Commit graph

1426 commits

Author SHA1 Message Date
Rick Chen
42ac26f2b0 riscv: tools: Prelink u-boot
Add prelink-riscv to arrange .rela.dyn and .rela.got
in compile time. So that u-boot can be directly
executed without fixup.

Signed-off-by: Chih-Mao Chen <cmchen@andestech.com>
Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
2018-01-12 08:05:12 -05:00
Konstantin Porotchkin
eee4835d22 tools: Add Marvell recovery image download script
Introduce the recovery image download script for usage with
Marvell Armada SoC families (excepting 37xx family).
Since Marvell BootROM uses a sliding window in UART buffer
for detecting escape sequence during the boot, it's easier
to interrupt the normal boot flow by sending a long stream
of chained escape sequences to the serial port instead of
periodically sending a single escape sequence as it is done
by kwboot utility.
Additional benefit of using this script is the ability to
adjust the escape sequence stream length withoiut need for
compilation.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Tom Rini
90d75d2efc Xilinx changes for v2018.01-rc2-v2
fpga:
 - Enable loading bitstream via fit image for !xilinx platforms
 
 zynq:
 - Fix SPL SD boot mode
 
 zynqmp:
 - Not not reset in panic
 - Do not use simple allocator because of fat changes
 - Various dt chagnes
 - modeboot variable setup
 - Fix fpga loading on automotive devices
 - Fix coverity issues
 
 test:
 - Fix env test for !hush case - Stephen's patch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlo3tMgACgkQykllyylKDCFQvQCfeFgaC/95gx9orLrHxpDx7s46
 wwYAmwSoXn6hc9bEzgKIppQHblzfqGU6
 =mscK
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx platforms

zynq:
- Fix SPL SD boot mode

zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues

test:
- Fix env test for !hush case - Stephen's patch
2017-12-18 12:23:27 -05:00
Michal Simek
6d0cbbd596 tools: zynqmpimage: Check return values from file functions
Check all return values from file functions.
In case of negative return exit immediately.
Also change fsize return value which can't be negative.

Reported-by: Coverity (CID: 23276, 23304, 169357)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-18 09:32:06 +01:00
Simon Glass
39c1502ccc binman: Add documentation for the symbol feature
Add this feature to the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-12-12 19:53:45 -07:00
Simon Glass
1979063264 binman: Support accessing binman tables at run time
Binman construct images consisting of multiple binary files. These files
sometimes need to know (at run timme) where their peers are located. For
example, SPL may want to know where U-Boot is located in the image, so
that it can jump to U-Boot correctly on boot.

In general the positions where the binaries end up after binman has
finished packing them cannot be known at compile time. One reason for
this is that binman does not know the size of the binaries until
everything is compiled, linked and converted to binaries with objcopy.

To make this work, we add a feature to binman which checks each binary
for symbol names starting with '_binman'. These are then decoded to figure
out which entry and property they refer to. Then binman writes the value
of this symbol into the appropriate binary. With this, the symbol will
have the correct value at run time.

Macros are used to make this easier to use. As an example, this declares
a symbol that will access the 'u-boot-spl' entry to find the 'pos' value
(i.e. the position of SPL in the image):

   binman_sym_declare(unsigned long, u_boot_spl, pos);

This converts to a symbol called '_binman_u_boot_spl_prop_pos' in any
binary that includes it. Binman then updates the value in that binary,
ensuring that it can be accessed at runtime with:

   ulong u_boot_pos = binman_sym(ulong, u_boot_spl, pos);

This assigns the variable u_boot_pos to the position of SPL in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
7fe9173be7 binman: Support enabling debug in tests
The elf module can provide some debugging information to assist with
figuring out what is going wrong. This is also useful in tests. Update the
-D option so that it is passed through to tests as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
f689890d8e binman: Adjust size of test SPL binary
This is only 3 bytes long which is not enough to hold two symbol values,
needed to test the binman symbols feature. Increase it to 15 bytes.

