Commit graph

800 commits

Author SHA1 Message Date
Marek Szyprowski
bd8fbd8a13 ext4: add support for filesystems without JOURNAL
JOURNAL is optional for EXT4 (and EXT3) filesystems, so add support for
skipping it. This fixes corrupting EXT4 volumes without JOURNAL after
using uboot's 'ext4write' command.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-07-18 11:31:24 -04:00
Marek Szyprowski
1c9f8f6412 ext4: fix calculating inode blkcount for non-512 blocksize filesystems
The block count entry in the EXT4 filesystem disk structures uses
standard 512-bytes units for most of the typical files. The only
exception are HUGE files, which use the filesystem block size, but those
are not supported by uboot's EXT4 implementation anyway. This patch fixes
the EXT4 code to use proper unit count for inode block count. This fixes
errors reported by fsck.ext4 on disks with non-standard (i.e. 4KiB, in
case of new flash drives) PHYSICAL block size after using 'ext4write'
uboot's command.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-07-18 11:31:24 -04:00
Mian Yousaf Kaukab
ee88eacbdd fs: do_load: pass device path for efi payload
fatload command can be used to load the EFI payload since EFI system
partition is always a FAT partition. Call into EFI code from do_load()
to set the device path from which the last binary was loaded. An EFI
application like grub2 can’t find its configuration file without the
device path set.

Since device path is now set in do_load() there is no need to set it
in do_load_wrapper() for the load command.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20 22:26:20 +00:00
AKASHI Takahiro
cd2d727fff fs: fat: allocate a new cluster for root directory of fat32
Contrary to fat12/16, fat32 can have root directory at any location
and its size can be expanded.
Without this patch, root directory won't grow properly and so we will
eventually fail to add files under root directory. Please note that this
can happen even if you delete many files as deleted directory entries
are not reclaimed but just marked as "deleted" under the current
implementation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28 18:55:09 -04:00
AKASHI Takahiro
9c709c7b41 fs: fat: flush a directory cluster properly
When a long name directory entry is created, multiple directory entries
may be occupied across a directory cluster boundary. Since only one
directory cluster is cached in a directory iterator, a first cluster must
be written back to device before switching over a second cluster.

Without this patch, some added files may be lost even if you don't see
any failures on write operation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28 18:55:08 -04:00
AKASHI Takahiro
a9f6706cf0 fs: fat: write to non-cluster-aligned root directory
With the commit below, fat now correctly handles a file read under
a non-cluster-aligned root directory of fat12/16.
Write operation should be fixed in the same manner.

Fixes: commit 9b18358dc0 ("fs: fat: fix reading non-cluster-aligned
       root directory")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28 18:55:08 -04:00
Andrew F. Davis
d0cd30eb81 fs: fat: Fix possible double free of fatbuf
fat_itr_root() allocates fatbuf so we free it on the exit path, if
the function fails we should not free it, check the return value
and skip freeing if the function fails.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-05-28 13:57:52 -04:00
Heinrich Schuchardt
7b437807ee fs: fat: correct file name normalization
File names may not contain control characters (< 0x20).
Simplify the coding.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28 13:57:52 -04:00
Marek Behún
53290e6efd fs: btrfs: add zstd decompression support
This adds decompression support for Zstandard, which has been included
in Linux btrfs driver for some time.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-05 08:48:50 -04:00
Marek Behún
cd22e34c11 fs: btrfs: fix btrfs methods return values on failure
The btrfs implementation methods .ls(), .size() and .read() returns 1 on
failure, but the command handlers expect values <0 on failure.

For example if given a nonexistent path, the load command currently
returns success, and hush scripting does not work.

Fix this by setting return values of these methods to -1 instead of 1 on
failure.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03 07:30:31 -04:00
Marek Behún
881e020958 fs: btrfs: Do not print mount fail message when not btrfs filesystem
Other filesystem drivers don't do this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03 07:23:17 -04:00
Tom Rini
6aebc0d11a Revert "fs: btrfs: fix false negatives in ROOT_ITEM search"
Per Pierre this change shouldn't have been applied as it was superseded
by "fs: btrfs: fix btrfs_search_tree invalid results" which is also
applied now as 1627e5e598.

This reverts commit 633967f981.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-27 11:35:44 -04:00
Pierre Bourdon
1627e5e598 fs: btrfs: fix btrfs_search_tree invalid results
btrfs_search_tree should return the first item in the tree that is
greater or equal to the searched item.

The search algorithm did not properly handle the edge case where the
searched item is higher than the last item of the node but lower than
the first item of the next node. Instead of properly returning the first
item of the next node, it was returning an invalid path pointer
(pointing to a non-existent item after the last item of the node + 1).

This fixes two issues in the btrfs driver:
  - Looking for a ROOT_ITEM could fail if it was the first item of its
    leaf node.
  - Iterating through DIR_INDEX entries (for readdir) could fail if the
    first DIR_INDEX entry was the first item of a leaf node.

Signed-off-by: Pierre Bourdon <delroth@gmail.com>
Cc: Marek Behun <marek.behun@nic.cz>
2019-04-26 17:53:16 -04:00
Ismael Luceno Cortes
423eba241d fs: fat: Build only if CONFIG_FS_FAT=y
Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
2019-04-26 17:53:16 -04:00
Pierre Bourdon
633967f981 fs: btrfs: fix false negatives in ROOT_ITEM search
ROOT_ITEMs in btrfs are referenced without knowing their actual "offset"
value. To perform these searches using only two items from the key, the
btrfs driver uses a special "btrfs_search_tree_key_type" function.

The algorithm used by that function to transform a 3-tuple search into a
2-tuple search was subtly broken, leading to items not being found if
they were the first in their tree node.

This commit fixes btrfs_search_tree_key_type to properly behave in these
situations.

Signed-off-by: Pierre Bourdon <delroth@gmail.com>
Cc: Marek Behun <marek.behun@nic.cz>
2019-04-26 17:53:15 -04:00
Benjamin Lim
febbc58331 Fix ext4 block group descriptor sizing
Ext4 allows for arbitrarily sized block group descriptors when 64-bit
addressing is enabled, which was previously not properly supported. This
patch dynamically allocates a chunk of memory of the correct size.

Signed-off-by: Benjamin Lim <jarsp.ctf@gmail.com>
2019-04-09 20:04:06 -04:00
Anssi Hannula
9b18358dc0 fs: fat: fix reading non-cluster-aligned root directory
A FAT12/FAT16 root directory location is specified by a sector offset and
it might not start at a cluster boundary. It also resides before the
data area (before cluster 2).

However, the current code assumes that the root directory is located at
a beginning of a cluster, causing no files to be found if that is not
the case.

Since the FAT12/FAT16 root directory is located before the data area
and is not aligned to clusters, using unsigned cluster numbers to refer
to the root directory does not work well (the "cluster number" may be
negative, and even allowing it be signed would not make it properly
aligned).

Modify the code to not use the normal cluster numbering when referring to
the root directory of FAT12/FAT16 and instead use a cluster-sized
offsets counted from the root directory start sector.

This is a relatively common case as at least the filesystem formatter on
Win7 seems to create such filesystems by default on 2GB USB sticks when
"FAT" is selected (cluster size 64 sectors, rootdir size 32 sectors,
rootdir starts at half a cluster before cluster 2).

dosfstools mkfs.vfat does not seem to create affected filesystems.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Reviewed-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Tested-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
2019-04-09 20:04:04 -04:00
Gero Schumacher
1c48fda3e5 fs: ext4: Problem with ext4load and sparse files
Hi,

when I try to load a sparse file via ext4load, I am getting the error message
'invalid extent'

After a deeper look in the code, it seems to be an issue in the function ext4fs_get_extent_block in fs/ext4/ext4_common.c:

The file starts with 1k of zeros. The blocksize is 1024. So the first extend block contains the following information:

eh_entries: 1
eh_depth: 1
ei_block 1

When the upper layer (ext4fs_read_file) asks for fileblock 0, we are running in the 'invalid extent' error message.
For me it seems, that the code is not prepared for handling a sparse block at the beginning of the file. The following change, solved my problem:

I am really not an expert in ext4 filesystems. Can somebody please have a look at this issue and give me a feedback, if I am totally wrong or not?
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
aaa12157c7 fs: Add a new command to create symbolic links
The command line is:
ln <interface> <dev[:part]> target linkname

Currently symbolic links are supported only in ext4 and only if the option
CMD_EXT4_WRITE is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
5efc0686ee fs: ext4: Add support for the creation of symbolic links
Re-use the functions used to write/create a file, to support creation of a
symbolic link.
The difference with a regular file are small:
- The inode mode is flagged with S_IFLNK instead of S_IFREG
- The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG
- Instead of storing the content of a file in allocated blocks, the path
to the target is stored. And if the target's path is short enough, no block
is allocated and the target's path is stored in ext2_inode.b.symlink

As with regulars files, if a file/symlink with the same name exits, it is
unlinked first and then re-created.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix ext4 env code]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:03:30 -04:00
Jean-Jacques Hiblot
b000180b0f fs: ext4: constify the buffer passed to write functions
There is no need to modify the buffer passed to ext4fs_write_file().
The memset() call is not required here and was likely copied from the
equivalent part of the ext4fs_read_file() function where we do need it.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Stephen Warren
d5aee659f2 fs: ext4: cache extent data
When a file contains extents, U-Boot currently reads extent-related data
for each block in the file, even if that data is located in the same
block each time. This significantly slows down loading of files that use
extents. Implement a very dumb cache to prevent repeatedly reading the
same block. Files with extents now load as fast as files without.

Note: There are many cases where read_allocated_block() is called. This
patch only addresses one of those places; all others still read redundant
data in any case they did before. This is a minimal patch to fix the
load command; other cases aren't fixed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-04-09 15:34:15 -04:00
Eran Matityahu
734b080e78 mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit
Before printk.h was introduced and MTDDEBUG was removed,
pr_crit() was calling MTDDEBUG(), which was since then
replaced by the current pr_debug().

pr_debug is more appropriate here.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09 07:46:42 +02:00
Sébastien Szymanski
2e7365518a fs: ext4: do not write on filesystem with metadata_csum feature
U-Boot doesn't support metadata_csum feature. Writing to filesystem with
metadata_csum feature makes the filesystem corrupted and unbootable by
Linux:

[    2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0)
[    2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0)
...
[    2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0)
[    2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0)
[    2.687920] JBD2: journal checksum error
[    2.691982] EXT4-fs (mmcblk0p2): error loading journal
[    2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74

Don't write to filesystem with meatadata_csum feature to not corrupt the
filesystem.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-03-22 12:15:24 -04:00
Heinrich Schuchardt
7274b7638a fs: fat: fix link error when building with DEBUG=1
When compiling with DEBUG=1 an error
fs/fat/fat_write.c:831: undefined reference to `__aeabi_ldivmod'
occurred.

