Commit graph

8332 commits

Author SHA1 Message Date
Haikun Wang
0c42a8de85 armv8/ls2085ardb: Enable DSPI flash support for LS2085ARDB
Enable DSPI flash related configurations for LS2085ARDB.

Signed-off-by: Haikun Wang <haikun.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:39 -07:00
Haikun Wang
b7774b0522 armv8/ls2085aqds: Enable DSPI flash support for LS2085AQDS
Enable DSPI flash related configurations.

Signed-off-by: Haikun Wang <haikun.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:39 -07:00
Wang Dongsheng
340848b185 arm/ls102xa: Add PSCI support for ls102xa
Base on PSCI services, implement CPU_ON/CPU_OFF for ls102xa platform.

Tested on LS1021AQDS, LS1021ATWR.
Test CPU hotplug times: 60K
Test kernel boot times: 1.2K

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Acked-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:38 -07:00
Prabhakar Kushwaha
97421bd2c0 board/ls2085a: Increase kernel_size value in env variable
Linux itb image size has been increased from 30MB.

So updating kernel_size to 40MB in env variable.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:38 -07:00
Prabhakar Kushwaha
9527931507 board/ls2085rdb: Export functions for standalone AQ FW load apps
Export functions required by Aquntia PHY firmware load application.
functions are memset, strcpy, mdelay, mdio_get_current_dev,
phy_find_by_mask, mdio_phydev_for_ethname and miiphy_set_current_dev

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:37 -07:00
Stuart Yoder
39da644ea8 armv8/fsl-lsch3: partition stream IDs
Stream IDs on ls2085a devices are not hardwired and are
programmed by sw.  There are a limited number of stream IDs
available, and the partitioning of them is scenario dependent.
This header defines the partitioning between legacy, PCI,
and DPAA2 devices.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:37 -07:00
J. German Rivera
c1000c12d3 drivers/fsl-mc: Autoload AOIP image from NOR flash
Load AIOP image from NOR flash into DDR so that the MC firmware
the MC fw can start it at boot time

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:36 -07:00
Stuart Yoder
b0ba9d48a4 armv8/ls2085a: enable debug server
Signed-off-by: Stuart Yoder <stuart.yoder at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:36 -07:00
Prabhakar Kushwaha
5c05508971 armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvr
The agreed split of the top of memory is 256M for debug server and 256M
 for MC. This patch implements the split.

 In addition, the MC mem must be 512MB aligned, so the amount of memory
 to hide must be 512MB to achieve that alignment.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:36 -07:00
York Sun
fc7b3855e1 armv8/ls2085ardb: Fix SPD address error on early boards
Board rev C and earlier has duplicated SPD address on 2nd DDR
controller slots. It is fixed on rev D and later. SPD addresses
need to be updated accordingly.

Signed-off-by: York Sun <yorksun at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
2015-07-20 11:44:35 -07:00
Prabhakar Kushwaha
ff1b8e3f55 armv8/ls2085a: Avoid hard-coding for board name print
LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE,
LS2080A, LS2085AE and LS2085A personlities.

Instead of hard-coding, board name should change as per selected
personality.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:35 -07:00
Bhupesh Sharma
34cc75469f armv8/ls2085a: Increase the supported kernel size
Increases the kernel size supported for LS2085A platforms:-
 - Update environment variables
 - Add ramdisk_size in bootargs env variable
 - Define  CONFIG_SYS_BOOTM_LEN to 64MB

Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:34 -07:00
Prabhakar Kushwaha
4012350dea armv8/ls2085rdb: Update PCA9547PW slave address
Primary Mux on I2C1 controller has slave address as 0x75.
So update its address.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:34 -07:00
Prabhakar Kushwaha
252b17e0ec armv8/ls2085a: Update LS2085a PCIe compatible
Compatible field "fsl,20851a-pcie" is not correct.
So update it to "fsl,ls2085a-pcie"

Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:33 -07:00
Priyanka Jain
6581440c1d armv8/ls2085a: Enable "date" command for QDS and RDB
Enable "date" command for QDS and RDB boards

Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:33 -07:00
Yangbo Lu
5a4d744c90 armv8/ls2085ardb: add hwconfig setting for eSDHC
Add hwconfig setting for eSDHC since it shares some pins with other
IP block.

Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:33 -07:00
Prabhakar Kushwaha
3484d95307 armv8/ls2085ardb: Add eth & phy firmware loading support
Add support for board eth initialization and support for loading phy
firmware. PHY firmware needs to be loaded from board_eth_init() because
all the MACs are not initialized by ldpaa_eth driver.

Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:33 -07:00
Tom Rini
605e15db2b Merge git://git.denx.de/u-boot-x86 2015-07-15 10:41:20 -04:00
Simon Glass
b71f9dca89 dm: x86: minnowmax: Move PCI to use driver model
Adjust minnowmax to use driver model for PCI. This requires adding a device
tree node to specify the ranges, removing the board-specific PCI code and
ensuring that the host bridge is configured.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:19 -06:00
Simon Glass
d5359f2e4d dm: spi: Enable environment for minnowmax
Enable a SPI environment and store it in a suitable place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-07-14 18:03:19 -06:00
Bin Meng
7aaff9bf81 x86: crownbay: Enable graphics support
Enable graphics support on Intel Crown Bay board With the help of
vgabios for Intel TunnelCreek IGD. Tested with an external LVDS
panel connected to X4 connector and SDVO adapter connected to X9
connector on the board.

Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:19 -06:00
Bin Meng
786a08e0dd x86: Move VGA option rom macros to Kconfig
Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig
and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on
HAVE_VGA_BIOS. The new names are consistent with other x86 binary
blob options like HAVE_FSP/FSP_FILE/FSP_ADDR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Tom Rini
4905dfc65d Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-07-14 14:13:23 -04:00
Tom Rini
a70e86ffca Merge git://git.denx.de/u-boot-marvell 2015-07-10 09:40:48 -04:00
Stefan Roese
5956573683 arm: mvebu: db-88f6820-gp: Add USB/EHCI support
This patch enabled the USB/EHCI support for the Marvell
DB-88F6820-GP eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:56:07 +02:00
Stefan Roese
7cbaff9574 arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) support
Configure and enable the SATA/SCSI (AHCI) support for the Marvell
DB-88F6820-GP eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:55:50 +02:00
Stefan Roese
4d991cb3c7 arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x
This patch adds support for the common AHCI controller on the Marvell
Armada 38x.

Tested on the Marvell DB-88F6820-GP eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:55:50 +02:00
Stefan Roese
e80f1e85d6 arm: mvebu: db-88f6820-gp: Add MMC/SDIO support
This patch adds MMC/SDIO support to the Marvell DB-88F6820-GP board
configuration. Including support for the common partitions and
filesystems.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:12 +02:00
Yegor Yefremov
5e5055f0a3 arm: baltos: change USB ports functions
Baltos has USB0 connected to a USB hub and thus is host-only. USB1
is connected to microUSB connector and thus should use OTG mode.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2015-07-09 12:35:09 -04:00
Michael Scherban
40d79e483c keystone2: config: update default mtd
Because it is possible for the MTD number to change, causing a
filesystem mount failure, we should use the volume name instead
of the MTD number and let Linux resolve the correct one.

Signed-off-by: Mike Scherban <m-scherban@ti.com>
2015-07-08 21:51:41 -04:00
Antonio Borneo
03514739dc stm32f4: fix gpio description in comment
On STM32F429 gpio PC6/PC7 can be allocated for USART6, as
reported in the comment.
But current code in
	drivers/serial/serial_stm32.c
uses a different gpio mapping (PG14/PG9) for USART6.

Fix the comment to match current code in the driver.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: u-boot@lists.denx.de
To: Kamil Lulko <rev13@wp.pl>
Cc: Tom Rini <trini@konsulko.com>
2015-07-08 21:51:40 -04:00
Antonio Borneo
6f921ecc7e stm32f4: fix minor typo in comment
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: u-boot@lists.denx.de
To: Kamil Lulko <rev13@wp.pl>
Cc: Tom Rini <trini@konsulko.com>
2015-07-08 21:51:40 -04:00
Egli, Samuel
0dd1c31d14 siemens,am33x: adjust mtd partition
Use one mtd partition for rootfs and configuration by
means of ubi volumes and get rid of configuration partition.
We can use partition layout for both 256MB and 512MB flash.

Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Roger Meier <r.meier@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Heiko Schocher <hs@denx.de>
2015-07-08 21:51:39 -04:00
Yegor Yefremov
5f9c58e97e arm: baltos: fix NAND boot
Specify proper U-Boot offset, enable prefetch mode,
increase bootm size and add FIT fallback, if board_name
is not present in kernel-fit.itb image.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2015-07-08 21:51:38 -04:00
Yegor Yefremov
e6b1b58bed arm: baltos: drop I2C speed to 1000 Hz
This action is need to make I2C communication with PMIC
stable for low temperature. Print current I2C speed in
SPL for visual control.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2015-07-08 21:51:37 -04:00
Yegor Yefremov
5833521b38 arm: baltos: enable CMD_NET and FIT support in defconfig
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-08 21:51:37 -04:00
Yegor Yefremov
a800f2fda7 arm: convert am3517_crane and am3517_evm to generic boards
Add CONFIG_SYS_GENERIC_BOARD to board's config header.

Boot-tested on am3517_evm board.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2015-07-08 21:51:36 -04:00
Tom Rini
808bf7cf65 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Conflicts:
	configs/tbs2910_defconfig
	configs/tqma6q_mba6_mmc_defconfig
	configs/tqma6q_mba6_spi_defconfig
	configs/tqma6s_mba6_mmc_defconfig
	configs/tqma6s_mba6_spi_defconfig
	include/configs/mx6_common.h

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-03 08:41:02 -04:00
Vikas Manocha
e67abcaacb stv0991: enable cadence qspi controller & spi flash
This patch does all the board configurations required to use the qspi
controller & attached spi flash memory.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-03 13:50:53 +05:30
Vikas Manocha
f59fa3b181 stv0991: remove define CONFIG_OF_SEPARATE from board file
CONFIG_OF_SEPARATE is default define with CONFIG_OF_CONTROL, removing
this define from the board file to avoid multiple definition warning.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-03 13:50:53 +05:30
Vikas Manocha
5160faf8cd stv0991: move OF_CONTROL config to defconfig
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-03 13:50:53 +05:30
Vikas Manocha
137d5b9137 stv0991: enable saving enrironment in spi flash
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-03 13:50:52 +05:30
Sanchayan Maity
aa5a0d9894 colibri_vf: Increase console IO buffer size to 1024
Increase console IO buffer size to 1024 from the previous value of 256.
The previous value was too short for editing environment variables like
ubiboot from the console.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-07-03 09:38:10 +02:00
Jagan Teki
9cb528de48 defconfig: Move CONFIG_SPI_FLASH_BAR from configs
This commit moves:
- CONFIG_SPI_FLASH_BAR

from include/configs/*.h into configs/*_defconfigs

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:06 +05:30
Jagan Teki
6812484a40 sf: dataflash: Rename to CONFIG_SPI_FLASH_DATAFLASH
Rename CONFIG_SF_DATAFLASH into CONFIG_SPI_FLASH_DATAFLASH
as it follows the naming convention same as remaining configs.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:15:04 +05:30
Haikun Wang
9dd3d3c00c arm: ls102xa: Enable Driver Model SPI for ls1021atwr
Enable Driver Model SPI for ls1021atwr board.
DSPI and QSPI only be enabled when boot from QSPI.
DSPI and QSPI are compatible under Driver Model SPI.

Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Tested-by: Haikun Wang <haikun.wang@freescale.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-06-30 00:40:11 +05:30
Haikun Wang
e5493d4e49 arm: ls102xa: Enable Driver Model SPI for ls1021aqds
Enable Driver Model SPI for ls1021aqds board.
DSPI and QSPI is enabled only when boot from QSPI.
DSPI and QSPI are compatible under Driver Model SPI.

Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com>
Tested-by: Haikun Wang <haikun.wang@freescale.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-06-30 00:40:10 +05:30
Tom Rini
7853d76b0b Merge git://git.denx.de/u-boot-marvell 2015-06-28 16:31:32 -04:00
Kevin Smith
3fd38af704 db-88f6820-gp.h: Load data blobs into lower memory
By default on this platform, u-boot loads data into high memory
in the range of 0x7Fxxxxxx, which generates a data abort when the
kernel tries to read it.  Config the u-boot environment to load
the device tree and initrd image into lower memory to make them
accessible to the kernel.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Stefan Roese <sr@denx.de>
2015-06-28 17:52:41 +02:00
Kevin Smith
ae68763b6d mv-common.h: Include support for device trees
Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Stefan Roese <sr@denx.de>
2015-06-28 17:52:41 +02:00