Commit graph

629 commits

Author SHA1 Message Date
Stephen Warren
d5aee659f2 fs: ext4: cache extent data
When a file contains extents, U-Boot currently reads extent-related data
for each block in the file, even if that data is located in the same
block each time. This significantly slows down loading of files that use
extents. Implement a very dumb cache to prevent repeatedly reading the
same block. Files with extents now load as fast as files without.

Note: There are many cases where read_allocated_block() is called. This
patch only addresses one of those places; all others still read redundant
data in any case they did before. This is a minimal patch to fix the
load command; other cases aren't fixed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-04-09 15:34:15 -04:00
Eran Matityahu
734b080e78 mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit
Before printk.h was introduced and MTDDEBUG was removed,
pr_crit() was calling MTDDEBUG(), which was since then
replaced by the current pr_debug().

pr_debug is more appropriate here.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09 07:46:42 +02:00
Sébastien Szymanski
2e7365518a fs: ext4: do not write on filesystem with metadata_csum feature
U-Boot doesn't support metadata_csum feature. Writing to filesystem with
metadata_csum feature makes the filesystem corrupted and unbootable by
Linux:

[    2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0)
[    2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0)
...
[    2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0)
[    2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0)
[    2.687920] JBD2: journal checksum error
[    2.691982] EXT4-fs (mmcblk0p2): error loading journal
[    2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74

Don't write to filesystem with meatadata_csum feature to not corrupt the
filesystem.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-03-22 12:15:24 -04:00
Heinrich Schuchardt
7274b7638a fs: fat: fix link error when building with DEBUG=1
When compiling with DEBUG=1 an error
fs/fat/fat_write.c:831: undefined reference to `__aeabi_ldivmod'
occurred.

We should use do_div() instead of the modulus operator.

filesize and cur_pos cannot be negative. So let's use u64 to avoid
warnings.

Fixes: cb8af8af5b ("fs: fat: support write with non-zero offset")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-28 14:21:46 -05:00
Tien Fong Chee
e48485f5e4 fs: fat: Reduce default max clustersize 64KiB from malloc pool
Release cluster block immediately when no longer use would help to reduce
64KiB memory allocated to the memory pool.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19 08:55:43 -05:00
Tien Fong Chee
8537874a65 fs: fat: dynamically allocate memory for temporary buffer
Drop the statically allocated get_contents_vfatname_block and
dynamically allocate a buffer only if required. This saves
64KiB of memory.

Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19 08:55:43 -05:00
Marek Vasut
e531c6731b fs: ext4: Unmount FS in do_fs_type()
Unlike other generic FS accessors, fs_get_info() does not call fs_close()
at the end of it's operation. Thus, using fs_get_info() in do_fs_type()
without calling fs_close() causes potential memory leak by creating new
filesystem structures on each call of do_fs_type().

The test case to trigger this problem is as follows. It is required to
have ext4 filesystem on the first partition of the SDMMC device, since
ext4 requires stateful mount and causes memory allocation.
=> while true ; do mmc rescan ; fstype mmc 1 ; done
Eventually, the mounting of ext4 will fail due to malloc failures
and the filesystem will not be correctly detected.

This patch fixes the problem by adding the missing fs_close().

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2019-02-09 11:08:40 +01:00
Simon Goldschmidt
9cc2323fee lmb: handle more than one DRAM BANK
This fixes the automatic lmb initialization and reservation for boards
with more than one DRAM bank.

This fixes the CVE-2018-18439 and -18440 fixes that only allowed to load
files into the firs DRAM bank from fs and via tftp.

Found-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-02 08:19:17 -05:00
Tien Fong Chee
cafc429fa8 spl: fat/fs: Add control to build FS EXT4 in SPL
CONFIG_SPL_FS_EXT4 can be used to include/exclude the FS EXT4 from
SPL build. Excluding the FS EXT4 from SPL build can help to save 20KiB
memory.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
f4b4092474 spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both
obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be
used to control the build in both SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
d8c3ea9982 spl: fat/fs: Add option to include/exclude FAT write build in SPL
Most of the time SPL only needs very simple FAT reading, so having
CONFIG_IS_ENABLED(FAT_WRITE) to exclude it from SPL build would help
to save 64KiB default max clustersize from memory.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Tien Fong Chee
0c3a9ed409 spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Simon Goldschmidt
aa3c609e2b fs: prevent overwriting reserved memory
This fixes CVE-2018-18440 ("insufficient boundary checks in filesystem
image load") by using lmb to check the load size of a file against
reserved memory addresses.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16 16:37:05 -05:00
Tom Rini
d3035b8560 Revert "fs: fat: assign rootdir sector when accessing root directory"
This particular commit is causing a regression on stih410-b2260 and
other platforms when reading from FAT16.  Noting that I had rebased the
original fix from Thomas onto then-current master, there is also
question from Akashi-san if the change is still needed after other FAT
fixes that have gone in.