We should use do_div() instead of the modulus operator.

filesize and cur_pos cannot be negative. So let's use u64 to avoid
warnings.

Fixes: cb8af8af5b ("fs: fat: support write with non-zero offset")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-28 14:21:46 -05:00
Tien Fong Chee
e48485f5e4 fs: fat: Reduce default max clustersize 64KiB from malloc pool
Release cluster block immediately when no longer use would help to reduce
64KiB memory allocated to the memory pool.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19 08:55:43 -05:00
Tien Fong Chee
8537874a65 fs: fat: dynamically allocate memory for temporary buffer
Drop the statically allocated get_contents_vfatname_block and
dynamically allocate a buffer only if required. This saves
64KiB of memory.

Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19 08:55:43 -05:00
Marek Vasut
e531c6731b fs: ext4: Unmount FS in do_fs_type()
Unlike other generic FS accessors, fs_get_info() does not call fs_close()
at the end of it's operation. Thus, using fs_get_info() in do_fs_type()
without calling fs_close() causes potential memory leak by creating new
filesystem structures on each call of do_fs_type().

The test case to trigger this problem is as follows. It is required to
have ext4 filesystem on the first partition of the SDMMC device, since
ext4 requires stateful mount and causes memory allocation.
=> while true ; do mmc rescan ; fstype mmc 1 ; done
Eventually, the mounting of ext4 will fail due to malloc failures
and the filesystem will not be correctly detected.

This patch fixes the problem by adding the missing fs_close().

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2019-02-09 11:08:40 +01:00
Simon Goldschmidt
9cc2323fee lmb: handle more than one DRAM BANK
This fixes the automatic lmb initialization and reservation for boards
with more than one DRAM bank.

This fixes the CVE-2018-18439 and -18440 fixes that only allowed to load
files into the firs DRAM bank from fs and via tftp.

Found-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-02 08:19:17 -05:00
Tien Fong Chee
cafc429fa8 spl: fat/fs: Add control to build FS EXT4 in SPL
CONFIG_SPL_FS_EXT4 can be used to include/exclude the FS EXT4 from
SPL build. Excluding the FS EXT4 from SPL build can help to save 20KiB
memory.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
f4b4092474 spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both
obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be
used to control the build in both SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
d8c3ea9982 spl: fat/fs: Add option to include/exclude FAT write build in SPL
Most of the time SPL only needs very simple FAT reading, so having
CONFIG_IS_ENABLED(FAT_WRITE) to exclude it from SPL build would help
to save 64KiB default max clustersize from memory.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Tien Fong Chee
0c3a9ed409 spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Simon Goldschmidt
aa3c609e2b fs: prevent overwriting reserved memory
This fixes CVE-2018-18440 ("insufficient boundary checks in filesystem
image load") by using lmb to check the load size of a file against
reserved memory addresses.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16 16:37:05 -05:00
Tom Rini
d3035b8560 Revert "fs: fat: assign rootdir sector when accessing root directory"
This particular commit is causing a regression on stih410-b2260 and
other platforms when reading from FAT16.  Noting that I had rebased the
original fix from Thomas onto then-current master, there is also
question from Akashi-san if the change is still needed after other FAT
fixes that have gone in.

This reverts commit a68b0e11ea.

Reported-by: Patrice Chotard <patrice.chotard@st.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-11 10:15:42 -05:00
Bin Meng
d94bf13c85 fs: cbfs: Fix out of bound access during CBFS walking through
The call to file_cbfs_fill_cache() is given with the parameter
'start' pointing to the offset by the CBFS base address, but
with the parameter 'size' that equals to the whole CBFS size.
During CBFS walking through, it checks files one by one and
after it pass over the end of the CBFS which is 4GiB boundary
it tries to check files from address 0 and so on, until the
overall size the codes checked hits to the given 'size'.

Fix this by passing 'start' pointing to the CBFS base address.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-31 09:42:41 +08:00
Christian Gmeiner
9914c73261 fs: cbfs: remove wrong header validation
cbfs_fileheader.len indicates the content size of the file in the
cbfs, and it has nothing to do with cbfs_fileheader.offset which
is the starting address of the file in the cbfs.

Remove such check in file_cbfs_next_file(). Before this change
'cbfsinit' failed with 'Bad CBFS file'. After this change all cbfs
commands are working as expected.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
[bmeng: keep the necessary header sanity check]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-31 09:42:41 +08:00
Patrick Wildt
8b021bb956 fs: fix FAT name extraction
The long name apparently can be accumulated using multiple
13-byte slots.  Unfortunately we never checked how many we
can actually fit in the buffer we are reading to.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2018-12-06 23:26:31 -05:00
Patrick Wildt
cd80a4fe61 fs: check FAT cluster size
The cluster size specifies how many sectors make up a cluster.  A
cluster size of zero makes no sense, as it would mean that the
cluster is made up of no sectors.  This will later lead into a
division by zero in sect_to_clust(), so better take care of that
early.

The MAX_CLUSTSIZE define can reduced using a define to make some
room in low-memory system.  Unfortunately if the code reads a
filesystem with a bigger cluster size it will overflow the buffer.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2018-12-06 23:26:31 -05:00
AKASHI Takahiro
b0c78d8ffc fs: update fs_dev_part in fs_set_blk_dev_with_part()
As in the case of fs_set_blk_dev(), fs_set_blk_dev_with_part() should
maintain and update fs_dev_part whenever called.

Without this patch, a problem will come up when an efi binary associated
with efi's BOOTxxxx variable is invoked via "bootefi bootmgr".

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Thomas RIENOESSL
a68b0e11ea fs: fat: assign rootdir sector when accessing root directory
This fixes problems accessing drives formated under
Windows as FAT16.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
[trini: Rebase on top of f528c140c8]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-20 12:35:35 -05:00
Keerthy
48e2f0c966 fs: Makefile: Add fs.c under SPL for fs_loader
Add fs.c under SPL as well as it is needed for fs_loader

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add as obj-$(CONFIG_FS_LOADER) for non-SPL_FRAMEWORK builds]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16 16:52:00 -05:00
Paul Davey
e4aa10ba57 fs: ubifs: Fix UBIFS decompression on 64 bit
Add local size_t variable to crypto_comp_decompress as intermediate
storage for destination length to avoid memory corruption and incorrect
results on 64 bit targets.

This is what linux does for the various lz compression implementations.

Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
2018-11-07 08:49:27 +01:00
Tom Rini
819c80f528 fs: fat: Fix warning in normalize_longname()
As observed with clang:
fs/fat/fat_write.c:1024:13: warning: comparison of constant 128
      with expression of type 'char' is always false
      [-Wtautological-constant-out-of-range-compare]
                if ((0x80 <= c) && (c <= 0xff))
                     ~~~~ ^  ~
fs/fat/fat_write.c:1024:25: warning: comparison of constant 255
      with expression of type 'char' is always true
      [-Wtautological-constant-out-of-range-compare]
                if ((0x80 <= c) && (c <= 0xff))
                                    ~ ^  ~~~~

Fixes: 25bb9dab14 ("fs: fat: check and normalize file name")
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16 16:44:12 +02:00
Yevgeny Popovych
5b781cf08d fs: btrfs: Fix tree traversal with btrfs_next_slot()
When traversing slots in a btree (via btrfs_path) with btrfs_next_slot(),
we didn't correctly identify that the last slot in the leaf was reached
and we should jump to the next leaf.

This could lead to any kind of runtime errors or corruptions, like:
* file data not being read at all, or is read partially
* file is read but is corrupted
* (any) metadata being corrupted or not read at all, etc

The easiest way to reproduce this is to read a large enough file that
its EXTENT_DATA items don't fit into a single leaf.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
2018-10-08 14:45:02 -04:00
Heinrich Schuchardt
f105fe7bc5 fs: fat: fix set_cluster()
Avoid CoverityScan warning SIGN_EXTENSION by changing the type of
parameter size of set_cluster().

Avoid leaking stack content when writing an incomplete last sector.

Reported-by: Coverity (CID: 184096)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Heinrich Schuchardt
0d532e911c fs: fat: memory leak in fat_unlink()
Do not leak filename_copy in case of error.
Catch out of memory when calling strdup.

Reported-by: Coverity (CID: 184086)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Marek Vasut
c9795396ed fs: btrfs: Fix cache alignment bugs
The btrfs implementation passes cache-unaligned buffers into the
block layer, which triggers cache alignment problems down in the
block device drivers. Align the buffers to prevent this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Behun <marek.behun@nic.cz>
2018-09-30 13:00:37 -04:00
Heinrich Schuchardt
1c381cebb7 fs: fat: unaligned buffers are not an error
The FAT driver supports unaligned reads and writes and EFI applications
will make use of these. So a misaligned buffer is only worth a debug
message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
f8240ce95d fs: fat: support unlink
In this patch, unlink support is added to FAT file system.
A directory can be deleted only if it is empty.

In this implementation, only a directory entry for a short file name
will be removed. So entries for a long file name can and should be
reclaimed with fsck.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
e2519daf5c fs: add unlink interface
"unlink" interface is added to file operations.
This is a preparatory change as unlink support for FAT file system
will be added in next patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
31a18d570d fs: fat: support mkdir
In this patch, mkdir support is added to FAT file system.
A newly created directory contains only "." and ".." entries.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
3a10e07234 fs: fat: remember the starting cluster number of directory
The starting cluster number of directory is needed to initialize ".."
(parent directory) entry when creating a new directory.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
e7074cffb8 fs: add mkdir interface
"mkdir" interface is added to file operations.
This is a preparatory change as mkdir support for FAT file system
will be added in next patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
cb8af8af5b fs: fat: support write with non-zero offset
In this patch, all the necessary code for allowing for a file offset
at write is implemented. What plays a major roll here is get_set_cluster(),
which, in contrast to its counterpart, set_cluster(), only operates on
already-allocated clusters, overwriting with data.

So, with a file offset specified, set_contents() seeks and writes data
with set_get_cluster() until the end of a file, and, once it reaches
there, continues writing with set_cluster() for the rest.

Please note that a file will be trimmed as a result of write operation if
write ends before reaching file's end. This is an intended behavior
in order to maintain compatibility with the current interface.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
704df6aa0a fs: fat: refactor write interface for a file offset
The current write implementation is quite simple: remove existing clusters
and then allocating new ones and filling them with data. This, inevitably,
enforces always writing from the beginning of a file.

As the first step to lift this restriction, fat_file_write() and
set_contents() are modified to accept an additional parameter, file offset
and further re-factored so that, in the next patch, all the necessary code
will be put into set_contents().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
4ced2039dc fs: fat: support write with sub-directory path
In this patch, write implementation is overhauled and rewritten by
making full use of directory iterator. The obvious bonus is that we are
now able to write to a file with a directory path, like /A/B/C/FILE.

