Commit graph

161 commits

Author SHA1 Message Date
Tom Rini
4d80051b63 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-06-08 08:37:02 -04:00
Tom Rini
d85cd29133 Merge git://git.denx.de/u-boot-dm 2015-06-05 11:21:08 -04:00
Simon Glass
2bb02e4fe2 dm: pci: Allow PCI bus numbering aliases
Commit 9cc36a2 'dm: core: Add a flag to control sequence numbering' changed
the default uclass behaviour to not support bus numbering. This is incorrect
for PCI and that commit should have enabled the flag for PCI.

Enable it so that PCI buses can be found and the 'pci' command works again.
Also add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:34:47 -06:00
Bin Meng
04e3c4eb93 pci: Do not skip legacy IDE device configuration
The legacy IDE device has a BAR4 (Bus Master Interface BAR) which
needs to be configured.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
1b73b1c7fb pci: Allow debug message output in pci_auto.c
Remove the '#undef DEBUG' in pci_auto.c so that we can enable debug
message output via '-DDEBUG'.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
238fe16c40 pci: Move pci_hose_phys_to_bus() to pci_common.c
pci_hose_phys_to_bus() is needed by several drivers. Move it to
pci_common.c to avoid a broken build when CONFIG_DM_PCI is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:38 -06:00
Tim Harvey
378b02d7ed pci: imx: display message if no pcie link
If CONFIG_PCI_SCAN_SHOW enabled then lets print a message of no link was
detected.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-28 12:01:44 +02:00
Tim Harvey
0373a7e91b pci: display header for bus scan
If we are displaying detected PCI devices (CONFIG_PCI_SCAN_SHOW) display
a 'PCI:' header prior to scan.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-27 13:35:54 -04:00
Tom Rini
d81572c272 Merge git://git.denx.de/u-boot-mpc85xx 2015-05-05 14:57:23 -04:00
Minghuan Lian
1d0b59a9b0 fsl/pci: Set CFG_READY for PCIe v3.0 and later
Freescale PCIe controllers v3.0 and later need to set bit
CFG_READY to allow all inbound configuration transactions
to be processed normally when in EP mode. However, bit
CFG_READY has been moved from PCIe configuration space to
CCSR PCIe configuration register comparing previous version.
The patch is to set this bit according to PCIe version.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:24:23 -07:00
Zhao Qiang
5066e62847 T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue
T2080QDS PEX1/Slot#1 will down-train from x4 to x2,
with SRDS_PRTCL_S1 = 0x66 and SRDS_PRTCL_S2 = 0x15.
Soft reset PCIe can fix this issue.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:24:16 -07:00
Bin Meng
81d0b354b0 pci: Remove parameter 'class' of pci_rom_load()
pci_rom_load() does not use its parameter 'class', so remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-29 18:51:49 -06:00
Bin Meng
d57c2f24fc pci: Option rom class is a 24-bit number
We should pass a u32 class number to pci_rom_probe() instead of a u16.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-29 18:51:49 -06:00
Minghuan Lian
0070459048 pci/layerscape: fix link and class issues to support ls2085a
1. LS2085a provides PCIE_LUT_DBG register rather than PCIE_LDBG
   to show the link status, so the patch fixes it.
2. Increase the delay time to make sure that link training
   has finished.
3. Return invalid value when accessing multi-function device
4. For LS2085a DBI_RO_WR_EN bit is cleared as default, so we
   must set this bit before change DBI register value.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-04-21 10:19:19 -07:00
Minghuan Lian
d42bd3453a pci/layerscape: remove unnecessary pcie_layerscape.h
The patch uses the common function name ft_pci_setup to replace
ft_pcie_setup, then removes unnecessary pcie_layerscape.h because
all the functions have been declared in common.h.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-04-21 10:19:19 -07:00
Simon Glass
a219daeafe dm: x86: pci: Add a PCI driver for driver model
Add a simple x86 PCI driver which uses standard functions provided by the
architecture.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
36d0d3b4b4 dm: sandbox: pci: Add a PCI emulation uclass
Since sandbox does not have real devices (unless it borrows those from the
host) it must use emulations. Provide a uclass which permits PCI operations
to be passed through to an emulation device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:43 -06:00
Simon Glass
537849aaa1 dm: sandbox: Add a simple PCI driver
Add a driver which can access emulations of devices and make them available
in sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:43 -06:00
Simon Glass
ff3e077bd2 dm: pci: Add a uclass for PCI
Add a uclass for PCI controllers and a generic one for PCI devices. Adjust
the 'pci' command and the existing PCI support to work with this new uclass.
Keep most of the compatibility code in a separate file so that it can be
removed one day.

