A unit test is supplied to test the support for the EFI_LOAD_FILE_PROTOCOL
and the EFI_LOAD_FILE2_PROTOCOL by the LoadImage() boot service.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The EFI_LOAD_FILE_PROTOCOL_GUID and EFI_LOAD_FILE2_PROTOCOL_GUID are needed
to complement the implementation of the LoadFile() boot service.
Remove a duplicate declaration of a variable for the
EFI_LOAD_FILE2_PROTOCOL_GUID.
Move the remaining declaration to efi_boottime.c.
Add a variable for the EFI_LOAD_FILE_PROTOCOL_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When calling ExitBootServices during out unit tests we should not detach
devices as we need console output for runtime tests.
Fixes: 529441ca89 ("efi_loader: Disable devices before handing over control")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For validating the fixed up device tree we need a tool to need to save it
to a file.
dtbdump.efi copies the configuration table with the device tree to a file
on the same partition from which dtbdump.efi was invoked. The file name can
be entered on the console.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When we do not execute a test requiring ExitBootServices do not reset the
system after testing.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Print the CRC32 loaded via the EFI_LOAD_FILE2_PROTOCOL as a hexadecimal
number.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
On RISC-V check that the /chosen node has a boot-hartid property.
To run the test configure with CONFIG_CMD_BOOTEFI_SELFTEST=y and issue
setenv efi_selftest device tree
setenv serial# myserial
bootefi selftest
If the test succeeds, it reports the boot-hartid, e.g.
boot-hartid: 1
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Allow specifying the node on which a property is searched.
Test the device tree consistency more rigorously.
Some efi_st_printf() calls have been converted to efi_st_error().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Before calling do_reset() in the EFI selftest we must restore the global
data pointer.
Fixes: fa63753f86 ("efi_selftest: substitute ResetSystem() by do_reset()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The unit test will reset the system by calling the ResetSystem() runtime
service before or after ExitBootServices() according to the users choice
by setting environment variable efi_selftest to:
* 'reset system' or
* 'reset system runtime'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Do not execute the block device test if CONFIG_DOS_PARTITION=n.
Imply CONFIG_DOS_PARTITION in Kconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
As variable services are available at runtime we have to expect EFI_SUCCESS
when calling the services.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.
Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.
Signed-off-by: Simon Glass <sjg@chromium.org>
According to the UEFI spec ACPI tables should be placed in
EfiACPIReclaimMemory. Let's do the same with the device tree.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Grant Likely <grant.likely@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
GetNextVariableName should report the length of the variable including the
final 0x0000 in bytes.
Check this in the unit test.
Increase the buffer size for variable names. 40 bytes is too short.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test loading an initial ramdisk using the
EFI_LOAD_FILE2_PROTOCOL. The test is only executed on request.
An example usage - given a file image with a file system in partition 1
holding file initrd - is:
* Configure the sandbox with
CONFIG_EFI_SELFTEST=y
CONFIG_EFI_LOAD_FILE2_INITRD=y
CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
* Run ./u-boot and execute
host bind 0 image
setenv efi_selftest load initrd
bootefi selftest
This would provide a test output like:
Testing EFI API implementation
Selected test: 'load initrd'
Setting up 'load initrd'
Setting up 'load initrd' succeeded
Executing 'load initrd'
Loaded 12378613 bytes
CRC32 2997478465
Executing 'load initrd' succeeded
Now the size and CRC32 can be compared to the provided file.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Use the correct protocol in efi_uc_stop() when detaching the driver from
the controller.
Change the block IO unit test for the block device driver to throw an error
instead of a todo if teardown fails.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For automating testing we should be able to power off the test system.
The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff()
function which is only available if CONFIG_CMD_POWEROFF=y.
Enable CONFIG_CMD_POWEROFF if PSCI reset is available.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test for the EFI_RNG_PROTOCOL.
