Commit graph

13615 commits

Author SHA1 Message Date
Andre Przywara
00f8e9c2da sunxi: Fix is_boot0_magic macro
The is_boot0_magic macro is missing parentheses around the macro
argument, breaking any usage with a more complex argument.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 23:19:34 +00:00
Andre Przywara
23c0ee83aa sunxi: Factor out eGON BROM header description
To be able to easily share the Allwinner eGON BROM header structure
between the tools and the SPL code, move the struct definition into a
separate header file.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2021-01-11 23:19:33 +00:00
Icenowy Zheng
ab3b53f30f sunxi: add PineCube board
PineCube is an IP camera development kit released by Pine64.

It comes with the following compoents:

- A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC,
a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps
Ethernet port and FPC connectors for camera and daughter board.
- An OV5640-based camera module which is connected to the parallel CSI
bus of the mainboard.
- A daughterboard with several buttons, a SD slot, some IR LEDs, a
microphone and a speaker connector.

As the device tree is synchronized in a previous commit, just add it to
Makefile, create a new MAINTAINER item and provide a defconfig.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 23:19:33 +00:00
Tom Rini
d71be19902 Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-11 13:55:03 -05:00
Christian Hewitt
ca62ed2dac ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
Import the Beelink GT-King/Pro and supporting meson-g12b-w400.dtsi file
from Linux 5.10.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Christian Hewitt
d45dba838a ARM: dts: import WeTek Core2 DTs from Linux 5.10
Import the WeTek Core2 and supporting meson-gx-p23x-q20x.dtsi files
from Linux 5.10.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Pascal Vizeli
d42e7964d9 meson: Add soc_rev to environment
Add SoC revision to environment. This can be useful to select the
correct device tree at runtime (N2/N2+).

Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Stefan Agner
cf47c0e23a ARM: meson: isolate loading of socinfo
Move loading of socinfo into a separate function so the value can be
reused later.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Jerome Brunet
ade0100a91 arm64: meson: add support for libretech-cc v2
Add support for the Amlogic based libretech cc version 2.
As version 1, it is based on the s905x SoC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: Fixed libretech-cc.rst bullet points]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Jerome Brunet
4ac6946bac arm64: dts: import libretech-cc-v2 from linux v5.10-rc1
Sync the libretech cc v2 device tree from Linux v5.10-rc1
commit 3650b228f83a ("Linux 5.10-rc1")

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Neil Armstrong
ee73135365 ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
Synced from Linux commit 3650b228f83a ("Linux 5.10-rc1")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Hugh Cole-Baker
92cb207af1 rockchip: pinebook-pro: default to SPI bus 1 for SPI-flash
SPI flash on this machine is located on bus 1, default to using bus 1
for SPI flash and stop aliasing it to bus 0.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob")
2021-01-08 08:40:43 -05:00
Nicolas Ferre
aeaef07c51 ARM: dts: sama7g5ek: fix TXC pin configuration
TXC line is directly connected from the SoC to the KSZ9131 PHY. There
is a transient state on this signal, before configuring it to RGMII,
which leads to packet transmit being blocked.
Keeping a pull-up when muxing this pin as function A (G0_TXCK) fixes
the issue.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
9b614c87bb ARM: dts: sama7g5ek: add i2c1 bus and eeproms
Add node for flx1 i2c1 subnode (and alias to bus 0)
This bus has two eeprom devices connected.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
1c629fd033 ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode
Add flexcom1 and i2c subnode.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
7f4c89cc5c ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
Enable sdmmc0 on this board. A non-removable eMMC is connected on this
block.
Configure pincontrol accordingly.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
523c10c1fd ARM: dts: at91: sama7g5: add node for sdmmc0
Add node for sdmmc0 block.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
9b6f157e19 ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1
SDMMC1 requires clock specification with assigned-clocks, such that
the PMC will know which parent to assign and the initial start-up frequency.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Claudiu Beznea
3e5853e6a1 ARM: dts: sama7g5: add GMAC1
Add GMAC1.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
e95af87e9b ARM: dts: sama7g5: add GMAC0
Add GMAC0.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
7d41a8da84 ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
Add pinctrl for sdmmc1 and flx3.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
47a13af586 ARM: dts: at91: sama7g5: add pinctrl node
Add pioA pinctrl node.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
b032230f87 ARM: dts: sama7g5: add pit64b support
Add DT bindings for PIT64B driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
13f986b748 ARM: dts: sama7g5: add CPU bindings
Add CPU DT bindings.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
394f520709 ARM: dts: sama7g5: switch to PMC bindings
Get rid of software defined MCK and switch to PMC bindings
for IPs currently present in device tree.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
33fa0b6cef ARM: dts: sama7g5: add PMC bindings
Add DT bindings for PMC driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
09f19f7770 ARM: dts: sama7g5: add slow clock bindings
Add DT bindings for slow clock driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
072c975940 ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals
Add dm-pre-reloc DT binding property for cristals.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
5e19ade9e5 ARM: dts: sama7g5: add slow rc and main rc oscillators
Add slow rc and main rc oscillators to dtsi.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
3b86096a59 ARM: dts: sama7g5: move clock frequencies for xtals in board file
Move clock frequencies for crystals on board specific files.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
1d463d6735 board: atmel: sama7g5ek: add initial support for sama7g5ek
Add initial support for sama7g5 evaluation kit board.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
626879b794 ARM: dts: sama7g5: add initial DT for sama7g5 SoC
Add initial basic devicetree for sama7g5 SoC

