Commit graph

58 commits

Author SHA1 Message Date
Tony O'Brien
09bfd962bd mpc85xx: pcie: Implement workaround for Erratum A007815
The read-only-write-enable bit is set by default and must be cleared
to prevent overwriting read-only registers.  This should be done
immediately after resetting the PCI Express controller.

Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
[York S: Move SYS_FSL_ERRATUM_A007815 to Kconfig]
Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-24 13:28:31 -08:00
Minghuan Lian
1d0b59a9b0 fsl/pci: Set CFG_READY for PCIe v3.0 and later
Freescale PCIe controllers v3.0 and later need to set bit
CFG_READY to allow all inbound configuration transactions
to be processed normally when in EP mode. However, bit
CFG_READY has been moved from PCIe configuration space to
CCSR PCIe configuration register comparing previous version.
The patch is to set this bit according to PCIe version.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:24:23 -07:00
Zhao Qiang
5066e62847 T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue
T2080QDS PEX1/Slot#1 will down-train from x4 to x2,
with SRDS_PRTCL_S1 = 0x66 and SRDS_PRTCL_S2 = 0x15.
Soft reset PCIe can fix this issue.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:24:16 -07:00
Zang Roy-R61911
32514d259b fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint
Even u-boot boots up, the pcie link may not setup correctly when
Freescale SOC acts as endpoint.
So change the link status from 'no link' to 'undetermined' to
reduce the confusion.
The link status can check from host side eventually.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:54 -07:00
Chunhe Lan
f1a96ec1a9 fsl/pci: Add workaround for erratum A-005434
By default, all PEX inbound windows PEX_PEXIWARn[TRGT] are
mapped to 0xF, which is local memory. But for BSC9132, 0xF
is CCSR, 0x0 is local memory.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-05-16 16:24:26 -05:00
Prabhakar Kushwaha
aceea941b6 driver/fsl_pci:Update print to display PCIe generation
Current print only display width of PCIe device. Add print to display
PCIe generation supported by the device.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-02-03 08:38:48 -08:00
Zhao Qiang
287df01e6a PCIe:change the method to get the address of a requested capability in configuration space.
Previously, the address of a requested capability is define like that
	"#define PCI_DCR	0x78"
But, the addresses of capabilities is different with regard to PCIe revs.
So this method is not flexible.

Now a function to get the address of a requested capability is added and used.
It can get the address dynamically by capability ID.
The step of this function:
	1. Read Status register in PCIe configuration space to confirm that
	   Capabilities List is valid.
	2. Find the address of Capabilities Pointer Register.
	3. Find the address of requested capability from the first capability.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
2013-10-16 16:15:17 -07:00
Zang Roy-R61911
7b4e58440f powerpc/pcie: add PCIe version 3.x support
T4240 PCIe IP is version 3.0 and has some update comparing previous
QorIQ products.

1.  Move Freescale specific register define
to
arch/powerpc/include/asm/fsl_pci.h
and update the register offset define for T4240.

2. add the status/control register define
use status/control register to judge the link status

3. The original code uses 'Programming Interface' field to judge if PCIE is
EP or RC mode, however, T4240 does not support this functionality.
According to PCIE specification, 'Header Type' offset 0x0e is used to
indicate header type, so for PCIE controller, the patch changes code to
use 'Header Type' field to identify if the PCIE is RC or EP mode.

This patch fixes  the PCIe card link up issue on T4240QDS.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:41 -07:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Liu Gang
c8b281524b powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Currently, the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" can enable
the master module of Boot from SRIO and PCIE on a platform. But this
is not a silicon feature, it's just a specific booting mode based on
the SRIO and PCIE interfaces. So it's inappropriate to put the macro
into the file arch/powerpc/include/asm/config_mpc85xx.h.

Change the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" to
"CONFIG_SRIO_PCIE_BOOT_MASTER", remove them from
arch/powerpc/include/asm/config_mpc85xx.h file, and add those macros
in configuration header file of each board which can support the
master module of Boot from SRIO and PCIE.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:48 -05:00
Yuanquan Chen
c0a4e6b889 powerpc/p4080ds: fix PCI-e x8 link training down failure
Due to SerDes configuration error, if we set the PCI-e controller link width
as x8 in RCW and add a narrower width(such as x4, x2 or x1) PCI-e device to
PCI-e slot, it fails to train down to the PCI-e device's link width. According
to p4080ds errata PCIe-A003, we reset the PCI-e controller link width to x4 in
u-boot. Then it can train down to x2 or x1 width to make the PCI-e link between
RC and EP.

