Commit graph

61686 commits

Author SHA1 Message Date
Heiko Stuebner
c8dd0e42d7 rockchip: dwmmc: add handling for u-boot, spl-fifo-mode
Rockchips dwmmc controllers can't do dma to non-ddr addresses,
like for example the soc-internal sram but during boot parts of
TrustedFirmware need to be placed there from the read FIT image.

So add handling for a u-boot,spl-fifo-mode to not put the mmc
controllers into fifo mode for all time.

The regular fifo-mode property still takes precedent and only
if not set do we check for the spl-specific property.

Suggested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-11-23 23:41:44 +08:00
Jagan Teki
d4fba131bb rock960: Enable USB Gadget
Enable DWC3 core, gadget for rock960 board.

This would help to use fastboot by default.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 23:41:44 +08:00
Jagan Teki
c618bb0042 rockchip: Setup dwc3_device (for non-dm gadgets)
Setup dwc3_device structure for non-dm gadgets, which is used
in rk3399 platforms.

dwc3_device would have basic regbase, dr_mode, high speed
and 16-bit UTMI+ etc.

Cc: Marek Vasut <marex@denx.de>
Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Fix to use CONFIG_USB_DWC3_GADGET instead of CONFIG_USB_DWC3)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 23:41:44 +08:00
James Byrne
66b3ccc8f7 tools: checkpatch: Restore 'debug' and 'printf' to logFunctions list
The 'debug' and 'printf' functions were previously added to the list of
logFunctions in commit 0cab42110d ("checkpatch.pl: Add 'debug' to
the list of logFunctions") and commit 397bfd4642 ("checkpatch.pl:
Add 'printf' to logFunctions") but these additions were lost when newer
versions of checkpatch were pulled in from the upstream Linux
kernel version.

This restores them so that you don't end up in a situation where
checkpatch will give a warning for "quoted string split across lines"
which you cannot fix without getting a warning for "line over 80
characters" instead.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
2019-11-23 10:28:56 -05:00
Heiko Schocher
af77162504 travis: rework NXP layerscape jobs
remove from NXP arm32 all layerscape boards and
build them instead in already existing layerscape
jobs (which now not only build aarch64 boards)

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-11-23 10:28:56 -05:00
Heiko Schocher
56d35f2ed4 travis: move orangepi to vendor job
move orangepi builds into a new job, and exclude
orangepi builds from sunxi and rockchip jobs.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-23 10:28:56 -05:00
Tom Rini
601c2879f8 Pull request for UEFI sub-system for efi-2020-01-rc4 (2)
Use CONFIG_EFI_LOADER=n for ARM11 except for the Raspberry Pi and the
 Raspberry Pi Zero.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl3ZPGAACgkQxIHbvCwF
 GsQLxQ/9H4Q/IJE/3beMEn3R5tpiibiflH9Q7DucuQwnHQGaMKkTOSpumK6bIebI
 hCXtCQhChdoogq2W69P/+A98nnp8NbEQ7zQuzjEsn4w74IDoeOEPeGatnpJjRdL9
 3I2b75zPw9w5JYkvEe472nOlX5UWGdzDJ/WtVc7trECr6fmd6MNbEWQv9UpVSbAD
 9fXV3bPA5vFA40VJ16hG5TFbU5D8oSVZ5m+tnpBDsWAdcKf8pZPbICFyczvYWnu9
 HeoZT+HXR/+lcEkO/7v1tZ/PAlnc7sbquzYXOWG0xcQBAqWRRub/dNdV7SN2GVT6
 i2nhNb1Di69QAOWh5V9obqHzdDvlCVCBFjwOr705x+VnRaP+udeNVagT9PcwtrAY
 CzIr7nGqob3b14NYhCDr3EMyKrRogg+0WbnoZHiwCib2vrwwoaEY9c0Yw7GpbLwh
 zk/ysUg8MeHxNhLayBZJJauxbdp2Afe7GTaQDVnxmy3tzfOUnpWW/D9An0EIlXWi
 99h+zPj4RV0v7RzDCDFouX7tq17QgeImulgQI4/HEBhZxwxHEAikGiIJNOmykQo8
 1GQvd4s/zQ0qcI7CKciAyx+mUijLsNBVh8BaeRz+BV6sST16/K81/G4xQMjOg9m5
 OQHiI98j9Wsog8CQJ6d/sldtLCDJa8UIANpLtIOMFNz++BAM2rc=
 =zDGP
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-01-rc4-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-01-rc4 (2)

Use CONFIG_EFI_LOADER=n for ARM11 except for the Raspberry Pi and the
Raspberry Pi Zero.
2019-11-23 10:20:18 -05:00
Jagan Teki
3d3b83a573 gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUM
Add 0x330c for rk3399 gadget product number.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
6b7ebff001 usb: dwc3: Add phy interface for dwc3_uboot
U-Boot has two different variants of dwc3 initializations,
- with dm variant gadget, so the respective dm driver would
  call the dwc3_init in core.
- with non-dm variant gadget, so the usage board file would
  call dwc3_uboot_init in core.