Using very small regions is useful since we can easily compare them in
tests and errors are fairly easy to diagnose.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
5cfcf7e0fd binman: Add tests binaries with binman symbols
For testing we need to build some ELF files containing binman symbols. Add
these to the Makefile and check in the binaries:

   u_boot_binman_syms - normal, valid ELF file
   u_boot_binman_syms_bad - missing the __image_copy_start symbol
   u_boot_binman_syms_size - has a binman symbol with an invalid size

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
00ae40b3ae binman: Drop a stale comment about the 'board' feature
This feature is now supported. Drop the incorrect comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
4e6fdbef67 binman: Add support for including spl/u-boot-spl-nodtb.bin
This file contains SPL image without a device tree. Add support for
including this in images.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
47419eae4b binman: Add support for including spl/u-boot-spl.dtb
This file contains the SPL device tree. Add support for including this by
itself in images.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Simon Glass
b50e5611a6 binman: Add a function to read ELF symbols
In some cases we need to read symbols from U-Boot. At present we have a
a few cases which does this via 'nm' and 'grep'.

It is better to use objdump since that tells us the size of the symbols
and also whether it is weak or not.

Add a new module which reads ELF information from files. Update existing
uses of 'nm' to use this module.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Philipp Tomsich
c8e1ca3ebf tools: omapimage: fix corner-case in byteswap path
Since commit 2614a20847 ("common: command: tempory buffer should
have size of command line buf"), there have been consistent Travis CI
failures on my builds (interestingly not for Tom, even though building
the same commit id) due to a SEGV in building the byteswapped
omapimage:
     	    arm: pcm051_rev3
     make[2]: *** [MLO.byteswap] Error 139
     	      	  		       ^^^ error code for a SEGV

Turns out that the word-based byte-swapping loop in omapimage.c is to
blame. With the loop condition
       while (swapped <= (sbuf->st_size / sizeof(uint32_t)))
there had been one-too-many iterations for all file sizes divisible by
the sizeof(uint32_t).  I.e. we had 1 iteration for 0 bytes (and also 1
through 3 bytes) and 2 iterations at 4 bytes... clearly overshooting
on 0 and 4 bytes.

This commit fixes the calculation of an up-rounded word-count and
makes sure to keep the zero-based loop-counter below the number of
words to be processed.

References: 2614a20 ("common: command: tempory buffer should have size of command line buf")
Fixes: 79b9ebb ("omapimage: Add support for byteswapped SPI images")
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
2017-12-05 21:56:29 -05:00
Masahiro Yamada
26e961c8cf libfdt: migrate fdt_wip.c to a wrapper of scripts/dtc/libfdt/fdt_wip.c
Now, lib/libfdt/fdt_wip.c is the same as scripts/dtc/libfdt/fdt_wip.c

Change the former to a wrapper of the latter.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04 09:59:02 -05:00
S. Lockwood-Childs
34255b92e6 tools: env: Add support for direct read/write UBI volumes
Up to now we were able to read/write environment data from/to UBI
volumes only indirectly by gluebi driver. This driver creates NAND MTD
on top of UBI volumes, which is quite a workaroung for this use case.

Add support for direct read/write UBI volumes in order to not use
obsolete gluebi driver.

Forward-ported from this patch:
http://patchwork.ozlabs.org/patch/619305/

Original patch:
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>

Forward port:
Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com>
2017-11-29 22:30:50 -05:00
Jean-Francois Dagenais
df4950e302 tools: zynqmpimage: adjust ug1085 reference to v1.4 of the document
The chapter in which the table explaining the image format changed
chapter as the document evolved. This should help people track the
info down faster.

Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-29 08:02:40 +01:00
Michal Simek
c85a6b79d1 tools: mkimage: Extend mkimage to also include pmufw
The patch is adding external pmufw "Platform Management Unit firmware"
to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable
to read and boot the system. pmufw is copied to the header data section
follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze)
and SPL runs on a53-0.

This is generated command line when PMUFW_INIT_FILE is setup.

./tools/mkimage -T zynqmpimage -R ./"" -n
./"board/xilinx/zynqmp/pmufw.bin" -d spl/u-boot-spl.bin spl/boot.bin

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-28 16:08:57 +01:00
Tom Rini
bb7ab1ccfe Merge git://git.denx.de/u-boot-dm 2017-11-23 22:48:35 -05:00
Simon Glass
9677faa34e binman: Return non-zero exit code on test failure
Return exit code 1 when test fail so that callers can detect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
ca4f4ff7cf binman: Add add test for using an Intel MRC binary
MRC (Memory Reference Code) is a binary blob used to set up the SDRAM
controller on some Intel boards. Add a test for this feature.

