Commit graph

39 commits

Author SHA1 Message Date
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Andre Przywara
b8d4fad3bc net: rtl8169: remove unneeded definition
The rtl8169_intr_mask variable isn't used anywhere in the code, so
just remove it to avoid a GCC 6.2 compiler warning.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-04 13:55:01 -05:00
Peter Chubb
7377647a36 rtl8169: fix cache misalignment message on transmit.
The call to flush cache on the transmit buffer was misplaced (for very
short packets) and asked to flush less than a cacheline.

Move the flush cache call to after a short packet has been padded
to minimum length (so the padding is flushed too), and round the size
up to a cacheline.

Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13 12:25:29 -05:00
Oleksandr Tymoshenko
4c64c4db3b net: rtl8169: Fix return value for rtl_send_common
Return value of rtl_send_common propogates unmodified all the way
up to eth_send and further to API consumer if CONFIG_API is enabled.
Previously rtl_send_common returned number of bytes sent on success
which was erroneouly detected as error condition by API consumers
that checked for operation success by comparing return value with 0.

Switch rtl_send_common to use common convention: return 0 on success
and negative value for failure.

Cc: Stephen Warren <swarren@nvidia.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-07-06 10:45:11 -05:00
Stephen Warren
dad7b74045 net: rtl8169: fix switching between adapters
The rtl8169 driver uses a global variable to store the register address
of the adapter being operated upon. This is updated to point at the
correct adapter when sending or receiving a packet, or shutting down the
adapter, but not when initializing the adapter. Consequently, switching
between different adapters within the same U-Boot runtime does not work
correctly since the driver programs the wrong registers during
rtl8169_eth_start() -> rtl8169_common_start() -> rtl8169_hw_start().

Note that since rtl8169_eth_stop() does set the global variable, the
second consecutive attempt to use the "new" adapter did work even before
this patch, because each time network usage is shut down, the network
core calls stop, which sets the variable so that the next start does
actually initialize the hardware, and the adapter works.

Equally, rtl8169_eth_probe() calls rtl_init() which sets the global, so
if using only a single device, or if picking the "right" device (based on
probe order) when multiple devices are present, ioaddr will already be set
correctly from the get-go, so the issue does not occur.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-06-21 17:01:51 -05:00
Bin Meng
dbe253861a net: rtl8169: Fix build error when DEBUG is on
When DEBUG_RTL8169 is on, a build error occurs in function
'rtl_init': error: 'dev' undeclared. Fix this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-27 09:12:25 -04:00
Simon Glass
552ddbe3ce dm: net: Convert rtl8169 to use DM PCI API
Update this driver to use the proper driver-model PCI API functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-12 10:19:09 -07:00
Simon Glass
21ccce1ba5 dm: pci: Add a dm_ prefix to pci_get_bdf()
Most driver model PCI functions have a dm_ prefix. At some point, when the
old code is converted to driver model and the old functions are removed, we
will drop that prefix.

For consistency, we should use the dm_ prefix for all driver model
functions. Update pci_get_bdf() accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Stephen Warren
f3ba55235d net: rtl8169: Build warning fixes for 64-bit
Casting from dev->priv to pci_dev_t changes the value's size on a 64-bit
system. This causes the compiler to complain about casting a pointer to an
integer of a different (smaller) size. To avoid this, cast to an integer
of matching size first, then perform an int->int cast to perform the size
change. This signals explicitly that we do want to change the size, and
avoids the compiler warning. This is legitimate since we know the pointer
actually stores a small integer, not a pointer value.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-29 14:05:47 -05:00
Simon Glass
cf92e05c01 Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header
Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 17:15:20 -04:00
Simon Glass
d0a5a0b2d8 dm: eth: Add driver-model support to the rtl8169 driver
This driver is used by the Intel Minnowmax board. Convert it to driver model
so it can use the new Ethernet implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:39 -06:00
Thierry Reding
744152f8cf net: rtl8169: Build warning fixes for 64-bit
Turn ioaddr into an unsigned long rather than a sized 32-bit variable.
While at it, fix a couple of pointer to integer cast size mismatch
warnings by casting through unsigned long going from pointers to
integers and vice versa.

Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-20 17:57:11 -05:00
Joe Hershberger
1fd92db83d net: cosmetic: Fix var naming net <-> eth drivers
Update the naming convention used in the network stack functions and
variables that Ethernet drivers use to interact with it.

This cleans up the temporary hacks that were added to this interface
along with the DM support.

This patch has a few remaining checkpatch.pl failures that would be out
of the scope of this patch to fix (drivers that are in gross violation
of checkpatch.pl).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Thierry Reding
cc0856cd14 net: rtl8169: Add support for RTL-8168/8111g
This network interface card is found on the NVIDIA Jetson TK1.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-12-18 13:21:41 -07:00
Thierry Reding
d58acdcbfb net: rtl8169: Use non-cached memory if available
To work around potential issues with explicit cache maintenance of the
RX and TX descriptor rings, allocate them from a pool of uncached memory
if the architecture supports it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-12-18 13:21:41 -07:00
Thierry Reding
dad3ba0f0b net: rtl8169: Properly align buffers
RX and TX descriptor rings should be aligned to 256 byte boundaries. Use
the DEFINE_ALIGN_BUFFER() macro to define the buffers so that they don't
have to be manually aligned later on. Also make sure that the buffers do
align to cache-line boundaries in case the cache-line is higher than the
256 byte alignment requirements of the NIC.

Also add a warning if the cache-line size is larger than the descriptor
size, because the driver may discard changes to descriptors made by the
hardware when requeuing RX buffers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-12-18 13:21:41 -07:00
Thierry Reding
c94bbfdf51 net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER
According to the top-level README file, this configuration setting can
be used to override the number of receive buffers that an ethernet NIC
uses.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-12-18 13:21:41 -07:00
Thierry Reding
5d9f423ddb rtl8169: Defer network packet processing
When network protocol errors occur (such as a file not being found on a
TFTP server), the processing done by the NetReceive() function will end
up calling the driver's .halt() implementation. However, after that the
device no longer has access to the memory buffers and will cause errors
such as this in the rtl_recv() function when trying to hand descriptors
back to the device:

	pci_hose_bus_to_phys: invalid physical address

This can be fixed by deferring processing of network packets until the
descriptors have been handed back. That way rtl_halt() tearing down
network buffers is not going to prevent access to the buffers.

Reported-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-09-16 12:23:45 -04:00
Thierry Reding
2287286be4 net: rtl8169: Add support for RTL8168d/8111d
This chip is compatible with the existing driver, except that it uses
BAR2 instead of BAR1 for the I/O memory region. Using this patch I can
use the PCIe ethernet interface on the CompuLab Trimslice to boot from
the network.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276477
2013-11-22 17:03:21 -06:00
Thierry Reding
22ece0e2e2 net: rtl8169: Improve cache maintenance
Instead of directly calling the low-level invalidate_dcache_range() and
flush_cache() functions, provide thin wrappers that take into account
alignment requirements.

While at it, fix a case where the cache was flushed but should have been
invalidated, two cases where the buffer data was flushed instead of the
descriptor and a missing cache invalidation before reading the packet
data that the NIC just wrote to memory.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276474
2013-11-22 17:03:21 -06:00
Thierry Reding
65a6691ed3 net: rtl8169: Add support for RTL8168evl/8111evl
This chip is compatible with other RTL8168 chips and can be found on the
NVIDIA Cardhu and Beaver boards.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276475
2013-11-22 16:50:53 -06:00
Thierry Reding
7a36b9c1ac net: rtl8169: Fix format string
currticks() is defined as get_timer(0), which returns an unsigned long,
so use %lu instead of %d to print the result.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276473
2013-11-22 16:50:53 -06:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Joe Hershberger
d1527b55f5 drivers/net/rtl8169.c: Fix compile warning
Fix this:
rtl8169.c: In function 'rtl8169_initialize':
rtl8169.c:907:13: warning: assignment from incompatible pointer type