TODO: Add more header file comments to the new parts of pci.h

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:43 -06:00
Simon Glass
aab6724c90 dm: pci: Move common PCI functions into their own file
Driver model will share many functions with the existing PCI implementation.
Move these into their own file to avoid duplication and confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Minghuan Lian
e4e8cb7138 driver/pci: add Layerscape PCIe driver
The patch adds Freescale Layerscape PCIe driver and provides
up to 4 controllers support.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-24 13:10:50 -08:00
David Feng
6eefd5279c PCI: add 64-bit prefetchable memory support
PCI specification allow prefetchable memory to be 32-bit or 64-bit.
PCI express specification states that all memmory bars for prefetchable
memory must be implemented as 64-bit. They all require that 64 bit
prefetchble memory are suported especially when u-boot is ported to
more and more 64bit processors.

Signed-off-by: David Feng <fenghua@phytium.com.cn>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-16 15:48:26 -05:00
Simon Glass
bc17d8f4ac x86: video: Allow video ROM execution to fall back to the other method
If the BIOS emulator is not available, allow use of native execution if
available, and vice versa. This can be controlled by the caller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:43 -07:00
Simon Glass
250e039da8 pci: Add a function to find a device by class
There is an existing function prototype in the header file but it is not
implemented. Implement something similar.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:42 -07:00
Minghuan Lian
ef2d17fe21 drivers/pci/pci_rom.c: fix compile warning under 64bit mode
Fix this:
drivers/pci/pci_rom.c:95:15: warning: cast to pointer from
integer of different size [-Wint-to-pointer-cast]
rom_header = (struct pci_rom_header *)rom_address;

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
2015-01-30 09:19:16 -05:00
Sjoerd Simons
053b86e6d8 pci: tegra: Fix port information parsing
commit a62e84d7b1 incorrectly changed the tegra pci code to the
new fdtdec pci helpers. To get the device index of the root port, the
"reg" property should be parsed from the dtb (as was previously the
case).

With this patch i can successfully network boot my jetson tk1

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
2015-01-23 17:25:30 -07:00
Simon Glass
4a2708a097 x86: Access the VGA ROM when needed
Add code to the generic pci_rom file to access the VGA ROM in PCI space
when needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-23 17:24:54 -07:00
Simon Glass
c5caba0366 x86: pci: Don't stop when we get a vendor/device mismatch
These are quite common and we may as well press on and not be so picky.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-23 17:24:16 -07:00
Simon Glass
bdc88d4eb3 x86: Support ROMs on other archs
We shouldn't assume that the VGA ROM can always be loaded at c0000. This
is only true on x86 machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-23 17:24:15 -07:00
Simon Glass
40305240c6 x86: Correct endianness isues in pci_rom
This code is too x86-dependent at present. Correct it so that it can run on
big-endian machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-23 17:24:15 -07:00
Masahiro Yamada
d928664f41 powerpc: 74xx_7xx: remove 74xx_7xx cpu support
All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
2015-01-16 10:24:39 -05:00
Simon Glass
9a99caf3f3 x86: pci: Display vesa modes in hex
The hex value is more commonly understood, so use that instead of decimal.
Add a 0x prefix to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13 07:25:00 -08:00
Simon Glass
fba7eac1c8 x86: video: Add debug option to time the BIOS copy
This can be very slow - typically 80ms even on a fast machine since it uses
the SPI flash to read the data. Add an option to display the time taken.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13 07:24:59 -08:00
Simon Glass
23609c71dc x86: pci: Don't return a vesa mode when there is not video
If the video has not been set up, we should not return a success code. This
can be detected by seeing if any of the variables are non-zero.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:24:58 -08:00
Bin Meng
a62e84d7b1 fdt: Add several apis to decode pci device node
This commit adds several APIs to decode PCI device node according to
the Open Firmware PCI bus bindings, including:
- fdtdec_get_pci_addr() for encoded pci address
- fdtdec_get_pci_vendev() for vendor id and device id
- fdtdec_get_pci_bdf() for pci device bdf triplet
- fdtdec_get_pci_bar32() for pci device register bar

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Include <pci.h> in fdtdec.h and adjust tegra to fix build error)
2015-01-13 07:24:40 -08:00
Bin Meng
8f9052fd98 pci: Make pci apis usable before relocation
Introduce a gd->hose to save the pci hose in the early phase so that
apis in drivers/pci/pci.c can be used before relocation. Architecture
codes need assign a valid gd->hose in the early phase.