This reverts commit a68b0e11ea.

Reported-by: Patrice Chotard <patrice.chotard@st.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-11 10:15:42 -05:00
Bin Meng
d94bf13c85 fs: cbfs: Fix out of bound access during CBFS walking through
The call to file_cbfs_fill_cache() is given with the parameter
'start' pointing to the offset by the CBFS base address, but
with the parameter 'size' that equals to the whole CBFS size.
During CBFS walking through, it checks files one by one and
after it pass over the end of the CBFS which is 4GiB boundary
it tries to check files from address 0 and so on, until the
overall size the codes checked hits to the given 'size'.

Fix this by passing 'start' pointing to the CBFS base address.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-31 09:42:41 +08:00
Christian Gmeiner
9914c73261 fs: cbfs: remove wrong header validation
cbfs_fileheader.len indicates the content size of the file in the
cbfs, and it has nothing to do with cbfs_fileheader.offset which
is the starting address of the file in the cbfs.

Remove such check in file_cbfs_next_file(). Before this change
'cbfsinit' failed with 'Bad CBFS file'. After this change all cbfs
commands are working as expected.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
[bmeng: keep the necessary header sanity check]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-31 09:42:41 +08:00
Patrick Wildt
8b021bb956 fs: fix FAT name extraction
The long name apparently can be accumulated using multiple
13-byte slots.  Unfortunately we never checked how many we
can actually fit in the buffer we are reading to.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2018-12-06 23:26:31 -05:00
Patrick Wildt
cd80a4fe61 fs: check FAT cluster size
The cluster size specifies how many sectors make up a cluster.  A
cluster size of zero makes no sense, as it would mean that the
cluster is made up of no sectors.  This will later lead into a
division by zero in sect_to_clust(), so better take care of that
early.

The MAX_CLUSTSIZE define can reduced using a define to make some
room in low-memory system.  Unfortunately if the code reads a
filesystem with a bigger cluster size it will overflow the buffer.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2018-12-06 23:26:31 -05:00
AKASHI Takahiro
b0c78d8ffc fs: update fs_dev_part in fs_set_blk_dev_with_part()
As in the case of fs_set_blk_dev(), fs_set_blk_dev_with_part() should
maintain and update fs_dev_part whenever called.

Without this patch, a problem will come up when an efi binary associated
with efi's BOOTxxxx variable is invoked via "bootefi bootmgr".

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Thomas RIENOESSL
a68b0e11ea fs: fat: assign rootdir sector when accessing root directory
This fixes problems accessing drives formated under
Windows as FAT16.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
[trini: Rebase on top of f528c140c8]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-20 12:35:35 -05:00
Keerthy
48e2f0c966 fs: Makefile: Add fs.c under SPL for fs_loader
Add fs.c under SPL as well as it is needed for fs_loader

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add as obj-$(CONFIG_FS_LOADER) for non-SPL_FRAMEWORK builds]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16 16:52:00 -05:00
Paul Davey
e4aa10ba57 fs: ubifs: Fix UBIFS decompression on 64 bit
Add local size_t variable to crypto_comp_decompress as intermediate
storage for destination length to avoid memory corruption and incorrect
results on 64 bit targets.

This is what linux does for the various lz compression implementations.

Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
2018-11-07 08:49:27 +01:00
Tom Rini
819c80f528 fs: fat: Fix warning in normalize_longname()
As observed with clang:
fs/fat/fat_write.c:1024:13: warning: comparison of constant 128
      with expression of type 'char' is always false
      [-Wtautological-constant-out-of-range-compare]
                if ((0x80 <= c) && (c <= 0xff))
                     ~~~~ ^  ~
fs/fat/fat_write.c:1024:25: warning: comparison of constant 255
      with expression of type 'char' is always true
      [-Wtautological-constant-out-of-range-compare]
                if ((0x80 <= c) && (c <= 0xff))
                                    ~ ^  ~~~~

Fixes: 25bb9dab14 ("fs: fat: check and normalize file name")
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16 16:44:12 +02:00
Yevgeny Popovych
5b781cf08d fs: btrfs: Fix tree traversal with btrfs_next_slot()
When traversing slots in a btree (via btrfs_path) with btrfs_next_slot(),
we didn't correctly identify that the last slot in the leaf was reached
and we should jump to the next leaf.

