Commit graph

28 commits

Author SHA1 Message Date
Michal Simek
ad5b580126 ARM: zynq: Simplify zynq configuration
Extending Kconfig for adding new platform is a lot of work
for nothing. Setting SYS_CONFIG_NAME directly in Kconfig and
remove all dependencies on TARGET_ZYNQ_* options including SPL.
As a side-effect it also remove custom init folder for ps7_init_gpl.*
files. Folder is chosen based on device-tree file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 13:22:50 +02:00
Michal Simek
f44e603f73 ARM: zynq: Call ps7_post_config() for SPL
If ps7_post_config() is defined call it. It is enabling for example
level shifters for PL bitstreams.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:01 +02:00
Michal Simek
9a23f458cb ARM: zynq: Add support for SPL_LOAD_FIT
Enable minimal function to be able to compile SPL_LOAD_FIT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:00 +02:00
Siva Durga Prasad Paladugu
f17abcaedb gpio: zynq: Move the definitions to driver file
Move all the gpio definitions to driver file as
there is no use of them in other files.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
de77a03bf2 gpio: zynq: Remove non driver model code
Remove non driver model support as it moved
to driver model. Dont need non driver model
anymore.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Joe Hershberger
a509a1d402 net: gem: Allow to set the MAC from an EEPROM
Provide board specific option how to read MAC address from ROM.
Do it in generic way to be reusable by differnet boards.
If this is not enough board specific functions can be created.

Signed-off-by: Joe Hershberger <joe.hershberger@gmail.com> # driver part
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:27:54 +02:00
Tom Rini
f8a4826383 spl: arm: Make sure to include all of the u_boot_list entries
Starting with 96e5b03 we use a linker list for partition table
information.  However since we use this in SPL we need to make sure that
the SPL linker scripts include these as well.  While doing this, it's
best to simply include all linker lists to future proof ourselves.

Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reported-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-16 15:27:55 -04:00
Michal Simek
e832a142b9 ARM: zynq: Remove unused SPI base addresses
Remove unused macros. Adresses are taken from DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-02-22 16:20:59 +01:00
Michal Simek
67b2904819 ARM: zynq: Remove memory division by 2 for ECC case
For ECC case u-boot divided memory by 2 because one u-boot could be used
for both cases when ECC is off or on.
Remove this division and make sure that dts file contain the correct
memory size when ECC is enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Nathan Rossi
f0b567bf0a ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO
Add ps7_init_gpl.c/h for the ZYBO board. This instance of the ps7_init
is generated by the Vivado 2015.3 tools using the system configuration
provided by Digilent located on their website.

Update the kconfig so that the defconfig is not overrided to use the
custom init ps7_init_gpl target by default.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-18 13:15:57 +01:00
Michal Simek
d9ae52c8f0 zynq: sdhci: Move driver to DM
Move driver to DM

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:29 +01:00
Michal Simek
400434537b zynq: sdhci: Remove zynq_sdhci_of_init()
Prepare for using DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07 10:14:29 +01:00
Michal Simek
769afa54c6 ARM: zynq: Remove unused SERIAL macros for serial_zynq
Remove unused macros when driver was moved to DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07 10:14:29 +01:00
Michal Simek
1e370ef7e7 ARM: zynq: Remove zc70x target
Remove zc70x target which was one setting for zc702 and zc706.
Currently zc702 and zc706 are separated.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-04 14:49:53 +01:00
Simon Glass
71556fbcbf dm: arm: zynq: Enable device tree control in SPL
Move to using device tree control in SPL so that we can use the same driver
code in both SPL and U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Simon Glass
c54c0a4c1c arm: zynq: Support the debug UART
Add support for the debug UART to assist with early debugging. Enable it
for Zybo as an example.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:52 +01:00
Simon Glass
bd44758a41 arm: zynq: Drop unnecessary code in SPL board_init_f()
Move to the new way of starting up SPL. Clearing of BSS and calling
board_init_r() is now handled by crt0.S.

Also tidy up the header include order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:52 +01:00
Simon Glass
5fa030b9f0 zynq: Move SPL console init out of board_init_f()
We should not init the console this early since it precludes using driver
model for the UART, since it is not set up at the start of board_init_f().
See the README for more information. The debug UART does not have this
restriction. If we want to do early init with the console on it can be done
in spl_board_init().

Move the preloader_console_init() call from board_init_f() to board_init_r().

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-10-24 13:50:37 -04:00
Heiko Schocher
92a3188d7d bitops: introduce BIT() definition
introduce BIT() definition, used in at91_udc gadget
driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
[remove all other occurrences of BIT(x) definition]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
2015-09-11 17:15:32 -04:00
Masahiro Yamada
ff560a1305 ARM: zynq: drop "optional" from board select in favor of ZC702
One disadvantage of commit a26cd04920 (arch: Make board selection
choices optional) is that Kconfig could create such an insane
.config file that no board is selected.

Rip off the "optional" again in favor of ZC702 as the default
target.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:21 +02:00
Simon Glass
30db918768 zynq: Rename struct clk_ops to zynq_clk_ops
Since we want clk_ops to be used in U-Boot as a whole, rename the Zynq
version until it can be converted to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:29 -06:00
Masahiro Yamada
95b237ecbc ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x
Due to licensing issues, the files ps7_init.c/h are not able to be
distributed with U-Boot source code.  Recent Xilinx tools also
provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot
license.

Prior to this commit, we had to copy ps7_init files into
board/xilinx/zynq/ before the compile.

To be more user-friendly, let's include ps7_init_gpl.c/h for
Zedboard, MicroZed, ZC702, ZC706.

These init code have been taken from the hwplatform_templates
directory of Xilinx SDK 2014.4.

You can still use customized ps7_init_gpl.c/h by enabling
CONFIG_ZYNQ_CUSTOM_INIT.  The recommended directory for storing them
is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq
is still supported for backward compatibility.  The latter emits
a warning message to prompt users to gradually switch to the new
directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-25 10:52:36 +02:00
Masahiro Yamada
9bd53b6255 ARM: zynq: add separate configuration for ZC702 and ZC706
Prior to this commit, ZC702 and ZC706 shared the same configuration
and were built as follows:

ZC702: make zynq_zc70x_defconfig && make
ZC706: make zynq_zc70x_defconfig && make DEVICE_TREE=zynq-zc706

This commit introduces separate configuration for them, which makes
the next commit much easier.

Going forward, the recommended build commands are:

ZC702: make zynq_zc702_defconfig && make
ZC706: make zynq_zc706_defconfig && make

Although the old work flow is still supported, CONFIG_TARGET_ZC70X
has been marked as deprecated.  If used, the warning message is
shown to prompt users to switch to the new scheme.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-25 10:52:35 +02:00
Michal Simek
a2ec7fb906 zynq: Use system timer implementation instead of our
Don't use error-prone arch timer code and instead use system
timer implementation to simplify our code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-25 10:52:03 +02:00
Joe Hershberger
a26cd04920 arch: Make board selection choices optional
By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
2015-05-12 18:10:02 -04:00
Masahiro Yamada
5ca269a4df ARM: zynq: rename CONFIG_ZYNQ to CONFIG_ARCH_ZYNQ
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:05 +02:00
Masahiro Yamada
9b9c6516b0 ARM: zynq: move SoC headers to mach-zynq/include/mach
Move arch/arm/include/asm/arch-zynq/*
  -> arch/arm/mach-zynq/include/mach/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:05 +02:00
Masahiro Yamada
0107f24036 ARM: zynq: move SoC sources to mach-zynq
Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:05 +02:00