Commit graph

6137 commits

Author SHA1 Message Date
Tom Rini
5b958dea5c Merge branch '2022-01-16-bootstd-updates'
To quote the author:
So far standard boot lacks a boot menu, although it is possible to create
a rudimentary one using the existing 'bootmenu' command.

Even then, this text-based menu offer only basic functionality and does
not take full advantage of the displays which are common on many devices.

This series provides a 'bootflow menu' command which allows the user to
select from the available bootflows. An attempt is made to show the name
of the available operating systems, by reading more information into the
bootflow. A logo can be read also, where supported, so that this can be
presented to the user when an option is highlighted.

Full use is made of TrueType fonts, if enabled. For cases where only a
serial console is available, it falls back to a simple text-based menu.

All of this is implementing using a new 'expo' construct, a collection of
scenes (like menu screens) which can be navigated by the user to view
information and select options. This is fairly general and should be able
to cope with a wider array of use cases, with less hacking of the menu
code, such as is currently needed for CMD_BOOTEFI_BOOTMGR.

Of course it would be possible to enhance the existing menu rather than
creating a new setup. Instead it seems better to make the existing menu
use expo, if code space permits. It avoids the event-loop problem and
should be more extensible, given its loosely coupled components and use of
IDs instead of pointers. Further motivation is provided in the
documentation.

For now the CLI keypress-decoding code is split out to be used by the new
menu. The key codes defined by menu.h are reused also.

This is of course just a starting point. Some ideas for future work are
included in the documentation.
2023-01-17 08:55:40 -05:00
Simon Glass
9e7ac0b0be menu: Factor out menu-keypress decoding
Move this code into a separate function so that it can be used in the new
VBE menu.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
30f3333d88 image: Move common image code to image_board and command
We should use the cmd/ directory for commands rather than for common code
used elsewhere in U-Boot. Move the common 'source' code into
image-board.c to achieve this.

The image_source_script() function needs to call run_command_list()  so
seems to belong better in the command library. Move and rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
32bab0eae5 menu: Make use of CLI character processing
Avoid duplicating some of the escape-sequence processing here and use the
CLI function instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
86cc3c5215 menu: Use a switch statement
Convert the long line of if() statements to a switch() since this makes
better use of the C language.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
d0ca98dbd9 menu: Update bootmenu_loop() to return the code
Use the return value to save having to pass around a pointer. This also
resolves any ambiguity about what *key contains when the function is
called.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
5712976b26 menu: Update bootmenu_autoboot_loop() to return the code
Use the return value to save having to pass around a pointer. This also
resolves any ambiguity about what *key contains when the function is
called.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
2da4a15e7e menu: Rename KEY_... to BKEY_...
This enum values conflict with linux/input.h so rename them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Simon Glass
b08e9d4b66 cli: Move readline character-processing to a state machine
The current cread_line() function is very long. It handles the escape
processing inline. The menu command does similar processing but at the
character level, so there is some duplication.

Split the character processing into a new function cli_ch_process() which
processes individual characters and returns the resulting input character,
taking account of escape sequences. It requires the caller to set up and
maintain its state.

Update cread_line() to use this new function.

The only intended functional change is that an invalid escape sequence
does not add invalid/control characters into the input buffer, but instead
discards these.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Jagan Teki
ffb191e458 arm: rockchip: Add RV1126 arch core support
Rockchip RV1126 is a high-performance vision processor SoC
for IPC/CVR, especially for AI related application.

Add arch core support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: I22fde40ec375e3c6aba39808abf252edc45d4b04
2023-01-16 18:01:11 +08:00
Patrick Delaunay
5454dea313 usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT
Add a new CONFIG_USB_HUB_DEBOUNCE_TIMEOUT to increase the
HUB_DEBOUNCE_TIMEOUT value, for example to 2s because some usb device
needs around 1.5s or more to make the hub port status to be
connected steadily after being powered off and powered on.

