Commit graph

20 commits

Author SHA1 Message Date
Patrick Delaunay
abe66b1b5d Convert CONFIG_ENV_SPI_* to Kconfig
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:59 -04:00
Heiko Schocher
9ba5e5bc26 Revert "env: add spi_flash_read_env function"
This reverts commit 9a9d66f5ef.

because it breaks fw_setenv and U-Boot interworking, if
U-Boot environment is stored in a SPI-NOR.

Reproduce it with:
boot linux with empty Environment and store a variable
with fw_setenv into it, the Environment is now filled
with 0xff:

root@ckey5e:10:8e:~# hexdump -C /dev/mtd4
00000000  e9 e8 07 fa 01 62 6f 6f  74 63 6d 64 3d 72 75 6e  |.....bootcmd=run|
[...]
00000f30  7d 00 75 62 69 62 6f 6f  74 76 6f 6c 3d 32 00 00  |}.ubibootvol=2..|
00000f40  00 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|

Boot now U-Boot prints:

Loading Environment from SPI Flash... SF: Detected s25fl128l with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

Reason is the above commit, as it only reads until \0\0
is found, and assumes the rest of the Environment
space is filled with 0x00, which is not the case when
saving an Environment under linux with fw_setenv.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2019-03-13 20:32:09 -04:00
Tom Rini
82eeb71ae9 Revert "env: sf: fix environment in SPI NOR"
Per Heiko the original changes were correct and something is misbehaving
on his hardware.

This reverts commit 3d5931e598.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-21 11:57:58 -05:00
Heiko Schocher
3d5931e598 env: sf: fix environment in SPI NOR
commit 9a9d66f5ef ("env: add spi_flash_read_env function")

breaks Environment functionality, as it reads only
until 2 \0 are found, but fills the buffer with 0x0
instead 0xff which leads in an incorrect crc sum.

Fix: init the read buffer with 0xff instead 0x00

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-01-18 13:40:36 -05:00
Horatiu Vultur
9a9d66f5ef env: add spi_flash_read_env function
The spi_flash_read_env function is a wrapper over spi_flash_read, which
enables the env to read multiple flash page size from flash until '\0\0'
is read or the end of env partition is reached. Instead of reading the
entire env size. When it reads '\0\0', it stops reading further the env
and assumes that the rest of env is '\0'.

This is an optimization for large environments that contain few bytes
environment variables. In this case it doesn't need to read the entire
environment and only few pages.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 16:14:46 -05:00
Rajesh Bhagat
119c01c2a5 env: sf: define API to override sf environment address
Defines env_sf_get_env_addr API to override sf environment address,
required to support multiple environment.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-04 13:07:36 -08:00
Konstantin Porotchkin
25a17652c9 fix: env: Fix the SPI flash device setup for DM mode
For some reason the spi_flash_probe_bus_cs() is called
inside the setup_flash_device() with zero values in place
of configurated SPI flash mode and maximum flash speed.
This code causes HALT error during startup environment
relocation on some platforms - namely Armada-38x-GP board.
Fix the function call by replacing zeros with the appropriate
values - CONFIG_ENV_SPI_MAX_HZ and CONFIG_ENV_SPI_MODE.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19 09:02:34 +02:00
Yaniv Levinsky
c5d548a9f8 env: common: accept flags on reset to default env
The function set_default_env() sets the hashtable flags for import_r().
Formally set_default_env() doesn't accept flags from its callers. In
practice the caller can (un)set the H_INTERACTIVE flag, but it has to be
done using the first character of the function's string argument. Other
flags like H_FORCE can't be set by the caller.

Change the function to accept flags argument. The benefits are:
1. The caller will have to explicitly set the H_INTERACTIVE flag,
   instead of un-setting it using a special char in a string.
2. Add the ability to propagate flags from the caller to himport(),
   especially the H_FORCE flag from do_env_default() in nvedit.c that
   currently gets ignored for "env default -a -f" commands.
3. Flags and messages will not be coupled together. A caller will be
   able to set flags without passing a string and vice versa.

