaries(like the SPL one which is at maximum 24KB large), it becomes
  non-negligible for the bootloader image (several hundred of KB).
- auto-detection of the page size is not reliable (this is in my opinion
  the biggest problem). If you get the page size wrong, you'll end up
  reading data at a different offset than what was specified by the caller
  and the reading may succeed (if valid data were written at this address).

For all those reasons I think it's wiser to completely remove support for
'syndrome' configs. If we ever need to support it again, then I'd recommend
specifying all the config parameters through Kconfig options.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-06-19 18:52:35 -05:00
Tom Rini
fd9102dafe Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-06-13 08:50:58 -04:00
Andre Renaud
65319f15ca at91: nand: Set up the ECC strength correctly
This needs to be set to avoid a fatal error when ECC is used.

Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Andre Renaud
5a9ae33316 at91: Correct NAND ECC register access
This uses the wrote base register value. Fix it.

Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Tom Rini
3fc304b8d7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-12 12:51:34 -04:00
Heiko Schocher
3a504d9639 mtd: nand: omap: allow to switch to BCH16
support in omap_nand_switch_ecc() also an eccstrength
from 16.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:12 -04:00
Heiko Schocher
5d29e27eb9 nand: add nand mtd concat support
add for nand devices mtd concat support. Generic MTD concat
support is already ported to mainline, and used in the cfi_mtd
driver. This patch adds it similiar for nand devices.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:12 -04:00
Tom Rini
715b3a9b24 Merge git://git.denx.de/u-boot-nand-flash 2016-06-04 08:49:47 -04:00
Max Krummenacher
667067faa1 nand: fix nand torture to use changed mtd api
The mtd subsystem deprecated and renamed the direct use of the mtd_info
struct's functionpointers. Instead the corresponding mtd_xxx function
should be used.

See also:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3c3c10bba1e4ccb75b41442e45c1a072f6cded19

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-06-03 20:29:05 -05:00
Scott Wood
ceee07b658 mtd: nand: Sync with Linux v4.6
Updates the NAND code to match Linux v4.6.  The previous sync was from
Linux v4.1 in commit d3963721d9.

Note that none of the individual NAND drivers tracked Linux closely
enough to be synced themselves, other than manually applying a few
cross-tree changes.

Signed-off-by: Scott Wood <oss@buserror.net>
Tested-by: Heiko Schocher <hs@denx.de>
2016-06-03 20:27:48 -05:00
Scott Wood
81c772521f mtd: nand: Add page argument to write_page() etc.
This change is part of the Linux 4.6 sync.  It is being done before the
main sync patch in order to make it easier to address the issue across
all NAND drivers (many/most of which do not closely track their Linux
counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
17cb4b8f32 mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
b616d9b0a7 nand: Embed mtd_info in struct nand_chip
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.

This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip.  It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
151c06ec61 mtd: nand: Remove nand_info_t typedef
This typedef serves no purpose other than causing confusion with
struct nand_chip.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
ea7d1eec66 mtd: nand: Remove docg4 driver and palmtreo680 flashing tool
Commit ad4f54ea86 ("arm: Remove palmtreo680 board") removed the only
user of the docg4 driver and the palmtreo680 image flashing tool.  This
patch removes them.

