Commit graph

71 commits

Author SHA1 Message Date
Tim Harvey
899f589bcd imx: ventana: config: add PREBOOT support
This allows the 'preboot' env variable to be executed prior to bootcmd
if defined.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:23:24 +02:00
Tim Harvey
509870958d imx: ventana: config: use explicit addr in loadscript
If we are loading a script to ${loadaddr} then we need to use that address
explicitly when calling the source command in case user has changed loadaddr

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:23:10 +02:00
Tim Harvey
543a4aba7f imx: ventana: config: use fs env var for block dev filesystem type
In order to make the default boot scripts more flexible, use the variable
'fs' to specify the filesystem type to use for block storage devices
(USB/MMC/SATA) when loading files.

Additionally default this to ext4 and enable ext4 filesystem support
(which encompasses ext2 support) instead of just ext2 support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:22:56 +02:00
Tim Harvey
1b7400011e imx: ventana: config: use bootdir env var for directory of fdt files
In order to make the default boot scripts more flexible, use the variable
'bootdir' to specify the filesystem directory to look for fdt files in.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:22:35 +02:00
Tim Harvey
4df0bff3ce imx: ventana: config: add fixfdt script to apply manual fdt fixups
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:22:20 +02:00
Tim Harvey
7698cdfddd imx: ventana: config: add env vars for disk and part
In order to make the default boot scripts more flexible, use the variable
'disk' to specify the disk device number and the variable 'part' to specify
the partition number.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:21:55 +02:00
Tim Harvey
a0eb8c9b91 imx: ventana: remove SPL_EXT_SUPPORT
Remove SPL_EXT_SUPPORT to resolve build issue. It may be useful to bring
it back in the future after comparing its merits to storing the args/kernel
in fixed raw locations.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tim Harvey
3c0fd17f61 imx: ventana: use EEPROM register for falcon boot mode
NAND+MMC env support costs 12KB in the SPL which is fairly expensive just
for the ability to specify whether or not to boot to uboot or directly
to linux. The Ventana boards have plenty of EEPROM storage so we will use
a byte there to signify if we should boot to the bootloader or to the OS.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tim Harvey
3061a5766a imx: ventana: config: remove redundant config
remove redundant define that exists in mx6_common.h

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tom Rini
89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Tom Rini
78d1e1d0a1 configs: Re-sync almost all of cmd/Kconfig
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:40 -04:00
Sam Protsenko
e6c0bc0643 usb: gadget Move: CONFIG_G_DNL_* to Kconfig
And also reformat defconfigs using "make savedefconfig" rule.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:28 +02:00
Sam Protsenko
aaa4a9e313 usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some
config headers. This is also probably fixes am335x_baltos board.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
3457bbaf22 usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
  - add next options to Kconfig selecting USB_GADGET_DUALSPEED:
    - USB_GADGET_ATMEL_USBA
    - USB_GADGET_DWC2_OTG
    - USB_DWC3
    - CI_UDC
  - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED

While at it, make some related fixes:
  - remove DUALSPEED from configs that don't enable gadget support:
    - kwb.h
    - tseries.h
  - add missing USB_GADGET option to next configs:
    - novena_defconfig
    - pcm051_rev*_defconfig
    - xfi3_defconfig

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
a59a77f863 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
The description was borrowed from kernel. Definitions were added to
defconfig files in a way that "make savedefconfig" generates exactly
the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use
2 mA (as minimal allowed by Kconfig).

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
f9d0fd8a56 usb: gadget: Move CONFIG_USB_GADGET to Kconfig
The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.

Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Add zynq_zc702 conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-25 15:29:48 -04:00
Simon Glass
73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
Bin Meng
68d5342017 sf: Move SPI flash drivers to defconfig
There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-25 10:06:05 -05:00
Thomas Chou
e4aa8edb6e common: add CMD_GPIO to Kconfig
Add CMD_GPIO to Kconfig and run tools/moveconfig.py .

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-18 14:50:06 -05:00
Albert ARIBAUD \\(3ADEV\\)
03544c6640 I2C: mxc_i2c: make I2C1 and I2C2 optional
The driver assumed that I2C1 and I2C2 were always enabled,
and if they were not, then an asynchronous abort was (silently)
raised, to be caught much later on in the Linux kernel.

Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4
are.

To make the change binary-invariant, declare I2C1 and I2C2 in
every include/configs/ file which defines CONFIG_SYS_I2C_MXC.

Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and
CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed
(CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE)
config options.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-10-02 10:42:31 +02:00
Adrian Alonso
1368f99346 thermal: imx_thermal: rework driver to be reused
Rework imx_thermal driver to be used across i.MX
processor that support thermal sensor

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13 10:11:53 +02:00
Simon Glass
a77fda1f7d net: Move CONFIG_E1000 options to Kconfig
Move config for the E1000 Ethernet driver to Kconfig and tidy up affected
boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-21 16:40:23 -05:00
Nikita Kiryanov
181bd9dc61 kconfig: add config option for shell prompt
Add option to set shell prompt string from menuconfig and migrate
boards globally.

The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
  entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
  CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
  right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
  CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h
  files. This results in a streamlined default value across platforms, and
  includes the following files: spear-common, sunxi-common, mv-common,
  ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were
  not updated in their respective defconfig files under the assumption that
  since they did not explicitly define a value, they're fine with whatever
  the default is.
- On the other hand, boards that relied on a value defined in some
  <boards>_common.h file such as woodburn_common, rpi-common,
  bur_am335x_common, ls2085a_common, siemens_am33x_common, and
  omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
  assigning a value for CONFIG_SYS_PROMPT.