Some variables are declared as static so change them to be either
stack variable or global data member so that they can be used before
relocation, except the 'indent' used by CONFIG_PCI_SCAN_SHOW which
just affects some print format.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12 17:03:41 -08:00
Thierry Reding
f315828b0d pci: tegra: Add Tegra PCIe driver
Add support for the PCIe controller found on some generations of Tegra.
Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has 3 root
ports with a total of 6 lanes and Tegra124 has 2 root ports with a total
of 5 lanes.

This is based on the Linux kernel driver, originally submitted upstream
by Mike Rapoport.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-12-18 13:19:20 -07:00
Minghuan Lian
da419027af arm: ls102xa: Update PCIe dts node status
The patch changes PCIe dts node status to 'disabled' if the
corresponding controller is disabled according to serdes protocol.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-11 09:35:56 -08:00
Simon Glass
6854f87cbc pci: Add general support for execution of video ROMs
Some platforms don't have native code for dealing with their video
hardware. In some cases they use a binary blob to set it up and perform
required actions like setting the video mode. This approach is a hangover
from the old PC days where a ROM was provided and executed during startup.

Even now, these ROMs are supplied as a way to set up video. It avoids the
code for every video chip needing to be provided in the boot loader. But
it makes the video much less flexible - e.g. it is not possible to do
anything else while the video init is happening (including waiting hundreds
of milliseconds for display panels to start up).

In any case, to deal with this sad state of affairs, provide an API for
execution of x86 video ROMs, either natively or through emulation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 07:11:14 -07:00
Simon Glass
e8a552eb62 pci: Add functions to read and write a BAR address
Some PCI functions cannot be auto-configured. Add a function to set up a
fixed BAR which can be used in these situations. Also add a function to read
the current address of a BAR.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-25 06:34:00 -07:00
Thierry Reding
4efe52bf23 pci: Honour pci_skip_dev()
When enumerating devices, honour the pci_skip_dev() function. This can
be used by PCI controller drivers to restrict which devices will be
probed.

This is required by the NVIDIA Tegra PCIe controller driver, which will
fail with a data abort exception if an access is attempted to a device
number larger than 0 outside of bus 0. pci_skip_dev() is therefore
implemented to prevent any such accesses.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-23 06:49:01 -05:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Jeroen Hofstee
7b19fd6d9f pci: use __weak
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:01:59 -04:00
Masahiro Yamada
ed36323f6d kconfig: add blank Kconfig files
This would be useful to start moving various config options.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Fabio Estevam
1b8ad74a6f pcie_imx: Add mx6solox support
Let PCI on mx6solox also be supported.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2014-09-09 17:24:49 +02:00
Tim Harvey
0991866cf7 pci: add support for board_pci_fixup_dev function
Some board-level drivers may wish to have per-device fixup functions
for PCI devices.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 16:15:02 +02:00
Tom Rini
5a1095a830 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-08-29 11:06:51 -04:00
Tim Harvey
5a82e1a21d pci: mx6: fix occasional link failures
According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable
for SS function) must remain deasserted until the reference clock is running
at the appropriate frequency.

Without this patch we find a high link failure rate (>5%) on certain
IMX6 boards at various temperatures.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-08-20 12:37:15 +02:00
Stephen Warren
d878c9a932 pci: fix overflow in __pci_hose_bus_to_phys w/ large RAM
If a 32-bit system has 2GB of RAM, and the base address of that RAM is
2GB, then start+size will overflow a 32-bit value (to a value of 0).

To avoid such an overflow, convert __pci_hose_bus_to_phys() to calculate
the offset of a bus address into a PCI region, rather than comparing a
bus address against the end of a PCI region.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-14 11:38:47 +02:00
Zang Roy-R61911
32514d259b fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint
Even u-boot boots up, the pcie link may not setup correctly when
Freescale SOC acts as endpoint.
So change the link status from 'no link' to 'undetermined' to
reduce the confusion.
The link status can check from host side eventually.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:54 -07:00