This could lead to any kind of runtime errors or corruptions, like:
* file data not being read at all, or is read partially
* file is read but is corrupted
* (any) metadata being corrupted or not read at all, etc

The easiest way to reproduce this is to read a large enough file that
its EXTENT_DATA items don't fit into a single leaf.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
2018-10-08 14:45:02 -04:00
Heinrich Schuchardt
f105fe7bc5 fs: fat: fix set_cluster()
Avoid CoverityScan warning SIGN_EXTENSION by changing the type of
parameter size of set_cluster().

Avoid leaking stack content when writing an incomplete last sector.

Reported-by: Coverity (CID: 184096)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Heinrich Schuchardt
0d532e911c fs: fat: memory leak in fat_unlink()
Do not leak filename_copy in case of error.
Catch out of memory when calling strdup.

Reported-by: Coverity (CID: 184086)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Marek Vasut
c9795396ed fs: btrfs: Fix cache alignment bugs
The btrfs implementation passes cache-unaligned buffers into the
block layer, which triggers cache alignment problems down in the
block device drivers. Align the buffers to prevent this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Behun <marek.behun@nic.cz>
2018-09-30 13:00:37 -04:00
Heinrich Schuchardt
1c381cebb7 fs: fat: unaligned buffers are not an error
The FAT driver supports unaligned reads and writes and EFI applications
will make use of these. So a misaligned buffer is only worth a debug
message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
f8240ce95d fs: fat: support unlink
In this patch, unlink support is added to FAT file system.
A directory can be deleted only if it is empty.

In this implementation, only a directory entry for a short file name
will be removed. So entries for a long file name can and should be
reclaimed with fsck.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
e2519daf5c fs: add unlink interface
"unlink" interface is added to file operations.
This is a preparatory change as unlink support for FAT file system
will be added in next patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
31a18d570d fs: fat: support mkdir
In this patch, mkdir support is added to FAT file system.
A newly created directory contains only "." and ".." entries.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
3a10e07234 fs: fat: remember the starting cluster number of directory
The starting cluster number of directory is needed to initialize ".."
(parent directory) entry when creating a new directory.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
e7074cffb8 fs: add mkdir interface
"mkdir" interface is added to file operations.
This is a preparatory change as mkdir support for FAT file system
will be added in next patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
cb8af8af5b fs: fat: support write with non-zero offset
In this patch, all the necessary code for allowing for a file offset
at write is implemented. What plays a major roll here is get_set_cluster(),
which, in contrast to its counterpart, set_cluster(), only operates on
already-allocated clusters, overwriting with data.

So, with a file offset specified, set_contents() seeks and writes data
with set_get_cluster() until the end of a file, and, once it reaches
there, continues writing with set_cluster() for the rest.

Please note that a file will be trimmed as a result of write operation if
write ends before reaching file's end. This is an intended behavior
in order to maintain compatibility with the current interface.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
704df6aa0a fs: fat: refactor write interface for a file offset
The current write implementation is quite simple: remove existing clusters
and then allocating new ones and filling them with data. This, inevitably,
enforces always writing from the beginning of a file.

As the first step to lift this restriction, fat_file_write() and
set_contents() are modified to accept an additional parameter, file offset
and further re-factored so that, in the next patch, all the necessary code
will be put into set_contents().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
4ced2039dc fs: fat: support write with sub-directory path
In this patch, write implementation is overhauled and rewritten by
making full use of directory iterator. The obvious bonus is that we are
now able to write to a file with a directory path, like /A/B/C/FILE.

Please note that, as there is no notion of "current directory" on u-boot,
a file name specified must contain an absolute directory path. Otherwise,
"/" (root directory) is assumed.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f1149cea16 fs: fat: write returns error code instead of -1
It would be good that FAT write function return error code instead of
just returning -1 as fat_read_file() does.
This patch attempts to address this issue although it is 'best effort
(or estimate)' for now.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
25bb9dab14 fs: fat: check and normalize file name
FAT file system's long file name support is a bit complicated and has some
restrictions on its naming. We should be careful about it especially for
write as it may easily end up with wrong file system.