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Tom Rini
bc0b99bd8b Xilinx changes for v2021.04
arm64:
 - DT updates
 
 microblaze:
 - Add support for NOR device support
 
 spi:
 - Fix unaligned data write issue
 
 nand:
 - Minor code change
 
 xilinx:
 - Fru fix in limit calculation
 - Fill git repo link for all Xilinx boards
 
 video:
 - Add support for seps525 spi display
 
 tools:
 - Minor Vitis file support
 
 cmd/common
 - Minor code indentation fixes
 
 serial:
 - Uartlite debug uart initialization fix
 -----BEGIN PGP SIGNATURE-----
 
 iFsEABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX/ROlgAKCRDKSWXLKUoM
 IRC5AIkBzg4Sz8fQgdCiOK89k7tdFKMAnA9SYhgm4TSCzffZCJwnm78QoGAC
 =4FnY
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.04

arm64:
- DT updates

microblaze:
- Add support for NOR device support

spi:
- Fix unaligned data write issue

nand:
- Minor code change

xilinx:
- Fru fix in limit calculation
- Fill git repo link for all Xilinx boards

video:
- Add support for seps525 spi display

tools:
- Minor Vitis file support

cmd/common
- Minor code indentation fixes

serial:
- Uartlite debug uart initialization fix
2021-01-06 07:57:33 -05:00
Marek Vasut
ec4efd5ae7 ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
correctness of the DT.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-06 11:01:31 +01:00
Marek Vasut
1a6de002e5 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and
using output-low DT property leads to the GPIO being set high instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-06 11:01:31 +01:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
65e25bea59 dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()
In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
20e442ab2d dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.

The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)

It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.

Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
f10643cf8a dm: core: Access device ofnode through functions
At present ofnode is present in the device even if it is never used. With
of-platdata this field is not used, so can be removed. In preparation for
this, change the access to go through inline functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
0fd3d91152 dm: Use access methods for dev/uclass private data
Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-01-05 12:24:40 -07:00
Simon Glass
38d6b7ebda spl: Drop bd_info in the data section
This uses up space in the SPL binary but it always starts as zero. Also
some boards cannot support data in TPL (e.g. Intel Apollo Lake).

Use malloc() to allocate this structure instead, by moving the init a
little later, after malloc() is inited. Make this function optional since
it pulls in malloc().

