Commit graph

2253 commits

Author SHA1 Message Date
Tom Rini
0c9cc5155c Merge branch '2019-10-11-master-imports'
- Assorted cleanups
- FAT bugfixes
- mediatek platform updates
2019-10-12 10:10:59 -04:00
Tom Rini
ee8da596eb sandbox: Remove sandbox_noblk build
At this point, all drivers that do not use CONFIG_BLK are past their
migration deadlines, so remove this config as it's no longer helpful and
hinders enhancing block drivers.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-11 19:05:14 -04:00
Tero Kristo
260777fc23 clk: cdce9xx: add support for cdce9xx clock synthesizer
Add support for CDCE913/925/937/949 family of devices. These are modular
PLL-based low cost, high performance, programmable clock synthesizers,
multipliers and dividers. They generate up to 9 output clocks from a
single input frequency. The initial version of the driver does not
support programming of the PLLs, and thus they run in the bypass mode
only. The code is loosely based on the linux kernel cdce9xx driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Ryder Lee
4024006e52 dt-bindings: phy: add a document for MediaTek tphy
This adds a document for tphy which supports physical layer
functionality for a number of controllers on MediaTek SoCs,
such as, USB2.0, USB3.0, PCIe, and SATA.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Ryder Lee
825c47ee9d dt-bindings: pcie: add a document for MT7623 PCIe controller
This adds a document for MT7623 PCIe controller.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Suman Anna
e18fb7dd5c dt-bindings: remoteproc: Add bindings for DSP C66x clusters on TI K3 SoCs
Some Texas Instruments K3 family of SoCs have one of more Digital Signal
Processor (DSP) subsystems that are comprised of either a TMS320C66x
CorePac and/or a next-generation TMS320C71x CorePac processor subsystem.
Add the device tree bindings document for the C66x DSP devices on these
SoCs. The added example illustrates the DT nodes for the first C66x DSP
device present on the K3 J721E family of SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
Suman Anna
471c2d5e22 dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
The Texas Instruments K3 family of SoCs have one of more dual-core
Arm Cortex R5F processor subsystems/clusters (R5FSS). Add the device
tree bindings document for these R5F subsystem devices. These R5F
processors do not have an MMU, and so require fixed memory carveout
regions matching the firmware image addresses. The nodes require more
than one memory region, with the first memory region used for DMA
allocations at runtime. The remaining memory regions are reserved
and are used for the loading and running of the R5F remote processors.

The added example illustrates the DT nodes for the single R5FSS device
present on K3 AM65x family of SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
Tom Rini
44fb0d6c9f Xilinx/FPGA changes for v2020.01
FPGA:
 - Enable fpga loading on Versal
 - Minor fix
 
 Microblaze:
 - Fix LMB configurations to support initrds
 - Some other cleanups
 
 Zynq:
 - Minor config/dt changes
 - Add distro boot support for usb1 and mmc1
 - Remove Xilinx private boot commands and use only distro boot
 
 ZynqMP:
 - Kconfig cleanups, defconfig updates
 - Update some dt files
 - Add firmware driver for talking to PMUFW
 - Extend distro boot support for jtag
 - Add new IDs
 - Add system controller configurations
 - Convert code to talk firmware via mailbox or SMCs
 
 Versal:
 - Add board_late_init()
 - Add run time DT memory setup
 - Add DFU support
 - Extend distro boot support for jtag and dfu
 - Add clock driver
 - Tune mini configurations
 
 Xilinx:
 - Improve documentation (boot scripts, dt binding)
 - Enable run time initrd_high calculation
 - Define default SYS_PROMPT
 - Add zynq/zynqmp virtual defconfig
 
 Drivers:
 - Add Xilinx mailbox driver for talking to firmware
 - Clean zynq_gem for Versal
 - Move ZYNQ_HISPD_BROKEN to Kconfig
 - Wire genphy_init() in phy.c
 - Add Xilinx gii2rgmii bridge
 - Cleanup zynq_sdhci
 - dwc3 fix
 - zynq_gpio fix
 - axi_emac fix
 
 Others:
 - apalis-tk1 - clean config file
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXZ2mcwAKCRDKSWXLKUoM
 IT/KAJ4tL49YwINqCVGd7gafWvdfC4htygCcCgr9gLnJ+LjDQkxWT/r6faIcL00=
 =OnMk
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01