Please note that, as there is no notion of "current directory" on u-boot,
a file name specified must contain an absolute directory path. Otherwise,
"/" (root directory) is assumed.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f1149cea16 fs: fat: write returns error code instead of -1
It would be good that FAT write function return error code instead of
just returning -1 as fat_read_file() does.
This patch attempts to address this issue although it is 'best effort
(or estimate)' for now.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
25bb9dab14 fs: fat: check and normalize file name
FAT file system's long file name support is a bit complicated and has some
restrictions on its naming. We should be careful about it especially for
write as it may easily end up with wrong file system.

normalize_longname() check for the rules and normalize a file name
if necessary. Please note, however, that this function is yet to be
extended to fully comply with the standard.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
881042ef02 Revert "fs: fat: cannot write to subdirectories"
This reverts commit 0dc1bfb730.
The succeeding patch series will supersede it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f528c140c8 fs: fat: assure iterator's ->dent belongs to ->clust
In my attempt to re-work write operation, it was revealed that iterator's
"clust" does not always point to a cluster to which a current directory
entry ("dent") belongs.
This patch assures that it is always true by adding "next_clust" which is
used solely for dereferencing a cluster chain.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
b94b6be543 fs: fat: handle "." and ".." of root dir correctly with fat_itr_resolve()
FAT's root directory does not have "." nor ".."
So care must be taken when scanning root directory with fat_itr_resolve().
Without this patch, any file path starting with "." or ".." will not be
resolved at all.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f23101f951 fs: fat: extend get_fs_info() for write use
get_fs_info() was introduced in major re-work of read operation by Rob.
We want to reuse this function in write operation by extending it with
additional members in fsdata structure.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Stefan Roese
7236e24bc4 fs: ubifs: Add missing newlines in super.c
I just stumbled over some cluttered UBIFS messages. It seems some
newline chars are missing in the current U-Boot UBI source.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2018-09-14 06:31:54 +02:00
Masahiro Yamada
dee37fc99d Remove <inttypes.h> includes and PRI* usages in printf() entirely
In int-ll64.h, we always use the following typedefs:

  typedef unsigned int         u32;
  typedef unsigned long        uintptr_t;
  typedef unsigned long long   u64;

This does not need to match to the compiler's <inttypes.h>.
Do not include it.

The use of PRI* makes the code super-ugly.  You can simply use
"l" for printing uintptr_t, "ll" for u64, and no modifier for u32.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10 20:48:17 -04:00
Andreas Dannenberg
287c04e11a fs/fat: debug-print file read position during file_fat_read_at()
In order to make the debug print in file_fat_read_at() a tad more useful,
show the offset the file is being read at alongside the filename.

Suggested-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-20 07:21:28 -04:00
Heinrich Schuchardt
ca230b094e fs: fix typo 'dumm'
%s/dumm /dummy /

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-13 14:03:52 -04:00
Heinrich Schuchardt
0dc1bfb730 fs: fat: cannot write to subdirectories
fs_fat_write() is not able to write to subdirectories.

Currently if a filepath with a leading slash is passed, the slash is
treated as part of the filename to be created in the root directory.

Strip leading (back-)slashes.

Check that the remaining filename does not contain any illegal characters
(<>:"/\|?*). This way we will throw an error when trying to write to a
subdirectory.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:59:44 +02:00
Marek Behún
f8c173b6a0 fs: btrfs: Fix wrong comparison in logical to physical mapping
The comparison
  logical > item->logical + item->length
in btrfs_map_logical_to_physical is wrong and should be instead
  logical >= item->logical + item->length
For example, if
  item->logical = 4096
  item->length = 4096
and we are looking for logical = 8192, it is not part of item (item is
[4096, 8191]). But the comparison is false and we think we have found
the correct item, although we should be searing in the right subtree.

This fixes some bugs I encountered.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-07-20 15:37:44 -04:00
Christophe Kerello
5a08cfee39 ubifs: remove useless code
By checking ubifs source code, s_instances parameter is not
used anymore. So, set this parameter and the associated source
code under __UBOOT__ compilation.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-12 07:27:34 +02:00
Yevgeny Popovych
d146a7b9c6 fs: btrfs: Do not fail when all root_backups are empty
This is the case when reading freshly created filesystem.
The error message is like the following:
    btrfs_read_superblock: No valid root_backup found!

Since the data from super_roots/root_backups is not actually used -
decided to rework btrfs_newest_root_backup() into
btrfs_check_super_roots() that will only check if super_roots
array is valid and correctly handle empty scenario.

As a result:
* btrfs_read_superblock() now only checks if super_roots array is valid;
  the case when it is empty is considered OK.
* removed root_backup pointer from btrfs_info,
  which would be NULL in case of empty super_roots.
* btrfs_read_superblock() verifies number of devices from the superblock
  itself, not newest root_backup.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Sergey Struzh <sergeys@pointgrab.com>
2018-06-18 14:43:12 -04:00
Alexey Brodkin
f8c987f8f1 lib: Add hexdump
Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.

This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------

which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35  ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e  200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30  sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00  0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00  bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39  fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72  ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65  =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32  rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c  000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75  0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30  t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  00..............
...
------------------->8----------------

Source of hexdump.c was copied from Linux kernel v4.7-rc2.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefan Roese <sr@denx.de>
2018-06-13 07:49:12 -04:00
Yevgeny Popovych
f559180176 fs: btrfs: Fix not all CHUNK_ITEMs being read from CHUNK_TREE
This causes errors when translating logical addresses to physical:
  btrfs_map_logical_to_physical: Cannot map logical address <addr> to physical
  btrfs_file_read: Error reading extent

The behavior of btrfs_map_logical_to_physical() is to stop traversing
CHUNK_TREE when it encounters first non-CHUNK_ITEM, which makes
only some portion of CHUNK_ITEMs being read.
Change it to skip over non-chunk items.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Sergey Struzh <sergeys@pointgrab.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-06-13 07:49:12 -04:00
Alex Kiernan
0d488e8f50 fs: Add fs_get_type_name to return current filesystem name
Add fs_get_type_name so we can get the current filesystem type.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Eugen Hristev
e71a969cea fs: ext4: fix crash on ext4ls
Found a crash while issuing ext4ls with a non-existent directory.
Crash test:

=> ext4ls mmc 0 1
** Can not find directory. **
data abort
pc : [<3fd7c2ec>]          lr : [<3fd93ed8>]
reloc pc : [<26f142ec>]    lr : [<26f2bed8>]
sp : 3f963338  ip : 3fdc3dc4     fp : 3fd6b370
r10: 00000004  r9 : 3f967ec0     r8 : 3f96db68
r7 : 3fdc99b4  r6 : 00000000     r5 : 3f96dc88  r4 : 3fdcbc8c
r3 : fffffffa  r2 : 00000000     r1 : 3f96e0bc  r0 : 00000002
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Tested on SAMA5D2_Xplained board (sama5d2_xplained_mmc_defconfig)

Looks like crash is introduced by commit:
"fa9ca8a" fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls

Issue is that dirnode is not initialized, and then freed if the call
to ext4_ls fails. ext4_ls will not change the value of dirnode in this case
thus we have a crash with data abort.

I added initialization and a check for dirname being NULL.

Fixes: "fa9ca8a" fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-23 17:30:04 -04:00
Patrice Chotard
87deefeccc ubifs: avoid assert failed in ubifs.c
This patch solves assert failed displayed in the console during a boot.
The root cause is that the ubifs_inode is not already allocated when
ubifs_printdir and ubifs_finddir functions are called.

Trace showing the issue:
feed 'boot.scr.uimg', ino 94, new f_pos 0x17b40ece
dent->ch.sqnum '7132', creat_sqnum 3886945402880
UBIFS assert failed in ubifs_finddir at 436
INODE ALLOCATION: creat_sqnum '7129'
Found U-Boot script /boot.scr.uimg

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-09 11:53:55 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Bradley Bolen
05ea83b67e ubifs: Change value of mutex_is_locked()
The mutex lock and unlock functions are stubbed out and mutex_is_locked
was 0.  This caused asserts to fail in ubifs code when checking that the
mutex was locked.  For example,

UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278

Assume that the "mutex" is locked since that is the normal case when it
is checked in the ubifs code.

Signed-off-by: Bradley Bolen <bradleybolen@gmail.com>
2018-04-11 11:27:07 +02:00
Marek Behún
22fc7b6cd6 fs: btrfs: Remove unused debug code left from development
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-04-06 17:04:33 -04:00
Andre Heider
44683170f8 fs: cbfs: fix locating the cbfs header
The value at the end of the rom is not a pointer, it is an offset
relative to the end of rom.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2018-03-31 16:00:03 +08:00
Petr Vorel
afb6fda2ae Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig
Introduce another difference from upstream (kernel) source in
fs/ubifs/super.c: adding preprocessor condition as y variable in
mount_ubifs() depends on CONFIG_UBIFS_SILENCE_MSG:
fs/ubifs/super.c:1337:15: error: variable ?y? set but not used [-Werror=unused-but-set-variable]
  long long x, y;

Not setting CONFIG_UBIFS_SILENCE_MSG in am335x_igep003x_defconfig and
igep0032_defconfig. Although it was defined in their config headers, it
depends on CMD_UBIFS which is not set for them.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Heiko Schocher <hs@denx.de>
2018-03-24 06:37:10 +01:00
Petr Vorel
e995128158 ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG
Use of CONFIG_UBIFS_SILENCE_MSG was added in
147162dac6 ("ubi: ubifs: Turn off verbose prints")

Then it was removed in
ff94bc40af ("mtd, ubi, ubifs: resync with Linux-3.14")

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-24 06:36:54 +01:00
Marek Behún
51be471663 fs: ext4: Do not print mount fail message when not ext4 filesystem
Other filesystem drivers don't do this.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-03-09 12:31:07 -05:00
Heinrich Schuchardt
428e60e079 yaffs2: iterator variable cannot be NULL
The iterator of list_for_each() is never NULL.

Identified with coccinelle.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09 12:31:06 -05:00
Tom Rini
f39bfec230 fs: btrfs: Fix printf format character warning
When printing a size_t value we need to use %zu for portability between
32bit and 64bit targets.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-01-29 12:50:08 -05:00
Alberto Sánchez Molero
2021f083ed fs: btrfs: Fix unaligned memory accesses
Loading files stored with lzo compression from a btrfs filesystem was
producing unaligned memory accesses, which were causing a data abort
and a reset on an Orange Pi Zero.

The change in hash.c is not triggered by any error but follows the
same pattern. Please confirm.

Fixed according to doc/README.unaligned-memory-access.txt

Signed-off-by: Alberto Sánchez Molero <alsamolero@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
2018-01-28 12:27:12 -05:00
Tuomas Tynkkynen
8bad6cb176 fs: fat: Drop CONFIG_SUPPORT_VFAT
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since
2003), so as a result VFAT support is always enabled regardless of
whether a board config defines it or not. Drop this unnecessary option.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:31 -05:00
Tuomas Tynkkynen
e8df14d216 fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:31 -05:00
Tuomas Tynkkynen
3d22bae57f fs: Migrate ext4 to Kconfig
Migrate the following symbols to Kconfig:

CONFIG_FS_EXT4
CONFIG_EXT4_WRITE

The definitions in config_fallbacks.h can now be expressed in Kconfig.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:30 -05:00
Heinrich Schuchardt
d2f7158028 fs/fat: remove distractive message in file_fat_read_at()
The message "reading %s\n" may be interesting when
debugging but otherwise it is superfluous.