This 2s value is aligned with Linux driver and avoids to configure
"usb_pgood_delay" as a workaround for connection timeout on
some USB device; normally the env variable "usb_pgood_delay" is used
to delay the first query after power ON and thus the device answer,
but this variable not used to increase the connection timeout delay.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-14 14:10:30 +01:00
Tom Rini
fe4c21de4f Add driver to manage onboard hub supplies
Add calibration support for stm32-adc
 Linux kernel v6.1 DT synchronization for stm32mp151.dtsi
 stm32mp157a-dk1-scmi-u-boot.dtsi update
 Add support of OP-TEE and STM32MP13x in bsec driver
 ECDSA various fixes for stm32mp
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmPBXKccHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pqAsD/9DhQqYRxCNdFmvchPq
 svu9qB/9lig27IjjLdnUQpIp2xbMH7ki90JrV9Bk6uet6+46mtNlddLhUjJmlEG3
 QQGJzEohYQO7T2RZ1PoHbgQMow/wkZn0Li0zDYW2FHlBdZP1Yd4c+rjiVyYg0oHZ
 z5B/QkXIIo5czVRixwU7RzERfHWbzRAVSJ9nqnchOZCt25gkTwfzoeOtdjg3/H48
 AmdMs4/z3Vcc4MkMAb3rQbPGCjrlzPEVSEPiGQrSNoVl7u6sRz24gJ0uoJV9NRY+
 8IsAHXMZ4agYUnBSilupTZDOwg9RzX1NammY7a9Fw5Ew0qI7YoolhsEoChBeBXGM
 IfH8MB5Jiw1aZpUL6bHX83OpVgpDl/yIZyfWniXQq7tDgwNq6NEtigyDnFr8Z4bS
 QuLmSCDprRM3OuhZTb6ZQBg4A4mRGU4ASOaVyb0kQ+x6zEVeklxi1EAYIVggKWem
 DimaSa2zqjWieYQy5JmhraH7Qnb4/OfgtXl9Yj3s1P1bI7kuuCSzJOeBl8Gv13pK
 kJQG73ar4CEg3hxTXtrrQ6Vl9ti0K2GGaeq2IZP7MJDSIKitgZIIc+b0jku0pfr8
 ep6Ecql1xVExYPqn4Y9pVT6YuuRy2M+ag3dbtBWv79h0oSZUuDFy8RZssHXYA/RB
 zzGwJT0N9U2Zm0VxTCz2wBioLQ==
 =SNID
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20230113' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add driver to manage onboard hub supplies
Add calibration support for stm32-adc
Linux kernel v6.1 DT synchronization for stm32mp151.dtsi
stm32mp157a-dk1-scmi-u-boot.dtsi update
Add support of OP-TEE and STM32MP13x in bsec driver
ECDSA various fixes for stm32mp
2023-01-13 09:56:19 -05:00
Marek Vasut
48b3ecbedf gpio: Get rid of gpio_hog_probe_all()
The gpio_hog_probe_all() functionality can be perfectly well replaced by
DM_FLAG_PROBE_AFTER_BIND DM flag, which would trigger .probe() callback
of each GPIO hog driver instance after .bind() and thus configure the
hogged GPIO accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-01-12 14:06:16 -05:00
Nikita Shubin
cf7aa03543 common: spl: ram: fix return code
Instead of always retuning success, return actual result of
load_simple_fit_image or spl_parse_image_header, otherwise we
might end up jumping on uninitialized spl_image->entry_point.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-01-12 11:25:46 -05:00
Harald Seiler
33965c7e18 console: Add option to keep it silent until env is loaded
Add a config-option which forces the console to stay silent until the
proper environment is loaded from flash.

This is important when the default environment does not silence the
console but no output must be printed when 'silent' is set in the flash
environment.

After the environment from flash is loaded, the console will be
silenced/unsilenced depending on it.  If PRE_CONSOLE_BUFFER is also
used, the buffer will now be flushed if the console should not be
silenced.

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-12 11:25:17 -05:00
Fabrice Gasnier
ba1fa2abde usb: onboard-hub: add driver to manage onboard hub supplies
The main issue the driver addresses is that a USB hub needs to be
powered before it can be discovered. This is often solved by using
"regulator-always-on".

This driver is inspired by the Linux v6.1 driver. It only enables (or
disables) the hub vdd (3v3) supply, so it can be enumerated.
Scanning of the device tree is done in a similar manner to the sandbox,
by the usb-uclass. DT part looks like:

&usbh_ehci {
	...
	#address-cells = <1>;
	#size-cells = <0>;
	hub@1 {
		compatible = "usb424,2514";
		reg = <1>;
		vdd-supply = <&v3v3>;
	};
};

When the bus gets probed, the driver is automatically probed/removed from
the bus tree, as an example on stm32:
STM32MP> usb start
starting USB...
STM32MP> dm tree
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 usb           0  [ + ]   ehci_generic          |   |-- usb@5800d000
 usb_hub       0  [ + ]   usb_onboard_hub       |   |   `-- hub@1
 usb_hub       1  [ + ]   usb_hub               |   |       `-- usb_hub

STM32MP> usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Hub (480 Mb/s, 2mA)

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-01-12 16:19:53 +01:00
Marek Vasut
721307eba0 cmd: exit: Fix return value propagation out of environment scripts
Make sure the 'exit' command as well as 'exit $val' command exits
from environment scripts immediately and propagates return value
out of those scripts fully. That means the following behavior is
expected:

"
=> setenv foo 'echo bar ; exit 1' ; run foo ; echo $?
bar
1
=> setenv foo 'echo bar ; exit 0' ; run foo ; echo $?
bar
0
=> setenv foo 'echo bar ; exit -2' ; run foo ; echo $?
bar
0
"

As well as the followin behavior:

"
=> setenv foo 'echo bar ; exit 3 ; echo fail'; run foo; echo $?
bar
3
=> setenv foo 'echo bar ; exit 1 ; echo fail'; run foo; echo $?
bar
1
=> setenv foo 'echo bar ; exit 0 ; echo fail'; run foo; echo $?
bar
0
=> setenv foo 'echo bar ; exit -1 ; echo fail'; run foo; echo $?
bar
0
=> setenv foo 'echo bar ; exit -2 ; echo fail'; run foo; echo $?
bar
0
=> setenv foo 'echo bar ; exit ; echo fail'; run foo; echo $?
bar
0
"

Fixes: 8c4e3b79bd ("cmd: exit: Fix return value")
Reviewed-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-11 15:02:24 -05:00
Shenlin Liang
c9c42ad21f common:autoboot:modify function parameters
the blob parameter of the function process_fdt_options has not been
invoked in the function body and should be changed to void type

Signed-off-by: Shenlin Liang <liangshenlin@eswincomputing.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-11 11:54:49 -05:00
Tom Rini
cebdfc22da Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-09 11:30:08 -05:00
Pali Rohár
d1f4b090dd common/memsize.c: Check for overflow in get_effective_memsize() only for mpc85xx
This reverts commit 777aaaa706 ("common/memsize.c: Fix
get_effective_memsize() to check for overflow") for non-mpc85xx platforms.

The changes to this generic function, which is intended to help with
32bit platforms with large amounts of memory has unintended side effects
(which in turn lead to boot failures) on other platforms which were
previously functional.

For now do overflow check only for powerpc mpc85xx platform. It is needed
to prevent crashing of P1/P2 boards with 4GB DDR module in 32-bit mode.

Fixes: 777aaaa706 ("common/memsize.c: Fix get_effective_memsize() to check for overflow")
Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-07 18:01:53 -05:00
Tom Rini
90c7888c9d common/spl/spl_ram: Remove unused default
We ask for CONFIG_SPL_LOAD_FIT_ADDRESS in Kconfig, so we cannot define
it in C as a fall-back. However, this option previously was buried under
"if ... endif" Kconfig logic. Rework a number of config options to now
have more robust dependency lines so that we can ask this address when
needed. With that done, we can remove the fallback in spl_ram.c.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 13:01:13 -05:00
Tom Rini
7c5c137c41 global: Migrate CONFIG_PRAM to CFG
Perform a simple rename of CONFIG_PRAM to CFG_PRAM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
1d457dbb91 global: Migrate CONFIG_MAX_MEM_MAPPED to CFG
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
dd5b58c491 global: Migrate CONFIG_MALLOC_F_ADDR to CFG
Perform a simple rename of CONFIG_MALLOC_F_ADDR to CFG_MALLOC_F_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
218ce3695b global: Remove undef CONFIG_... for unused values
We have a number of places that undef CONFIG_... while we never
reference CONFIG_... in the first place. Remove these lines.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Jagan Teki
f365971229 spl: Kconfig: Fix SPL_OPTEE_IMAGE dependency
fdt_addr will build as part of SPL_LOAD_FIT or SPL_LOAD_FIT_FULL
which is indeed required to build optee image support in SPL.

common/spl/spl.c: In function ‘jump_to_image_optee’:
common/spl/spl.c:220:46: error: ‘struct spl_image_info’ has no member named ‘fdt_addr’
  220 |         spl_optee_entry(NULL, NULL, spl_image->fdt_addr,

Fix the dependency support.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
2022-12-22 15:39:13 -05:00
Tom Rini
7d212af2b1 usb: Update USB_STORAGE dependencies
As it's no longer possible to have !DM_USB set, we can remove these
dependencies.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-21 19:04:33 -05:00
Tom Rini
14f43797d0 Prepare v2023.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmOgaw0ACgkQFHw5/5Y0
 tyxIeQv8DfAAB8hN+wWeDhQAJBXBLvV+RrocGJ2lpuWN0DUgT955l0zSjP4eD5I/
 sSsT8iJ15obkbWHq61V9W81Velw5qR+gHW9IAzFKiQBfvdcdfgWFeme9fWp/gqxn
 vvPc2sULA9utkc+kQ+qJy2hmTM7I0ZbKzUwTXSv+Tp9on3vlc0quKSHiZ1EvHNww
 8tW13d1r+Be+CC+GVPrhJojfKBcYVJhW21rJMgb4JdfGNWKmpUpF6fUzHe0wiy2P
 HSnScr44E099t9RDZabw0V1fEgQqxIAmL1qQamXf9ddLZQM9Sq63lygTtGsqg61+
 qeHCZVjPg9cXayGfRVesH8sko3vW+IPuo0Q6Ox0vAyRSyzTpOcTuzn3RcMrq+mfu
 ZRF32aFJKVvAI3xesOj1aCBBYjl4POiHA8i3yeP9KcjqW3So0aphDtxp1idgwOZl
 kIxuC4ItWyF7xoyng/7RWwr2VjcKSyw58stRjfV+WNcByV4+ud1A59vsgZOqO49m
 0bLx5dGu
 =EX/F
 -----END PGP SIGNATURE-----

Merge tag 'v2023.01-rc4' into next

Prepare v2023.01-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21 13:09:01 -05:00
Dai Okamura
fda2253d12 spl: spl_legacy: fix invalid offset in SPL_COPY_PAYLOAD_ONLY
This fixes the header offset calculation.