Signed-off-by: Yuanquan Chen <B41889@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-27 18:28:07 -06:00
Liu Gang
19e4a00965 powerpc/boot: Change the compile macro for SRIO & PCIE boot master module
Currently, the SRIO and PCIE boot master module will be compiled into the
u-boot image if the macro "CONFIG_FSL_CORENET" has been defined. And this
macro has been included by all the corenet architecture platform boards.
But in fact, it's uncertain whether all corenet platform boards support
this feature.

So it may be better to get rid of the macro "CONFIG_FSL_CORENET", and add
a special macro for every board which can support the feature. This
special macro will be defined in the header file
"arch/powerpc/include/asm/config_mpc85xx.h". It will decide if the SRIO
and PCIE boot master module should be compiled into the board u-boot image.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 15:52:46 -05:00
York Sun
9e75875849 powerpc/mpc85xx: Add T4240 SoC
Add support for Freescale T4240 SoC. Feature of T4240 are
(incomplete list):

12 dual-threaded e6500 cores built on Power Architecture® technology
  Arranged as clusters of four cores sharing a 2 MB L2 cache.
  Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture
    v2.06-compliant)
  Three levels of instruction: user, supervisor, and hypervisor
1.5 MB CoreNet Platform Cache (CPC)
Hierarchical interconnect fabric
  CoreNet fabric supporting coherent and non-coherent transactions with
    prioritization and bandwidth allocation amongst CoreNet end-points
  1.6 Tbps coherent read bandwidth
  Queue Manager (QMan) fabric supporting packet-level queue management and
    quality of service scheduling
Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
    support
  Memory prefetch engine (PMan)
Data Path Acceleration Architecture (DPAA) incorporating acceleration for
    the following functions:
  Packet parsing, classification, and distribution (Frame Manager 1.1)
  Queue management for scheduling, packet sequencing, and congestion
    management (Queue Manager 1.1)
  Hardware buffer management for buffer allocation and de-allocation
    (BMan 1.1)
  Cryptography acceleration (SEC 5.0) at up to 40 Gbps
  RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps
  Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps
  DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0)
32 SerDes lanes at up to 10.3125 GHz
Ethernet interfaces
  Up to four 10 Gbps Ethernet MACs
  Up to sixteen 1 Gbps Ethernet MACs
  Maximum configuration of 4 x 10 GE + 8 x 1 GE
High-speed peripheral interfaces
  Four PCI Express 2.0/3.0 controllers
  Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with
    Type 11 messaging and Type 9 data streaming support
  Interlaken look-aside interface for serial TCAM connection
Additional peripheral interfaces
  Two serial ATA (SATA 2.0) controllers
  Two high-speed USB 2.0 controllers with integrated PHY
  Enhanced secure digital host controller (SD/MMC/eMMC)
  Enhanced serial peripheral interface (eSPI)
  Four I2C controllers
  Four 2-pin or two 4-pin UARTs
  Integrated Flash controller supporting NAND and NOR flash
Two eight-channel DMA engines
Support for hardware virtualization and partitioning enforcement
QorIQ Platform's Trust Architecture 1.1

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 14:31:23 -05:00
York Sun
a1e4318cff driver/pci: Fix compiling error
Fix compiling error in case CONFIG_SYS_PCIE2_MEM_VIRT or CONFIG_SYS_PCIE3_MEM_VIRT
not defined.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 14:31:14 -05:00
Minghuan Lian
505f3e6f2e fsl_pci: use 'Header Type' field to judge PCIE mode
The original code uses 'Programming Interface' field to judge if PCIE is
EP or RC mode, however, T4240 does not support this functionality.
According to PCIE specification, 'Header Type' offset 0x0e is used to
indicate header type, so for PCIE controller, the patch changes code to
use 'Header Type' field to identify if the PCIE is EP or RC mode.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 03:03:16 -05:00
Liu Gang
b5f7c8732a powerpc/corenet_ds: Master module for boot from PCIE
For the powerpc processors with PCIE interface, boot location can be
configured from one PCIE interface by RCW. The processor booting from PCIE
can do without flash for u-boot image. The image can be fetched from another
processor's memory space by PCIE link connected between them.

