Commit graph

740 commits

Author SHA1 Message Date
Simon Glass
b71bea7129 gpio: Report errors when GPIOs cannot be read
Some controllers do not allow the output value to be read. Detect this and
report the error in that case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-17 21:27:37 -06:00
Simon Glass
740d5d34b1 cpu: Add support for microcode version and CPU ID
Some CPUs use microcode and each core can have a different version of
microcode loaded. Also some CPUs support the concept of an integer ID used
for identification purposes. Add support for these in the CPU uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:22 +08:00
Tom Rini
ba52426975 cmd: scsi: Group the command portion together, guard with !CONFIG_SPL_BUILD
When we switch to including all linker lists in SPL it is important
to not include commands as that may lead to link errors due to other
things we have already discarded.  In this case, the SCSI code needs a lot
of attention so for now just guard the command portions.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-16 15:03:37 -04:00
Alexander Graf
0f4060ebcb efi_loader: Pass proper device path in on boot
EFI payloads can query for the device they were booted from. Because
we have a disconnect between loading binaries and running binaries,
we passed in a dummy device path so far.

Unfortunately that breaks grub2's logic to find its configuration
file from the same device it was booted from.

This patch adds logic to have the "load" command call into our efi
code to set the device path to the one we last loaded a binary from.

With this grub2 properly detects where we got booted from and can
find its configuration file, even when searching by-partition.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15 21:30:14 -04:00
Alexander Graf
dea2174d9d efi_loader: Call fdt preparation functions
We have a nice framework around image fils to prepare a device tree
for OS execution. That one patches in missing device tree nodes and
fixes up the memory range bits.

We need to call that one from the EFI boot path too to get all those
nice fixups. This patch adds the call.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15 21:30:14 -04:00
Alexander Graf
b9939336d0 efi_loader: Add "bootefi" command
In order to execute an EFI application, we need to bridge the gap between
U-Boot's notion of executing images and EFI's notion of doing the same.

The best path forward IMHO here is to stick completely to the way U-Boot
deals with payloads. You manually load them using whatever method to RAM
and then have a simple boot command to execute them. So in our case, you
would do

  # load mmc 0:1 $loadaddr grub.efi
  # bootefi $loadaddr

which then gets you into a grub shell. Fdt information known to U-boot
via the fdt addr command is also passed to the EFI payload.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
[trini: Guard help text with CONFIG_SYS_LONGHELP]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-15 21:29:47 -04:00
Tom Rini
88033d737d Merge git://git.denx.de/u-boot-dm 2016-03-14 19:21:44 -04:00
Simon Glass
73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
Simon Glass
eea1d148f3 Drop CONFIG_CRAMFS_CMDLINE
This option doesn't do anything. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-14 15:34:50 -06:00
Simon Glass
40fd050890 dm: sandbox: Add driver-model block-device support for sandbox
Update the host driver to support driver model for block devices. A future
commit will remove the old code, but for now it is useful to be able to use
it both with and without CONFIG_BLK.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
2a981dc2c6 dm: block: Adjust device calls to go through helpers function
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
bcce53d048 dm: block: Rename device number member dev to devnum
This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
a696d768c1 dm: cbfs: Fix handling of invalid type
The comment for file_cbfs_type() says that it returns 0 for an invalid type.
The code appears to check for -1, except that it uses an unsigned variable
to store the type. This results in a warning on 64-bit machines.