The list of algorithms is read. Two random numbers are generated. The test
checks that the two numbers differ.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add the following file to .gitignore
efi_miniapp_file_image_exception.h
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Use efi_miniapp_*.h instead of file enumeration.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Drop inclusion of crc.h in common.h and use the correct header directly
instead.
With this we can drop the conflicting definition in fw_env.h and rely on
the crc.h header, which is already included.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
As we can build relocation code for the sandbox now we should enable the
unit tests that had to be disabled up to now.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The UEFI spec has this sentence:
"Variables that have runtime access but that are not nonvolatile are
read-only data variables once ExitBootServices() is performed."
At least EDK2 therefore treats variable PlatformLangCodes only as read-only
at runtime. Nowhere do we make this variable read-only in U-Boot.
Do not use variable PlatformLangCodes for testing if the read only
attribute of variables is observed before ExitBootServices().
Fixes: 5a24239c95 ("efi_loader: selftest: enable APPEND_WRITE tests")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Errors should not only be announced as text but should also result in
EFI_ST_FAILURE being returned.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Now that APPEND_WRITE is supported,
the result check for the only existing test case should be changed to
'todo' to 'error', while two more test cases are added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The network should start in status EfiSimpleNetworkStopped.
Add and correct status checks in the simple network protocol.
Correct the unit test:
* Shutdown() and Stop() during setup if needed
* invoke Shutdown() before Stop() when tearing down
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Check that when the WaitForPacket event occurs
EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT is set.
Check the return value of Receive().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
To fully demonstrate crash outputs for UEFI images provide a standalone
UEFI application that tries to invoke an illegal opcode.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
We read the address map before assigning the memory for the pages that will
be mapped to virtual addresses. So these pages will overlap with the entry
for EFI_CONVENTIONAL_MEMORY. We have to ensure that every page is described
at most once in the map.
Remove EFI_CONVENTIONAL_MEMORY from the map that we pass to
SetVirtualAddressMap().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test for SetVirtualAddressMap() and ConvertPointer().
As ConvertPointer() is not implemented yet this will spit out some
warnings.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Boot services are not available after calling ExitBootServices(). So we
should not try to close an event here.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Provide a unit test for the variable services at runtime.
Currently we expect EFI_UNSUPPORTED to be returned as the runtime
implementation is still missing.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The current short description has a typo. Let it stand out clear that we
provide unit tests.
Improve the description of the CMD_BOOTEFI_SELFTEST configuration option.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the
mode information structure.
Adjust the unit test to free the buffer.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
If any member of the event group is signaled, all members must be set to
signaled and their notification functions have to be queued.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test that checks that the open protocol information is
correctly updated when opening and closing protocols.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The GetTime() and the SetTime() runtime services are not obligatory. So
let's make them customizable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When a protocol is installed the handle should be queued for the
registration key of each registered event. LocateHandle() should return the
first handle from the queue for the registration key and delete it from the
queue.
Implement the queueing.
Correct the selftest.
With the patch the UEFI SCT tests for LocateHandle() are passed without
failure.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The error here should be marked *todo*.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Implement the SetTime() runtime service.
Extend the real time clock selftest to check setting the clock.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Rename variables to make it clear they refer to the Unicode collation
protocol identified by the EFI_UNICODE_PROTOCOL2_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The device path to text protocol is not needed for EBBR compliance. So
let's make it a customizable option.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The Unicode collation protocol is not needed for EBBR compliance. So let's
make it a customizable option.
The Unicode capitalization table is only needed by this protocol. So let it
depend on the Unicode collation protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Function memcmp() is available in efi_freestanding.c. So we do not remove a
further implementation.
Replace all usages of efi_st_memcmp() by memcmp().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The EBBR specification prescribes that we should have either an ACPI table
or a device tree but not both. Let us enforce this condition in the
`bootefi` command.
If the bootefi command is called without a device tree parameter use a
previously device tree or fall back to the internal device tree.