This issue was found on uniphier v7 SoCs with SPL.

Fixes: 06377c5a1f ("spl: spl_legacy: Fix NAND boot on OMAP3 BeagleBoard")
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221209114021.3074978-1-okamura.dai@socionext.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 14:35:55 +01:00
Kautuk Consul
ac14155a2a common/spl/Kconfig: add dependency on SPL_SEMIHOSTING for SPL payload
When we enable CONFIG_SPL and CONFIG_SPL_SEMIHOSTING then the code
in common/spl/spl_semihosting.c tries to use the
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME string which remains undeclared
unless SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS are configured.

Add a dependency of SPL_SEMIHOSTING in the depends for
SPL_FS_LOAD_PAYLOAD_NAME so that the code compiles fine.

Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-08 15:16:10 +08:00
Tom Rini
68e54040cc sandbox: Move CONFIG_IO_TRACE to Kconfig
This is only used on sandbox, so select it there.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:07:13 -05:00
Tom Rini
19b4040df0 Convert CONFIG_HWCONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
f16b1a6c00 spl: Migrate SYS_SATA_FAT_BOOT_PARTITION to Kconfig
This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the
current default via Kconfig rather than C code.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
ecc8d425fd global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
4e5909450e global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Heinrich Schuchardt
27380d885d console: file should always be non-negative
We use the parameter file in console functions to choose from an array
after checking against MAX_FILES but we never check if the value of file
is negative.

Running ./u-boot -T -l and issuing the poweroff command has resulted in
crashes because os_exit() results in std::ostream::flush() calling U-Boot's
fflush with file being a pointer which when converted to int may be
represented by a negative number.

This shows that checking against MAX_FILES is not enough. We have to ensure
that the file argument is always positive.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-02 19:17:24 +01:00
Samuel Holland
4b0a1f5987 spl: Fix SPL_ATF and SPL_OPENSBI dependencies
The code for these two options depends on having the FIT loadables
recorded in the FDT. Thus, these options require the full version of
the SPL_LOAD_FIT code.

Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-11-21 09:23:00 -05:00
Pali Rohár
60d7820093 Revert "cli_readline: Only insert printable chars"
This reverts commit d2e64d29c4.

This commit broke support for pound sign (£) and euro sign (€) keys on
Nokia N900 keypad.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-21 09:23:00 -05:00
Tom Rini
02f5a01441 SYS_NONCACHED_MEMORY: Correct comment in common/board_f.c
The comment block in reserve_noncached has a typo in one filename and
an incorrect filename in another function reference. Correct both of
these.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
d332cd59f7 Pull request for efi-2023-01-rc1-4
Documentation:
 
 * Provide a document about security issue handling.
 
 UEFI:
 
 * Let networking support depend on NETDEVICES.
 * Discover if no efi_system_partition is set.
 
 Other:
 
 * MAINTAINERS: add arch/arm/lib/*_efi.* to EFI_PAYLOAD.
 -----BEGIN PGP SIGNATURE-----
 
 iQIyBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmNnnfAACgkQxIHbvCwF
 GsRGhw/47xCMpdAm6FhVZrBTuh9WG43Jb9rpw1a86eaebysNcxATFbJ3uWWj2pJd
 duFPJVSxJ0yt0TAAZrCDnMU7epLLHRbBjOPAEyG2xjoVyJjJw04UG6P3iKbeY5Fs
 8IZFBQWmO602jdCnrJg8DGGwX4UfQqS0x2V8pSIW620+luH61bibKNUrT8KK7jAb
 NXan6Q08L9V3OjYEfCnHbnWWZbwt8ZlqVKYZ/8u6+LJTHAioU8SHJeRd7GxMDoGN
 SuT7647IGgyeYYncUWUY3/NbrXEm1oz/qm2I8QmCzin1ipMmYwh9mrW+gyu8bQyO
 y4fuJ1RvCB18dpFzoisK5WvjZSd0YsPQkqm3bJudbgNhBF9BmN32ywWRzXhaibO8
 +IoFQS84+sIXB4M17hAh422fePaEJ1Yis9Lj8CgAEgdcR1fHxNA5zHH9kwBNXvJd
 tjbaSin9Rw4iRFDDLRtgFeWSS+uBz51EwrqN/MTdgJw9wAQY3wGKqS1oHBFc3SLf
 igx9BoGioLox7YRd3u3Acr2IQvhHDL9TBSNAf7xF51/d4foKCZ8zC8iWx6Vf/Xj9
 lXRwOp4oawYipN/SSoNQGtRJj9uZmtWG3a19cyJru4ah1IgTNSSj/Xz79Go0aHj1
 ebb5Rd+0wMtyYzjeTFzrjuwav7ix2H/t6PUwUdW3QtiHPoKjhg==
 =MoPl
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc1-4' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc1-4

Documentation:

* Provide a document about security issue handling.