normalize_longname() check for the rules and normalize a file name
if necessary. Please note, however, that this function is yet to be
extended to fully comply with the standard.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
881042ef02 Revert "fs: fat: cannot write to subdirectories"
This reverts commit 0dc1bfb730.
The succeeding patch series will supersede it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f528c140c8 fs: fat: assure iterator's ->dent belongs to ->clust
In my attempt to re-work write operation, it was revealed that iterator's
"clust" does not always point to a cluster to which a current directory
entry ("dent") belongs.
This patch assures that it is always true by adding "next_clust" which is
used solely for dereferencing a cluster chain.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
b94b6be543 fs: fat: handle "." and ".." of root dir correctly with fat_itr_resolve()
FAT's root directory does not have "." nor ".."
So care must be taken when scanning root directory with fat_itr_resolve().
Without this patch, any file path starting with "." or ".." will not be
resolved at all.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f23101f951 fs: fat: extend get_fs_info() for write use
get_fs_info() was introduced in major re-work of read operation by Rob.
We want to reuse this function in write operation by extending it with
additional members in fsdata structure.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Stefan Roese
7236e24bc4 fs: ubifs: Add missing newlines in super.c
I just stumbled over some cluttered UBIFS messages. It seems some
newline chars are missing in the current U-Boot UBI source.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2018-09-14 06:31:54 +02:00
Masahiro Yamada
dee37fc99d Remove <inttypes.h> includes and PRI* usages in printf() entirely
In int-ll64.h, we always use the following typedefs:

  typedef unsigned int         u32;
  typedef unsigned long        uintptr_t;
  typedef unsigned long long   u64;

This does not need to match to the compiler's <inttypes.h>.
Do not include it.

The use of PRI* makes the code super-ugly.  You can simply use
"l" for printing uintptr_t, "ll" for u64, and no modifier for u32.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10 20:48:17 -04:00
Andreas Dannenberg
287c04e11a fs/fat: debug-print file read position during file_fat_read_at()
In order to make the debug print in file_fat_read_at() a tad more useful,
show the offset the file is being read at alongside the filename.

Suggested-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-20 07:21:28 -04:00
Heinrich Schuchardt
ca230b094e fs: fix typo 'dumm'
%s/dumm /dummy /

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-13 14:03:52 -04:00
Heinrich Schuchardt
0dc1bfb730 fs: fat: cannot write to subdirectories
fs_fat_write() is not able to write to subdirectories.

Currently if a filepath with a leading slash is passed, the slash is
treated as part of the filename to be created in the root directory.

Strip leading (back-)slashes.

Check that the remaining filename does not contain any illegal characters
(<>:"/\|?*). This way we will throw an error when trying to write to a
subdirectory.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:59:44 +02:00
Marek Behún
f8c173b6a0 fs: btrfs: Fix wrong comparison in logical to physical mapping
The comparison
  logical > item->logical + item->length
in btrfs_map_logical_to_physical is wrong and should be instead
  logical >= item->logical + item->length
For example, if
  item->logical = 4096
  item->length = 4096
and we are looking for logical = 8192, it is not part of item (item is
[4096, 8191]). But the comparison is false and we think we have found
the correct item, although we should be searing in the right subtree.

This fixes some bugs I encountered.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-07-20 15:37:44 -04:00
Christophe Kerello
5a08cfee39 ubifs: remove useless code
By checking ubifs source code, s_instances parameter is not
used anymore. So, set this parameter and the associated source
code under __UBOOT__ compilation.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-12 07:27:34 +02:00
Yevgeny Popovych
d146a7b9c6 fs: btrfs: Do not fail when all root_backups are empty
This is the case when reading freshly created filesystem.
The error message is like the following:
    btrfs_read_superblock: No valid root_backup found!

Since the data from super_roots/root_backups is not actually used -
decided to rework btrfs_newest_root_backup() into
btrfs_check_super_roots() that will only check if super_roots
array is valid and correctly handle empty scenario.

As a result:
* btrfs_read_superblock() now only checks if super_roots array is valid;
  the case when it is empty is considered OK.
* removed root_backup pointer from btrfs_info,
  which would be NULL in case of empty super_roots.
* btrfs_read_superblock() verifies number of devices from the superblock
  itself, not newest root_backup.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Sergey Struzh <sergeys@pointgrab.com>
2018-06-18 14:43:12 -04:00
Alexey Brodkin
f8c987f8f1 lib: Add hexdump
Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.