This reduces the TPL binary size on coral by about 64 bytes

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
2d6bf754ce serial: Rename ns16550 functions to lower case
Lower case should be used for function names. Update this driver and its
callers accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-05 12:24:40 -07:00
Simon Glass
d30c7209df serial: Update NS16550_t and struct NS16550
Typedefs should not be used in U-Boot and structs should be lower case.
Update the code to use struct ns16550 consistently.

Put a header guard on the file while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-05 12:24:40 -07:00
Harini Katakam
0e3a7aa7a9 arm64: zynqmp: Add Ethernet node for zcu1285 revA
This patch add ethernet node gem1 to zcu1285 RevB.
GMII to RGMII converter sits between MAC and external
phy connected over GMII to MAC and RGMMI to external phy

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-05 11:54:53 +01:00
Siva Durga Prasad Paladugu
59fbd5c1f8 arm64: zynqmp: Add ethernet node for zcu1275 revB
This patch add ethernet node gem1 to zcu1275 RevB.
GMII to RGMII converter sits between MAC and external
phy connected over GMII to MAC and RGMMI to external phy.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-05 11:54:44 +01:00
Michal Simek
2d381d2fe2 arm64: zynqmp: Sync DT with Linux kernel
All changes are recorded in lore.kernel.org. Here are links to that patches
for the record.
Link: https://lore.kernel.org/r/f59a63d8cb941592de6d2dee8afa6f120b2e40c8.1601379794.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/f767fe007e446a2299fda9905e75b723c650a424.1605021644.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/20200629081744.13916-1-krzk@kernel.org

And there are other minor changes (just moving things around).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04 10:51:27 +01:00
Sughosh Ganu
e1ee06dde7 qemu: arm: Initialise virtio devices in board_late_init
On the qemu arm platform, the virtio devices are initialised in the
board_init function, which gets called before the initr_pci. With
this sequence, the virtio block devices on the pci bus are not
initialised. Move the initialisation of the virtio devices to
board_late_init which gets called after the call to initr_pci.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-12-31 14:41:31 +01:00
Tom Rini
ab865a8ee5 Fixes for 2021.1
----------------
 
 CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/5680
 
 - fixes for Variscite dart6ul
 - imx8mp : increase malloc area
 - fixes for bx50v3
 - imx8m: HS400ES and UHS for EVK
 - imx8qm-rom7720: fix phy bind
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCX+nFGQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76byvwCcDhQjWcDIHvNkxD4PVjieTVH4VSsAnifKj0td
 C8L36yASIlBRxHH4gpGE
 =39D3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20201227' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2021.1
----------------

CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/5680

- fixes for Variscite dart6ul
- imx8mp : increase malloc area
- fixes for bx50v3
- imx8m: HS400ES and UHS for EVK
- imx8qm-rom7720: fix phy bind
2020-12-28 07:44:03 -05:00
Stefan Roese
ce040932b5 arm: mvebu: armada-xp-gp.dts: Add spi0 alias
For correct spi bus detection the spi0 alias is needed in the DT.
Otherwise this error will ocurr in U-Boot:

Invalid bus 0 (err=-19)
Failed to initialize SPI flash at 0:0 (error -19)

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dennis Gilmore <dgilmore@redhat.com>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
2020-12-28 09:42:06 +01:00
Stefan Roese
33fc6fc105 arm: mvebu: Add armada-xp-gp-u-boot.dtsi for U-Boot properties
Add some missing "u-boot,dm-pre-reloc;" properties to UART0, SPI
controller and SPI NOR flash node to enable usage in SPL. Otherwise
these devices will not be available.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dennis Gilmore <dgilmore@redhat.com>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
2020-12-28 09:42:06 +01:00
Heinrich Schuchardt
e6abe163bf imx: mx7: clock: use correct format strings
Use %u and not %d for unsigned values.
Print kHz and not khz.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26 14:56:09 +01:00
Marc Ferland
37648b600c arm: dart6ul: read and print SoM info from eeprom on startup
The dart6ul has an i2c eeprom at 0x50 which contains, among other
things, the manufacturing/revision/options info of the SoM. This patch
replaces the current checkboard() implementation with a more
exhaustive one based on the content of the eeprom.