UEFI:

* Let networking support depend on NETDEVICES.
* Discover if no efi_system_partition is set.

Other:

* MAINTAINERS: add arch/arm/lib/*_efi.* to EFI_PAYLOAD.
2022-11-06 07:51:44 -05:00
AKASHI Takahiro
023d9c9393 efi_loader: remove CONFIG_EFI_SETUP_EARLY
Since the commit a9bf024b29 ("efi_loader: disk: a helper function to
create efi_disk objects from udevice"), CONFIG_EFI_SETUP_EARLY option is
by default on and will never be turned off.

So just remove this option.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-06 10:50:04 +01:00
Tom Rini
898bd53e6a Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- 3 important fixes
2022-11-04 11:19:58 -04:00
Janne Grunau
04448899de usb: storage: continue probe on "Invalid device"
Fixes a crash during probing of sd card readers without medium present.
Seen with the device below but reported for many other devices.

  idVendor           0x0bda Realtek Semiconductor Corp.
  idProduct          0x0326 Card reader
  bcdDevice           11.24
  iManufacturer           1 Realtek
  iProduct                2 USB3.0 Card Reader
  iSerial                 3 201404081410

Link: https://github.com/AsahiLinux/linux/issues/44
Link: https://lists.denx.de/pipermail/u-boot/2022-July/489717.html

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-11-04 12:22:45 +01:00
Marek Vasut
3406e9d8af usb: Add 1ms delay after first Get Descriptor request
Logitech Unifying Receiver 046d:c52b bcdDevice 12.10 seems
sensitive about the first Get Descriptor request. If there
are any other requests in the same microframe, the device
reports bogus data, first of the descriptor parts is not
sent to the host. Wait over one microframe duration before
issuing subsequent requests to avoid probe failure with
this device, since it can be used to connect USB keyboards.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Janne Grunau <j@jannau.net>
2022-11-03 23:36:48 +01:00
Stefan Roese
8450b97bf4 mips: mtmips: spl/Kconfig: Set CONFIG_SPL_PAD_TO to 0x0 for ARCH_MTMIPS
It was noticed that while converting CONFIG_SPL_PAD_TO to Kconfig its
value for the MIPS MT762x/8x targets got not ported correctly. Its
default is not 0x10000 instead of 0x0. This patch fixes this issue.

Fixes: ca8a329a1b ("Convert CONFIG_SPL_PAD_TO et al to Kconfig")
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Ruben Winters <Ruben.Winters@gooiland-elektro.nl>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2022-11-02 21:54:26 +01:00
Rasmus Villemoes
50128aeb0f cyclic: get rid of cyclic_init()
Currently, we must call cyclic_init() at some point before
cyclic_register() becomes possible. That turns out to be somewhat
awkward, especially with SPL, and has resulted in a watchdog callback
not being registered, thus causing the board to prematurely reset.

We already rely on gd->cyclic reliably being set to NULL by the asm
code that clears all of gd. Now that the cyclic list is a hlist, and
thus an empty list is represented by a NULL head pointer, and struct
cyclic_drv has no other members, we can just as well drop a level of
indirection and put the hlist_head directly in struct
global_data. This doesn't increase the size of struct global_data,
gets rid of an early malloc(), and generates slightly smaller code.

But primarily, this avoids having to call cyclic_init() early; the cyclic
infrastructure is simply ready to register callbacks as soon as we
enter C code.

We can still end up with schedule() being called from asm very early,
so we still need to check that gd itself has been properly initialized
[*], but once it has, gd->cyclic_list is perfectly fine to access, and
will just be an empty list.

As for cyclic_uninit(), it was never really the opposite of
cyclic_init() since it didn't free the struct cyclic_drv nor set
gd->cyclic to NULL. Rename it to cyclic_unregister_all() and use that
in test/, and also insert a call at the end of the board_init_f
sequence so that gd->cyclic_list is a fresh empty list before we enter
board_init_r().

A small piece of ugliness is that I had to add a cast in
cyclic_get_list() to silence a "discards 'volatile' qualifier"
warning, but that is completely equivalent to the existing handling of
the uclass_root_s list_head member.

[*] I'm not really sure where we guarantee that the register used for
gd contains 0 until it gets explicitly initialized, but that must be
the case, otherwise testing gd for being NULL would not make much sense.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:42:03 +01:00
Rasmus Villemoes
2896839483 cyclic: switch to using hlist instead of list
A hlist is headed by just a single pointer, so can only be traversed
forwards, and insertions can only happen at the head (or before/after
an existing list member). But each list node still consists of two
pointers, so arbitrary elements can still be removed in O(1).

This is precisely what we need for the cyclic_list - we never need to
traverse it backwards, and the order the callbacks appear in the list
should really not matter.