Only output the message when debugging.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19 15:49:28 -05:00
Heinrich Schuchardt
a327bde783 fs: remove distractive message in fs_read()
The message
"** %s shorter than offset + len **\n"
may be interesting when debugging but it does not indicate an
error.

So we should not write it if we are not in debug mode.

Fixes: 7a3e70cfd8 fs/fs.c: read up to EOF when len would read past EOF
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19 15:49:28 -05:00
Jean-Jacques Hiblot
2c33b0c7d8 fat write: Fixed a problem with the case of file names when writing files
commit 21a24c3bf3 ("fs/fat: fix case for FAT shortnames") made it
possible that get_name() returns file names with some upper cases.
find_directory_entry() must be updated to take this account, and use
case-insensitive functions to compare file names.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-10 08:05:51 -05:00
Masahiro Yamada
6ae3900a86 mtd: nand: Rename nand.h into rawnand.h
This header was renamed to rawnand.h in Linux.

The following is the corresponding commit in Linux.

  commit d4092d76a4a4e57b65910899948a83cc8646c5a5
  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
  Date:   Fri Aug 4 17:29:10 2017 +0200

      mtd: nand: Rename nand.h into rawnand.h

      We are planning to share more code between different NAND based
      devices (SPI NAND, OneNAND and raw NANDs), but before doing that
      we need to move the existing include/linux/mtd/nand.h file into
      include/linux/mtd/rawnand.h so we can later create a nand.h header
      containing all common structure and function prototypes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:00 +09:00
Neil Armstrong
34dd853ce5 fat: Use cache aligned buffers for fat_opendir
Before this patch one could receive following errors when executing "fatls"
command on machine with cache enabled (ex i.MX6Q) :

=> fatls mmc 0:1
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8

To alleviate this problem - the calloc()s have been replaced with
malloc_cache_aligned() and memset().

After those changes the buffers are properly aligned (with both start
address and size) to SoC cache line.

Fixes: 09fa964bba ("fs/fat: Fix 'CACHE: Misaligned operation at range' warnings")
Suggested-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-29 22:36:59 -05:00
Heinrich Schuchardt
24f48416df fs: avoid possible NULL dereference in fs_devread
It is unwise to first dereference a variable
and then to check if it was NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-29 22:30:50 -05:00
Tom Rini
6e6cf015e7 Merge git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-27 07:22:11 -05:00
Heinrich Schuchardt
76df275ce5 yaffs2: rework yaffs_new_obj_id
The iterator variable of list_for_each is never NULL.
if (1 || A) is always true.
Use break if entry found.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-20 20:18:38 -05:00
Heinrich Schuchardt
4b29975fd0 ubifs: no NULL check needed before free
kfree() calls free.
free() checks if the parameter is NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-20 10:13:33 +01:00
Ian Ray
ecdfb4195b ext4: recover from filesystem corruption when reading
Some fixes when reading EXT files and directory entries were identified
after using e2fuzz to corrupt an EXT3 filesystem:

 - Stop reading directory entries if the offset becomes badly aligned.

 - Avoid overwriting memory by clamping the length used to zero the buffer
   in ext4fs_read_file.  Also sanity check blocksize.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-20 09:58:31 +01:00
Masahiro Yamada
8b7f4b9cc1 mtd: remove MTDDEBUG() and CONFIG_MTD_DEBUG
All users of this macro have been converted.  Remove MTDDEBUG and
related CONFIG options.

ubifs_dbg_msg_key() is kept.  It is silent unless DEBUG is defined.

I am not touching scripts/config_whitelist.txt.  The deprecated options
will be dropped by the next resync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 14:07:26 -04:00
Vagrant Cascadian
c005f7edbb fs/jffs2/mini_inflate.c: use "static inline" instead of "inline"
This makes gcc no longer expect an out-of-line version of the
functions being present elsewhere.

This fixes a failure to build on several marvell targets with gcc-7 on
Debian:

  https://bugs.debian.org/877963

Signed-off-by: Adrian Bunk <bunk@debian.org>
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
2017-10-16 09:42:51 -04:00
Engling, Uwe
41ba7f525f jffs2: ECC corrected nand data is ignored
Hello,

I ran into a problem with the JFFS2 filesystem driver implemented in U-Boot.

I've got a NAND device that has correctable ECC errors (corrected somewhere in mtd/nand/nand_base.c).
The NAND driver tells the filesystem layer (jffs2_1pass.c) above that there occurred correctable ECC errors and returns with a "value > 0".
The JFFS2 driver recognizes the corrected ECC errors as real error and skips this block because the only accepts a "return value == 0" as correct.

This problem exists for over 8 years (I checked version 2010.09) so I'm a little bit worried that I interpreted something wrong or didn't get the whole context.

Can someone confirm this bug (and the bugfix) in the u-boot jffs2 driver?

There was a mail in 2012 that mentioned the same problem, but there was no patch:
http://u-boot.10912.n7.nabble.com/JFFS2-seems-to-drop-nand-data-with-ECC-corrections-td142008.html
Sometime after this discussion the return value of nand_read() changed from -EUCLEAN as correctable ECC error to a positive value with the count of ECC corrected errors.

With kind reguards,
Uwe Engling
2017-10-16 09:42:51 -04:00
Marek Behún
38fc683d33 fs: Set .opendir to fs_opendir_unsupported for btrfs
Otherwise fs_opendir will fault.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Marek Behún
733d963e3b fs: btrfs: Remove a foreign language note
I accidentaly left a foreign language note in the code from development.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Marek Behún
ecab881c7f fs: btrfs: Fix usage of uninitialized variables
The variable res should be initialized to 0 in these functions,
because if the searched key is not found, the variable is used
uninitialized.

Reported-by: Coverity (CID: 167335)
Reported-by: Coverity (CID: 167336)
Reported-by: Coverity (CID: 167337)
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Tuomas Tynkkynen
af609e3764 fs/fat: Check malloc return values and fix memory leaks
Check malloc() return values and properly unwind on errors so
memory allocated for fat_itr structures get freed properly.

Also fixes a leak of fsdata.fatbuf in fat_size().

Fixes: 2460098cff ("fs/fat: Reduce stack usage")
Reported-by: Coverity (CID: 167225, 167233, 167234)
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-08 16:19:56 -04:00
Tuomas Tynkkynen
09fa964bba fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
The 'block' field of fat_itr needs to be properly aligned for DMA and
while it does have '__aligned(ARCH_DMA_MINALIGN)', the fat_itr structure
itself needs to be properly aligned as well.

While at it use malloc_cache_aligned() for the other aligned allocations
in the file as well.

Fixes: 2460098cff ("fs/fat: Reduce stack usage")
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-08 16:19:56 -04:00
Tom Rini
fa9ca8a5d2 fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
As reported by Coverity, we did not free dirnode in the case of failure.
Do so now.

Reported-by: Coverity (CID: 131221)
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:22 -04:00
Tuomas Tynkkynen
8df8731474 fs/fat: Fix pathnames using '..' that lead to the root directory
If we end up back in the root directory via a '..' directory entry, set
itr->is_root accordingly. Failing to do that gives spews like
"Invalid FAT entry" and being unable to access directory entries located
past the first cluster of the root directory.

Fixes: 8eafae209c ("fat/fs: convert to directory iterators")
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:19 -04:00
Tuomas Tynkkynen
385b731855 fs/ext4: Fix group descriptor checksum calculation
The current code doesn't compute the group descriptor checksum correctly
for the filesystems that e2fsprogs 1.43.4 creates (they have
'Group descriptor size: 64' as reported by tune2fs). Extend the checksum
calculation to be done as ext4_group_desc_csum() does in Linux.

This fixes these errors in dmesg from running fs-test.sh and makes it
succeed again:

[1671902.620699] EXT4-fs (loop1): ext4_check_descriptors: Checksum for group 0 failed (35782!=10965)
[1671902.620706] EXT4-fs (loop1): group descriptors corrupted!

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:18 -04:00
Masahiro Yamada
9b643e312d treewide: replace with error() with pr_err()
U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

  # define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux.  (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
 (...)
// </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 11:59:44 -04:00
Tom Rini
6b7fd350e8 fs/btrfs: Fix warning in btrfs_check_super()
We specifically say that the last arg is u32, so use %lu.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-03 08:44:13 -04:00
Marek Behún
0c936ee319 fs: btrfs: Add U-Boot fs handlers.
Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/Kconfig
 create mode 100644 fs/btrfs/Makefile
 create mode 100644 fs/btrfs/btrfs.c
 create mode 100644 include/btrfs.h
2017-10-02 21:52:18 -04:00
Marek Behún
21a14facb1 fs: btrfs: Add single-device read-only BTRFS implementation
This adds the proper implementation for the BTRFS filesystem.
The implementation currently supports only read-only mode and
the filesystem can be only on a single device.

Checksums of data chunks is unimplemented.

Compression is implemented (ZLIB + LZO).

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/btrfs.h
 create mode 100644 fs/btrfs/chunk-map.c
 create mode 100644 fs/btrfs/compression.c
 create mode 100644 fs/btrfs/ctree.c
 create mode 100644 fs/btrfs/dev.c
 create mode 100644 fs/btrfs/dir-item.c
 create mode 100644 fs/btrfs/extent-io.c
 create mode 100644 fs/btrfs/hash.c
 create mode 100644 fs/btrfs/inode.c
 create mode 100644 fs/btrfs/root.c
 create mode 100644 fs/btrfs/subvolume.c
 create mode 100644 fs/btrfs/super.c
2017-10-02 21:52:17 -04:00
Marek Behún
597b4aff7b fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functions
BTRFS on disk structures are stored in Little Endian. Add functions
to convert this structures to cpu and to disk format.

On Little Endian hosts, these functions do nothing.

On Big Endian the CALL_MACRO_FROM_EACH from variadic-macro.h is used
to define all the members for each structure on which cpu_to_le* or
le*_to_cpu is to be called.

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/conv-funcs.h
2017-10-02 21:52:17 -04:00
Marek Behún
d4a704af5d fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)
Add btrfs_tree.h and ctree.h from Linux which contains constants
and structures for the BTRFS filesystem.