Please note:
The propagation of H_FORCE from do_env_default() does not introduce any
functional changes, because currently himport_r() is set to destroy the
old environment regardless if H_FORCE flag is set or not. More changes
are needed to utilize the propagation of H_FORCE.

Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2018-07-19 16:17:58 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Simon Goldschmidt
80719938c9 env: sf: use env_import_redund to simplify env_sf_load
For the redundant environment configuration, env_sf_load still
contained duplicate code instead of using env_import_redund().

Simplify the code by only executing the load twice and delegating
everything else to env_import_redund.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-02-01 08:05:53 -05:00
Simon Goldschmidt
42a1820bbc env: make env_import(_redund) return 0 on success, not 1
env_import (and env_import_redund) currently return 1 on success
and 0 on error. However, they are only used from functions
returning 0 on success or a negative value on error.

Let's clean this up by making env_import and env_import_redund
return 0 on success and -EIO on error (as was the case for all
users before).

Users that cared for the return value are also updated. Funny
enough, this only affects onenand.c and sf.c

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-31 18:45:10 -05:00
Ashish Kumar
b500c92b70 env: sf: Add support for env init for QSPI-NOR
ENV variables can now be used before relocation.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Masahiro Yamada
9b643e312d treewide: replace with error() with pr_err()
U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

  # define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux.  (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
 (...)
// </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 11:59:44 -04:00
Simon Glass
c595199194 env: Adjust the load() method to return an error
The load() methods have inconsistent behaviour on error. Some of them load
an empty default environment. Some load an environment containing an error
message. Others do nothing.

As a step in the right direction, have the method return an error code.
Then the caller could handle this itself in a consistent way.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:31:24 -04:00
Simon Glass
ac358beb85 env: Drop the env_name_spec global
Add a name to the driver and use that instead of the global variable
declared by each driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:28 -04:00
Simon Glass
7938822a6b env: Drop common init() functions
Most of the init() implementations just use the default environment.
Adjust env_init_new() to do this automatically, and drop the redundant
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:27 -04:00
Simon Glass
e5bce247b0 env: Switch over to use environment location drivers
Move over to use a the master implementation of the location drivers, with
each method calling out to the appropriate driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:27 -04:00
Simon Glass
4415f1d1f1 env: Create a location driver for each location
Set up a location driver for each supported environment location. At
present this just points to the global functions and is not used. A
later patch will switch this over to use private functions in each driver.

There are several special cases here in various drivers to handle
peculiarities of certain boards:

1. Some boards define CONFIG_ENV_IS_IN_FAT and CONFIG_SPL_ENV_SUPPORT but
do not actually load the environment in SPL. The env load code was
optimised out before but with the driver, it is not. Therefore a special
case is added to env/fat.c. The correct fix (depending on board testing
might be to disable CONFIG_SPL_ENV_SUPPORT.

2. A similar situations happens with CONFIG_ENV_IS_IN_FLASH. Some boards
do not actually load the environment in SPL, so to reduce code size we
need to drop that code. A similar fix may be possible with these boards,
or it may be possible to adjust the environment CONFIG settings.

Added to the above is that the CONFIG_SPL_ENV_SUPPORT option does not
apply when the environment is in flash.

Obviously the above has been discovered through painful and time-consuming
trial and error. Hopefully board maintainers can take a look and figure
out what is actually needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-15 08:18:53 -04:00
Simon Glass
203e94f6c9 env: Add an enum for environment state
At present we have three states for the environment, numbered 0, 1 and 2.
Add an enum to record this to avoid open-coded values.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 08:18:51 -04:00
Simon Glass
0649cd0d49 Move environment files from common/ to env/
About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 08:18:45 -04:00
Renamed from common/env_sf.c (Browse further)