One advantage, and the main reason for doing this switch, is that an
empty list is represented by a NULL head pointer, so unlike a
list_head, it does not need separate C code to initialize - a
memset(,0,) of the containing structure is sufficient.

This is mostly mechanical:

- The iterators are updated with an h prefix, and the type of the
  temporary variable changed to struct hlist_node*.

- Adding/removing is now just hlist_add_head (and not tail) and
  hlist_del().

- struct members and function return values updated.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:55 +01:00
Rasmus Villemoes
6b84b1db2d cyclic: drop redundant cyclic_ready flag
We're already relying on gd->cyclic being NULL before cyclic_init() is
called - i.e., we're relying on all of gd being zeroed before entering
any C code. And when we do populate gd->cyclic, its ->cyclic_ready
member is automatically set to true. So we can actually just rely on
testing gd->cyclic itself.

The only wrinkle is that cyclic_uninit() actually did set
->cyclic_ready to false. However, since it doesn't free gd->cyclic,
the cyclic infrastructure is actually still ready (i.e., the list_head
is properly initialized as an empty list).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:42 +01:00
Rasmus Villemoes
d7de5ef629 cyclic: use a flag in gd->flags for recursion protection
As a preparation for future patches, use a flag in gd->flags rather
than a separate member in (the singleton) struct cyclic_drv to keep
track of whether we're already inside cyclic_run().

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mm-venice-*
2022-11-02 08:41:20 +01:00
Sughosh Ganu
467bad5e36 event: Add an event for main_loop
Add an event type EVT_MAIN_LOOP that can be used for registering
events that need to be run after the platform has been initialised and
before the main_loop function is called.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-31 14:47:32 -04:00
Simon Glass
5981d61178 vpl: Allow signature verification
Add the required Kconfig option so that signatures can be verified when
loading a configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:04:00 -04:00
Simon Glass
4218456b3f vbe: Add Kconfig options for VPL
Enable the various features needed in VPL, by adding Kconfig options.

Update the defconfig for sandbox_vpl so that the build for each phase
includes what is needed. Drop LZMA for now and make sure partition support
is omitted in SPL, since it is not needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:03:59 -04:00
Simon Glass
5a61bf17d8 spl: Allow multiple loaders of the same time
At present we only support a single loader of each time. Extra ones are
ignored. This means that only one BOOT_DEVICE_BOARD can be used in the SPL
image.

This is inconvenient since we sometimes want to provide several
board-specific drivers, albeit at different priorties. Add support for
this.

This should have no functional change for existing boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:03:18 -04:00
Simon Glass
6a318b102c bloblist: Drop debugging
Disable debugging by default since this implementation is stable now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:02:44 -04:00
Simon Glass
6e55b114aa spl: Add a separate silence option for SPL
Add an option to allow silent console to be controlled separately in SPL,
so that boot progress can be shown. Disable it by default for sandbox
since it is useful to see what is going on there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:01:31 -04:00
Simon Glass
ec7e8dad26 spl: Refactor controls for console output
The expression in boot_from_devices() is fairly long and appears to be an
artefact from before we could easily call printf(...) and have the call be
nop'd out. So update it to just check CONFIG_SILENT_CONSOLE.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>
2022-10-31 11:01:31 -04:00
Simon Glass
2b8d2ccdc9 spl: Use binman suffix allow symbols of any SPL etype
At present we use symbols for the u-boot-spl entry, but this is not always
what we want. For example, sandbox actually jumps to a u-boot-spl-elf
entry, since sandbox executables are ELF files.

We already handle this with U-Boot by using the '-any' suffix. Add it for
SPL as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:01:31 -04:00
Simon Glass
984639039f Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().

Rename it to resolve this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:01:31 -04:00
Simon Glass
b86986c7b3 video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO
Now that all the old code is gone, rename this option. Driver model
migration is now complete.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
b0c5353c7c video: Drop common LCD implementation
This code is no-longer used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
70cc7b614f video: Drop use of the lcd header file
This file is being removed so drop remaining references to it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
2429068a39 fdt: Drop support for LCD fixup in simplefb
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
0f9b86f811 video: Drop remaining references to CONFIG_LCD
These rely on the old LCD implementation which is to be removed. Drop it
all.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
f9b7bd7e91 video: cmd: Drop old LCD code
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Simon Glass
2285864a3e video: Drop VCXK video controller
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
1dc6517649 Drop CONFIG_LCD_LOGO
This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
ba97899349 video: Drop CONFIG_LCD_INFO
This option is not used anymore since the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
816605652d video: Drop CONFIG_LCD_INFO_BELOW_LOGO
This option is not used anymore since the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
832bcbb083 video: Drop CONFIG_LCD_ALIGNMENT
This option is not needed now that the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Simon Glass
b5b1ce8a21 video: lcd: Drop console rotation
This option is not used in U-Boot anymore. Drop it option and the
associated implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:16 +01:00
Julien Masson
7fcb30c0e0 splash: get devpart from environment variable
By default several types of splash locations are supported and the
user can select one of them through environment var (splashsource).