This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------

which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35  ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e  200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30  sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00  0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00  bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39  fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72  ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65  =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32  rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c  000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75  0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30  t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  00..............
...
------------------->8----------------

Source of hexdump.c was copied from Linux kernel v4.7-rc2.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefan Roese <sr@denx.de>
2018-06-13 07:49:12 -04:00
Yevgeny Popovych
f559180176 fs: btrfs: Fix not all CHUNK_ITEMs being read from CHUNK_TREE
This causes errors when translating logical addresses to physical:
  btrfs_map_logical_to_physical: Cannot map logical address <addr> to physical
  btrfs_file_read: Error reading extent

The behavior of btrfs_map_logical_to_physical() is to stop traversing
CHUNK_TREE when it encounters first non-CHUNK_ITEM, which makes
only some portion of CHUNK_ITEMs being read.
Change it to skip over non-chunk items.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Sergey Struzh <sergeys@pointgrab.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-06-13 07:49:12 -04:00
Alex Kiernan
0d488e8f50 fs: Add fs_get_type_name to return current filesystem name
Add fs_get_type_name so we can get the current filesystem type.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Eugen Hristev
e71a969cea fs: ext4: fix crash on ext4ls
Found a crash while issuing ext4ls with a non-existent directory.
Crash test:

=> ext4ls mmc 0 1
** Can not find directory. **
data abort
pc : [<3fd7c2ec>]          lr : [<3fd93ed8>]
reloc pc : [<26f142ec>]    lr : [<26f2bed8>]
sp : 3f963338  ip : 3fdc3dc4     fp : 3fd6b370
r10: 00000004  r9 : 3f967ec0     r8 : 3f96db68
r7 : 3fdc99b4  r6 : 00000000     r5 : 3f96dc88  r4 : 3fdcbc8c
r3 : fffffffa  r2 : 00000000     r1 : 3f96e0bc  r0 : 00000002
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Tested on SAMA5D2_Xplained board (sama5d2_xplained_mmc_defconfig)

Looks like crash is introduced by commit:
"fa9ca8a" fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls

Issue is that dirnode is not initialized, and then freed if the call
to ext4_ls fails. ext4_ls will not change the value of dirnode in this case
thus we have a crash with data abort.

I added initialization and a check for dirname being NULL.

Fixes: "fa9ca8a" fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-23 17:30:04 -04:00
Patrice Chotard
87deefeccc ubifs: avoid assert failed in ubifs.c
This patch solves assert failed displayed in the console during a boot.
The root cause is that the ubifs_inode is not already allocated when
ubifs_printdir and ubifs_finddir functions are called.

Trace showing the issue:
feed 'boot.scr.uimg', ino 94, new f_pos 0x17b40ece
dent->ch.sqnum '7132', creat_sqnum 3886945402880
UBIFS assert failed in ubifs_finddir at 436
INODE ALLOCATION: creat_sqnum '7129'
Found U-Boot script /boot.scr.uimg

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-09 11:53:55 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Bradley Bolen
05ea83b67e ubifs: Change value of mutex_is_locked()
The mutex lock and unlock functions are stubbed out and mutex_is_locked
was 0.  This caused asserts to fail in ubifs code when checking that the
mutex was locked.  For example,

UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278

Assume that the "mutex" is locked since that is the normal case when it
is checked in the ubifs code.

Signed-off-by: Bradley Bolen <bradleybolen@gmail.com>
2018-04-11 11:27:07 +02:00
Marek Behún
22fc7b6cd6 fs: btrfs: Remove unused debug code left from development
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-04-06 17:04:33 -04:00
Andre Heider
44683170f8 fs: cbfs: fix locating the cbfs header
The value at the end of the rom is not a pointer, it is an offset
relative to the end of rom.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2018-03-31 16:00:03 +08:00
Petr Vorel
afb6fda2ae Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig
Introduce another difference from upstream (kernel) source in
fs/ubifs/super.c: adding preprocessor condition as y variable in
mount_ubifs() depends on CONFIG_UBIFS_SILENCE_MSG:
fs/ubifs/super.c:1337:15: error: variable ?y? set but not used [-Werror=unused-but-set-variable]
  long long x, y;

Not setting CONFIG_UBIFS_SILENCE_MSG in am335x_igep003x_defconfig and
igep0032_defconfig. Although it was defined in their config headers, it
depends on CMD_UBIFS which is not set for them.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Heiko Schocher <hs@denx.de>
2018-03-24 06:37:10 +01:00
Petr Vorel
e995128158 ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG
Use of CONFIG_UBIFS_SILENCE_MSG was added in
147162dac6 ("ubi: ubifs: Turn off verbose prints")

Then it was removed in
ff94bc40af ("mtd, ubi, ubifs: resync with Linux-3.14")

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-24 06:36:54 +01:00
Marek Behún
51be471663 fs: ext4: Do not print mount fail message when not ext4 filesystem
Other filesystem drivers don't do this.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-03-09 12:31:07 -05:00
Heinrich Schuchardt
428e60e079 yaffs2: iterator variable cannot be NULL
The iterator of list_for_each() is never NULL.