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/btrfs_tree.h
 create mode 100644 fs/btrfs/ctree.h
2017-10-02 21:52:17 -04:00
Marek Behún
5994e8b643 fs: Create a common fs_devread for ext4/reiserfs/zfs
The ext4, reiserfs and zfs filesystems all have their own implementation
of the same function, *_devread. Generalize this function into fs_devread
and put the code into fs/fs_internal.c.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
[trini: Move fs/fs_internal.o hunk to the end of fs/Makefile as all
cases need it]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02 21:51:50 -04:00
Tom Rini
2460098cff fs/fat: Reduce stack usage
We have limited stack in SPL builds.  Drop itrblock and move to
malloc/free of itr to move this off of the stack.  As part of this fix a
double-free issue in fat_size().

Signed-off-by: Tom Rini <trini@konsulko.com>
---
Rework to use malloc/free as moving this to a global overflows some SH
targets.
2017-09-22 07:37:43 -04:00
Rob Clark
725ffdb5cb fs/fat: fix fatbuf leak
A new fatbuf was allocated by get_fs_info() (called by fat_itr_root()),
but not freed, resulting in eventually running out of memory.  Spotted
by running 'ls -r' in a large FAT filesystem from Shell.efi.

fatbuf is mainly used to cache FAT entry lookups (get_fatent())..
possibly once fat_write.c it can move into the iterator to simplify
this.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-15 09:03:15 -04:00
Rob Clark
265edc03d5 fs/fat: Clean up open-coded sector <-> cluster conversions
Use the clust_to_sect() helper that was introduced earlier, and add an
inverse sect_to_clust(), plus update the various spots that open-coded
this conversion previously.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:15 -04:00
Rob Clark
21a24c3bf3 fs/fat: fix case for FAT shortnames
Noticed when comparing our output to linux.  There are some lcase bits
which control whether filename and/or extension should be downcase'd.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:14 -04:00
Rob Clark
89191d6267 fat/fs: move ls to generic implementation
Add a generic implementation of 'ls' using opendir/readdir/closedir, and
replace fat's custom implementation.  Other filesystems should move to
the generic implementation after they add opendir/readdir/closedir
support.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:13 -04:00
Rob Clark
41fa83d1a6 fat/fs: remove a bunch of dead code
Spotted by chance, when trying to remove file_fat_ls(), I noticed there
were some dead users of the API.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:12 -04:00
Rob Clark
1f40366b31 fs/fat: implement opendir/readdir/closedir
Implement the readdir interface using the directory iterators.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:12 -04:00
Rob Clark
4bbcc965f9 fs: add fs_readdir()
Needed to support efi file protocol.  The fallback.efi loader wants
to be able to read the contents of the /EFI directory to find an OS
to boot.

Modelled after POSIX opendir()/readdir()/closedir().  Unlike the other
fs APIs, this is stateful (ie. state is held in the FS_DIR "directory
stream"), to avoid re-traversing of the directory structure at each
step.  The directory stream must be released with closedir() when it
is no longer needed.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:11 -04:00
Rob Clark
8eafae209c fat/fs: convert to directory iterators
And drop a whole lot of ugly code!

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:11 -04:00
Rob Clark
c6e3baa565 fs/fat: introduce new director iterators
Untangle directory traversal into a simple iterator, to replace the
existing multi-purpose do_fat_read_at() + get_dentfromdir().

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-15 09:03:10 -04:00
Rob Clark
45449980f8 fs/fat: split out helper to init fsdata
Want to re-use this in fat dirent iterator in next patch.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 09:03:09 -04:00
Tom Rini
10b078d836 fs: ext4: Fix journal overrun issue reported by Coverity
While &p_jdb[fs->blksz] is a valid expression (it points *one* char
sized element past the end of the array, e.g. &p_jdb[fs->blksz + 1] is
invalid (according to the C standard (C99/C11)).

Changing this to tag = (struct ext3_journal_block_tag *)(p_jdb + ofs);

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Suggested-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reported-by: Coverity (CID: 165117, 165110)
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-08-26 14:56:13 -04:00
Reno Farnesi
76216211f8 fs: fat: fix fatwrite overflow calculation
The overflow calculation was incorrect. Adding the start block of the
partition is not needed because the sectors are already relative to the
beginning of the partition. If you attempted to write a file smaller
than cur_part_info.start blocks on a full partition the old calculation
fails to catch the overflow. This would cause an infinite loop in the
determine_fatent function.

Old, incorrect calculation:

ending sector of new file = start sector + file size (in sectors)
last sector = partition start + total sectors on the partition

Adding the partition start block number is not needed because sectors
are already relative to the start of the partition.

New calculation:

ending sector of new file = start sector + file size (in sectors)
last sector = total sectors on the partition

Signed-off-by: Reno Farnesi <nfarnesi4@gmail.com>
2017-08-26 14:56:07 -04:00
Tom Rini
42a9f147d8 fs/fat: Correct blk_dread() return value check
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20 09:54:31 -04:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Simon Glass
018f530323 env: Rename common functions related to setenv()
We are now using an env_ prefix for environment functions. Rename these
commonly used functions, for consistency. Also add function comments in
common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:23:32 -04:00
Simon Glass
382bee57f1 env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:22:18 -04:00
Simon Glass
7a76431845 Convert CONFIG_CMD_YAFFS2 to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_YAFFS2

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 17:44:50 -04:00
Grygorii Strashko
eb6a5c3c02 fs: use get_nand_dev_by_index()
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-07-11 22:41:47 -04:00
Simon Glass
10e40d54b3 Kconfig: Add CONFIG_SATA to enable SATA
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Masahiro Yamada
51855e8981 treewide: remove unneeded semicolons
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16 10:11:38 -04:00
Siva Durga Prasad Paladugu
34cc30af27 fs: usbifs: Fix warning in ubifs
This patch fixes the below warning by typecasting it properly
fs/ubifs/ubifs.c: In function 'ubifs_load':
fs/ubifs/ubifs.c:942:29: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  err = ubifs_read(filename, (void *)addr, 0, size, &actread);

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2017-06-06 07:11:12 +02:00
Sekhar Nori
eedfb89e61 fs: fat: add kbuild configuration support
Add Kconfig symbols for various configurations
supported by FAT filesystem support code.

CONFIG_SUPPORT_VFAT has been left out since its
force enabled in include/fat.h and probably
should get removed at some point.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03 17:55:16 -04:00
Simon Glass
59e12a4a8c fs: Kconfig: Add a separate option for FS_JFFS2
Rather than using CMD_JFFS2 for both the filesystem and its command, we
should have a separate option for each. This allows us to enable JFFS2
support without the command, if desired, which reduces U-Boot's size
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22 12:45:31 -04:00
Simon Glass
fc843a02ac Kconfig: Add a CONFIG_IDE option
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22 12:45:27 -04:00
Simon Glass
80e44cfe10 fs: Kconfig: Add a separate option for FS_CRAMFS
Rather than using CMD_CRAMFS for both the filesystem and its command, we
should have a separate option for each. This allows us to enable CRAMFS
support without the command, if desired, which reduces U-Boot's size
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: imply FS_CRAMFS for keymile]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30 13:40:59 -04:00
Simon Glass
deb9599915 fs: Kconfig: Add a separate config for FS_CBFS
Rather than using CMD_CBFS for both the filesystem and its command, we
should have a separate option for each. This allows us to enable CBFS
support without the command, if desired, which reduces U-Boot's size
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: imply FS_CBFS on SYS_COREBOOT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30 13:40:57 -04:00
Lokesh Vutla
509b498a50 ext4: Fix comparision of unsigned expression with < 0
In file ext4fs.c funtion ext4fs_read_file() compares an
unsigned expression with < 0 like below

	lbaint_t blknr;
	blknr = read_allocated_block(&(node->inode), i);
	if (blknr < 0)
		return -1;

blknr is of type ulong/uint64_t. read_allocated_block() returns
long int. So comparing blknr with < 0 will always be false. Instead
declare blknr as long int.

Similarly ext4/dev.c does a similar comparison. Drop the redundant
comparison.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-27 16:49:09 -04:00
xypron.glpk@gmx.de
6568c731c4 yaffs2: remove redundant condition
If !parent, the changed line is not reached.
So there is no need to check the value again.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18 10:29:22 -04:00
Tyler Hall
d39a0d2c84 cramfs: basic symlink support
Handle symlinks to files in the current directory. Other cases could be
handled with additional code, but this is a start.

Add explicit errors for absolute paths and links found in the middle of
a path (directories). Other cases like '..' or '.' will result with the
file not being found as when those path components are explicitly
provided.

Add a helper to decompress a null-terminated link name which is shared
with cramfs_list_inode.

Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
2017-04-18 10:27:58 -04:00
Tyler Hall
a6ea791cb9 cramfs: block pointers are 32 bits
Using a variably-sized type is incorrect here since we're reading a
fixed file format. Fixes cramfs on 64-bit platforms.

Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
2017-04-18 10:27:57 -04:00
Masahiro Yamada
e856bdcfb4 flash: complete CONFIG_SYS_NO_FLASH move with renaming
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.

During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH".  Flipping the logic will
make the code more readable.  Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.

This commit was created as follows:

[1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

[3] Rename the instances in defconfigs by the following:
  find . -path './configs/*_defconfig' | xargs sed -i \
  -e '/CONFIG_SYS_NO_FLASH=y/d' \
  -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

[4] Change the conditionals by the following:
  find . -name '*.[ch]' | xargs sed -i \
  -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
  -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
  -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
  -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

[5] Modify the following manually
  - Rename the rest of instances
  - Remove the description from README
  - Create the new Kconfig entry in drivers/mtd/Kconfig
  - Remove the old Kconfig entry from common/Kconfig
  - Remove the garbage comments from include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:30:25 -05:00
Stefan Brüns
b352caea75 fs/fat: Fix unaligned __u16 reads for FAT12 access
Doing unaligned reads is not supported on all architectures, use
byte sized reads of the little endian buffer.
Rename off16 to off8, as it reflects the buffer offset in byte
granularity (offset is in entry, i.e. 12 bit, granularity).
Fix a regression introduced in 8d48c92b45

Reported-by: Oleksandr Tymoshenko <gonzo@bluezbox.com>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Tested-by: Oleksandr Tymoshenko <gonzo@bluezbox.com>
2017-01-28 14:04:51 -05:00
Patrick Delaunay
b331cd6204 cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT
We convert CONFIG_PARTITION_UUIDS to Kconfig first.  But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28 08:48:03 -05:00
Stefan Brüns
3cc5bbb8e6 fs/ext4: Initialize group descriptor size for revision level 0 filesystems
genext2fs creates revision level 0 filesystems, which are not readable
by u-boot due to the initialized group descriptor size field.
f798b1dda1

Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reported-by: FrostyBytes@protonmail.com
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2016-12-27 11:24:18 -05:00
Stefan Brüns
8d48c92b45 fs/fat: simplify get_fatent for FAT12
Instead of shuffling bits from two adjacent 16 bit words, use one 16 bit
word with the appropriate byte offset in the buffer.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-12-27 11:24:14 -05:00
Stefan Brüns
b8948d2aef fs/fat: merge readwrite get_fatent_value() with readonly get_fatent()
get_fatent_value(...) flushes changed FAT entries to disk when fetching
the next FAT blocks, in every other aspect it is identical to
get_fatent(...).