Adjust it to make the meaning clearer. Continue to handle the -1 case since
it may be needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3e8bd46950 dm: part: Rename some partition functions
Rename three partition functions so that they start with part_. This makes
it clear what they relate to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
e35929e4a1 dm: blk: Rename get_device_and_partition()
Rename this function to blk_get_device_part_str(). This is a better name
because it makes it clear that the function returns a block device and
parses a string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
ebac37cfbf dm: blk: Rename get_device() to blk_get_device_by_str()
The current name is too generic. The function returns a block device based
on a provided string. Rename it to aid searching and make its purpose
clearer. Also add a few comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
db1d9e78e6 dm: blk: Rename get_dev() to blk_get_dev()
The current name is too generic. Add a 'blk_' prefix to aid searching and
make its purpose clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3f603cbbb8 dm: Use uclass_first_device_err() where it is useful
Use this new function in places where it simplifies the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 15:34:50 -06:00
Stuart Longland
fd1000b9c1 common: Add support for environment file in EXT4.
This is an enhancement that permits storing the environment file on an
EXT4 partition such as the root filesystem.  It is based on the existing
FAT environment file code.
2016-03-14 14:18:39 -04:00
Simon Glass
5eca977935 trace: Fix compiler warnings in trace
With min() we must use the same type for each parameter. Fix two problems
in trace.c which produce compiler warnings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-26 08:53:10 -07:00
Tom Rini
fec26e7270 Merge branch 'master' of git://git.denx.de/u-boot-usb 2016-02-24 18:44:17 -05:00
Michal Simek
dfe461d6b5 cmd: mem: Show 64bit addresses which are tested
Fix print message to show full 64bit addresses.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-24 18:44:14 -05:00
Karsten Merker
6f6051fac3 booti: Help text rework.
Fix spelling errors in the "booti" help text and bring it more
in line with the bootm/bootz help texts.

Signed-off-by: Karsten Merker <merker@debian.org>
2016-02-24 18:44:12 -05:00
Lukasz Majewski
fc18f8d170 dfu: usb: f_dfu: Set deferred call for dfu_flush() function
This patch fixes situation when one would like to write large file into
medium with the file system (fat, ext4, etc).
This change sets file size limitation to the DFU internal buffer size.

Since u-boot is not supporting interrupts and seek on file systems, it
becomes challenging to store large file appropriately.

To reproduce this error - create large file (around 26 MiB) and sent it
to the target board.

Lets examine the flow of USB transactions:

0. DFU uses EP0 with 64B MPS [Max Packet Size]

1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions

2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent
				   from target board - IN transaction
				   (target->PC)

3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero
					      Length Packet]

Now the interesting part starts:

4. OUT (PC->target) Setup transaction (request to share DFU state)

5. IN (target->PC) - reply the current DFU state
	- In the UDC driver the req->completion (with dfu_flush) is called
	  after successful IN transfer.
	- The dfu_flush() (called from req->completion callback) saves the
	  whole file at once (u-boot doesn't support seek on fs).
	  Such operation takes considerable time. When the file
	  is large - e.g. 26MiB - this time may be more than 5 seconds.

6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush()
 writes data to eMMC memory.
 The dfu-util application has hard coded timeout on USB transaction
 completion set to 5 seconds (it uses libusb calls).

When the file to store is large (e.g. 26 MiB) the time needed to write it
may excess the dfu-util timeout and following error message will be displayed:
"unable to read DFU status" on the HOST PC console.

This change is supposed to leverage DFU's part responsible for storing files
on file systems. Other DFU operations - i.e. raw/partition write to NAND and
eMMC should work as before.

The only functional change is the error reporting. When dfu_flush() fails
the u-boot prompt will exit with error information and dfu-util application
exits afterwards as well.

Test HW:
- Odroid XU3 (Exynos5433) - test with large file
- Trats (Exynos4210) - test for regression - eMMC, raw,

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Heiko Schocher <hs@denx.de>
2016-02-24 19:12:32 +01:00
Michal Simek
18c4e7f71c i2c: spd: Extend SPD memory types
Decode DDR, DDR3 and DDR4 memories.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:12 +01:00
Simon Glass
4c80c53c00 gpio: Correct handling of 'gpio status'
This is broken - we need to look at the first two characters to distinguish
'gpio status' from 'gpio set'.

Fixes: 0ffe6ab5 (gpio: Allow 's' as an abbreviation for 'status')
Reported-by: Soeren Moch <smoch@web.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Soeren Moch <smoch@web.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2016-02-15 20:58:25 +00:00
Stephen Warren
986fe37817 itest: allow map_physmem to return 0 in limited cases
On some systems, RAM starts at address 0. If the user executes itest
against address 0 on such a system, it will call map_physmem(0, ...)
which will return 0 back; mapping only changes the address on sandbox.
This causes itest to believe map_physmem() has failed, and hence fails
the comparison.