Cc: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-13 07:19:33 -04:00
Tom Rini
7a1af7a79b Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-08-02 07:40:37 -04:00
Paul Kocialkowski
01acd6abbd usb: USB download gadget and functions config options coherent naming
This introduces a coherent scheme for naming USB download gadget and functions
config options. The download USB gadget config option is moved to
CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each
function's config option is moved to a CONFIG_USB_FUNCTION_ prefix.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
2015-07-22 08:57:53 +02:00
Peter Robinson
3c73b0a49a imx6: standardise OCOTP and fuse config to mx6_common
According to README.mxc_ocotp the OCOTP is a stanard i.MX6 SoC feature
so centralise the config in mx6_common.h so functionality is standard
across all boards

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-07-10 09:34:16 +02:00
Joe Hershberger
c9bb942e2f Move default y configs out of arch/board Kconfig
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:17:55 -04:00
Joe Hershberger
6eed3786c6 net: Move the CMD_NET config to defconfigs
This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01 09:40:15 -05:00
Joe Hershberger
7453cb595c Move setexpr to Kconfig
Another shell scripting command that has not been moved.

Moved using tools/moveconfig.py using these settings:

CMD_SETEXPR bool n y

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-01 09:39:29 -05:00
Peter Robinson
1022b85cb0 mx6: standardise CONFIG_CMD_CACHE
Move CONFIG_CMD_CACHE to mx6_common and standardise the way it's defined.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
2015-05-26 15:58:57 +02:00
Peter Robinson
e51c1e8ece imx6: generic MMC config options to mx6_common
Move all standard mx6 MMC configs to mx6_common.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
2015-05-26 15:58:57 +02:00
Peter Robinson
a380ce6e96 imx6: standardise filesystem and boot options
Move all standard filesystem, partition and fdt options to mx6_common.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-05-26 15:58:56 +02:00
Peter Robinson
2d8a07475e imx6: move generic miscellaneous and overwrite options
Move generic miscellaneous options that are standard across most, if not all,
 mx6 boards to central mx6_common define to ensure consistent features.

 Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-05-26 15:58:56 +02:00
Peter Robinson
8183058188 imx6: centralise common boot options in mx6_common.h
Define common LOADADDR and BOOTDELAY to ensure a consistent experience
across mx6 boards

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-05-26 15:58:56 +02:00
Peter Robinson
ea6909173f imx6: move standard ATAG configs to mx6_common.h
Define the standard ATAG consfigs in mx6_common.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
2015-05-26 15:58:55 +02:00
Peter Robinson
3b1f681131 imx6: move generic imx6 options to mx6_common.h
All boards define CONFIG_MX6, CONFIG_DISPLAY_BOARDINFO, CONFIG_DISPLAY_CPUINFO
and CONFIG_SYS_GENERIC_BOARD so define them in mx6_common

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
2015-05-26 15:58:55 +02:00
Peter Robinson
056845c235 imx6: move all standard includes to mx6_common.h
The linux/sizes.h, asm/arch/imx-regs.h, asm/imx-common/gpio.h,
config_cmd_default.h includes are used fairly universally across imx6 boards
so include them in mx6_common.h by default.

We define CONFIG_SYS_NO_FLASH before config_cmd_default.h  so that we
don't have to undef CONFIG_CMD_FLASH / CONFIG_CMD_IMLS everywhere.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-05-26 15:58:48 +02:00
Tim Harvey
0a9c215050 imx: ventana: update MMC env configuration
We will use the same env size and redundancy used for NAND env for MMC.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 14:21:32 +02:00
Tim Harvey
53940a5079 imx: ventana: config: enable Falcon mode
Falcon mode entails the SPL booting the OS directly instead of U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-21 19:07:17 +02:00
Tim Harvey
e06a03625d imx: ventana: add pmic_setup to SPL
We need to do any PMIC setup in the SPL if we are to bypass U-Boot for
falcon mode.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:04:44 +02:00
Tim Harvey
55ff55e9b4 imx: ventana: (cosmetic) clean up size defines for improved readability
Use the SZ_1M and SZ_1K macros from linuz/sizes.h for improved readability

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:04:31 +02:00
Tim Harvey
e889e23a1d imx: ventana: config: use MMC SPL RAW support
Switch to MMC RAW support for SPL. We will place the uboot.img at 69KB.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:04:10 +02:00
Tim Harvey
50de5088bb imx: ventana: config: enable Thermal support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
d41c8c8ece imx: ventana: enable DM_SERIAL
mxc_serial supports DM so lets use it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
e1b4770ce4 imx: ventana: config: enable driver model
Enable U-Boot Driver Model (DM).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
32a6eaeadf imx: ventana: config: enable gpio command
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:24 +02:00
Tim Harvey
06c3564d5f imx: ventana: display SPL boot device
Display what device the SPL will fetch uboot.img from

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:24 +02:00
Tim Harvey
560e8b3f33 imx: ventana: set dtype env var to boot media
Bootscripts for some distro's such as Android can benefit from knowing
what boot media its script was loaded from.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:24 +02:00
Tom Rini
e536ab8849 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
York Sun
f8cb101e1e driver/i2c/mxc: Enable I2C bus 3 and 4
Some SoCs have more than two I2C busses. Instead of adding ifdef
to the driver, macros are put into board header file where
CONFIG_SYS_I2C_MXC is defined.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Heiko Schocher <hs@denx.de>
2015-04-23 08:55:53 -07:00