Provide a stub implementation for flush_dirty_fat_buffer if
CONFIG_FAT_WRITE is not set. Calling flush_dirty_fat_buffer during read
only operation is fine as it checks if any buffers needs flushing.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-12-27 11:24:14 -05:00
Stefan Brüns
6c1a808052 fs/fat: Avoid corruption of sectors following the FAT
The FAT is read/flushed in segments of 6 (FATBUFBLOCKS) disk sectors. The
last segment may be less than 6 sectors, cap the length.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-12-27 11:24:13 -05:00
Philipp Skadorov
49abbd9cc3 fat: fatwrite: fix the command for FAT12
The u-boot command fatwrite empties FAT clusters from the beginning
till the end of the file.
Specifically for FAT12 it fails to detect the end of the file and goes
beyond the file bounds thus corrupting the file system.

Additionally, FAT entry chaining-up into a file is not implemented
for FAT12.

The users normally workaround this by re-formatting the partition as
FAT16/FAT32, like here:
https://github.com/FEDEVEL/openrex-uboot-v2015.10/issues/1

The patch fixes the bounds of a file and FAT12 entries chaining into
a file, including EOF markup.

Signed-off-by: Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
2016-12-27 11:24:13 -05:00
Tom Rini
0317724e6c sandboxfs: Fix resource leak
Now that we free resources in sandbox_fs_ls Coverity is letting us know
that in some cases we might leak.  So in case of error we should still
let os_dirent_free free anything that was allocated.

Fixes: 86167089b7 ("sandbox/fs: Free memory allocated by os_dirent_ls")
Reported-by: Coverity (CID: 153450)
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Tien Fong Chee
7aa1a6b71c fs/fat/fatwrite: Local variable as buffer to store dir_slot entries
fill_dir_slot use get_contents_vfatname_block as a temporary buffer for
constructing a list of dir_slot entries. To save the memory and providing
correct type of memory for above usage, a local buffer with accurate size
declaration is introduced.

The local array size 640 is used because for long file name entry,
each entry use 32 bytes, one entry can store up to 13 characters.
The maximum number of entry possible is 20. So, total size is
32*20=640bytes.

Signed-off-by: Genevieve Chan <ccheauya@altera.com>
Signed-off-by: Tien Fong Chee <tfchee@altera.com>
2016-11-28 20:09:45 -05:00
Stefan Brüns
66a47ff2d8 ext4: Allow reading files with non-zero offset, clamp read len
Support was already implemented, but not hooked up. This fixes several
fails in the test cases.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21 14:07:27 -05:00
Stefan Brüns
f81db56f2f ext4: Fix handling of sparse files
A sparse file may have regions not mapped by any extents, at the start
or at the end of the file, or anywhere between, thus not finding a
matching extent region is never an error.

Found by python filesystem tests.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-11-21 14:07:27 -05:00
Vagrant Cascadian
1381901e9a Fix spelling of "multiple".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-31 10:13:16 -04:00
Stefan Brüns
805e3e00f2 ext4: Only write journal entries for modified blocks in unlink_filename
Instead of creating a journal entry for each directory block, even
if the block is unmodified, only log the modified block.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-10-24 08:04:37 -04:00
Stefan Brüns
d1bdf22461 ext4: Fix handling of direntlen in unlink_filename
The direntlen checks were quite bogus, i.e. the loop termination used
"len + offset == blocksize" (exact match only), and checked for a
direntlen less than 0. The latter can never happen as the len is
unsigned, this has been reported by Coverity, CID 153384.

Use the same code as in search_dir for directory traversal. This code
has the correct checks for direntlen >= sizeof(struct dirent), and
offset < blocksize.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reported-by: Coverity (CID: 153383, 153384)
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-10-24 08:04:36 -04:00
Stefan Brüns
15bf8c4f93 ext4: cleanup unlink_filename function
Use the same variable names as in search_dir, to make purpose of variables
more obvious.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24 08:04:36 -04:00
Stefan Brüns
86167089b7 sandbox/fs: Free memory allocated by os_dirent_ls
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:07 -06:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Masahiro Yamada
b5bf5cb3b3 treewide: use #include <...> to include public headers
We are supposed to use #include <...> to include headers in the
public include paths.  We should use #include "..." only for headers
in local directories.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23 17:53:56 -04:00
Stefan Brüns
b4976b49a0 ext4: Revert rejection of 64bit enabled ext4 fs
Enable mounting of ext4 fs with 64bit feature, as it is supported now.
These had been disabled in 6f94ab6656.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:20:16 -04:00
Stefan Brüns
749e93ee18 ext4: Respect group descriptor size when adjusting free counts
Also adjust high 16/32 bits when free inode/block counts are modified.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:20:16 -04:00
Stefan Brüns
688d0e79f6 ext4: Use helper function to access group descriptor and its fields
The descriptor size is variable, thus array indices are not generically
applicable. The larger group descriptors also contain e.g. high parts
of block numbers, which have to be read and written.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:20:15 -04:00
Stefan Brüns
f798b1dda1 ext4: Use correct descriptor size when reading the block group descriptor
The correct descriptor size must be used when calculating offsets, and
also to read the correct amount of data.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:18:57 -04:00
Stefan Brüns
9f5dd8b6e2 ext4: Add helper functions for block group descriptor field access
The helper functions encapsulate access of the block group descriptors,
independent of group descriptor size. The helpers also deal with the
endianess of the fields, and with split fields like free_blocks/
free_blocks_high.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:18:56 -04:00
Stefan Brüns
fc214ef909 ext4: determine group descriptor size for 64bit feature
If EXT4_FEATURE_INCOMPAT_64BIT is set, the descriptor can be read from
the superblocks, otherwise it defaults to 32.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:18:56 -04:00
Stefan Brüns
b1edcf0d80 ext4: Fix memory leak of journal buffer if block is updated multiple times
If the same block is updated multiple times in a row during a single
file system operation, gd_index is decremented to use the same journal
entry again. Avoid loosing the already allocated buffer.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:02:44 -04:00
Stefan Brüns
de9e831675 ext4: Correct block number handling, empty block vs. error code
read_allocated block may return block number 0, which is just an indicator
a chunk of the file is not backed by a block, i.e. it is sparse.

During file deletions, just continue with the next logical block, for other
operations treat blocknumber <= 0 as an error.

For writes, blocknumber 0 should never happen, as U-Boot always allocates
blocks for the whole file.  Reading already handles this correctly, i.e. the
read buffer is 0-fillled.

Not treating block 0 as sparse block leads to FS corruption, e.g.
	./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
		ext4write host 0 0 /2.5GB.file 1 '
The 2.5GB.file from the fs test is actually a sparse file.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:02:44 -04:00
Stefan Brüns
b779e0290a ext4: remove duplicated block release code for extents
The data blocks are identical for files using traditional direct/indirect
block allocation scheme and extent trees, thus this code part can be
common. Only the code to deallocate the indirect blocks to record the
used blocks has to be seperate, respectively the code to release extent
tree index blocks.

Actually the code to release the extent tree index blocks is still missing,
but at least add a FIXME at the appropriate place.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:02:43 -04:00
Stefan Brüns
87f9fdc08d ext4: initialize full inode for inodes bigger than 128 bytes
Make sure the the extra_isize field (offset 128) is initialized to 0, to
mark any extra data as invalid.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:42 -04:00
Stefan Brüns
290ce2f95a ext4: Use correct value for inode size even on revision 0 filesystems
fs->inodesz is already correctly (i.e. dependent on fs revision)
initialized in ext4fs_mount.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:42 -04:00
Stefan Brüns
87a40b6e03 ext4: Fix memory leak in case of failure
temp_ptr should always be freed, even if the function is left via
goto fail.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:41 -04:00
Stefan Brüns
0ceef3d371 ext4: Avoid out-of-bounds access of block bitmap
If the blocksize is 1024, count is initialized with 1. Incrementing count
by 8 will never match (count == fs->blksz * 8), and ptr may be
incremented beyond the buffer end if the bitmap is filled. Add the
startblock offset after the loop.

Remove the second loop, as only the first iteration will be done.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:40 -04:00
Stefan Brüns
a9fa0ed183 ext4: After completely filled group, scan next group from the beginning
The last free block of a block group may be in its middle. After it has
been allocated, the next block group should be scanned from its beginning.

The following command triggers the bad behaviour (on a blocksize 1024 fs):

./sandbox/u-boot -c 'i=0; host bind 0 ./disk.raw ;
	while test $i -lt 260 ; do echo $i; setexpr i $i + 1;
		ext4write host 0:2 0 /X${i} 0x1450; done ;
	ext4write host 0:2 0 /X240 0x2000 ; '

When 'X240' is extended from 5200 byte to 8192 byte, the new blocks should
start from the first free block (8811), but it uses the blocks 8098-8103
and 16296-16297 -- 8103 + 1 + 8192 = 16296. This can be shown with
debugfs, commands 'ffb' and 'stat X240'.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:40 -04:00
Stefan Brüns
e927265225 ext4: Do not clear zalloc'ed buffers a second time
zero_buffer is never written, thus clearing it is pointless.
journal_buffer is completely initialized by ext4fs_devread (or in case
of failure, not used).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:39 -04:00
Stefan Brüns
398d6fad92 ext4: Only update number of of unused inodes if GDT_CSUM feature is set
e2fsck warns about "Group descriptor 0 marked uninitialized without
feature set."
The bg_itable_unused field is only defined if FEATURE_RO_COMPAT_GDT_CSUM
is set, and should be set (kept) zero otherwise.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:39 -04:00
Stefan Brüns
b7dd40d052 ext4: Scan all directory blocks when looking up an entry
Scanning only the direct blocks of the directory file may falsely report
an existing file as nonexisting, and worse can also lead to creation
of a duplicate entry on file creation.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:38 -04:00
Stefan Brüns
10a7a1b8ba ext4: Avoid corruption of directories with hash tree indexes
While directories can be read using the old linear scan method, adding a
new file would require updating the index tree (alternatively, the whole
tree could be removed).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:37 -04:00
Stefan Brüns
a321abd54f ext4: Scan all directory blocks for space when inserting a new entry
Previously, only the last directory block was scanned for available space.
Instead, scan all blocks back to front, and if no sufficient space is
found, eventually append a new block.
Blocks are only appended if the directory does not use extents or the new
block would require insertion of indirect blocks, as the old code does.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:36 -04:00
Stefan Brüns
b96c3c7292 ext4: Do not crash when trying to grow a directory using extents
The following command crashes u-boot:
./sandbox/u-boot -c 'i=0; host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
  while test $i -lt 200 ; do echo $i; setexpr i $i + 1;
  ext4write host 0 0 /foobar${i} 0; done'

Previously, the code updated the direct_block even for extents, and
fortunately crashed before pushing garbage to the disk.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:36 -04:00
Stefan Brüns
a0d767e2c1 ext4: propagate error if creation of directory entry fails
In case the dir entry creation failed, ext4fs_write would later overwrite
a random inode, as inodeno was never initialized.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:35 -04:00
Stefan Brüns
76a29519ff ext4: fix possible crash on directory traversal, ignore deleted entries
The following command triggers a segfault in search_dir:
./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
    ext4write host 0 0 /./foo 0x10'

The following command triggers a segfault in check_filename:
./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
    ext4write host 0 0 /. 0x10'

"." is the first entry in the directory, thus previous_dir is NULL. The
whole previous_dir block in search_dir seems to be a bad copy from
check_filename(...). As the changed data is not written to disk, the
statement is mostly harmless, save the possible NULL-ptr reference.