Fix itest so that it allows map_physmem() to return 0 /if/ the orignal
address passed to it was also 0.

This fixes "tegra-uboot-flasher flash" on Tegra20.

This has the disadvantage that on sandbox, failed mapping attempts for
address 0 are not detected. Instead, should the code only call
map_physmem() on sandbox? Or, should map_physmem() return its error status
some other way. Or, should the special case only be allowed on systems
where the base of RAM is 0 somehow?

Fixes: 7861204c9a ("itest: make memory access work under sandbox")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-09 15:41:19 -07:00
David Müller (ELSOFT AG)
b7fbdc60ab Remove unused CONFIG_CMD_HWFLOW option and associated dead code.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08 10:22:44 -05:00
Simon Glass
e517db73a6 cmd: Fix control bmp_display()
All paths should share the same return.

Reported-by: Coverity (CID:134903)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06 13:53:09 +01:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Tom Rini
8a36287a01 Merge git://git.denx.de/u-boot-dm 2016-01-29 13:47:38 -05:00
Stephen Warren
e578b92cdb Implement "pci enum" command for CONFIG_DM_PCI
With CONFIG_DM_PCI enabled, PCI buses are not enumerated at boot, as they
are without that config option enabled. No command exists to enumerate the
PCI buses. Hence, unless some board-specific code causes PCI enumeration,
PCI-based Ethernet devices are not detected, and network access is not
available.

This patch implements "pci enum" in the CONFIG_DM_PCI case, thus giving a
mechanism whereby PCI can be enumerated.

do_pci()'s handling of case 'e' is moved into a single location before the
dev variable is assigned, in order to skip calculation of dev. The enum
sub-command doesn't need the dev value, and skipping its calculation
avoids an irrelevant error being printed.

Using a command to initialize PCI like this has a disadvantage relative to
enumerating PCI at boot. In particular, Ethernet devices are not probed
during PCI enumeration, but only when used. This defers setting variables
such as ethact, ethaddr, etc. until the first network-related command is
executed. Hopefully this will not cause further issues. Perhaps in the
long term, we need a "net start/enum" command too?

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-28 21:01:23 -07:00
Christophe Ricard
0e37d4c2c6 tpm: Fix fault in case CONFIG_DM_TPM is set without any TPM
In case CONFIG_DM_TPM was set without any TPM chipset configured a fault
was generated (NULL pointer access).

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
2016-01-28 21:01:22 -07:00
Tom Rini
82d72a1b99 Merge branch 'master' of git://git.denx.de/u-boot-net 2016-01-28 18:42:10 -05:00
Michal Simek
455ad585ee fpga: Fix compilation warnings
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
Michal Simek
062f078c3b microblaze: Do not print eth device when DM_ETH is enabled
Doing the same fix as is done for ARM by:
"Avoid calling print_eths() with driver model"
(sha1: ff97380015)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27 15:55:49 +01:00
Masahiro Yamada
84b8bf6d5d bug.h: move BUILD_BUG_* defines to include/linux/bug.h
BUILD_BUG_* macros have been defined in several headers.  It would
be nice to collect them in include/linux/bug.h like Linux.

This commit is cherry-picking useful macros from include/linux/bug.h
of Linux 4.4.

I did not import BUILD_BUG_ON_MSG() because it would not work if it
is used with include/common.h in U-Boot.  I'd like to postpone it
until the root cause (the "error()" macro in include/common.h causes
the name conflict with "__attribute__((error()))") is fixed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-25 10:39:59 -05:00
Simon Glass
2e192b245e Remove the cmd_ prefix from command files
Now that they are in their own directory, we can remove this prefix.
This makes it easier to find a file since the prefix does not get in the
way.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-25 10:39:43 -05:00
Simon Glass
72a8cf8dcc Move all command code into its own directory
There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-25 10:39:43 -05:00