Since this code uses the new driver model, some changes were also
required in the DTS to make the nodes related to i2c available before
relocation.

This code was inspired from the supported u-boot code from Variscite
which can be found here:

https://github.com/varigit/uboot-imx/tree/imx_v2018.03_4.14.78_1.0.0_ga_var02

New output example:

Board: PN: VSM-6UL-705B, Assy: AS1812142257, Date: 2019 Feb 17
       Storage: eMMC, Wifi: yes, DDR: 1024 MiB, Rev: 2.4G

Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-26 14:56:09 +01:00
Marc Ferland
d4d7b663b8 arm: dart6ul: change compatible string for eeprom
The eeprom at address 0x50 is a BR24G04NUX-3TTR. It has a
4Kbit (512x8) capacity, change the compatible string to reflect this
fact.

Also, add an alias to easily refer to this eeprom with
fdt_path_offset() which will be in another commit.

Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-26 14:56:09 +01:00
Clément Péron
7d6a36a48d imx: ahab: allow to bypass confirmation for ahab_close cmd
Calling ahab_close cmd force the user to interact for confirmation.

This is not user-friendly when using this cmd during factory process.

Allow the user to pass '-y' option to bypass this confirmation.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-12-26 14:56:09 +01:00
Sebastian Reichel
717bf50f4b board: ge: bx50v3: cleanup phy config
The current PHY rework does the following things:

1. Configure 125MHz clock
2. Setup the TX clock delay (RX is enabled by default),
3. Setup reserved bits to avoid voltage peak

The clock delays are nowadays already configured by the
PHY driver (in ar803x_delay_config). The code for that
can simply be dropped. The clock speed can also be
configured by the PHY driver by adding the device tree
property "qca,clk-out-frequency".

What is left is setting up the undocumented reserved bits
to avoid the voltage peak problem. I slightly improved its
documentation while updating the board's PHY rework code.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-26 14:56:09 +01:00
Andrey Zhizhikin
50b1a69cee ARM: dts: imx8m: add UHS or HS400/HS400ES properties
i.MX8M series provide support for high speed grades in their
usdhc controllers, which has eMMC and SDHC connected to them.

Enable this support across the entire i.MX8M family by providing quirks
to usdhc controllers designated by storage media connected to them.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
2020-12-26 12:36:35 +01:00
Andrey Zhizhikin
247bbeb74c ARM: dts: imx8m: increase off-on delay on the SD Vcc regulator
Some SD Card controller and power circuitry has increased capacitance,
which keeps the internal logic remains powered after regulator is switch
off. This is generally the case when card is switched to SD104 mode,
where a power cycle should be performed. In case if the card internal
logic remains powered, it causes a subsequent failure of mode
transition, effectively leading to failed enumeration.

Introduce a delay of 20 msec in order to provide a possibility for
internal card circuitry to drain voltages and perform a power cycle
correctly.

Similar fix is done in commit c49d0ac38a ("ARM: dts: rmobile: Increase
off-on delay on the SD Vcc regulator") targeted Renesas SOCs.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-12-26 12:36:19 +01:00
Adam Ford
1170d2b759 arm64: dts: imx8mm-beacon: Re-sync dts file with Linux 5.10-rc6
There have been some updates to the device trees, so re-sync.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-12-26 12:35:58 +01:00
Adam Ford
15d79fcac0 arm: dts: imx8mm: sync dts from Linux Kernel 5.10-rc6
There have been some updates to the device tree since 5.6.
This also includes some clocks, and makes it easier to keep
board device tree files in sync with Linux

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-12-26 12:35:49 +01:00
Oliver Graute
2055103f08 ARM: dts: imx: imx8qm-rom7720: Fix AR8031 phy-mode
Fixed wrong PHY Interface Mode

    As per kernel commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode)
    the correct phy-mode should be "rgmii-id", so fix it accordingly
    to fix the Ethernet regression.