FPGA:
- Enable fpga loading on Versal
- Minor fix

Microblaze:
- Fix LMB configurations to support initrds
- Some other cleanups

Zynq:
- Minor config/dt changes
- Add distro boot support for usb1 and mmc1
- Remove Xilinx private boot commands and use only distro boot

ZynqMP:
- Kconfig cleanups, defconfig updates
- Update some dt files
- Add firmware driver for talking to PMUFW
- Extend distro boot support for jtag
- Add new IDs
- Add system controller configurations
- Convert code to talk firmware via mailbox or SMCs

Versal:
- Add board_late_init()
- Add run time DT memory setup
- Add DFU support
- Extend distro boot support for jtag and dfu
- Add clock driver
- Tune mini configurations

Xilinx:
- Improve documentation (boot scripts, dt binding)
- Enable run time initrd_high calculation
- Define default SYS_PROMPT
- Add zynq/zynqmp virtual defconfig

Drivers:
- Add Xilinx mailbox driver for talking to firmware
- Clean zynq_gem for Versal
- Move ZYNQ_HISPD_BROKEN to Kconfig
- Wire genphy_init() in phy.c
- Add Xilinx gii2rgmii bridge
- Cleanup zynq_sdhci
- dwc3 fix
- zynq_gpio fix
- axi_emac fix

Others:
- apalis-tk1 - clean config file
2019-10-09 16:22:03 -04:00
Tom Rini
eaa0bde051 u-boot-imx-20191009
-------------------
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532
 
 - MX6UL / ULZ
 - Toradex board
 - Allow to set OCRAM for MX6Q/D
 - MX7ULP
 - MX8: (container image, imx8mq_mek), SCU API
 - fix several board booting from SD/EMMC (cubox-i for example)
 - pico boards
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2dlTAPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3yfgL/1b4pKCwxswK42XkPpdHN1u/v2W/PVDanl/H
 EYxlluHVFH23bLTjLvrrgQjAnZD1VQhxWq3bwCMoJ8vb9tYQ3d9vq7XADQ0WVQV+
 EfhE33fVRPRT3rEdhDKWm+y1mL8YPvYEBnr9li7qU9n1VxiwONPXxMXMqoo9/lbM
 b6lJaG5KkuK8Ofx3cYFVQeAEdsFYIJ2aXtTqsqrV9o2sjruOuG3Ux+6Ov+9O0crY
 q8MXvW6kwWkVVNriVV7Yal0pomPZfMTqft007En9Mv2FtXqMeCWZ4Xh2LtRylR7n
 ruIbo94jkPuwuZ0p/6SeiyopoG/hU/skrkJv1s8W70DOsyaunP2BsveYXEjMV2Rb
 DomotcJit9Ws6P7rOP1oI8OvxSxVN8n6mo23UviZd8MjNAmOm49BtSxVGGB+pwmr
 ufGFG4MGQ5VpCxmzh6KrJCLXpI/mhKrkBkZy58cUbus7aPv3es/jBmmtGlU3m6ka
 NlEzHOX1hpJV/lhLvxjqRhVxuXvXOA==
 =+e3p
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191009' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191009
-------------------

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532

- MX6UL / ULZ
- Toradex board
- Allow to set OCRAM for MX6Q/D
- MX7ULP
- MX8: (container image, imx8mq_mek), SCU API
- fix several board booting from SD/EMMC (cubox-i for example)
- pico boards

[trini: display5 merged manually]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-09 11:44:45 -04:00
Stefano Babic
d714a75fd4 imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB
CONFIG_SECURE_BOOT is too generic and forbids to use it for cross
architecture purposes. If Secure Boot is required for imx, this means to
enable and use the HAB processor in the soc.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-08 16:36:37 +02:00
Fabio Estevam
904c31fe9f imx: mxs: Fix location for the elftosb tool
The Denx FTP location is no longer reachable.

Switch to the Timesys repository instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:36:36 +02:00
Peng Fan
b5661caf84 doc: imx: mkimage: introduce i.MX8 image format
Introduce i.MX8 container set configuration file and add example

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:59 +02:00
T Karthik Reddy
ad704bbdba doc: README.xilinx: Add dt bindings
Devicetree bindings are already specified in Linux kernel documentation.
Instead of maintaining same dt bindings in U-Boot doc specify path to dt
bindings in Linux kernel & documenting specific changes that are in U-Boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 09:41:27 +02:00
Simon Glass
bdaa976153 pci: Correct 'specifified' and 'Plese' typos
Fix these spelling errors the header file and documentation.