The processor booting from PCIE is slave, the processor booting from normal
flash memory space is master, and it can help slave to boot from master's
memory space.

When boot from PCIE, slave's core should be in holdoff after powered on for
some specific requirements. Master will release the slave's core at the
right time by PCIE interface.

Environment and requirement:

master:
    1. NOR flash for its own u-boot image, ucode and ENV space.
    2. Slave's u-boot image is in master NOR flash.
    3. Normally boot from local NOR flash.
    4. Configure PCIE system if needed.
slave:
    1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV.
    2. Boot location should be set to one PCIE interface by RCW.
    3. RCW should configure the SerDes, PCIE interfaces correctly.
	4. Must set all the cores in holdoff by RCW.
	5. Must be powered on before master's boot.

For the master module, need to finish these processes:
    1. Initialize the PCIE port and address space.
    2. Set inbound PCIE windows covered slave's u-boot image stored in
       master's NOR flash.
	3. Set outbound windows in order to configure slave's registers
	   for the core's releasing.
    4. Should set the environment variable "bootmaster" to "PCIE1", "PCIE2"
	   or "PCIE3" using the following command:

			setenv bootmaster PCIE1
			saveenv

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 10:24:15 -05:00
Linus Walleij
a3a707257f pci: declare pciauto functions in header
The FSL PCI driver uses local prototypes for
pciauto_[pre|post]scan_setup_bridge(), this does not seem right,
so move them to the <pci.h> file.

Fixed a small extern declaration too, this is harmless but distracts
the view since all other prototypes are explicitly external.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-30 22:46:00 +02:00
Linus Walleij
a1e47b66d9 pci: move pciauto_config_init() to pci.h
Fixing build regressions for the Integrator I get find that a few
boards try to work around the missing declaration of
pciauto_config_init() by declaring it in the local scope. This
does not make sense when the sibling functions are in <pci.h>
so move the function to the header, ridding the build error
in the Integrator and getting rid of the local declarations
here and there.

Reported-by:  Wolfgang Denk <wd@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-04 21:13:33 +01:00
Marek Vasut
d015df8fb1 GCC4.6: Squash warnings in fsl_pci_init.c
fsl_pci_init.c: In function 'fsl_pci_init':
fsl_pci_init.c:308: warning: format '%08x' expects type 'unsigned int', but
argument 6 has type 'long unsigned int'
fsl_pci_init.c:347: warning: format '%x' expects type 'unsigned int', but
argument 2 has type 'volatile u32 *'

fsl_pci_init.c: In function 'fsl_pci_init':
fsl_pci_init.c:308: warning: format '%016llx' expects type 'long long unsigned
int', but argument 4 has type 'pci_addr_t'
fsl_pci_init.c:308: warning: format '%016llx' expects type 'long long unsigned
int', but argument 5 has type 'pci_size_t'
fsl_pci_init.c:308: warning: format '%08x' expects type 'unsigned int', but
argument 6 has type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:05 +02:00
Mike Williams
1626308797 cleanup: Fix typos and misspellings in various files.
Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/address

Signed-off-by: Mike Williams <mike@mikebwilliams.com>
2011-07-28 21:27:36 +02:00
Prabhakar Kushwaha
b6ccd2c9de fsl_pci: Add support for FSL PCIe controllers v2.x
FSL PCIe controller v2.1:
	- New MSI inbound window
	- Same Inbound windows address as PCIe controller v1.x

Added new pit_t member(pmit) to struct ccsr_pci for MSI inbound window

FSL PCIe controller v2.2 and v2.3:
	- Different addresses for PCIe inbound window 3,2,1
	- Exposed PCIe inbound window 0
	- New PCIe interrupt status register

Added new Interrupt Status register to struct ccsr_pci & updated pit_t array
size to reflect the 4 inbound windows.

To maintain backward compatiblilty, on V2.2 or greater controllers we
start with inbound window 1 and leave inbound 0 with its default value
(which maps to CCSRBAR).