The driver probe would handle all respective gadget properties
including phy interface via phy_type property and then trigger
dwc3_init for dm-variant gadgets.

So, to support the phy interface for non-dm variant gadgets,
the better option is dwc3_uboot_init since there is no
dedicated controller for non-dm variant gadgets.

This patch support for adding phy interface like 8/16-bit UTMI+
code for dwc3_uboot.

This change used Linux phy.h enum list, to make proper code
compatibility.

Cc: Marek Vasut <marex@denx.de>
Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
35172ac02f fastboot: rockchip: Fix rk3328 default mmc device
Technically the default mmc device for fastboot would
use eMMC if the board support for it.

Rockchip platform access device 0 for eMMC so, use the
same device number for rk3328.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
a9af59a30a fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV]
Select CONFIG_FASTBOOT_FLASH, CONFIG_FASTBOOT_FLASH_MMC_DEV
for rockchip SoC plaforms in fastboot Kconfig file instead
of defined it in board defconfig.

This eventually drop the explicit configs defined in
supporting board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
b032061405 gadget: rockchip: Add rk3128 USB_GADGET_PRODUCT_NUM
Add 0x310c for rk3128 gadget product number.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
132b012ede gadget: rockchip: USB_GADGET_PRODUCT_NUM
Rockchip support differnet or common gadget product number
between Rockchip SoCs like,

0x310a - rk3036
0x320a - rk3229, rk3288
0x330a - rk3328

So, select them on Kconfig based on platform specific
config defined.
   
This eventually drop the explicit configs defined in
supporting board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
89cbceb388 gadget: Select USB_GADGET_VENDOR_NUM for rockchip
Gadget vendor number, 0x2207 is common across all platfroms
supported in Rockchip SoC.

So, select the same number globally, if ARCH_ROCKCHIP.

This eventually drop the explicit configs defined in supported
board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
89e311d494 gadget: Select USB_GADGET_MANUFACTURER for rockchip
Select the gadget manufacturer as 'Rockchip' for
all rockchip platform SoC's.

This eventually drop the explicit defined added
on supported board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Vasily Khoruzhick
e82692ab32 power: fan53555: fix fan53555_regulator_set_value
fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits()
instead of its parent (pmic). As result u-boot crashes when you try to
set voltage on fan53555 regulator

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Vasily Khoruzhick
c9fca5ec88 rockchip: i2c: don't sent stop bit after each message
That's not correct and it breaks SMBUS-style reads and and writes for
some chips (e.g. SYR82X/SYR83X).

Stop bit should be sent only after the last message.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Vasily Khoruzhick
5ef1e02e99 power: fan53555: add support for Silergy SYR82X and SYR83X
SYR82X and SYR83X are almost identical to FAN53555, the only difference
is different die ID and revision, voltage ranges and steps.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Kever Yang
d8765e2422 Kconfig: Enable building of u-boot.itb on Rockchip platform
For all the Rockchip SoCs with SPL_LOAD_FIT enable, we need to build
u-boot.itb with U-Boot proper and ATF/OPTEE.

All the Rockchip boards with SPL_LOAD_FIT now supports FIT generator to
get ATF/OPTEE binary path from environment and pass the build even if no
ATF/OPTEE binary exist, so we can enable this feature for the rockchip
platform.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Kever Yang
5561a9a229 rockchip: lion-rk3368: Migrate to use common FIT generator
The RK3368 lion board ATF can use bl31.elf like RK3399 and get the FIT
source with generic FIT generator script at:
arch/arm/mach-rockchip/make_fit_atf.py

And then we can use 'BL31' environment to get the path of bl31.elf
instead of copy it into U-Boot folder.

CC: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Kever Yang
65325fba5a rockchip: Convert to use FIT generator for optee
Use generator script so that we can use environment for TEE source.
$TEE for tee.bin, and if file not exist, the script can report a warning,
and meke the build success without a error.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Heinrich Schuchardt
b7cdecfc19 efi_loader: default EFI_LOADER=n on ARM11
Some of the ARM11 boards have tight limits on the size of U-Boots. Hence
use EFI_LOADER=n as default on ARM11.