However the devpart is still hardcoded and we cannot change it from
the environment.

This patch add the support of "splashdevpart" which allow the user to
set the devpart though this environment variable.

Example: image located in splashscreen partition (MMC as raw)
```
splashsource=mmc_raw
splashdevpart=0#splashscreen
```

Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Julien Masson
a638d9a47c splash: support raw image from MMC
The user has now the choice to specify the splash location in the MMC
as a raw storage.

Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:01:40 +01:00
Roger Quadros
3a82cd26ee scripts: Makefile.spl: Enable memory drivers to be built for SPL
Introduce CONFIG_SPL_MEMORY to allow Memory drivers to
be built for SPL.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-26 15:21:11 -04:00
Roger Quadros
06377c5a1f spl: spl_legacy: Fix NAND boot on OMAP3 BeagleBoard
OMAP3 BeagleBoard NAND boot hangs when spl_load_legacy_img() tries
to read the header into 'struct hdr' which is allocated on the
stack.

As the header has already been read once before by spl_nand.c,
we can avoid the extra header allocation and read here by
simply passing around the pointer to the header.

This fixes NAND boot on OMAP3 BeagleBoard.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
2022-10-26 15:20:47 -04:00
Tom Rini
c2c485db45 Merge https://source.denx.de/u-boot/custodians/u-boot-watchdog
- nuvoton: add expire function for generic reset (Jim)
- handle watchdogs during keyed autoboot (Rasmus)
- cyclic: Don't disable cylic function upon exceeding CPU time (Stefan)
- ulp wdog: Updates to support iMX93 and DM (Alice)
2022-10-26 07:45:55 -04:00
Stefan Roese
ddc8d36a74 cyclic: Don't disable cylic function upon exceeding CPU time
With the migration of the watchdog infrastructure to cyclic functions
it's been noticed, that at least one watchdog driver is broken now. As
the execution time of it's watchdog reset function is quite long.

In general it's not really necessary (right now) to disable the cyclic
function upon exceeding CPU time usage. So instead of disabling the
cylic function in this case, let's just print a warning once to show
this potential problem to the user.

Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Tom Rini <trini@konsulko.com>
Cc: Pali Rohár <pali@kernel.org>
2022-10-24 11:10:21 +02:00
Michal Suchanek
9259bd1735 common: board_f: Print information for all sysresets
Boards can have multiple sysresets, iterate all when printing sysreset
info.

Fixes: 23471aed5c ("board_f: Add reset status printing")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-21 16:06:14 -04:00
Tom Rini
f60e6f6767 input: Remove legacy KEYBOARD option
There are no platforms that have not migrated to using DM_KEYBOARD,
remove the legacy option.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-21 13:47:56 -04:00
Tom Rini
73ceadcd72 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
Beside some rather unexciting sync of the DTs from the kernel tree, and
some Kconfig cleanup, there are some improvements for the ARMv5 Allwinner
family, to support boards with the F1C200s (64MB DRAM) better. We will
get actual board support as soon as the DTs have passed the Linux review
process.
There is also support for the X96 Mate TV Box, featuring the H616 SoC and
a full 4GB of DRAM.
Also we found the secret to enable SPI booting on the H616 (pin PC5 must
be pulled to GND), so the SPI boot support patch is now good to go.

Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano,
X96 Mate and OrangePi Zero.
2022-10-20 08:58:05 -04:00
Andre Przywara
177040b1eb sunxi: Kconfig: use SoC-wide values for some symbols
Some configuration symbols formerly defined in header files were
recently converted to Kconfig symbols. This moved their value definition
into *every* defconfig file, even though those values are hardly board
choices.
Use the new Kconfig option to define per-SoC default values, in just one
place, which makes the definition in each defconfig file redundant.

We refrain from setting a sunxi specific value for CONFIG_SYS_BOOTM_LEN,
so this defaults to a much better 64MB for uncompressed arm64 kernels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-10-18 08:18:30 +01:00
Michal Suchanek
7ff12631b4 stdio: Fix class iteration in stdio_add_devices()
There is a complaint in the code that iterates keyboards that we don't
have the _check variant of class iterator but we in fact do, use it.

In the code that iterates video devices there is an attempt to print
errors but the simple iterator does not return a device when there is an
error. Use the _check variant of the iterator as well.

Also format error messages consistently.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-17 21:17:12 -06:00
Alistair Delva
db9d55e210 spl: atf: Fix clang -Wasm-operand-widths warning
common/spl/spl_atf.c:187:51: warning: value size does not match register
  size specified by the constraint and modifier [-Wasm-operand-widths]
    __asm__ __volatile__("msr DAIF, %0\n\t" : : "r" (daif) : "memory");
                                                     ^
common/spl/spl_atf.c:187:34: note: use constraint modifier "w"
    __asm__ __volatile__("msr DAIF, %0\n\t" : : "r" (daif) : "memory");
                                    ^~
                                    %w0

Use %x0 to match what Linux does in <asm/sysreg.h> write_sysreg().