Fix a small typo in the PCI documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:42 +08:00
Simon Glass
9b69ba4a78 pci: sandbox: Move the emulators into their own node
Sandbox pci works using emulation drivers which are currently children of
the pci device:

	pci-controller {
		pci@1f,0 {
			compatible = "pci-generic";
			reg = <0xf800 0 0 0 0>;
			emul@1f,0 {
				compatible = "sandbox,swap-case";
			};
		};
	};

In this case the emulation device is attached to pci device on address
f800 (device 1f, function 0) and provides the swap-case functionality.

However this is not ideal, since every device on a PCI bus has a child
device. This is only really the case for sandbox, but we want to avoid
special-case code for sandbox.

Worse, child devices cannot be probed before their parents. This forces
us to use 'find' rather than 'get' to obtain the emulator device. In fact
the emulator devices are never probed. There is code in
sandbox_pci_emul_post_probe() which tries to track when emulators are
active, but at present this does not work.

A better approach seems to be to add a separate node elsewhere in the
device tree, an 'emulation parent'. This could be given a bogus address
(such as -1) to hide the emulators away from the 'pci' command, but it
seems better to keep it at the root node to avoid such hacks.

Then we can use a phandle to point from the device to the correct
emulator, and only on sandbox. The code to find an emulator does not
interfere with normal pci operation.

Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator
given a bus, and finding a bus given an emulator. Update the existing
device trees and the code for finding an emulator.

This brings PCI emulators more into line with I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 3 typos in the commit message;
        encode bus number in the labels of swap_case_emul nodes;
        mention commit 4345998ae9 in sandbox_pci_get_emul()]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
189882c933 sandbox: Add a -T flag to use the test device tree
U-Boot already supports using -D to indicate that it should use the normal
device tree. It is sometimes useful to run with the test device tree, e.g.
when running a test. Add a -T option for this along with some
documentation.

It can be used like this:

   /tmp/b/sandbox/u-boot -T -c "ut dm pci_busdev"

(this will use /tmp/b/sandbox/arch/sandbox/dts/test.dtb as the DT)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
fdd72be486 dm: core: Add documentation on how to debug driver model
Sometimes devices don't appear and it can be confusing. Add a few notes to
help with this situation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 2 issues in the doc and include the doc in the index.rst]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:37 +08:00
Ley Foon Tan
12e800cdab MAINTAINERS, git-mailrc: Update the maintainer for socfpga
This updates MAINTAINERS and git-mailrc to add me as maintainer for
socfpga.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
2019-10-04 12:21:23 -04:00
Heinrich Schuchardt
282ed24fb3 dm: MIGRATION: Add migration plan for CONFIG_DM
For many sub-systems we already require the driver model to be used. Yet
there is still a handful of boards that do not have CONFIG_DM enabled.

We should make CONFIG_DM compulsory with release v2020.01

Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19 12:54:30 -04:00
Tom Rini
4a7cf0fd2b scrapyard: Delete this file and script
The README.scrapyard file has been inconsistently updated.  While well
intentioned, bad data is worse than no data, and in this case a pointer
to use the history that git provides.  Remove the current content and
the script that would update it from time to time as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-19 12:54:29 -04:00
Lukasz Majewski
5f8f46ee6a doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examples
The of-plat.rst file till this change has been using

This is at best misleading as SPL_OF_PLATDATA is always defined when we
want to use this SPL tinification feature (also in U-Boot proper).
As a result the OF_PLATDATA SPL specific code is also compiled in when
U-Boot proper is build.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19 12:54:28 -04:00
Jagan Teki
ce704ea11f doc: driver-model: Update SPI migration status
Update SPI drivers, driver model conversion status for
v2019.10 release.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Priyanka Jain
87d5b22558 MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainers
Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-13 10:14:45 -04:00
Matwey V. Kornilov
78af73efa0 doc: rockchip: use idbloader.img for rk3288, rk3328, rk3399
Makefile now produces ready-to-deploy idbloader.img file.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Park, Aiden
5a8558053d doc: slimbootloader: Update Linux booting steps on QEMU
Add steps to test Linux booting on QEMU with Yocto image.

Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 14:25:40 +08:00
Tom Rini
ba83753289 - fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
 - increase kernel image size from 8 MB to 64 MB on arm64
 - add support for RPi4
 - add prefixes for raspberry pi related stuff to git-mailrc
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl1yhwYSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJELQ5Ylss8dNDNE8QAIzrHZ0RYg6eMCBFzAOyFu+daxUqB1vh
 GR3Kq2ku5+cwmWDRhZjj5Y8ualFqm5/IVvIbYLpV8r5ltnHJOsLCUiNVFsyod3uY
 Np3TtTH6B1QkZAJhz+kqHUHlrNlys/+7vEv1gHdSjZ+fM3OTB+NOzA6cjPMPl1lD
 fGQBEeoddMVjA7UDyoEORrwlQTy7PK82FK5xge4S8nmTrCwGkqkapg24haQwabSd
 QvNjXte1r3g/fsQZ+tFRIZEqOrBpdqXt1sEjrDe8ICjUeRIaOs/3lJxgjk2H1ia6
 x9O7u3OJNgmjs7Y5idi5pXBNiEMKFJCInAecPg6vKkaw/CAQgoQN+8MP5jjE4Cvr
 5oN6vkbScSZ8TeSYgb9NoGZ2/YxqJv67U2+4xSLn9eWPflwy3iVIOaM8R1cOEiHy
 On9tE1JMkIEQ6DClyXlERovTnAUkfFh9Wac8UbTxqHEhcBtGzRkPSYkCRXBR6mL1
 GNh3XZEFLDAczm/nzwQSgbGqKo02siKlOJbKh5PMRA/SZXVKY0BlkpI8hmj+2ra0
 V33YjmwxS+NJdRIQJoVQVgJ8eIFdioJ6+6G3oV7btGlgbA1sJajHtm3ZZ5+080+I
 fbiy1ibUjnrWcVmPWEtY3pr6ZzcL52N8Nzj7c02yej2PS/VL2ewYj7vjmUhFOVYv
 uHKtATRqUYCz
 =hWTf
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-boot

- fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
- increase kernel image size from 8 MB to 64 MB on arm64
- add support for RPi4
- add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06 19:49:51 -04:00
Andrei Gherzan
e0351b242a git-mailrc: Add rpi and bcm283x maintainer
Add entries for bcm283x and rpi prefix.

Signed-off-by: Andrei Gherzan <andrei@balena.io>
[mb: add commit message]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06 18:16:59 +02:00
Heinrich Schuchardt
fe1a81c1a4 doc: UEFI API documentation
Add some more files to the UEFI API documentation.

Correct some Sphinx comments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05 23:18:52 +02:00
Heinrich Schuchardt
2e0f324178 network: set timeline for CONFIG_DM_ETH conversion
The driver model has been supported for network drivers since 2015. It is
time to convert the remaining boards. Set July 2020 as a timeline.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Alex Marginean
8bd37ce3cd drivers: net: add marvell MDIO driver
This patch adds a separate driver for the MDIO interface of the
Marvell Ethernet controllers based on driver model. There are two
reasons to have a separate driver rather than including it inside
the MAC driver itself:
  *) The MDIO interface is shared by all Ethernet ports, so a driver
     must guarantee non-concurrent accesses to this MDIO interface. The
     most logical way is to have a separate driver that handles this
     single MDIO interface, used by all Ethernet ports.
  *) The MDIO interface is the same between the existing mv643xx_eth
     driver and the new mvneta/mvpp2 driver. Even though it is for now
     only used by the mvneta/mvpp2 driver, it will in the future be
     used by the mv643xx_eth driver as well.

This driver supports SMI IEEE for 802.3 Clause 22 and XSMI for IEEE
802.3 Clause 45.

This patch also adds device tree binding for marvell MDIO driver.

Signed-off-by: Ken Ma <make@marvell.com>
Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Alex Marginean
01c9f047ac doc: bindings: add mdio.txt describing generic MDIO properties
Adds a binding document for mdio.  A notable deviation from corresponding
Linux binding is the introduction of device-name optional property, which
can be used to name MDIO buses.  Two reset optional properties described
by Linux binding are also not present as they don't seem to be used in
U-Boot at this time.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-04 11:37:19 -05:00
Ramon Fried
dc625d04d2 doc: pcap: add pcap cmd documentation
Add documentation for new "pcap" command.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Patrick Delaunay
17ac2150c3 dt-bindings: clock: stm32mp1: support disabled fixed clock
Add precision for disabled fixed clock in stm32mp1 binding.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Tom Rini
7a4b0bc5fe Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Support SPL and OpenSBI (FW_DYNAMIC firmware) boot.
- Fix qemu kconfig build warning.
2019-08-26 09:50:46 -04:00
Lukas Auer
8313fcdb4f doc: update QEMU RISC-V documentation
The available defconfigs for RISC-V QEMU have changed. We now have
configurations to compile U-Boot to run in supervisor mode and for
U-Boot SPL. Update the QEMU RISC-V documentation to reflect these
changes.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-26 16:07:42 +08:00
Hannes Schmelzer
015287919f moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 1
Some boards have coded this offset with formula or bitshifts in their
board-config. Manually convert these things into hex-values to be able
using moveconfig.py afterwards.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-25 20:58:58 -04:00
Kever Yang
cb8c492f20 rockchip: rk3288: remove fennec board support
Since there is no one using this board, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Heinrich Schuchardt
0c4a0e601b doc: arch: correct links in x86.rst
Correctly reference uefi/uefi.rst and uefi/u-boot_on_efi.rst.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18 21:54:10 +08:00
Heinrich Schuchardt
79bf4450a1 doc: formatting slimbootloader.rst
Avoid a warning when building the 'make htmldocs' target:

doc/board/intel/slimbootloader.rst:90: WARNING: Title underline too short.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18 21:54:10 +08:00
Anup Patel
88af42d3de doc: sifive-fu540: Update README to explicitly load DTB for Linux
We should explicitly load DTB from TFTP server or MMC/SD card
for Linux booting. This will allow us:
1. To use different Linux DTB for SiFive Unleashed board with
   expansion board connected.
2. Avoid re-flashing OpenSBI firmware whenever board connections
   change.

This patch updates reference bootlog in SiFive FU540 README
as-per above.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-15 13:42:28 +08:00
Simon Glass
9e5616dea9 Drop PCMCIA
This is no-longer used in U-Boot and has not been converted to driver
model. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 19:27:41 -04:00
Tom Rini
31d136926b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DaVinci USB updates
- Various OHCI fixes
- Gadget fixes
2019-08-10 12:21:27 -04:00
Tom Rini
9fd8b2c8c7 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Enable SD slot on Intel Edison
- Populate CSRT ACPI table for shared DMA controller on Intel Tangier
- Convert Intel ICH-SPI driver to use new spi-mem ops
- Enable config_distro_bootcmd for QEMU x86
- Support U-Boot as a payload for Intel Slim Bootloader
- Avoid writing temporary asl files into the source tree which fixes the
  parallel build issue occasionally seen
2019-08-09 23:27:15 -04:00
Simon Glass
b4bf71456d sound: Add codec enable to the sound bindings
For U-Boot we allow a GPIO to be specified to enable the codec. Add this
to the relevant binding files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09 10:01:34 -07:00
Simon Glass
9944d753cb sound: tegra: Add the binding file for tegra-audio
This file was missed when adding the sound driver to U-Boot. Bring it in
from Linux 5.0.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09 10:01:34 -07:00
Simon Glass
e070311ce8 sound: snow: Add the binding file for snow
This file was missed when adding the sound driver to U-Boot. Bring it in
from Linux 5.0.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09 10:01:33 -07:00
Park, Aiden
d8f6db4768 board: intel: Add new slimbootloader board
Add slimbootloader board to run U-boot as a Slim Bootloader payload
- Add new board/intel/slimbootloader directory with minimum codes
- Add slimbootloader configuration files
- Add doc/board/intel/slimbootloader.rst

Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: add slimbootloader board MAINTAINERS file]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09 22:24:02 +08:00
Joshua Watt
00f237e226 qemu-x86: Use config_distro_bootcmd
Converts qemu x86 machines to boot using distro_config. The intent is to
allow u-boot in qemu to be maximally compatible with many boot methods
without having to change the config. Previously, u-boot would only boot
in a very limited set of circumstances where there was a /boot/vmlinuz
on scsi 0:3 with no ramdisk.

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: convert doc updates to reST]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09 22:24:02 +08:00
Tom Rini
21bc1935b1 Merge tag 'u-boot-rockchip-20190809' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add rk3399 boards Khadas Edge/-V/-Captain
- Add fully souce code support for rk3328 including TPL/DRAM init
- Enable boot from eMMC for rk3399 rock960/ficus boards
- turn on the IO supply for dw_mmc
2019-08-09 07:29:20 -04:00
Sam Protsenko
29a81142be fastboot: Remove "bootloader-version" variable
As per [1], there is no such fastboot variable as "bootloader-version".
Only "version-bootloader" is supported. Let's reflect this and not
confuse users further.

[1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md

Fixes: 3aab70afc5 ("usb/gadget: add the fastboot gadget")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-08-08 11:35:02 +02:00