Commit graph

13 commits

Author SHA1 Message Date
Michal Simek
2e3c10eea0 xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entries
The commit ba74bcf3e0 ("xilinx: common: Remove
zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
because xlnx,eeprom link via DT chosen node is no longer used. But forget
to remove Kconfig entries which are used by this code only.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f97451ed33409838efea4071553b6da795cfc578.1669192026.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Michal Simek
f3538a3cbe xilinx: Add option to select SC id instead of DUT id for SC support
Reading MAC address from on board EEPROM requires different type for System
Controller (SC).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/90bb7cc5463568a690b979f18c8d42556986b46d.1669204122.git.michal.simek@amd.com
2022-12-05 08:55:54 +01:00
Michal Simek
f6aebdf676 arm64: versal-net: Add support for Versal NET platform
Versal NET platform is based on Versal chip which is reusing a lot of IPs.
For more information about new IPs please take a look at DT which describe
currently supported devices.
The patch is adding architecture and board support with soc detection
algorithm. Generic setting should be very similar to Versal but it will
likely diverge in longer run.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-26 14:23:29 +02:00
Ovidiu Panait
bb113ce313 xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze
The xilinx board_fdt_blob_setup() implementation makes use of
XILINX_OF_BOARD_DTB_ADDR, but no default value is currently defined for
microblaze. Add one so that microblaze could also work with
CONFIG_OF_SEPARATE.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211202195657.246723-1-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05 10:22:03 +01:00
Michal Simek
92dc921063 xilinx: Merge together BOOT_SCRIPT_OFFSET between MB and ARM
There is no reason not to use commong Kconfig by Microblaze too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:33 +01:00
Siva Durga Prasad Paladugu
f1b97b5f18 xilinx: cmd: Add support for FRU commands
This patch adds support for fru commands "fru capture" and "fru display".
The fru capture parses the FRU table present at an address and stores in a
structure for later use. The fru display prints the content of captured
structured in a readable format.

As of now, it supports only common header and board area of FRU. Also, it
supports only English language code and ASCII8/BINARY formats.

fru_data variable is placed to data section because fru parser can be
called very early before bss is initialized. And also information needs to
be shared that's why it is exported via header.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:32 +01:00
Michal Simek
83594f3c01 xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board Kconfig
There is no reason to have ZYNQ specific Kconfig macro in generic location
to be visible for all other SoCs. That's why move it to Xilinx common
location to be visible only for us.
Also introduce new bool entry ZYNQ_MAC_IN_EEPROM to have also an option to
disable it or enable. This has connection to code which is reading the
whole content of i2c and also work with the rest of date not just with MAC
address.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:32 +01:00
Michal Simek
1a005b4ae4 board: xilinx: Enable changing default DTB pick up address
U-Boot on xilinx boards is checking one address where DTB can be placed as
the first location for DTB. Originally this code was developed for Versal
where QEMU was putting generated DTB for U-Boot to use.
The patch enables changing this address which is necessary for cases where
default address is pointing to location (DDR) which is not present. The
access to this location can cause exception.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23 10:31:40 +02:00
Michal Simek
fc274a5932 arm64: zynqmp: Add support for OF_SEPARATE with board DTB
OF_BOARD and OF_SEPARATE can use board specific board_fdt_blob_setup().

OF_BOARD option is mostly used for picking up DTB from certain location.

OF_SEPARATE option is used when DTB is appended after u-boot binary.

This board specific function is aligned with current version in
lib/fdtdec.c with checking CONFIG_XILINX_OF_BOARD_DTB_ADDR address first.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:53 +01:00
T Karthik Reddy
53c69dec33 board: xilinx: Add support for user configurable boot script offset
Currently "script_offset_f" env variable is hardcoded, this variable
specifies from which offset of the flash boot.scr should be read/write.
As flashes are of different sizes having a fixed offset makes it
difficult to load other images into the flash which may overwrite the
boot script or cannot utilize the full memory. This current fix
creates a new config "CONFIG_BOOT_SCRIPT_OFFSET" which holds the
offset address, overwrites the "script_offset_f" variable.
Also removed existing variable with default values, as the default
values are held by CONFIG_BOOT_SCRIPT_OFFSET

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:52 +01:00
Ibai Erkiaga
f4e7e61193 arm64: xilinx: Enable generic of_board_dtb
Modify the configuration naming to be generic to xilinx rather than
specific to Versal. The offset value is different for Zynq and ZynqMP
to avoid overlapping with FSBL.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 13:14:54 +02:00
Ibai Erkiaga
fec657bebd arm64: versal: Move common board dtb search
Move the exisiting function of getting board dtb from versal to a common
Xilinx folder.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 13:14:54 +02:00
Luca Ceresoli
6da4f67ad0 arm/arm64: zynq/zynqmp: pass the PS init file as a kconfig variable
U-Boot needs to link ps7_init_gpl.c on Zynq or psu_init_gpl.c on
ZynqMP (PS init for short). The current logic to locate this file for
both platforms is:

 1. if a board-specific file exists in
    board/xilinx/zynq[mp]/$(CONFIG_DEFAULT_DEVICE_TREE)/ps?_init_gpl.c
    then use it
 2. otherwise use board/xilinx/zynq/ps?_init_gpl.c

In the latter case the file does not exist in the U-Boot sources and
must be copied in the source tree from the outside before starting the
build. This is typical when it is generated from Xilinx tools while
developing a custom hardware. However making sure that a
board-specific file is _not_ found (and used) requires some trickery
such as removing or overwriting all PS init files (e.g.: the current
meta-xilinx yocto layer).

This generates a few problems:

 * if the source tree is shared among different out-of-tree builds,
   they will pollute (and potentially corrupt) each other
 * the source tree cannot be read-only
 * any buildsystem must add a command to copy the PS init file binary
 * overwriting or deleting files in the source tree is ugly as hell

Simplify usage by allowing to pass the path to the desired PS init
file in kconfig variable XILINX_PS_INIT_FILE. It can be an absolute
path or relative to $(srctree). If the variable is set, the
user-specified file will always be used without being copied
around. If the the variable is left empty, for backward compatibility
fall back to the old behaviour.

Since the issue is the same for Zynq and ZynqMP, add one kconfig
variable in a common place and use it for both.

Also use the new kconfig help text to document all the ways to give
U-Boot the PS init file.

Build-tested with all combinations of:
 - platform: zynq or zynqmp
 - PS init file: from XILINX_PS_INIT_FILE (absolute, relative path,
   non-existing), in-tree board-specific, in board/xilinx/zynq[mp]/
 - building in-tree, in subdir, in other directory

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:53 +02:00