Commit graph

18 commits

Author SHA1 Message Date
Andreas Bießmann
09c2e90c11 unify version_string
This patch removes the architecture specific implementation of
version_string where possible. Some architectures use a special place
and therefore we provide U_BOOT_VERSION_STRING definition and a common
weak symbol version_string.

Signed-off-by: Andreas Biemann <andreas.devel@googlemail.com>
CC: Mike Frysinger <vapier@gentoo.org>
CC: Peter Pan <pppeterpppan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28 17:22:53 +02:00
Wolfgang Denk
8c4734e9af Revert "PowerPC: Add support for -msingle-pic-base"
This reverts commit 39768f7715.

Reson: it breaks a number of boards with embedded environment as the
code size grows in some places.
2011-04-20 22:11:21 +02:00
Joakim Tjernlund
39768f7715 PowerPC: Add support for -msingle-pic-base
-msingle-pic-base is a new gcc option for ppc and
it reduces the size of my u-boot with 6-8 KB.
While at it, add -fno-jump-tables too to save a
few more bytes.

-msingle-pic-base will be in gcc 4.6, however
backported patches are available at
http://bugs.gentoo.org/show_bug.cgi?id=347281

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2011-04-11 21:38:47 +02:00
Po-Yu Chuang
44c6e6591c rename _end to __bss_end__
Currently, _end is used for end of BSS section.  We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2011-03-27 19:18:37 +02:00
Ricardo Ribalda Delgado
d20b999115 xilinx-ppc4xx-generic: Use common u-boot.lds
Use common ppc4xx linker script for xilinx ppc440 and ppc405 related boards.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:44:40 +01:00
Stefan Roese
f7b548adb5 ppc4xx: Clarify comment about boot chip-select in start.S
Ths old comment was quite screwed up. Replace it with a new version
that should be a bit more descriptive.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:43:36 +01:00
Stefan Roese
7920954bd2 ppc4xx: Flush complete dcache in relocate_code()
When the cache is enabled in SDRAM we need to flush not only the global
data area but also the bd_info struct in relocate_code. This patch now
flushed the complete dcache (all dcache lines) via flush_dcache() instead
of adding a flush_dcache_range() call for bd_info since this is faster.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-11-28 11:07:37 +01:00
Joakim Tjernlund
34bbf61860 PowerPC: Don't destroy fixup table while doing fixups
The fixup procedure just stored a constant value in the
fixup table rather than just adjusting the table.
Although that doesn't seem to do any harm, it prevents
relocation more that once.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-11-14 23:25:33 +01:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Wolfgang Denk
553f09823c Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE
CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
some end address; to make the meaning more clear we rename it into
CONFIG_SYS_INIT_RAM_SIZE

No other code changes are performed in this patch, only minor editing
of white space (due to the changed length) and the comments was done,
where noticed.

Note that the code for the PATI and cmi_mpc5xx board configurations
looks seriously broken.  Last known maintainers on Cc:

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Denis Peter <d.peter@mpl.ch>
Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:03:25 +02:00
Joakim Tjernlund
d1e0b10acc powerpc: do not fixup NULL ptrs
The fixup routine must not fixup NULL pointers.
Problem can be seen by
 char *testfun(void) __attribute__((weak));
 char *(*myfun)(void) = testfun;

Then add
  printf("myfun:%p, &myfun:%p\n", myfun, &myfun);
before relocation and after relocation.
myfun should be NULL in both cases but it is not.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-10-18 22:39:37 +02:00
Peter Tyser
52ebd9c1e5 powerpc: Remove warm reset entry point
No boards utilize the warm reset entry point, so remove it.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-12 23:01:32 +02:00
Tirumala Marri
1b8fec1393 APM821xx: Add CPU support
APM821XX is a new line of SoCs which are derivatives of
PPC44X family of processors. This patch adds support of CPU, cache,
tlb, 32k ocm, bootstraps, PLB and AHB bus.

Signed-off-by: Tirumala R Marri <tmarri@apm.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-04 11:15:02 +02:00
Victor Gallardo
ad876fff34 ppc4xx: Disable trace broadcast for 44x non debug mode
By default the trace broadcast is enabled on 44x systems.

To reduce power consumption when instruction tracing is
not needed, disable trace broadcast.

Check External Debug Mode (EDM) bit to detect if it should be
disabled or not.

Resetting system via a debugger will set the DBCR0[EDM] bit.
Resetting via u-boot or OS will not.

Signed-off-by: Victor Gallardo <vgallardo@apm.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:06 +02:00
Stefan Roese
b36df56115 ppc4xx: Move ppc4xx headers to powerpc include directory
This patch moves some ppc4xx related headers from the common include
directory (include/) to the powerpc specific one
(arch/powerpc/include/asm/). This way to common include directory is not
so cluttered with files.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:05 +02:00
Stefan Roese
f3cac53840 ppc4xx: Invalidate d-cache when used as init-ram
We need to invalidate the data cache after it has been used as init-ram.

This problem was detected on the lwmon5 update.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-03 11:14:26 +02:00
Stefan Roese
4978e60584 ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460
Background Info:
Some PPC440/460 boards have caches enabled in the Boot/FLASH TLB (via
init.S) to speed up the boot process. In relocate_code (start.S) the
cache inhibit attribute for this TLB is set to disable cache. This is
needed for the CFI FLASH driver.

This patch now cleans this code up:
- CONFIG_SYS_TLB_FOR_BOOT_FLASH is defined to 0 (default TLB) if not
  defined in the top of this file. This way, we can remove an ugly
  #ifdef in this code.
- Replace complex "#if defined(CONFIG_440EP) || defined(CONFIG_GR)..."
  statement with "#if defined(CONFIG_440)".
- Remove unnecessary cache invalidate calls resulting in faster bootup.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:25 +02:00
Stefan Roese
a47a12becf Move arch/ppc to arch/powerpc
As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>
2010-04-21 23:42:38 +02:00
Renamed from arch/ppc/cpu/ppc4xx/start.S (Browse further)