The fdt unit test should not be run on boards with an ACPI table.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The EBBR specification prescribes that we should have either an ACPI table
or a device tree but not both.
So do not run the device tree unit test on boards with an ACPI table.
Hence there is no need any longer to make it 'on request' only.
Do not pass $fdtcontroladdr to `bootefi selftest`.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
We should consistently use the same name for protocol GUIDs as defined in
the UEFI specification. Not adhering to this rule has led to duplicate
definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID.
Adjust misnamed protocol GUIDs.
Adjust the text for the graphics output protocol in the output of the
`efidebug dh` command.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
In a previous patch the memory type used for the FDT has been changed to
boot services data. We have to adjust the test.
Correct an incorrect comment. The tested services are boot services.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
At boottime physical and virtual addresses must match. Add a corresponding
check to the memory unit test.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
In efi_selftest_start_image_exit.c test the image_base and image_size are
correctly set in the loaded image protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The check testing the string result of get_string() returned the wrong
result. The result was ignored.
Use efi_st_strcmp_16_8() for the string comparison.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Since commit f51a226436 ("efi_loader: provide freestanding library") in
parallel builds errors
lib/efi_selftest/../efi_loader/efi_freestanding.o:
file not recognized: File truncated
occur. Obviously make cannot correctly sequence parallel builds with a
dependency like ../efi_loader/efi_freestanding.o.
Fixes: f51a226436 ("efi_loader: provide freestanding library")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test that calls LoadImage() with a file device path and
executes the application via StartImage().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
In efi_selftest we are in EFI land. We cannot call U-Boot library
functions malloc() and free() but should use the boot time services
instead.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
In efi_selftest we are in EFI land. We should not use U-Boot library
functions but boot time services for memory management.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Heinrich ran into issues with HII and iPXE which lead to #SErrors on
his Odroid-C2 system. We definitely do not want to regress just yet,
so let's not expose the HII protocols by default.
Instead, let's make it a config option that people can play with
This way, we can stabilize the code in tree without breaking any
users.
Once someone figures out, why this breaks iPXE (probably a NULL
dereference), we can enable it by default.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Remove HII selftest as well
v2 -> v3:
- Make config option
efi_st_printf() does not support format code %ld. Anyway the format code
for size_t would be %zu which isn't supported either.
We do not want any divisions to avoid invalid references to integer
arithmetic routines, cf.
https://gcc.gnu.org/onlinedocs/gccint/Integer-library-routines.html.
As a simple remedy remove the noisy messages from the output.
They are not relevant for automated testing.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This efi_selftest tests HII database protocol and HII string protocol.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Symbolic links are not supported on all file systems, e.g. not on FAT. So
it is not wise to use them in our source tree.
Use a qualified path to refer to lib/efi_loader/efi_freestanding.c in
scripts/Makefile.lib instead.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: Fix build with O=]
Signed-off-by: Alexander Graf <agraf@suse.de>
GCC requires that freestanding programs provide memcpy(), memmove(),
memset(), and memcmp().
Add the library functions when building a *.efi files.
The EFI selftests might use other compilation flags. So use a symbolic
link to provide lib/efi_selftest/efi_freestanding.c and compile it
separately.
Reported-by: Alexander Graf <agraf@suse.de>
Fixes: 5be444d14b38 ("efi_loader: consistent build flags for EFI applications")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is a bug in efi variables test.
Fix it with some cosmetic improvements.
Please note that efi variables test still fails at QueryVariableInfo()
and GetVariable(), but this is not due to a change in this patch.
==8<==
Testing EFI API implementation
Selected test: 'variables'
Setting up 'variables'
Setting up 'variables' succeeded
Executing 'variables'
.../u-boot/lib/efi_selftest/efi_selftest_variables.c(60):
TODO: QueryVariableInfo failed
.../u-boot/lib/efi_selftest/efi_selftest_variables.c(131):
TODO: GetVariable returned wrong length 7
.../u-boot/lib/efi_selftest/efi_selftest_variables.c(133):
TODO: GetVariable returned wrong value
Executing 'variables' succeeded
Boot services terminated
Summary: 0 failures
==>8==
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the same time adding and removing the -Os flag does not make any sense.