    This problem has been exposed by commit:

    commit 13114f38e2

    Fix the phy-mode accordingly to fix the regression.

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
2020-12-26 12:35:25 +01:00
Michael Walle
e668bec96a board: kontron: sl28: reorder mmc devices
Since linux commit 2e6cde96873253fd9eb0f20afd8ffd18278cff75 ("arm64:
dts: ls1028a: make the eMMC and SD card controllers use fixed indices")
mmc0 is the eMMC and mmc1 is the SD card. Also swap it in u-boot to
avoid any confusion by the user and to be aligned with linux.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-20 16:53:25 -05:00
Simon Glass
991759196f dm: Drop the unused arg in uclass_find_device_by_seq()
Now that there is only one sequence number (rather than both requested and
assigned ones) we can simplify this function. Also update its caller to
simplify the logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
8b85dfc675 dm: Avoid accessing seq directly
At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.

The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Tom Rini
549e7cb708 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi 2020-12-18 13:06:02 -05:00
Marek Szyprowski
21a1bc6a90 ARM: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
pin to the high impedance mode, otherwise the board is stuck in the
middle of loading early stages of the bootloader from SD card.

This can be achieved by using the OPEN_DRAIN flag instead if the
ACTIVE_HIGH, what will leave the pin in input to achieve high state (pin
has the pull-up) and solve the issue.

Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-12-18 11:50:27 +01:00
Sean Anderson
237e5880f8 spi: dw: Add SoC-specific compatible strings
This adds SoC-specific compatible strings to all users of the designware
spi device. This will allow for the correct driver to be selected for each
device. Where it is publicly documented, a compatible string for the
specific device version has also been added. Devices without
publicly-documented device versions include MSCC SoCs, and Arc Socs. All
compatible strings except those for SoCFPGAs and some of the versioned
strings have been taken from Linux.

Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly
necessary. However, it is a good cleanup and brings things closer to Linux.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Simon Glass
8a8d24bdf1 dm: treewide: Rename ..._platdata variables to just ..._plat
Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
d1998a9fde dm: treewide: Rename ofdata_to_platdata() to of_to_plat()
This name is far too long. Rename it to remove the 'data' bits. This makes
it consistent with the platdata->plat rename.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
c69cda25c9 dm: treewide: Rename dev_get_platdata() to dev_get_plat()
Rename this to be consistent with the change from 'platdata'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Simon Glass
41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00
Tom Rini
5a1a8a63be Second set of u-boot-atmel fixes for 2021.01 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAl/TlVUcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyK8eB/9mIJCgCiDue2ytkUg+
 fyJHHtHf+rFIbvLiR+iVy/2rXlsjfXwNVyJTswJOCucit0cf+F7fh6vi/AnOoDnE
 Zezj9ngm+25fvffQjt0T74V2w+GhT5OXqR7ctpIcrmKun2UTujSA9NQqRaLFDI9x
 RQlUXsCzLypFZRXvyOCo34Nz7MZ1QvIAKxEJyYb7ft/qnbtILDr0p54xxjlK5B/W
 s+MP05qaRmup9rk33JwfLmeyjTmDBuri0rBh/2XKFtszJBm5CdgXJEqNY+22JzJF
 xlqfobmdPn77+JH36B/KJgDmrrL05vv+RyvOPoBNzm6BEKtlflcSf9NnTKlSud4y
 w/50
 =r687
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel fixes for 2021.01 cycle

This set includes very important fixes for: MMC booting on several
boards, drive strength on sam9x60ek mmc lines, compile issues for
timer.c old driver, removal of unwanted access to sam9x60 bit for
oscillator bypass mode, and eeproms read on sama5d2_icp.
2020-12-11 15:55:17 -05:00
Eugen Hristev
bb5eedbc7f ARM: dts: at91: sama5d2_icp: fix i2c eeprom compatible
The correct compatible for this eeproms is microchip,24aa02e48
The previous compatible string was working up to U-boot 2020.04.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
2020-12-11 17:47:21 +02:00
Aleksandar Gerasimovski
2ef53647d1 arm: ls102xa: select USB PHY erratum's only if USB is enabled
The USB support is not by default enabled on all designs, so it does not
make seance to have USB specific erratum's enabled on such a designs.