Set EFI_LOADER=y for the Raspberry Pi and Raspberry Pi Zero as these boards
have sufficient storage on the SD card.

Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-23 09:19:31 +01:00
Tom Rini
47b48fe186 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Assorted fixes
2019-11-22 10:41:46 -05:00
Tom Rini
71d96eb99e Merge branch 'master' of git://git.denx.de/u-boot-sh
- Assorted Gen3 fixes
2019-11-22 10:24:14 -05:00
Tom Rini
c59afcff8a Merge branch 'master' of git://git.denx.de/u-boot-usb
- Fix some possible alignment issues
2019-11-22 10:20:56 -05:00
Ooi, Joyce
0c14bb5ad3 arm: socfpga: stratix10: Add alias for gmac0 in S10 dts
Add 'ethernet0' as alias for 'gmac0' in S10 device tree.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-22 03:08:12 +01:00
Ooi, Joyce
7dad444c76 arm: dts: Stratix10: change pad skew values for EMAC0 PHY driver
The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA
drive strength has caused CE test to fail. This requires changes on the
pad skew for EMAC0 PHY driver. Based on several measurements done, Tx
clock does not require the extra 0.96ns delay which was needed in
Arria10.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-22 03:08:12 +01:00
Simon Goldschmidt
7dc0ac6015 usb: dwc2: fix possible alignment issues
Since upgrading to gcc9, warnings are issued:
"taking address of packed member of ‘...’ may result in an unaligned
pointer value"

Fix this by converting dwc2_fifo_read to use unaligned access since packed
structures may be on an unaligned address, depending on USB hardware.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-22 01:25:40 +01:00
Simon Goldschmidt
616ebd8b9c usb: composite: fix possible alignment issues
Since upgrading to gcc9, warnings are issued:
"taking address of packed member of ‘...’ may result in an unaligned
pointer value"

Fix this by converting two functions to use unaligned access since packed
structures may be on an unaligned address, depending on USB hardware.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-22 01:25:36 +01:00
Joe Hershberger
2800540d10 Update MAINTAINERS to include environment files
To be maintained by me (Joe) and reviewed by Wolfgang Denk when
available.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-21 08:36:40 -05:00
Tom Rini
32a238df79 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-21 08:30:45 -05:00
Tom Rini
f0fcab6f8e Merge branch '2019-11-20-env-migration'
- Migrate a number of common environment related options to Kconfig
2019-11-21 08:25:53 -05:00
Tom Rini
a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00
Tom Rini
8160c38ca1 T1042RDB_PI_NAND_SECURE_BOOT: Guard t104xrdb SPL env code
We can only configure and set the environment in SPL when we have a
particular environment location set that is not "nowhere" like it is in
SECURE_BOOT designs.  Update the code to reflect that.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-20 18:31:24 -05:00
Tom Rini
dbcb4dae36 fsl: layerscape: guard *env_sf_get_env_addr() on CONFIG_ENV_IS_IN_SPI_FLASH
These functions can only be built and used when we have
ENV_IS_IN_SPI_FLASH, use that as a guard.

Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20 18:31:24 -05:00
Tom Rini
a8992e788a env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check
We have CONFIG_ENV_SIZE_IS_REDUND but don't really use it.  We have one
board where we can simply multiple CONFIG_ENV_SIZE by two for the same
result.  The other place where we could but were not previously using
this is for where env_internal.h checks for if we should set
ENV_IS_EMBEDDED.  This seems like the most likely use, historically, of
the variable, but it was not used.  Add logic to check for this now.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-20 18:31:24 -05:00
Tom Rini
3eee45d936 smart-gateway-mt7688: Rework build time check for overwriting factory data
The board file has a build time check to ensure that we do not have the
redundant environment overwriting the factory data.  However, using the
symbol CONFIG_ENV_SIZE_REDUND isn't strictly needed as that is always
the same as CONFIG_ENV_SIZE.  Use CONFIG_ENV_SIZE instead so that we can
later drop CONFIG_ENV_SIZE_REDUND.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-11-20 18:31:23 -05:00
Marek Vasut
48f23dd6a4 ARM: socfpga: Fix default mtdparts
The default mtdparts value grew a trailing zero during the Kconfig
conversion. This is because the mtdparts value in the header file
had a \0 at the end, which got misconverted into plain 0 instead of
being dropped.

Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 43ede0bca7 ("Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT")
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-20 23:46:16 +01:00
Simon Goldschmidt
64c7c8c91c spi: cadence_qspi: support DM_CLK
Support loading clk speed via DM instead of requiring ad-hoc code.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 23:46:11 +01:00
Simon Goldschmidt
caaaf62ac8 timer: dw-apb: add reset handling
To use this DM timer on socfpga as system tick, it needs to take itself
out of reset.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 22:32:00 +01:00
Simon Goldschmidt
26fb85f4ab socfpga: fix include guard in misc.h (arch vs. global)
The file arch/arm/mach-socfpga/include/mach/misc.h used the same include
guard as the global include/misc.h.

Fix this by giving the arch file an arch prefix.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Simon Goldschmidt
aacd7b922f ddr: socfpga: gen5: constify altera_gen5_sdram_ops
Make the function pointer struct const, as it does not need to be
writable. This doesn't really change anything other than moving this
variable to a different section. No functional change.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Ley Foon Tan
086269e17d configs: Stratix10: Disable CONFIG_SPL_USE_TINY_PRINTF
Commit 2a51e16bd5 ("configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default")
enable USE_TINY_PRINTF by default, disable it for Stratix10.

Resync with savedefconfig.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Ley Foon Tan
9184590d9a arm: dts: Stratix10: Fix memory node address and size cells
Add #address-cells and #size-cells to memory node to fix incorrect memory
size decoding in recent Uboot version.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Tom Rini
ad38de2093 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- Fix CONFIG_AHCI related build warning for P2041, P3041, P5040, T102x,
  T104x, T4240 platforms
2019-11-20 15:38:51 -05:00
Tom Rini
8d8ee47e03 env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not.  In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20 12:24:50 -05:00
Tom Rini
30b59dd8ba input: Move input.o to be built only in some cases
We only need to build and link input.o when we have any of
CONFIG_KEYBOARD, CONFIG_DM_KEYBOARD (and SPL/TPL variants) or
CONFIG_TEGRA_KEYBOARD set.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-19 17:43:04 -05:00
Tom Rini
99f9682cae Pull request for UEFI sub-system for efi-2020-01-rc4
Fix errors due to unaligned memory access:
 * disable UEFI except for ARMv8, ARMv7, ARM11
 * enable unaligned access support on ARM11
 
 Remove an unused function.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl3UI+4ACgkQxIHbvCwF
 GsTyOg//ePSkbU7hP0xsvprhJTlckHQLAfZlvekbH4niAhiQXy/QlH3RFBjMQeN4
 h8PXNb564PLGNnMyC8TKQ6E2AaWE1AXMwqKCUd1KdFdnsxsTunUCLZL31J1q7BfY
 s+/vJey1LF9FGPE7Mq9YZZMdo2VjSBqCgh5PycL40hp1BksdUX0WvgIthxB1XQxk
 LPTPoWdNiOikNTLheSOPozR96Jh0YhGgXJ1tA2jVXiS9rpyGz+rhMpgVSgvQDPgp
 rTOijVmhSZefL6/EfOTravxSBhhjt9nCDlx76SN8Oiv3WDgcmkSdhUcwAgFpkAOF
 VW4ujDVezc6EIamJoRPFuFS/tfYD/jBwN3Gyh6WJeHZA3pFZUJGIe5OjT/A39u7V
 Ynpa1LPjX7Z212U59bUg5qspSBHVneBcHQBK+e3XDkoYE13TXf7OrDigdWUfEWae
 EdPOrNU8dg2UaiJeMgLNFJBMAN+5txfMP/59BBo4DtObHcAPX/z3rVbij82ubKCq
 kgq26g1YN22uWarXVYGd3NwODScBphFuuIKZ+irhtL18m7wSG6Y4kCQbZo+CtJcj
 Ida/PILfiADja0/yzFqbuHhdiLdA6UVbiqhsykOkuo2GLn4oCG0rNBohDERRop/U
 HybGc2oFnXvbsxsY9fYnzRUXxxgJWDxfkv9MjD88X9To9d/SyB0=
 =ygux
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-01-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-01-rc4

Fix errors due to unaligned memory access:
* disable UEFI except for ARMv8, ARMv7, ARM11
* enable unaligned access support on ARM11

Remove an unused function.
2019-11-19 17:42:46 -05:00
Vignesh Raghavendra
e5521b1c6f usb: cdns3: Fix include file path
xhci.h has now been moved to include/usb/ directory. Therefore, update the
path in the Cadence USB drivers.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-19 16:07:14 +01:00
Heinrich Schuchardt
38064ee04c efi_loader: enable EFI_LOADER on arm1136 and arm1176
With an implementation for allow_unaligned() available for arm1136 and
arm1176 UEFI can be supported on these architectures.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-19 12:10:22 +01:00