Typically a file is unlinked by extending the direntlen of the previous
entry. If the entry is the first entry in the directory block, it is
invalidated by setting inode=0.

The inode==0 case is hard to trigger without crafted filesystems. It only
hits if the first entry in a directory block is deleted and later a lookup
for the entry (by name) is done.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:34 -04:00
Michael Walle
011bc3342a ext4: fix wrong usage of le32_to_cpu()
le32_to_cpu() must only convert the revision_level and not the boolean
result.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:05 -04:00
Michael Walle
58a9ecbaf4 ext4: fix endianess problems in ext4 write support
All fields were accessed directly instead of using the proper byte swap
functions. Thus, ext4 write support was only usable on little-endian
architectures. Fix this.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:04 -04:00
Michael Walle
7f101be314 ext4: use kernel names for byte swaps
Instead of __{be,le}{16,32}_to_cpu use {be,le}{16,32}_to_cpu.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:02 -04:00
Michael Walle
2a0b7a971a ext4: change structure fields to __le/__be types
Change all the types of ext2/4 fields to little endian types and all the
JBD fields to big endian types. Now we can use sparse (make C=1) to check
for statements where we need byteswaps.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:01 -04:00
Stefan Brüns
ae1755be37 fs/fat: Correct description of determine_fatent function
Current description does not match the function behaviour.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 08:55:57 -04:00
Stefan Brüns
3c0ed9c3a5 fs/fat: Do not write unmodified fat entries to disk
The code caches 6 sectors of the FAT. On FAT traversal, the old contents
needs to be flushed to disk, but only if any FAT entries had been modified.
Explicitly flag the buffer on modification.

Currently, creating a new file traverses the whole FAT up to the first
free cluster and rewrites the on-disk blocks.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 08:55:56 -04:00
Stefan Brüns
ed76f91277 fs/fat: Remove two statements without effect
fatlength is a local variable which is no more used after the assignment.
s_name is not used in the function, save the strncpy.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-09-23 08:55:55 -04:00
Yaroslav K
cc7ed26934 cbfs: Fix incorrect CBFS file header size being used
This fixes incorrect filenames in cbfsls output.

Signed-off-by: Yaroslav K. <yar444@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[clean up checkpatch errors and warnings]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16 11:44:09 +08:00
Tom Rini
6f94ab6656 ext4: Refuse to mount filesystems with 64bit feature set
With e2fsprogs after 1.43 the 64bit and metadata_csum features are
enabled by default.  The metadata_csum feature changes how
ext4_group_desc->bg_checksum is calculated, which would break write
support.  The 64bit feature however introduces changes such that it
cannot be read by implementations that do not support it.  Since we do
not support this, we must not mount it.

Cc: Stephen Warren <swarren@nvidia.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stefan Roese <sr@denx.de>
Reported-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:14 -04:00
Guillaume GARDET
7a77e909a2 fs: cbfs: Fix build of fs/cbfs/cbfs.c when building u-boot sandbox on x86 32-bit
Fix the following build errors when building sandbox on x86 32-bit:

	In file included from fs/cbfs/cbfs.c:8:0:
	include/malloc.h:364:7: error: conflicting types for 'memset'
	void* memset(void*, int, size_t);
	^
	In file included from include/compiler.h:123:0,
			from include/cbfs.h:10,
			from fs/cbfs/cbfs.c:7:
	include/linux/string.h:78:15: note: previous declaration of 'memset' was here
	extern void * memset(void *,int,__kernel_size_t);
		^
	In file included from fs/cbfs/cbfs.c:8:0:
	include/malloc.h:365:7: error: conflicting types for 'memcpy'
	void* memcpy(void*, const void*, size_t);
	^
	In file included from include/compiler.h:123:0,
			from include/cbfs.h:10,
			from fs/cbfs/cbfs.c:7:
	include/linux/string.h:81:15: note: previous declaration of 'memcpy' was here
	extern void * memcpy(void *,const void *,__kernel_size_t);
		^
	scripts/Makefile.build:280: recipe for target 'fs/cbfs/cbfs.o' failed

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-19 09:57:09 -04:00
Scott Wood
17cb4b8f32 mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
b616d9b0a7 nand: Embed mtd_info in struct nand_chip
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.

This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip.  It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
151c06ec61 mtd: nand: Remove nand_info_t typedef
This typedef serves no purpose other than causing confusion with
struct nand_chip.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Simon Glass
c649e3c91c dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Ronald Zachariah
37f23885e4 fs: ext4: fix symlink read function
The function ext4fs_read_symlink was unable to handle a symlink
which had target name of exactly 60 characters.

Signed-off-by: Ronald Zachariah <rozachar@cisco.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Cc: Tom Rini <trini@konsulko.com>
2016-05-02 13:33:19 -04:00
Heiko Schocher
b1d6590d35 ubifs: fix memory corruption in super.c
In list "super_blocks" ubifs collects allocated super_block
structs. U-Boot frees on unmount the allocated struct,
so the pointer stored in this list is free after the umount.
On a new ubifs mount, the new allocated super_block struct
get inserted into the super_blocks list ... which contains
now a freed pointer, and the list_add_tail() corrupts the
freed memory ...

2 solutions are possible:
- remove the super_block from the super_blocks list
  on umount

- as U-Boot does not use the super_blocks list ...
  remove it complete for U-Boot.

Both solutions should not introduce problems for porting
to newer linux version, so this patch removes the unused
super_blocks list, as it saves code size and execution
time.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-04-22 11:48:17 +02:00
Tom Rini
1c8fdf8779 jffs2: Fix set but not used warning
We only use 'ofs' in jffs2_sum_scan_sumnode when debugging as it's part
of a dbg_summary call.  Mark this as __maybe_unused.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-01 17:17:43 -04:00
Vagrant Cascadian
0af49b9575 Fix spelling of "supported/unsupported".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
2016-03-22 12:16:14 -04:00
Simon Glass
2a981dc2c6 dm: block: Adjust device calls to go through helpers function
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
bcce53d048 dm: block: Rename device number member dev to devnum
This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3e8bd46950 dm: part: Rename some partition functions
Rename three partition functions so that they start with part_. This makes
it clear what they relate to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
e35929e4a1 dm: blk: Rename get_device_and_partition()
Rename this function to blk_get_device_part_str(). This is a better name
because it makes it clear that the function returns a block device and
parses a string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Masahiro Yamada
84b8bf6d5d bug.h: move BUILD_BUG_* defines to include/linux/bug.h
BUILD_BUG_* macros have been defined in several headers.  It would
be nice to collect them in include/linux/bug.h like Linux.

This commit is cherry-picking useful macros from include/linux/bug.h
of Linux 4.4.

I did not import BUILD_BUG_ON_MSG() because it would not work if it
is used with include/common.h in U-Boot.  I'd like to postpone it
until the root cause (the "error()" macro in include/common.h causes
the name conflict with "__attribute__((error()))") is fixed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-25 10:39:59 -05:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Tom Rini
495c3a1e22 ext4_common.c: Clean up failure cases in alloc_triple_indirect_block
As noted by Coverity, when we have an error in
alloc_triple_indirect_block we will leak ti_pbuff_start_addr as it's not
being freed.  Further inspection here shows that we could also leak
ti_cbuff_start_addr in one corner case so free that as well.

Reported-by: Coverity (CID 131205, 131206)
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:20 -05:00
Stephen Warren
7c4213f6a5 block: pass block dev not num to read/write/erase()
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:18 -05:00
David Müller (ELSOFT AG)
e9cdf3b85e fs: handle the fileaddr variable in the same way as in the network case
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-01-08 10:15:48 -05:00
Thomas Fitzsimmons
54d68e9333 fs: ext4: Prevent infinite loop in ext4fs_iterate_dir
If the ext3 journal gets out of sync with what is written on disk, for
example because of an unexpected power cut, ext4fs_read_file can
return an all-zero directory entry.  In that case, ext4fs_iterate_dir
would infinite loop.

This patch detects when a directory entry's direntlen member is 0 and
returns a failure status, which breaks out of the infinite loop.  As a
result, U-Boot will not find files that may subsequently be recovered
when the journal is replayed.

This is better behaviour than hanging in an infinite loop, but as a
further improvement maybe U-Boot could interpret the ext3 journal and
actually find the unsynced entries.

Signed-off-by: Thomas Fitzsimmons <fitzsim@cisco.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-11-23 11:01:52 -05:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Fabio Estevam
f8fdb81f6c compat: Remove is_power_of_2() definition
Use the is_power_of_2() definition from log2.h to align with the
kernel implementation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05 16:46:59 -05:00
Heiko Schocher
0195a7bb36 ubi,ubifs: sync with linux v4.2
sync with linux v4.2

commit 64291f7db5bd8150a74ad2036f1037e6a0428df2
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sun Aug 30 11:34:09 2015 -0700

    Linux 4.2

This update is needed, as it turned out, that fastmap
was in experimental/broken state in kernel v3.15, which
was the last base for U-Boot.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-26 09:22:36 +01:00
Hans de Goede
251cee0db2 ubifs: Add generic fs support
Add generic fs support, so that commands like ls, load and test -e can be
used on ubifs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:32 -04:00
Hans de Goede
29cc5bcadf ubifs: Add functions for generic fs use
Implement the necessary functions for implementing generic fs support
for ubifs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:32 -04:00
Hans de Goede
ad15749b6d ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use
Modify the ubifs u-boot wrapper function prototypes for generic fs use,
and give them their own header file.

This is a preparation patch for adding ubifs support to the generic fs
code from fs/fs.c.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:31 -04:00
Benoît Thébaudeau
1254b44a9f fs/fat/fat_write: Fix management of empty files
Overwriting an empty file not created by U-Boot did not work, and it
could even corrupt the FAT. Moreover, creating empty files or emptying
existing files allocated a cluster, which is not standard.