On our internal Hitachi-Powergrids design not using the USB controller
there is a crash when accessing those specific memory locations selected
by the erratum flags.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Alban Bedel
cbf77d2018 armv8: fsl-layerscape: Fix automatic setting of bootmcd with TF-A
When booting from TF-A there is a logic that attempt to detect if the
default environment is used, if this is the case it then set the
`bootcmd` and `mcinitcmd` depending of the device we booted from.
This detection logic is dubious as it access internals of the env
implementation and it doesn't always work correctly.

First of all it detect any valid environment as not being the
default, so after running `env default -a && saveenv` the board
doesn't boot anymore as `bootcmd` is then empty.
But it also fails in some other ways, for example it always detect a
default environment when redundant env is enabled on MMC, so in that
case `bootcmd` is overwritten on every boot.

Instead of increasing the complexity of the detection just check if
`bootcmd` and `mcinitcmd` are set in the environment and set them if
they are not.

Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Priyanka Singh
03d095e87d layerscape: fdt.c: Check for NULL return value from fdt_getprop()
Check for NULL return value from fdt_getprop() in
fdt_fixup_remove_jr()

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
[Fixed checkpatch errors/warnings]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
9ed303dfa9 armv8: lx2162aqds: Add support for LX2162AQDS platform
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
3a187cff7a armv8: lx2162a: Add Soc changes to support LX2162A
LX2162 is LX2160 based SoC, it has same die as of LX2160
with different packaging.

LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module,
microSD card, eMMC support, serial console, qspi nor flash, qsgmii,
sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes
interface to support three PCIe gen3 interface.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Fixed whitespace errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
4c72d2d53b arm: dts: ls1028a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
04c2d93d36 arm: dts: ls1043a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
6ba8b6a8f8 arm: dts: ls1012a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
7dfc20ab1d arm: dts: ls1088a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
ba45dd21f3 arm: dts: ls2080a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
2adb7970cb arm: dts: ls1046a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Wasim Khan
6519ccd282 arm: dts: lx2160a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:38 +05:30
Tom Rini
2a42de6df1 - Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board
- Update ARM STI and ARM STM STM32MP Arch maintainers emails
 - Enable internal pull-ups for SDMMC1 on DHCOM SoM
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl/Q5aAACgkQ4rK92eCq
 k3XuqAgAifJcb3NxKmWa4eFDbZpWZ1R8h6FPp6vlmvyC4C3otRHEe5WrYCsAeqy1
 Gs311dtdluc4y5Ltmf54OcN7ICfLsSiOvye85f5myhPj1v4d1F1Z70X0FDo/o9hE
 7TEZfWBQtNjXI4F23+vaDT4jCvUZV1LR6Lab/zLLw1/uLUxxS799kcFiWgHLuEoH
 8Cv0JbgzLuuVk5lyLJ+DFZOcntwWu5+Qm+l5eS46armbKphMFh5KPJ9PG81eJE3N
 zsCpavEs4nuQl7wGF8HPfDWxz5Xef6ip3A4Owh92t3WQWKxp1bSUKqDeKZTkhIyS
 LSJKe9CQ9+zCS3m3Utoi1pVt1EbFrQ==
 =cgbE
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20201209' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board
- Update ARM STI and ARM STM STM32MP Arch maintainers emails
- Enable internal pull-ups for SDMMC1 on DHCOM SoM
2020-12-09 11:36:41 -05:00
Marek Vasut
9b36b7dc96 ARM: dts: stm32: Add USB OTG ID pin on DH AV96
Add USB OTG ID pin mux and switch the USB OTG port
from peripheral to OTG mode.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09 10:57:50 +01:00
Marek Vasut
1399be91cb ARM: dts: stm32: Enable SDMMC3 on DH DRC02
The DH DRC02 board has an on-board microSD slot,
add DT properties to enable the slot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09 10:57:50 +01:00
Marek Vasut
75df748b87 ARM: dts: stm32: Disable SDMMC1 CKIN feedback clock
The STM32MP1 DHCOM SoM can be built with either bus voltage level shifter
or without one on the SDMMC1 interface. Because the SDMMC1 interface is
limited to 50 MHz and hence SD high-speed anyway, disable the SD feedback
clock to permit operation of the same U-Boot image on both SoM with and
without voltage level shifter.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09 10:57:50 +01:00
Marek Vasut
845c6720ec ARM: dts: stm32: Enable internal pull-ups for SDMMC1 on DHCOM SoM
The default state of SD bus and clock line is logical HI. SD card IO is
open-drain and pulls the bus lines LO. Always enable the SD bus pull ups
to guarantee this behavior on DHCOM SoM. Note that on SoMs with SD bus
voltage level shifter, the pull ups are built into the level shifter,
however that has no negative impact.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09 10:57:50 +01:00
Patrice Chotard
0f8106f8e0 treewide: Update email address Patrick Delaunay and Patrice Chotard
Update Patrick and my email address with the one dedicated to
upstream activities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09 10:57:50 +01:00
Tom Rini
19ea606109 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2020-12-08 09:53:03 -05:00
Tom Rini
ec79f5ce22 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Espressobin: Simplify DT handling of board variants (Pali)
- Add Luka Perkov to maintainers of Puzzle-M801 (Luka)
- Armada 38x: Enable board specific USB2 high-speed impedance
  threshold configuration (Joshua)
2020-12-07 11:46:12 -05:00
Pali Rohár
135973967b arm: mvebu: Espressobin: Add support for emmc into dts file
To simplify setup, configuration and compilation of u-boot, define emmc
node for all Espressobin boards. Espressobin boards without populated emmc
works correctly, just detection and initialization of emmc obviously fails.