Identified with coccinelle.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09 12:31:06 -05:00
Tom Rini
f39bfec230 fs: btrfs: Fix printf format character warning
When printing a size_t value we need to use %zu for portability between
32bit and 64bit targets.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-01-29 12:50:08 -05:00
Alberto Sánchez Molero
2021f083ed fs: btrfs: Fix unaligned memory accesses
Loading files stored with lzo compression from a btrfs filesystem was
producing unaligned memory accesses, which were causing a data abort
and a reset on an Orange Pi Zero.

The change in hash.c is not triggered by any error but follows the
same pattern. Please confirm.

Fixed according to doc/README.unaligned-memory-access.txt

Signed-off-by: Alberto Sánchez Molero <alsamolero@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
2018-01-28 12:27:12 -05:00
Tuomas Tynkkynen
8bad6cb176 fs: fat: Drop CONFIG_SUPPORT_VFAT
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since
2003), so as a result VFAT support is always enabled regardless of
whether a board config defines it or not. Drop this unnecessary option.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:31 -05:00
Tuomas Tynkkynen
e8df14d216 fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:31 -05:00
Tuomas Tynkkynen
3d22bae57f fs: Migrate ext4 to Kconfig
Migrate the following symbols to Kconfig:

CONFIG_FS_EXT4
CONFIG_EXT4_WRITE

The definitions in config_fallbacks.h can now be expressed in Kconfig.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:30 -05:00
Heinrich Schuchardt
d2f7158028 fs/fat: remove distractive message in file_fat_read_at()
The message "reading %s\n" may be interesting when
debugging but otherwise it is superfluous.

Only output the message when debugging.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19 15:49:28 -05:00
Heinrich Schuchardt
a327bde783 fs: remove distractive message in fs_read()
The message
"** %s shorter than offset + len **\n"
may be interesting when debugging but it does not indicate an
error.

So we should not write it if we are not in debug mode.

Fixes: 7a3e70cfd8 fs/fs.c: read up to EOF when len would read past EOF
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19 15:49:28 -05:00
Jean-Jacques Hiblot
2c33b0c7d8 fat write: Fixed a problem with the case of file names when writing files
commit 21a24c3bf3 ("fs/fat: fix case for FAT shortnames") made it
possible that get_name() returns file names with some upper cases.
find_directory_entry() must be updated to take this account, and use
case-insensitive functions to compare file names.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-10 08:05:51 -05:00
Masahiro Yamada
6ae3900a86 mtd: nand: Rename nand.h into rawnand.h
This header was renamed to rawnand.h in Linux.

The following is the corresponding commit in Linux.

  commit d4092d76a4a4e57b65910899948a83cc8646c5a5
  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
  Date:   Fri Aug 4 17:29:10 2017 +0200

      mtd: nand: Rename nand.h into rawnand.h

      We are planning to share more code between different NAND based
      devices (SPI NAND, OneNAND and raw NANDs), but before doing that
      we need to move the existing include/linux/mtd/nand.h file into
      include/linux/mtd/rawnand.h so we can later create a nand.h header
      containing all common structure and function prototypes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:00 +09:00
Neil Armstrong
34dd853ce5 fat: Use cache aligned buffers for fat_opendir
Before this patch one could receive following errors when executing "fatls"
command on machine with cache enabled (ex i.MX6Q) :

=> fatls mmc 0:1
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8

To alleviate this problem - the calloc()s have been replaced with
malloc_cache_aligned() and memset().

After those changes the buffers are properly aligned (with both start
address and size) to SoC cache line.

Fixes: 09fa964bba ("fs/fat: Fix 'CACHE: Misaligned operation at range' warnings")
Suggested-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-29 22:36:59 -05:00
Heinrich Schuchardt
24f48416df fs: avoid possible NULL dereference in fs_devread
It is unwise to first dereference a variable
and then to check if it was NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-29 22:30:50 -05:00
Tom Rini
6e6cf015e7 Merge git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-27 07:22:11 -05:00
Heinrich Schuchardt
76df275ce5 yaffs2: rework yaffs_new_obj_id
The iterator variable of list_for_each is never NULL.
if (1 || A) is always true.
Use break if entry found.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-20 20:18:38 -05:00
Heinrich Schuchardt
4b29975fd0 ubifs: no NULL check needed before free
kfree() calls free.
free() checks if the parameter is NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-20 10:13:33 +01:00
Ian Ray
ecdfb4195b ext4: recover from filesystem corruption when reading
Some fixes when reading EXT files and directory entries were identified
after using e2fuzz to corrupt an EXT3 filesystem:

 - Stop reading directory entries if the offset becomes badly aligned.