Fix this by always keeping empty files clusterless as specified by
Microsoft (the start cluster must be set to 0 in the directory entry in
that case), and by supporting overwriting such files.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:08 -04:00
Benoît Thébaudeau
e876be4b5c fs/fat/fat_write: Factor out duplicate code
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:08 -04:00
Benoît Thébaudeau
5e1a860e6c fs/fat/fat_write: Fix curclust/newclust mix-up
curclust was used instead of newclust in the debug() calls and in one
CHECK_CLUST() call, which could skip a failure case.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:07 -04:00
Benoît Thébaudeau
1d7f2ece69 fs/fat/fat_write: Merge calls to set_cluster()
set_contents() had uselessly split calls to set_cluster(). Merge these
calls, which removes some cases of set_cluster() being called with a
size of zero.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:07 -04:00
Benoît Thébaudeau
8133f43d1c fs/fat/fat_write: Fix buffer alignments
set_cluster() was using a temporary buffer without enforcing its
alignment for DMA and cache. Moreover, it did not check the alignment of
the passed buffer, which can come directly from applicative code or from
the user.

This could cause random data corruption, which has been observed on
i.MX25 writing to an SD card.

Fix this by only passing ARCH_DMA_MINALIGN-aligned buffers to
disk_write(), which requires the introduction of a buffer bouncing
mechanism for the misaligned buffers passed to set_cluster().

By the way, improve the handling of the corresponding return values from
disk_write():
 - print them with debug() in case of error,
 - consider that there is an error is disk_write() returns a smaller
   block count than the requested one, not only if its return value is
   negative.

After this change, set_cluster() and get_cluster() are almost
symmetrical.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:07 -04:00
Gary Bisson
9d2f6a9ae7 fs: ext4: fix symlink read function
Since last API changes for files >2GB, the read of symlink is broken as
ext4fs_read_file now returns 0 instead of the length of the actual read.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2015-09-11 17:15:29 -04:00
Stephen Warren
d56b2015e6 ext4: fix leak in check_filename()
root_first_block_buffer should be free()d in all cases, not just when an
error occurs. Fix the success exit path of the function to do this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:23 -04:00
Stephen Warren
934b14f2bb ext4: free allocations by parse_path()
parse_path() malloc()s the entries in the array it's passed. Those
allocations must be free()d by the caller, ext4fs_get_parent_inode_num().
Add code to do this.

For this to work, all the array entries must be dynamically allocated,
rather than a mix of dynamic and static allocations. Fix parse_path() not
to over-write arr[0] with a pointer to statically allocated data.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:22 -04:00
Stephen Warren
676505f5ce ext4: avoid calling ext4fs_mount() twice, which leaks
ext4_write_file() is only called from the "fs" layer, which calls both
ext4fs_mount() and ext4fs_close() before/after calling ext4_write_file().
Fix ext4_write_file() not to call ext4fs_mount() again, since the mount
operation malloc()s some RAM which is leaked when a second mount call
over-writes the pointer to that data, if no intervening close call is
made.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:22 -04:00
Łukasz Majewski
0a04ed86cf FIX: fat: Provide correct return code from disk_{read|write} to upper layers
It is very common that FAT code is using following pattern:
if (disk_{read|write}() < 0)
        return -1;

Up till now the above code was dead, since disk_{read|write) could only
return value >= 0.
As a result some errors from medium layer (i.e. eMMC/SD) were not caught.

The above behavior was caused by block_{read|write|erase} declared at
struct block_dev_desc (@part.h). It returns unsigned long, where 0
indicates error and > 0 indicates that medium operation was correct.

This patch as error regards 0 returned from block_{read|write|erase}
when nr_blocks is grater than zero. Read/Write operation with nr_blocks=0
should return 0 and hence is not considered as an error.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid XU3 - Exynos 5433
2015-09-11 17:15:21 -04:00
Simon Glass
cf92e05c01 Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header
Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 17:15:20 -04:00
Simon Glass
6e295186c7 Move malloc_cache_aligned() to its own header
At present malloc.h is included everywhere since it recently was added to
common.h in this commit:

   4519668 mtd/nand/ubi: assortment of alignment fixes

This seems wasteful and unnecessary. We have been trying to trim down
common.h and put separate functions into separate header files and that
change goes in the opposite direction.

Move malloc_cache_aligned() to a new header so that this can be avoided.
The header would perhaps be better named as alignmem.h but it needs to be
included after common.h and people might be confused by this. With the name
memalign.h it fits nicely after malloc() in most cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-09-11 17:15:16 -04:00
Stephen Warren
18a10d46f2 fat: handle paths that include ../
The FAT code contains a special case to parse the root directory. This
is needed since the root directory location/layout on disk is special
cased for FAT12/16. In particular, the location and size of the FAT12/16
root directory is hard-coded and contiguous, whereas all FAT12/16 non-root
directories, and all FAT32 directories, are stored in a non-contiguous
fashion, with the layout represented by a linked-list of clusters in the
FAT.

If a file path contains ../ (for example /extlinux/../bcm2835-rpi-cm.dtb),
it is possible to need to parse the root directory for the first element
in the path (requiring application of the special case), then a sub-
directory (in the general way), then re-parse the root directory (again
requiring the special case). However, the current code in U-Boot only
applies the special case for the very first path element, and never for
any later path element. When reparsing the root directory without
applying the special case, any file in a sector (or cluster?) other than
the first sector/cluster of the root directory will not be found.

This change modifies the non-root-dir-parsing loop of do_fat_read_at()
to detect if it's walked back to the root directory, and if so, jumps
back to the special case code that handles parsing of the root directory.

This change was tested using sandbox by executing:

./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/.."
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/.."
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/../"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/../bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /backup/../bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/..backup/../bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/../backup/../bcm2835-rpi-cm.dtb"

(/extlinux and /backup are in different sectors so trigger some different
cases, and bcm2835-rpi-cm.dtb is in a sector of the root directory other
than the first).

In all honesty, this change is a bit of a hack, using goto and all.
However, as demonstrated above it appears to work well in practice, is
quite minimal, likely doesn't introduce any risk of regressions, and
hopefully doesn't introduce any maintenance issues.

The correct fix would be to collapse the root and non-root loops in
do_fat_read_at() and get_dentfromdir() into a single loop that has a
small special-case when moving from one sector to the next, to handle
the layout difference of root/non-root directories. AFAIK all other
aspects of directory parsing are identical. However, that's a much
larger change which needs significantly more thought before it's
implemented.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-09-11 14:05:33 -04:00
Marcel Ziswiler
4519668b29 mtd/nand/ubi: assortment of alignment fixes
Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:

ERROR: v7_dcache_inval_range - start address is not aligned - 0x1f7f0108
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1f7f1108

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Scott Wood <scottwood@freescale.com>
[trini: Add __UBOOT__ hunk to lib/zlib/zutil.c due to malloc.h in common.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-28 12:33:17 -04:00
Max Krummenacher
7a3e70cfd8 fs/fs.c: read up to EOF when len would read past EOF
http://lists.denx.de/pipermail/u-boot/2012-September/134347.html
allows for reading files in chunks from the shell.

When this feature is used to read past the end of a file an error
was returned instead of returning the bytes read up to the end of
file. Thus the following fails in the shell:

offset = 0
len = chunksize
do
	read file, offset, len
	write data
until bytes_read < len

The patch changes the behaviour to printing an informational
message and returning the actual read number of bytes aka read(2)
behaviour for convenient use in U-Boot scripts.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-08-13 07:19:35 -04:00
Mark Tomlinson
10d3ac346f JFFS2: Use merge sort when parsing filesystem
When building the file system the existing code does an insertion into
a linked list. It attempts to speed this up by keeping a pointer to
where the last entry was inserted but it's still slow.

Now the nodes are just inserted into the list without searching
through for the correct place. This unsorted list is then sorted once
using mergesort after all the entries have been added to the list.
This speeds up the scanning of the flash file system considerably.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:32 -04:00
Mark Tomlinson
54a883840b JFFS2: Use CLEANMARKER to reduce scanning time
If a sector has a CLEANMARKER at the beginning, it indicates that the
entire sector has been erased. Therefore, if this is found, we can skip the
entire block. This was not being done before this patch.

The code now does the same as the kernel does when encountering a
CLEANMARKER. It still checks that the next few words are FFFFFFFF, and if
so, the block is assumed to be empty, and so is skipped.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:32 -04:00
Mark Tomlinson
081adef7e6 JFFS2: Change scansize to match linux kernel
The scan code is similar to the linux kernel, but the kernel defines a much
smaller size to scan through before deciding a sector is blank. Assuming
that what is in the kernel is OK, make these two match.

On its own, this change makes no difference to scanning of any sectors
which have a clean marker at the beginning, since the entire sector is not
blank.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:31 -04:00
Mark Tomlinson
c5b1940f57 JFFS2: Optimize building lists during scan
If the flash is slow, reading less from the flash into buffers makes
the process faster.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:31 -04:00
Mark Tomlinson
2d6d93a2dd JFFS2: Improve speed reading flash files
jffs2_1pass_read_inode() would read the entire data for each node
in the filesystem, regardless of whether it was part of the file
to be loaded or not. By only reading the header data for an inode,
and then reading the data only when it is found to be part of the
file to be loaded, much copying of data is saved.

jffs2_1pass_list_inodes() read each inode for every file in the
directory into a buffer. By using NULL as a buffer pointer, NOR
flash simply returns a pointer, and therefore avoids a memory copy.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:30 -04:00
Mark Tomlinson
891224a5d8 JFFS2: Only list each directory entry once
If multiple versions of a file exist, only the most recent version
should be used. The scheme to write 0 for the inode in older versions
did not work, since this would have required writing to flash.

The only time this caused an issue was listing a directory, where older
versions of the file would still be seen. Since the directory entries
are sorted, just look at the next entry in the list, and if it's the same
move to that entry instead.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:30 -04:00
Mark Tomlinson
225cf4cdf9 JFFS2: Speed up and fix comparison functions
Copying complete nodes from flash can be slow if the flash is slow
to read. By only reading the data needed, the sorting operation can
be made much faster.

The directory entry comparison function also had a two bugs. First, it
did not ensure the name was copied, so the name comparison may have
been faulty (although it would have worked with NOR flash).  Second,
setting the ino to zero to ignore the entry did not work, since this
was either writing to a temporary buffer, or (for NOR flash) directly
to flash. Either way, the change was not remembered.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:29 -04:00
Mark Tomlinson
3799b3f4ad JFFS2: Return early when file read not necessary
If a destination is not provided, jffs2_1pass_read_inode() only
returns the length of the file. In this case, avoid reading all
the data nodes, and return as soon as the length of the file is
known.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:29 -04:00
Sjoerd Simons
85300a9a9d sandbox: only do sandboxfs for hostfs interface
Only do sandbox filesystem access when using the hostfs device
interface, rather then falling back to it in all cases. This prevents
confusion situations due to the fallback being taken rather then an
unsupported error being raised.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-19 14:45:56 -06:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Przemyslaw Marczak
22b7509efb fs: ext4 write: return file len on success
After rework of the file system API, the size of ext4
write was missed. This causes printing unreliable write
size at the end of the file system write operation.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2015-03-05 20:49:42 -05:00