Actually it leads to -Os not being used.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
UTF-16 strings in our code should all be u16 *. Fix an inconsistency for
file names which may lead to a warning for printf("%ls", ).
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
For some API calls checks for the return values are missing.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
For some API calls checks for the return values are missing.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Running the simple network protocol test on the sandbox requires setting
the environment variable ethact to a network interface connected to a DHCP
server and ethrotate to 'no'. So let's make it an on-request test on the
sandbox (selectable by setting environment variable efi_selftest).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The runtime variable services never change GUIDs. So we should declare
the GUID parameters as constant.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
ARMv7-M only supports the Thumb instruction set. Our current crt0 code does
not support it. With the patch we can build all unit tests of the EFI
subsystem that do not require crt0.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reading the position in a file after closing the same results in a read
after free.
Correct the sequence in the test.
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The variable name setup_ok might suggest a boolean with true indicating
OK. Let's avoid the misleading name.
%s/setup_ok/setup_status/g
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
To use the simple network protocol we have to call the start service first
and the initialize service second.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Check that the memory area containing the device tree is marked as runtime
data.
Update the Python test to pass ${fdtcontroladdr} to bootefi.
Update the description of the Python test.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable building the sandbox with CONFIG_EFI_SELFTEST.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This unit test checks the following runtime services:
AllocatePages, FreePages, GetMemoryMap
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
We should use a logical or when combining logical values.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Using %zu for efi_intn_t (ssize_t) creates a build warning. Anyway %zu is
not supported by efi_st_error(). So let's convert to int.
Our implementation of StriColl() only returns -1, 0, or 1.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Linker generated arrays may be stored in code sections of memory that are
not writable. So let's allocate setup_ok as an array at runtime.
This avoids an illegal memory access observed in the sandbox.
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
If UninstallMultipleProtocolInterfaces fails, we sometimes return the wrong
status code. The UEFI spec mandates to always return EFI_INVALID_PARAMETER.
Update unit test.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
All our handles point to a struct efi_object. So let's define the
efi_handle_t accordingly. This helps us to discover coding errors much
more easily. This becomes evident by the corrections to the usage of
handles in this patch.
Rename variable image_handle to image_obj where applicable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
fix typos
correct the header comment of efi_selftest_variables.c
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Test the handling of execptions by trying to execute an undefined
instruction. For 32bit ARM we expect \selftest to be listed as loaded
image.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
We should not make anything in lib/efi_selftest if
CONFIG_CMD_BOOTEFI_SELFTEST is not defined.
We can make that test in lib/Makefile
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
When the last protocol interface is uninstalled the handle is deleted but
this does not set the value of the handle to NULL.
To create a new handle with OpenProtocolInterface the value of the handle
must be NULL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The UEFI spec requires that file positions are passed as u64 in
GetPosition() and SetPosition().
Check if the file handle points to a directory in GetPosition().
Provide a unit test for GetPosition() and SetPosition().
Fix Coverity warning CID 184079 (CONSTANT_EXPRESSION_RESULT).
Add comments.
Fixes: b6dd577737 ("efi_loader: use correct types in EFI_FILE_PROTOCOL")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The EFI selftest does not succeed on Sandbox yet. The network support
seems to need some love to actually make our current tests succeed.
So let's disable running the selftest on sandbox for now until "make
tests" just works. Then we can have more amazing CI than ever.
Signed-off-by: Alexander Graf <agraf@suse.de>
gcc 4.8.4 wants to see all levels of braces when initializing a
structure to zeros.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use a key notification function to leave the
EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL test.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