 - Avoid overwriting memory by clamping the length used to zero the buffer
   in ext4fs_read_file.  Also sanity check blocksize.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-20 09:58:31 +01:00
Masahiro Yamada
8b7f4b9cc1 mtd: remove MTDDEBUG() and CONFIG_MTD_DEBUG
All users of this macro have been converted.  Remove MTDDEBUG and
related CONFIG options.

ubifs_dbg_msg_key() is kept.  It is silent unless DEBUG is defined.

I am not touching scripts/config_whitelist.txt.  The deprecated options
will be dropped by the next resync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 14:07:26 -04:00
Vagrant Cascadian
c005f7edbb fs/jffs2/mini_inflate.c: use "static inline" instead of "inline"
This makes gcc no longer expect an out-of-line version of the
functions being present elsewhere.

This fixes a failure to build on several marvell targets with gcc-7 on
Debian:

  https://bugs.debian.org/877963

Signed-off-by: Adrian Bunk <bunk@debian.org>
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
2017-10-16 09:42:51 -04:00
Engling, Uwe
41ba7f525f jffs2: ECC corrected nand data is ignored
Hello,

I ran into a problem with the JFFS2 filesystem driver implemented in U-Boot.

I've got a NAND device that has correctable ECC errors (corrected somewhere in mtd/nand/nand_base.c).
The NAND driver tells the filesystem layer (jffs2_1pass.c) above that there occurred correctable ECC errors and returns with a "value > 0".
The JFFS2 driver recognizes the corrected ECC errors as real error and skips this block because the only accepts a "return value == 0" as correct.

This problem exists for over 8 years (I checked version 2010.09) so I'm a little bit worried that I interpreted something wrong or didn't get the whole context.

Can someone confirm this bug (and the bugfix) in the u-boot jffs2 driver?

There was a mail in 2012 that mentioned the same problem, but there was no patch:
http://u-boot.10912.n7.nabble.com/JFFS2-seems-to-drop-nand-data-with-ECC-corrections-td142008.html
Sometime after this discussion the return value of nand_read() changed from -EUCLEAN as correctable ECC error to a positive value with the count of ECC corrected errors.

With kind reguards,
Uwe Engling
2017-10-16 09:42:51 -04:00
Marek Behún
38fc683d33 fs: Set .opendir to fs_opendir_unsupported for btrfs
Otherwise fs_opendir will fault.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Marek Behún
733d963e3b fs: btrfs: Remove a foreign language note
I accidentaly left a foreign language note in the code from development.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Marek Behún
ecab881c7f fs: btrfs: Fix usage of uninitialized variables
The variable res should be initialized to 0 in these functions,
because if the searched key is not found, the variable is used
uninitialized.

Reported-by: Coverity (CID: 167335)
Reported-by: Coverity (CID: 167336)
Reported-by: Coverity (CID: 167337)
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Tuomas Tynkkynen
af609e3764 fs/fat: Check malloc return values and fix memory leaks
Check malloc() return values and properly unwind on errors so
memory allocated for fat_itr structures get freed properly.

Also fixes a leak of fsdata.fatbuf in fat_size().

Fixes: 2460098cff ("fs/fat: Reduce stack usage")
Reported-by: Coverity (CID: 167225, 167233, 167234)
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-08 16:19:56 -04:00
Tuomas Tynkkynen
09fa964bba fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
The 'block' field of fat_itr needs to be properly aligned for DMA and
while it does have '__aligned(ARCH_DMA_MINALIGN)', the fat_itr structure
itself needs to be properly aligned as well.

While at it use malloc_cache_aligned() for the other aligned allocations
in the file as well.

Fixes: 2460098cff ("fs/fat: Reduce stack usage")
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-08 16:19:56 -04:00
Tom Rini
fa9ca8a5d2 fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
As reported by Coverity, we did not free dirnode in the case of failure.
Do so now.

Reported-by: Coverity (CID: 131221)
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:22 -04:00
Tuomas Tynkkynen
8df8731474 fs/fat: Fix pathnames using '..' that lead to the root directory
If we end up back in the root directory via a '..' directory entry, set
itr->is_root accordingly. Failing to do that gives spews like
"Invalid FAT entry" and being unable to access directory entries located
past the first cluster of the root directory.

Fixes: 8eafae209c ("fat/fs: convert to directory iterators")
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:19 -04:00
Tuomas Tynkkynen
385b731855 fs/ext4: Fix group descriptor checksum calculation
The current code doesn't compute the group descriptor checksum correctly
for the filesystems that e2fsprogs 1.43.4 creates (they have
'Group descriptor size: 64' as reported by tune2fs). Extend the checksum
calculation to be done as ext4_group_desc_csum() does in Linux.