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-22 23:17:52 -05:00
Wolfgang Denk
afb92010b2 drivers/net/rtl8169.c: Fix GCC 4.6 build warning
Fix:
rtl8169.c: In function 'rtl_init':
rtl8169.c:742:13: warning: variable 'printed_version' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07 22:18:17 +01:00
Nobuhiro Iwamatsu
f4eaef7b2e net: rtl8169: Add initialized eth_device structure
rtl8169 does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:37 +01:00
Yoshihiro Shimoda
d65e34d125 rtl8169: fix PCI system memory address
When PCI device use system memory, some PCI host controller should be
set physical memory address.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
Yoshihiro Shimoda
d4c02e6f5d rtl8169: fix cache coherency problem
Fix the problem that cannot access actual data when CPU data cache enabled.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-04-28 00:18:10 +02:00
Mike Frysinger
d3f871482f drivers/net/: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The drivers that get converted here:
	3c589
	4xx_enet
	dc2114x
	dm9000x
	enc28j60
	fsl_mcdmafec
	ks8695eth
	mcffec
	rtl8019
	rtl8169
	s3c4510b_eth
	xilinx_emac
	xilinx_emaclite

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Rolf Offermanns <rof@sysgo.de>
CC: Stefan Roese <sr@denx.de>
CC: Sascha Hauer <saschahauer@web.de>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
CC: Greg Ungerer <greg.ungerer@opengear.com>
CC: Xue Ligong <lgxue@hotmail.com>
CC: Masami Komiya <mkomiya@sonare.it>
CC: Curt Brune <curt@cucy.com>
CC: Michal SIMEK <monstr@monstr.eu>
2009-03-20 22:39:10 +01:00
Ben Warren
02d69891d9 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
Affected boards:
	linkstation
	r7780mp

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Yoshihiro Shimoda
db70b84329 rtl8169: add support for RTL8110SCL
This patch fixes a problem that RTL8110SCL started transfer
with an incorrect memory address.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-18 23:11:07 -07:00
Wolfgang Denk
06c53beae1 Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-10 13:16:09 +02:00
Shinya Kuribayashi
3b904ccb93 net: Conditional COBJS inclusion of network drivers
Replace COBJS-y with appropriate driver config names.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-09 23:21:05 -07:00
Guennadi Liakhovetski
dd5748bcd6 rtl8169: fix compiler warnings
Fix multiple compiler warnings related to argument type mismatch.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-04-28 20:42:55 +02:00
Nobuhiro Iwamatsu
d75469d48c net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
When rtl_recv() of rtl8169 is called, OWNbit of status register
is not enable occasionally.
rtl_recv() doesn't work normally when the driver doesn't do
appropriate processing.
This patch fix this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-08 10:59:27 +01:00
Kumar Gala
3cfb0c51b2 Remove duplicate defines for ARRAY_SIZE
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-14 00:43:02 +01:00
Ben Warren
422b1a0160 Fix Ethernet init() return codes
Change return values of init() functions in all Ethernet drivers to conform
to the following:

    >=0: Success
    <0:  Failure

All drivers going forward should return 0 on success.  Current drivers that
return 1 on success were left as-is to minimize changes.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-By: Timur Tabi <timur@freescale.com>
2008-01-10 01:06:02 +01:00
Guennadi Liakhovetski
6a5e1d75bf Fix endianness conversions in rtl8169 driver
It is unclear on what platforms this driver has been tested, since
noone up to now defines CONFIG_RTL8169 in the board configuration
header. Now it has been fixed for a big-endian mpc8241 based
linkstation platform. This patch presents the necessary endianness
conversion fixes.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-01-09 14:37:01 +01:00
Jean-Christophe PLAGNIOL-VILLARD
2439e4bfa1 drivers/net : move net drivers to drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 18:35:17 +01:00
Renamed from drivers/rtl8169.c (Browse further)