Signed-off-by: Alistair Delva <adelva@google.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
2022-10-10 18:01:23 -04:00
Marek Vasut
fcb670b794 usb: Add missing guard around env_get() in usb_hub
The env_get() might be undefined in case ENV_SUPPORT is disabled,
which may happen e.g. in SPL. Add missing ifdef guard around the
env_get() to prevent build failure.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
2022-10-10 18:08:18 +02:00
Ovidiu Panait
3c29c0fce0 common/board_f: drop ifdefs around header includes
Drop the remaining ifdef around spl.h include.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2022-10-06 21:05:17 -04:00
Ovidiu Panait
d63fc99435 common/board_f: introduce arch_setup_dest_addr()
In order to move ppc-specific code out of setup_dest_addr(), provide an
arch-specific variant arch_setup_dest_addr(), that can be used by
architecture code to fix up the initial reloc address.

It is called at the end of setup_dest_addr() initcall and the default
implementation is a nop stub.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2022-10-06 21:05:17 -04:00
Ovidiu Panait
85e68ae001 common/board_f: move CONFIG_MACH_TYPE logic to arch/arm/lib/bdinfo.c
asm/mach_type.h header and CONFIG_MACH_TYPE macro are arm-specific, so move
related bdinfo logic to arch_setup_bdinfo() in arch/arm/lib/bdinfo.c.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2022-10-06 21:05:17 -04:00
Ovidiu Panait
181cbd4017 common/board_f: remove XTRN_DECLARE_GLOBAL_DATA_PTR dead code
The XTRN_DECLARE_GLOBAL_DATA_PTR declarations in ppc code are permanently
commented out, so there are no users for this macro:
 #if 1
   #define DECLARE_GLOBAL_DATA_PTR   register volatile gd_t *gd asm ("r2")
 #else /* We could use plain global data, but the resulting code is bigger */
   #define XTRN_DECLARE_GLOBAL_DATA_PTR   extern
   #define DECLARE_GLOBAL_DATA_PTR     XTRN_DECLARE_GLOBAL_DATA_PTR \
                                       gd_t *gd
 #endif

Remove all references to this macro, but add a documentation note regarding
the possibility of using plain global data for the GD pointer.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-10-06 21:05:17 -04:00
Tom Rini
2d45913534 Merge branch 'next' 2022-10-03 15:39:46 -04:00
Simon Glass
ee88ba71ac dm: core: Provide a way to reset the device tree
At present there is only one device tree used by the ofnode functions,
except for some esoteric use of live tree. In preparation for supporting
more than one, add a way to reset the list of device trees.

For now this does nothing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29 22:43:43 -04:00
Simon Glass
62d638386c test: Support testing malloc() failures
It is helpful to test that out-of-memory checks work correctly in code
that calls malloc().

Add a simple way to force failure after a given number of malloc() calls.

Fix a header guard to avoid a build error on sandbox_vpl.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2022-09-29 16:07:58 -04:00
Simon Glass
f39e5b802a event: Fix a typo in the EVENT help
Fix the help message.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29 16:07:57 -04:00
Simon Glass
f3543e6944 treewide: Drop image_header_t typedef
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29 16:07:57 -04:00
Simon Glass
d9d7c20b73 treewide: Drop bootm_headers_t typedef
This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29 16:07:57 -04:00
Pierre-Clément Tosi
76f921eb95 board_r: Relocate OF_EMBED if NEEDS_MANUAL_RELOC only
When the embedded device tree is pointed to by the __dtb_dt_*begin
symbols, it seems to be covered by the early relocation code and doesn't
need to be manually patched.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
2022-09-29 10:10:39 -04:00
Rasmus Villemoes
c11cedc876 autoboot: make sure watchdog device(s) are handled with keyed autoboot
Currently, AUTOBOOT_KEYED and its variant AUTOBOOT_ENCRYPTION are
broken when one has an external always-running watchdog device with a
timeout shorter than the configured boot delay (in my case, I have a
gpio-wdt one with a timeout of 1 second), because we fail to call
WATCHDOG_RESET() in the loops where we wait for the bootdelay to
elapse.

This is done implicitly in the !AUTOBOOT_KEYED case,
i.e. abortboot_single_key(), because that loop contains a
udelay(10000), and udelay() does a WATCHDOG_RESET().

To fix this, simply add similar udelay() calls in the other loops.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-27 12:25:51 +02:00
Simon Glass
8149b1500d blk: Rename if_type to uclass_id
Use the word 'uclass' instead of 'if_type' to complete the conversion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-25 08:30:05 -06:00
Pali Rohár
78b5243182 serial: Implement serial_flush() function for console flush() fallback
Like in all other console functions, implement also serial_flush() function
as a fallback int console flush() function.

Flush support is available only when config option CONSOLE_FLUSH_SUPPORT is
enabled. So when it is disabled then provides just empty static inline
function serial_flush().

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-24 11:34:37 -04:00