Signed-off-by: Scott Wood <oss@buserror.net>
Cc: Mike Dunn <mikedunn@newsguy.com>
Cc: Simon Glass <sjg@chromium.org>
2016-06-03 20:27:48 -05:00
Marek Vasut
5d74e3a6f1 mtd: nand: Remove jz4740 driver
This driver is not used by anyone, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Scott Wood <oss@buserror.net>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Siva Durga Prasad Paladugu
a39d14406a mtd: nand: arasan_nfc: Correct nand ecc initialization
Correct the nand ecc initialization code
This fixes the issue of incorrect nand ecc
init if no device is found in ecc_matrix then
it endsup ecc init with junk initialization
instead of the most suited one.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2016-06-03 20:27:48 -05:00
Prabhakar Kushwaha
d074c06ba7 driver: mtd: spi: Adding support for QSPI flash
Serial number, vendor id and page size are added for QSPI flash
common on both LS1012AQDS and LS1012ARDB i.e. S25FS512SDSMFI011.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:49 -07:00
Lokesh Vutla
0985294604 mtd: nand: am335x: spl: Fix copying of image
When offset is not aligned to page address, it is possible that extra offset
will be read from nand. Adjust the image such that first byte of the image
is at load address after the first page is read.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:41:41 -04:00
Lokesh Vutla
00d559561e spl: Support loading a FIT from SPI
Detect a FIT when loading from SPI and handle it using the
new FIT SPL support.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:41:40 -04:00
Tom Rini
fc15b9beed Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-05-24 13:42:03 -04:00
Peng Fan
9aa550d2e8 mtd: nand: mxs: use simpler runtime cpu dection macros
Use simpler runtime cpu dection macros.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Scott Wood <oss@buserror.net>
2016-05-24 14:59:57 +02:00
Purna Chandra Mandal
5c99045699 drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.
PIC32 internal flash devices are parallel NOR flash divided into
number of banks to allow erase-programming in one while fetch and
execution continues on other. As the flash banks are memory mapped
stored code can be executed directly from flash (XIP), also there
is additional hardware logic to prefetch and cache contents to
improve execution performance. These flash can also be used to
store user data (like environment).
Flash erase and programming are handled by on-chip NVM controller.

Driver implemented driver model but MTD is not really support.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-21 01:25:50 +02:00
Yuan Yao
80c1bfd233 sf: Disable 4-KB erase command for SPANSION S25FS-S family
The S25FS-S family physical sectors may be configured as a hybrid
combination of eight 4-kB parameter sectors at the top or bottom
of the address space with all but one of the remaining sectors
being uniform size.
The default status of the flash is in this hybrid architecture.
The parameter sectors and the uniform sectors have different erase
commands.
This patch disable the hybrid sector architecture then the flash will
has uniform sector size and uniform erase command.
This configuration is temporary, the flash will revert to hybrid
architecture after power on reset.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:24 -07:00
Yuan Yao
febffe8dd1 spi: fsl_qspi: Enable Spansion S25FS-S family flashes
The flash type of LS2085AQDS QSPI is S25FS256S. It has special write
any device register command and read any device register command.
This patch enable support for those commands.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:16 -07:00
Marek Vasut
7e0f22674a SPL: Let spl_parse_image_header() return value
Allow the spl_parse_image_header() to return value. This is convenient
for controlling the SPL boot flow if the loaded image is corrupted.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@konsulko.com>
2016-05-17 17:52:20 +02:00
Vagrant Cascadian
eae4b2b67b Fix spelling of "occurred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-02 18:37:09 -04:00
Stephen Warren
11b9a4d8d9 sf: fix timebase data type in _wait_ready()
get_timer() returns an unsigned 64-bit value, but is currently assigned to
a signed 32-bit variable. Due to sign extension and data truncation, this
causes the timeout loop in spi_flash_cmd_wait_ready() to immediately (and
incorrectly) fire for about 50% of all time values, based on whether bit
31 is set. In sandbox at least, this causes the test to pass or fail based
on system uptime, as opposed to time since the U-Boot binary was started.

Fixes: 4efad20a17 ("sf: Update status reg check in spi_flash_cmd_wait_ready")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-04-25 15:10:30 -04:00
Heiko Schocher
68fc449033 mtd, ubi: set free_count to zero before walking through erase list
Set free_count to zero before walking through ai->erase list
in wl_init().

As U-Boot has no workqueue/threads, it immediately calls
erase_worker(), which increase for each erased block
free_count. Without this patch, free_count gets after
this initialized to zero in wl_init(), so the free_count
variable always has the maybe wrong value 0.

Detected this behaviour on the dxr2 board, where the
UBI fastmap gets not written when attaching/dettaching
on an empty NAND. It drops instead the error message:

could not find any anchor PEB

With this patch, fastmap gets written on dettach.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-22 11:47:37 +02:00
Rouven Behr
7570a0cc75 mtd: cfi: Unlock current sector instead of sector 0 before buffered write
Unlock current sector instead of sector 0 before buffered write.