Code for emmc is extracted from commit f1a43c84a9 ("arm64: dts: a3720:
add support for espressobin with populated emmc").

Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Gérald Kerma <gerald@gk2.net>
2020-12-07 07:11:37 +01:00
Pali Rohár
c5c4b69857 Revert "arm64: dts: a3720: add support for espressobin with populated emmc"
This reverts commit f1a43c84a9.
2020-12-07 07:11:37 +01:00
Pali Rohár
338c5ee26a Revert "arm64: dts: armada-3720-espressobin: split common parts to .dtsi"
This reverts commit 03bb6a9b1e.
2020-12-07 07:11:37 +01:00
Joshua Scott
28f0cbcdd2 arm: mvebu: a38x: Configurable USB2 high-speed impedance threshold
Hardware testing of a board using the Armada 385 has shown that an
impedance threshold setting of 0x7 performs better in an eye-diagram
test than with Marvell's recommended value 0x6.

As other boards may still perform better with Marvell's reccomended value,
a configuration option is added with a default value of 0x6.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-07 07:11:37 +01:00
Marcel Ziswiler
2f36a693e3 imx8: allow overriding memory layout
Introduce weak function board_mem_get_layout() which allows overriding
the memory layout from board code in runtime, useful for handling
different SKU versions.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00
Igor Opaniuk
a51fdba3fa board: toradex: add apalis-imx8x 2gb wb it v1.1a module support
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB
IT V1.1A System on Module support [1].

Boot log:
U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300)
CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial@5a070000
Out:   serial@5a070000
Err:   serial@5a070000
Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A,
Serial# 06617018
Net:   eth0: ethernet@5b040000 [PRIME]
Hit any key to stop autoboot:  0

Functionality wise the following is known to be working:
  - eMMC and MMC/SD card
  - Ethernet (*)
  - GPIOs
  - I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

* With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
ETH PHY encounters bring up problems after reset, this will be fixed
soon on SCU FW side.

[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00