With this test coverage on binman is back up to 100%.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
6b187df787 binman: Add add test for SPL with a microcode pointer
Add a test for this feature. It allows SPL to hold a pointer to the
microcode block. This is used for 64-bit U-Boot on x86.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
8772213ea6 binman: Add a test for x86-start16-spl
This allows us to put the 16-bit x86 start-up code in SPL. Add a test for
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
5650984300 binman: Add test for u-boot-spl-bss-pad
Add a test that we can pad the BSS with zero bytes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
a25ebed36f binman: Check for files missing from test coverage
Files that are never imported are not shown in the test-coverage report.
Detect these and show an error.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
a9871c6e7e binman: Increase test coverage back to 100%
Make a minor tweak to fix test coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
9fc60b4975 binman: Add a main program to the tests
Add a main program so that the tests can be executed directly, without
going through the main binman program.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
934cdcfb1b binman: Add tests for importlib availability
Add a test that the 'entry' module works with or without importlib.
The tests are numbered so that they are executed in the correct order.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
4d5994f91c binman: Set up 'entry' to permit full test coverage
There is a little check at the top of entry.py which decides if importlib
is available. At present this has no test coverage. To add this we will
need to import the module twice, once with importlib and once without.
In preparation for allowing a test to control the importing of this
module, remove all global imports of the 'entry' module.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
5a3f222604 binman: Append to PYTHONPATH when running test coverage
Rather that overwrite this, append to it, in case the caller has already
set up the path correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
aab660fe18 dtoc: Fix up tests
The tool has changed slightly since it was originally written. Update the
tests to suit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
251f5867c9 buildman: Fix up tests
The tests were broken by two separate commits which adjusted the output
when boards are listed. Fix this by adding back a PowerPC board and
putting the name of each board in the test.

Fixes: b9f7d881 (powerpc, 5xx: remove some "5xx" remains)
Fixes: 8d7523c5 (buildman: Allow showing the list of boards with -n)

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
cb39a10979 buildman: Allow skipping of tests which use the network
Accessing the network slows down the test and limits the environment in
which it can be run. Add an option to disable network tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
6c328f2975 patman: Fix up tests to pass with newest checkpatch
The checkpatch tool was updated but the patman tests were not. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
d09682ef8c binman: Disable the no-unit_address_vs_reg warnings
These warnings are not useful for binman tests. Disable them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
680e3312c2 binman: Rename tests to ftest
At present these tests use the same filename as patman. This adds
confusion when running all tests, since error messages look very similar.
In fact binman tries to run the wrong tests at present.

Rename the tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
00ebd1f74d binman: Add a Makefile for test-program compilation
These test programs are includedd as binary files in U-Boot to avoid
having to build them (and associated toolchain differences). Instructions
on building are in the files themselves, but it seems better to provide
a Makefile which can be manually run when desired.

Add a Makefile, separate from the normal build system, to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
9c0a8b1f44 binman: Add docs explaining how to enable binman for a board
The process is not obvious. Add a little section to explain how to move a
board to use binman.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
511fd0b2bb binman: Add better Makefile debugging
There is a debugging option in the Makefile to allow people to figure out
which u-boot.dtsi files are used in the build. But is it not easy to use
since it only shows files it finds, not those it is looking for. Update it
and update the mention of it to the docs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Philipp Tomsich
95d363cc30 rockchip: mkimage: remove unused code-paths (spl_boot0 is now implied)
With all targets converted to generate prepadded images, this removes
the spl_boot0 field from our config structure and removes the unused
code-path (for images that are not prepadded): i.e. spl_boot0 is now
implied as 'true' and the code is specialised by removing the other
case.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:23 +01:00
Kever Yang
d962e5dadc rockchip: mkimage: use spl_boot0 for all Rockchip SoCs
Enable the spl_boot0 in SPL and use the pre-padding TAG memory,
the mkimage do not need to pad it but only need to replace the value
with correct TAG value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[Updated:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:21 +01:00
Tom Rini
c6831c74a9 env: Remove CONFIG_ENV_AES support
This support has been deprecated since v2017.09 due to security issues.
We now remove this support.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-21 07:43:31 -05:00
Masahiro Yamada
b38ad663a4 tools: use files from scripts/dtc/libfdt where possible
Prior to this commit, tools/Makefile pulls all libfdt files from
lib/libfdt.