This fixes these errors in dmesg from running fs-test.sh and makes it
succeed again:

[1671902.620699] EXT4-fs (loop1): ext4_check_descriptors: Checksum for group 0 failed (35782!=10965)
[1671902.620706] EXT4-fs (loop1): group descriptors corrupted!

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:18 -04:00
Masahiro Yamada
9b643e312d treewide: replace with error() with pr_err()
U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

  # define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux.  (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
 (...)
// </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 11:59:44 -04:00
Tom Rini
6b7fd350e8 fs/btrfs: Fix warning in btrfs_check_super()
We specifically say that the last arg is u32, so use %lu.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-03 08:44:13 -04:00
Marek Behún
0c936ee319 fs: btrfs: Add U-Boot fs handlers.
Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/Kconfig
 create mode 100644 fs/btrfs/Makefile
 create mode 100644 fs/btrfs/btrfs.c
 create mode 100644 include/btrfs.h
2017-10-02 21:52:18 -04:00
Marek Behún
21a14facb1 fs: btrfs: Add single-device read-only BTRFS implementation
This adds the proper implementation for the BTRFS filesystem.
The implementation currently supports only read-only mode and
the filesystem can be only on a single device.

Checksums of data chunks is unimplemented.

Compression is implemented (ZLIB + LZO).

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/btrfs.h
 create mode 100644 fs/btrfs/chunk-map.c
 create mode 100644 fs/btrfs/compression.c
 create mode 100644 fs/btrfs/ctree.c
 create mode 100644 fs/btrfs/dev.c
 create mode 100644 fs/btrfs/dir-item.c
 create mode 100644 fs/btrfs/extent-io.c
 create mode 100644 fs/btrfs/hash.c
 create mode 100644 fs/btrfs/inode.c
 create mode 100644 fs/btrfs/root.c
 create mode 100644 fs/btrfs/subvolume.c
 create mode 100644 fs/btrfs/super.c
2017-10-02 21:52:17 -04:00
Marek Behún
597b4aff7b fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functions
BTRFS on disk structures are stored in Little Endian. Add functions
to convert this structures to cpu and to disk format.

On Little Endian hosts, these functions do nothing.

On Big Endian the CALL_MACRO_FROM_EACH from variadic-macro.h is used
to define all the members for each structure on which cpu_to_le* or
le*_to_cpu is to be called.

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/conv-funcs.h
2017-10-02 21:52:17 -04:00
Marek Behún
d4a704af5d fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)
Add btrfs_tree.h and ctree.h from Linux which contains constants
and structures for the BTRFS filesystem.

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/btrfs_tree.h
 create mode 100644 fs/btrfs/ctree.h
2017-10-02 21:52:17 -04:00
Marek Behún
5994e8b643 fs: Create a common fs_devread for ext4/reiserfs/zfs
The ext4, reiserfs and zfs filesystems all have their own implementation
of the same function, *_devread. Generalize this function into fs_devread
and put the code into fs/fs_internal.c.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
[trini: Move fs/fs_internal.o hunk to the end of fs/Makefile as all
cases need it]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02 21:51:50 -04:00
Tom Rini
2460098cff fs/fat: Reduce stack usage
We have limited stack in SPL builds.  Drop itrblock and move to
malloc/free of itr to move this off of the stack.  As part of this fix a
double-free issue in fat_size().

Signed-off-by: Tom Rini <trini@konsulko.com>
---
Rework to use malloc/free as moving this to a global overflows some SH
targets.
2017-09-22 07:37:43 -04:00
Rob Clark
725ffdb5cb fs/fat: fix fatbuf leak
A new fatbuf was allocated by get_fs_info() (called by fat_itr_root()),
but not freed, resulting in eventually running out of memory.  Spotted
by running 'ls -r' in a large FAT filesystem from Shell.efi.

fatbuf is mainly used to cache FAT entry lookups (get_fatent())..
possibly once fat_write.c it can move into the iterator to simplify
this.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-15 09:03:15 -04:00
Rob Clark
265edc03d5 fs/fat: Clean up open-coded sector <-> cluster conversions
Use the clust_to_sect() helper that was introduced earlier, and add an
inverse sect_to_clust(), plus update the various spots that open-coded
this conversion previously.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:15 -04:00
Rob Clark
21a24c3bf3 fs/fat: fix case for FAT shortnames
Noticed when comparing our output to linux.  There are some lcase bits
which control whether filename and/or extension should be downcase'd.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:14 -04:00