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-04 09:24:41 -05:00
Prabhakar Kushwaha
b03a466d6c powerpc/85xx: Handle PCIe initialization requires for P1021 class SoCs
The P1011, P1012, P1015, P1016, P1020, P1021, P1024, & P1025 SoCs require
that we initialize the SERDES registers if the lanes are configured for
PCIe.  Additionally these devices PCIe controller do not support ASPM
and we have to explicitly disable it.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-29 07:41:37 -05:00
Wolfgang Denk
d1a24f0618 Minor Coding Style Cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-02 22:36:10 +01:00
Peter Tyser
213ac73e2c fsl_pci: Update PCIe boot ouput
This change does the following:
- Adds printing of negotiated link width.  This information can be
  useful when debugging PCIe issues.
- Makes it optional for boards to implement board_serdes_name().
  Previously boards that did not implement it would print unsightly
  output such as "PCIE1: Connected to <NULL>..."
- Rewords the PCIe boot output to reduce line length and to make it
  clear that the "base address XYZ" value refers to the base address of
  the internal processor PCIe registers and not a standard PCI BAR
  value.
- Changes "PCIE" output to the standard "PCIe"

Before change:
PCIE1: connected to <NULL> as Root Complex (base addr ef008000)
  01:00.0     - 10b5:8518 - Bridge device
   02:01.0    - 10b5:8518 - Bridge device
   02:02.0    - 10b5:8518 - Bridge device
   02:03.0    - 10b5:8518 - Bridge device
PCIE1: Bus 00 - 05
PCIE2: connected to <NULL> as Endpoint (base addr ef009000)
PCIE2: Bus 06 - 06

After change:
PCIe1: Root Complex of PEX8518 Switch, x4, regs @ 0xef008000
  01:00.0     - 10b5:8518 - Bridge device
   02:01.0    - 10b5:8518 - Bridge device
   02:02.0    - 10b5:8518 - Bridge device
   02:03.0    - 10b5:8518 - Bridge device
PCIe1: Bus 00 - 05
PCIe2: Endpoint of VPX Fabric A, x2, regs @ 0xef009000
PCIe2: Bus 06 - 06

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:21 -06:00
Kumar Gala
a4aafcc990 powerpc/fsl-pci: Add generic code to setup PCIe controllers
Since all the PCIe controllers are connected over SERDES on the SoCs we
can utilize is_serdes_configured() to determine if a controller is
enabled.  After which we can setup the ATMUs and LAWs for the controller
in a common fashion and allow board code to specify what the controller
is connected to for reporting reasons.

We also provide a per controller (rather than all) for some systems that
may have special requirements.

Finally, we refactor the code used by the P1022DS to utilize the new
generic code.

Based on patch by: Li Yang <leoli@freescale.com>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:19 -06:00
Kumar Gala
3a0e3c27a5 powerpc/fsl-pci: Determine pci_controller based on cfg addr for dts fixup
Previously we passed in a specifically named struct pci_controller to
determine if we had setup the particular PCI bus.  Now we can search for
the struct so we dont have to depend on the name or the struct being
statically allocated.

Introduced new find_hose_by_cfg_addr() to get back a pci_controller struct
back by searching for it means we can do things like dynamically allocate
them or not have to expose the static structures to all users.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-14 01:32:19 -06:00
Peter Tyser
37d03fce9c fsl_pci_init: Quiet scanning printf()
The "Scanning PCI bus X" message doesn't provide any real useful
information, so remove it.

Original output:
  PCIE1: connected as Root Complex
             Scanning PCI bus 01
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
             Scanning PCI bus 0d
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Updated output:
  PCIE1: connected as Root Complex
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: galak@kernel.crashing.org
2010-11-14 23:46:45 +01:00
Peter Tyser
8ca78f2c89 fsl: Clean up printing of PCI boot info
Previously boards used a variety of indentations, newline styles, and
colon styles for the PCI information that is printed on bootup.  This
patch unifies the style to look like:

...
NAND:  1024 MiB
PCIE1: connected as Root Complex
           Scanning PCI bus 01
        04  01  8086  1010  0200  00
        04  01  8086  1010  0200  00
        03  00  10b5  8112  0604  00
        02  01  10b5  8518  0604  00
        02  02  10b5  8518  0604  00
        08  00  1957  0040  0b20  00
        07  00  10b5  8518  0604  00
        09  00  10b5  8112  0604  00
        07  01  10b5  8518  0604  00
        07  02  10b5  8518  0604  00
        06  00  10b5  8518  0604  00
        02  03  10b5  8518  0604  00
        01  00  10b5  8518  0604  00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
           Scanning PCI bus 0d
        0d  00  1957  0040  0b20  00
PCIE2: Bus 0c - 0d
In:    serial
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: wd@denx.de
CC: sr@denx.de
CC: galak@kernel.crashing.org
2010-11-14 23:46:42 +01:00
Peter Tyser
a72dbae2cc fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware
Previously fsl_pci_init_port() always assumed that a port was a PCIe
port and would incorrectly print messages for a PCI port such as the
following on bootup:
    PCI1:  32 bit, 33 MHz, sync, host, arbiter
                Scanning PCI bus 00
    PCIE1 on bus 00 - 00

This change corrects the output of fsl_pci_init_port():
    PCI1:  32 bit, 33 MHz, sync, host, arbiter
                Scanning PCI bus 00
    PCI1 on bus 00 - 00

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-11-14 23:45:57 +01:00
John Schmoller
96d6160324 pci: Add ability to re-enumerate PCI buses
Add a new 'pci enum' command which re-enumerates the PCI buses.  This
command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful
in boards with FPGAs connected via PCI/PCIe, boards that support PCI
hot-plugging, or during PCI debug.

Also enable the 'pci enum' command for X-ES's Freescale-based boards.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>
2010-10-22 02:17:12 -05:00
Kumar Gala
6525d51fa5 powerpc/85xx & 86xx: Rework ft_fsl_pci_setup to not require aliases
Previously we used an alias the pci node to determine which node to
fixup or delete.  Now we use the new fdt_node_offset_by_compat_reg to
find the node to update.

Additionally, we replace the code in each board with a single macro call
that makes assumes uniform naming and reduces duplication in this area.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-20 04:40:06 -05:00
Kumar Gala
5a85a30969 ppc/8xxx: Delete PCI nodes from device tree if not configured
If the PCI controller wasn't configured or enabled delete from the
device tree (include its alias).

For the case that we didn't even configure u-boot with knowledge of
the controller we can use the fact that the pci_controller pointer
is NULL to delete the node in the device tree.  We determine that
a controller was not setup (because of HW config) based on the fact
that cfg_addr wasn't setup.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-07 00:11:39 -05:00
Kumar Gala
ee53650dad ppc/8xxx: Remove is_fsl_pci_agent
All users of is_fsl_pci_agent have been converted to fsl_is_pci_agent
that uses the standard PCI programming model to determine host vs
agent/end-point.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-05 13:49:07 -06:00
Ed Swarthout
715d8f7608 fsl_pci_init_port end-point initialization is broken
commit 70ed869e broke fsl pcie end-point initialization.
Returning 0 is not correct.  The function must return the first free
bus number for the next controller.

fsl_pci_init() must still be called and a bus allocated even if the
controller is an end-point.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-04 09:16:30 -06:00
Kumar Gala
01471d538f Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"
This reverts commit 70ed869ea5.

There isn't any need to modify the API for fsl_pci_init_port to pass the
status of host/agent(end-point) status.  We can determine that
internally to fsl_pci_init_port.  Revert the patch that makes the API
change.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-04 09:14:59 -06:00
Vivek Mahajan
70ed869ea5 ppc/85xx/pci: fsl_pci_init: pcie agent mode support
Originally written by Jason Jin and Mingkai Hu for mpc8536.