lib/libfdt/ and scripts/dtc/libfdt have the same copies for the
followings 6 files:
  fdt.c fdt_addresses.c fdt_empty_tree.c fdt_overlay.c fdt_strerr.c
  fdt_sw.c

This commit changes them to #include ones from scripts/dtc/libfdt.

Unfortunately, U-Boot locally modified the following 3 files:
  fdt_ro.c fdt_wip.c fdt_rw.c

I did not touch them in order to avoid unpredictable impact.

The fdt_region.c is U-Boot own file.  This is also borrowed from
lib/libfdt/.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17 07:44:13 -05:00
Masahiro Yamada
15b97f5c5e pylibfdt: move pylibfdt to scripts/dtc/pylibfdt and refactor makefile
The pylibfdt is used by dtoc (and, indirectly by binman), but there
is no reason why it must be generated in the tools/ directory.

Recently, U-Boot switched over to the bundled DTC, and the directory
structure under scripts/dtc/ now mirrors the upstream DTC project.
So, scripts/dtc/pylibfdt is the best location.

I also rewrote the Makefile in a cleaner Kbuild style.

The scripts from the upstream have been moved as follows:

  lib/libfdt/pylibfdt/setup.py -> scripts/dtc/pylibfdt/setup.py
  lib/libfdt/pylibfdt/libfdt.i -> scripts/dtc/pylibfdt/libfdt.i_shipped

The .i_shipped is coped to .i during building because the .i must be
located in the objtree when we build it out of tree.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17 07:43:32 -05:00
Jan Kundrát
b95a5190ba Do not attempt to use the systemwide libfdt
U-Boot bundles a patched copy of libfdt, so it's wrong to attempt to
include it <like/this>. This breaks the build for me when I have dtc
fully installed in my host -- as happened earlier tonight with
Buildroot, for example.

There are several other occurrences throughout the code where '<libfdt'
matches. I'm not modifying these because I have no clue why the
<systemwide> include style is being used -- IMHO wrongly.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
2017-11-06 09:59:02 -05:00
Masahiro Yamada
76b9cbab25 tools: image: fix message when fail to add verification data for config
This function is called when signing configuration nodes.  Adjust
the error message.

I do not know why we do not need to show the error message in case of
ENOSPC.  Remove the if-conditional that seems unnecessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06 09:59:01 -05:00
Masahiro Yamada
6793d017a7 tools: image: allow to sign image nodes without -K option
If -K option is missing when you sign image nodes, it fails with
an unclear error message:

  tools/mkimage Can't add hashes to FIT blob: -1

It is hard to figure out the cause of the failure.

In contrast, when you sign configuration nodes, -K is optional because
fit_config_process_sig() returns successfully if keydest is unset.
Probably this is a preferred behavior when you want to update FIT with
the same key; you do not have to update the public key in this case.

So, this commit changes fit_image_process_sig() to continue signing
without keydest.  If ->add_verify_data() fails, show a clearer error
message, which has been borrowed from fit_config_process_sig().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06 09:59:00 -05:00
Masahiro Yamada
1d88a99d1b tools: image: fix "algo" property of public key for verified boot
The "algo_name" points to a property in a blob being edited.  The
pointer becomes stale when fit_image_write_sig() inserts signatures.
Then crypto->add_verify_data() writes wrong data to the public key
destination.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06 09:59:00 -05:00
Stefan Agner
84d46e7e89 tools: env: allow to print U-Boot version
The fw_env utility family has a default environment compiled in
which ties it quite strongly to the U-Boot source/config it has
been built with. Allow to display the U-Boot version it has been
built with using the -v/--version argument.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-06 09:58:59 -05:00
Masahiro Yamada
16067e6b87 tools: image: fix node name of signature node in FIT
Both "conf_name" and "sig_name" point to the name of config node.
The latter should be the name of the signature node.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-23 17:28:17 -04:00