[Patch subject and commit text slightly reworded, Stefan]

Signed-off-by: Rouven Behr <u-boot@behr-iss.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-13 13:43:37 +02:00
Vikas Manocha
9082517a85 stm32: stm32_flash: add memory barrier during flash write
After writing data to flash space, next instruction is checking if flash
controller is busy writing to the flash memory. Memory barrier is required here
to avoid transaction re-ordering for data write and busy status check.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-04-11 20:48:23 -04:00
Purna Chandra Mandal
6d9481047e drivers: remove writes{b,w,l,q} and reads{b,w,l,q}.
Definition of writes{bwlq}, reads{bwlq} are now added into arch specific
asm/io.h. So removing them from driver to fix re-definition error

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-04-10 17:18:41 +02:00
Chris Packham
46a16bd895 kirkwood_nand: claim MPP pins on the fly
Claim the MPP pins for the NAND flash controller only when it's actually
being used. This allows the pins to be shared with the SPI interface
which already supports an equivalent on-access MPP reconfiguration.

Reviewed-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-06 15:40:33 +02:00
Graham Moore
15305c2f03 mtd: nand: denali: max_banks calculation changed in revision 5.1
Read Denali hardware revision number and use it to
calculate max_banks,  The encoding of max_banks changed
in Denali revision 5.1.

[ Linux commit : 271707b1d817f5104e02b2bd1bab43f0c8759418 ]

Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
[Brian: parentheses around macro arg]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
[Masahiro: import from Linux and adjust ioread32() to readl() ]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:16:55 +09:00
Vasily Khoruzhick
edc498c651 cfi_flash: return device into read array mode after reading status
Otherwise flash remains in read status mode and it's not possible
to access data on flash.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
2016-03-27 09:13:02 -04:00
Vikas Manocha
9ecb0c416c stm32: stm32f4: move flash driver to mtd driver location
Same flash driver can be used by other stm32 families like stm32f7.
Better place for this driver would be mtd driver location.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-03-26 18:49:28 -04:00
Masahiro Yamada
73b5b27b7a mtd: denali: fix warning when compiled for 64bit system
The 64-bit compiler (ex. aarch64) emits "warning: cast from pointer
to integer of different size".

Make it work with 64bit DMA address while I am here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-24 01:36:49 +09:00
Marek Vasut
ea9619aed6 sf: Correct data types in stm_is_locked_sr()
The stm_is_locked_sr() function is picked from Linux kernel. For reason
unknown, the 64bit data types used by the function and present in Linux
were replaced with 32bit unsigned ones, which causes trouble.

The testcase performed was done using ST M25P80 chip.
The command used was:
 => sf protect unlock 0 0x10000

The call chain starts in stm_unlock(), which calls stm_is_locked_sr()
with negative ofs argument. This works fine in Linux, where the "ofs"
is loff_t, which is signed long long, while this fails in U-Boot, where
"ofs" is u32 (unsigned int). Because of this signedness problem, the
expression past the return statement to be incorrectly evaluated to 1,
which in turn propagates back to stm_unlock() and results in -EINVAL.

The correction is very simple, just use the correctly sized data types
with correct signedness in the function to make it work as intended.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-03-12 19:55:42 +05:30
Simon Glass
0badb23d11 spi: Correct two error return values
When an error number is provided we should use it, not change it. This fixes
the SPI and SPI flash tests.

One of these is long-standing. The other seems to have been introduced by
commit 1e90d9fd (sf: Move read_id code to sf_ops).

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 1e90d9fd (sf: Move read_id code to sf_ops)
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2016-02-26 08:53:10 -07:00
Simon Glass
ffe276d27a sandbox: spi: Remove an incorrect free()
We must not free data that is managed by driver mode. Remove this line,
which is a hangover from the pre-driver-model code.

This fixes a problem where 'sf probe' crashes U-Boot if the backing file
for the SPI flash cannot be found.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-26 08:53:10 -07:00