When QorIQ based board is configured as a PCIe agent, then unlock/enable
inbound PCI configuration cycles and init a 4K inbound memory window;
so that a PCIe host can access the PCIe agents SDRAM at address 0x0

* Supported in fsl_pci_init_port() after adding pcie_ep as a param
* Revamped copyright in drivers/pci/fsl_pci_init.c
* Mods in 85xx based board specific pci init after this change

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-27 09:33:51 -05:00
Kumar Gala
93a83872c7 ppc/85xx: Clean up p1_p2_rdb PCI setup
General code cleanup to use in/out IO accessors as well as making
the code that prints out info sane between board and generic fsl pci
code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:04:58 -05:00
Poonam Aggrwal
0d3d68b25a driver/fsl_pci: Add fsl_pci_init_port function to initialize a PCI controller
fsl_pci_init_port can be called from board specific PCI initialization
routines to setup the PCI (or PCIe) controller.  This will reduce code
redundancy in most of the 85xx/86xx FSL board ports that setup PCI.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:43 -05:00
Kumar Gala
ad19e7a5d2 pci/fsl_pci_init: Rework PCI ATMU setup to handle >4G of memory
The old PCI ATMU setup code would just mimic the PCI regions into the
ATMU registers.  For simple memory maps in which all memory, MMIO, etc
space fit into 4G this works ok.  However there are issues with we have
>4G of memory as we know can't access all of memory and we need to
ensure that PCICSRBAR (PEXCSRBAR on PCIe) isn't overlapping with
anything since we can't turn it off.

We first setup outbound windows based on what the board code setup
in the pci regions for MMIO and IO access.  Next we place PCICSRBAR
below the MMIO window.  After which we try to setup the inbound windows
to map as much of memory as possible.

On PCIe based controllers we are able to overmap the ATMU setup since
RX & TX links are separate but report the proper amount of inbound
address space to the region tracking to ensure there is no overlap.

On PCI based controllers we use as many inbound windows as available to
map as much of the memory as possible.

Additionally we changed all the CCSR register access to use proper IO
accessor functions.  Also had to add CONFIG_SYS_CCSRBAR_PHYS to some
86xx platforms that didn't have it defined.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:36 -05:00
Kumar Gala
8295b94400 pci/fsl_pci_init: Use PCIe capability to determine if controller is PCIe
Change the code to use the PCIe capabilities register to determine if we
are a PCIe controller or not.  Additionally cleaned up some white space
and formatting in the file.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:36 -05:00
Kumar Gala
cb151aa2cf pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_init
Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows
before it calls fsl_pci_init.  There isn't any reason to just call it
from fsl_pci_init and simplify things a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:35 -05:00
Kumar Gala
fb3143b35e pci/fsl_pci_init: Fold pci_setup_indirect into fsl_pci_init
Every platform that calls fsl_pci_init calls pci_setup_indirect before
it calls fsl_pci_init.  There isn't any reason to just call it from
fsl_pci_init and simplify things a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:35 -05:00
Kumar Gala
c8514622e2 fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
Rename the pci header for FSL HW so we can move some prototypes
in there and stop doing explicit externs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-04 10:21:29 -05:00
Kumar Gala
ff4e66e93c pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
can be confusing when reading the code.

Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
for system memory mapping purposes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-07 23:50:04 +01:00
Peter Tyser
7a89795911 pci/fsl_pci_init: Enable inbound PCI config cycles
Add fsl_pci_config_unlock() function to enable a
PCI/PCIe interface configured in agent/endpoint mode to
respond to inbound PCI configuration cycles.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-19 18:10:45 -06:00
Kumar Gala
4c253fdb2a drivers/fsl_pci_init: Fix compile warning
fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type

The check only makes sense if we are CONFIG_PHYS_64BIT

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-09 21:15:03 +01:00
Becky Bruce
35db1c6d34 drivers/fsl_pci_init: Fix inbound window mapping bug
The current code will cause the creation of a 4GB window
starting at 0 if we have more than 4GB of RAM installed,
which overlaps with PCI_MEM space and causes pci_bus_to_phys()
to return erroneous information. Limit the size to 4GB - 1;
which causes the code to create one 2GB and one 1GB window
instead.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-12-03 22:48:50 -06:00
Becky Bruce
cd42516242 powerpc: fix pci window initialization to work with > 4GB DRAM
The existing code has a few errors that need to be fixed in
order to support large RAM sizes.  Fix those, and add a
comment to make it clearer.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-27 16:27:58 -05:00
Kumar Gala
219542a1a6 pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-27 16:26:07 -05:00
Kumar Gala
a2aab46072 pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
2008-10-24 17:35:08 -05:00