Commit graph

585 commits

Author SHA1 Message Date
Benjamin Lim
febbc58331 Fix ext4 block group descriptor sizing
Ext4 allows for arbitrarily sized block group descriptors when 64-bit
addressing is enabled, which was previously not properly supported. This
patch dynamically allocates a chunk of memory of the correct size.

Signed-off-by: Benjamin Lim <jarsp.ctf@gmail.com>
2019-04-09 20:04:06 -04:00
Anssi Hannula
9b18358dc0 fs: fat: fix reading non-cluster-aligned root directory
A FAT12/FAT16 root directory location is specified by a sector offset and
it might not start at a cluster boundary. It also resides before the
data area (before cluster 2).

However, the current code assumes that the root directory is located at
a beginning of a cluster, causing no files to be found if that is not
the case.

Since the FAT12/FAT16 root directory is located before the data area
and is not aligned to clusters, using unsigned cluster numbers to refer
to the root directory does not work well (the "cluster number" may be
negative, and even allowing it be signed would not make it properly
aligned).

Modify the code to not use the normal cluster numbering when referring to
the root directory of FAT12/FAT16 and instead use a cluster-sized
offsets counted from the root directory start sector.

This is a relatively common case as at least the filesystem formatter on
Win7 seems to create such filesystems by default on 2GB USB sticks when
"FAT" is selected (cluster size 64 sectors, rootdir size 32 sectors,
rootdir starts at half a cluster before cluster 2).

dosfstools mkfs.vfat does not seem to create affected filesystems.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Reviewed-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Tested-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
2019-04-09 20:04:04 -04:00
Gero Schumacher
1c48fda3e5 fs: ext4: Problem with ext4load and sparse files
Hi,

when I try to load a sparse file via ext4load, I am getting the error message
'invalid extent'

After a deeper look in the code, it seems to be an issue in the function ext4fs_get_extent_block in fs/ext4/ext4_common.c:

The file starts with 1k of zeros. The blocksize is 1024. So the first extend block contains the following information:

eh_entries: 1
eh_depth: 1
ei_block 1

When the upper layer (ext4fs_read_file) asks for fileblock 0, we are running in the 'invalid extent' error message.
For me it seems, that the code is not prepared for handling a sparse block at the beginning of the file. The following change, solved my problem:

I am really not an expert in ext4 filesystems. Can somebody please have a look at this issue and give me a feedback, if I am totally wrong or not?
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
aaa12157c7 fs: Add a new command to create symbolic links
The command line is:
ln <interface> <dev[:part]> target linkname

Currently symbolic links are supported only in ext4 and only if the option
CMD_EXT4_WRITE is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
5efc0686ee fs: ext4: Add support for the creation of symbolic links
Re-use the functions used to write/create a file, to support creation of a
symbolic link.
The difference with a regular file are small:
- The inode mode is flagged with S_IFLNK instead of S_IFREG
- The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG
- Instead of storing the content of a file in allocated blocks, the path
to the target is stored. And if the target's path is short enough, no block
is allocated and the target's path is stored in ext2_inode.b.symlink

As with regulars files, if a file/symlink with the same name exits, it is
unlinked first and then re-created.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix ext4 env code]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:03:30 -04:00
Jean-Jacques Hiblot
b000180b0f fs: ext4: constify the buffer passed to write functions
There is no need to modify the buffer passed to ext4fs_write_file().
The memset() call is not required here and was likely copied from the
equivalent part of the ext4fs_read_file() function where we do need it.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Stephen Warren
d5aee659f2 fs: ext4: cache extent data
When a file contains extents, U-Boot currently reads extent-related data
for each block in the file, even if that data is located in the same
block each time. This significantly slows down loading of files that use
extents. Implement a very dumb cache to prevent repeatedly reading the
same block. Files with extents now load as fast as files without.

Note: There are many cases where read_allocated_block() is called. This
patch only addresses one of those places; all others still read redundant
data in any case they did before. This is a minimal patch to fix the
load command; other cases aren't fixed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-04-09 15:34:15 -04:00
Eran Matityahu
734b080e78 mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit
Before printk.h was introduced and MTDDEBUG was removed,
pr_crit() was calling MTDDEBUG(), which was since then
replaced by the current pr_debug().

pr_debug is more appropriate here.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09 07:46:42 +02:00
Sébastien Szymanski
2e7365518a fs: ext4: do not write on filesystem with metadata_csum feature
U-Boot doesn't support metadata_csum feature. Writing to filesystem with
metadata_csum feature makes the filesystem corrupted and unbootable by
Linux:

[    2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0)
[    2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0)
...
[    2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0)
[    2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0)
[    2.687920] JBD2: journal checksum error
[    2.691982] EXT4-fs (mmcblk0p2): error loading journal
[    2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74

Don't write to filesystem with meatadata_csum feature to not corrupt the
filesystem.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-03-22 12:15:24 -04:00
Heinrich Schuchardt
7274b7638a fs: fat: fix link error when building with DEBUG=1
When compiling with DEBUG=1 an error
fs/fat/fat_write.c:831: undefined reference to `__aeabi_ldivmod'
occurred.

We should use do_div() instead of the modulus operator.

filesize and cur_pos cannot be negative. So let's use u64 to avoid
warnings.

Fixes: cb8af8af5b ("fs: fat: support write with non-zero offset")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-28 14:21:46 -05:00
Tien Fong Chee
e48485f5e4 fs: fat: Reduce default max clustersize 64KiB from malloc pool
Release cluster block immediately when no longer use would help to reduce
64KiB memory allocated to the memory pool.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19 08:55:43 -05:00
Tien Fong Chee
8537874a65 fs: fat: dynamically allocate memory for temporary buffer
Drop the statically allocated get_contents_vfatname_block and
dynamically allocate a buffer only if required. This saves
64KiB of memory.

Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19 08:55:43 -05:00
Marek Vasut
e531c6731b fs: ext4: Unmount FS in do_fs_type()
Unlike other generic FS accessors, fs_get_info() does not call fs_close()
at the end of it's operation. Thus, using fs_get_info() in do_fs_type()
without calling fs_close() causes potential memory leak by creating new
filesystem structures on each call of do_fs_type().

The test case to trigger this problem is as follows. It is required to
have ext4 filesystem on the first partition of the SDMMC device, since
ext4 requires stateful mount and causes memory allocation.
=> while true ; do mmc rescan ; fstype mmc 1 ; done
Eventually, the mounting of ext4 will fail due to malloc failures
and the filesystem will not be correctly detected.

This patch fixes the problem by adding the missing fs_close().

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2019-02-09 11:08:40 +01:00
Simon Goldschmidt
9cc2323fee lmb: handle more than one DRAM BANK
This fixes the automatic lmb initialization and reservation for boards
with more than one DRAM bank.

This fixes the CVE-2018-18439 and -18440 fixes that only allowed to load
files into the firs DRAM bank from fs and via tftp.

Found-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-02 08:19:17 -05:00
Tien Fong Chee
cafc429fa8 spl: fat/fs: Add control to build FS EXT4 in SPL
CONFIG_SPL_FS_EXT4 can be used to include/exclude the FS EXT4 from
SPL build. Excluding the FS EXT4 from SPL build can help to save 20KiB
memory.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
f4b4092474 spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both
obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be
used to control the build in both SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:14:21 -05:00
Tien Fong Chee
d8c3ea9982 spl: fat/fs: Add option to include/exclude FAT write build in SPL
Most of the time SPL only needs very simple FAT reading, so having
CONFIG_IS_ENABLED(FAT_WRITE) to exclude it from SPL build would help
to save 64KiB default max clustersize from memory.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Tien Fong Chee
0c3a9ed409 spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Simon Goldschmidt
aa3c609e2b fs: prevent overwriting reserved memory
This fixes CVE-2018-18440 ("insufficient boundary checks in filesystem
image load") by using lmb to check the load size of a file against
reserved memory addresses.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16 16:37:05 -05:00
Tom Rini
d3035b8560 Revert "fs: fat: assign rootdir sector when accessing root directory"
This particular commit is causing a regression on stih410-b2260 and
other platforms when reading from FAT16.  Noting that I had rebased the
original fix from Thomas onto then-current master, there is also
question from Akashi-san if the change is still needed after other FAT
fixes that have gone in.

This reverts commit a68b0e11ea.

Reported-by: Patrice Chotard <patrice.chotard@st.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-11 10:15:42 -05:00
Bin Meng
d94bf13c85 fs: cbfs: Fix out of bound access during CBFS walking through
The call to file_cbfs_fill_cache() is given with the parameter
'start' pointing to the offset by the CBFS base address, but
with the parameter 'size' that equals to the whole CBFS size.
During CBFS walking through, it checks files one by one and
after it pass over the end of the CBFS which is 4GiB boundary
it tries to check files from address 0 and so on, until the
overall size the codes checked hits to the given 'size'.

Fix this by passing 'start' pointing to the CBFS base address.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-31 09:42:41 +08:00
Christian Gmeiner
9914c73261 fs: cbfs: remove wrong header validation
cbfs_fileheader.len indicates the content size of the file in the
cbfs, and it has nothing to do with cbfs_fileheader.offset which
is the starting address of the file in the cbfs.

Remove such check in file_cbfs_next_file(). Before this change
'cbfsinit' failed with 'Bad CBFS file'. After this change all cbfs
commands are working as expected.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
[bmeng: keep the necessary header sanity check]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-31 09:42:41 +08:00
Patrick Wildt
8b021bb956 fs: fix FAT name extraction
The long name apparently can be accumulated using multiple
13-byte slots.  Unfortunately we never checked how many we
can actually fit in the buffer we are reading to.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2018-12-06 23:26:31 -05:00
Patrick Wildt
cd80a4fe61 fs: check FAT cluster size
The cluster size specifies how many sectors make up a cluster.  A
cluster size of zero makes no sense, as it would mean that the
cluster is made up of no sectors.  This will later lead into a
division by zero in sect_to_clust(), so better take care of that
early.

The MAX_CLUSTSIZE define can reduced using a define to make some
room in low-memory system.  Unfortunately if the code reads a
filesystem with a bigger cluster size it will overflow the buffer.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2018-12-06 23:26:31 -05:00
AKASHI Takahiro
b0c78d8ffc fs: update fs_dev_part in fs_set_blk_dev_with_part()
As in the case of fs_set_blk_dev(), fs_set_blk_dev_with_part() should
maintain and update fs_dev_part whenever called.

Without this patch, a problem will come up when an efi binary associated
with efi's BOOTxxxx variable is invoked via "bootefi bootmgr".

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Thomas RIENOESSL
a68b0e11ea fs: fat: assign rootdir sector when accessing root directory
This fixes problems accessing drives formated under
Windows as FAT16.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
[trini: Rebase on top of f528c140c8]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-20 12:35:35 -05:00
Keerthy
48e2f0c966 fs: Makefile: Add fs.c under SPL for fs_loader
Add fs.c under SPL as well as it is needed for fs_loader

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add as obj-$(CONFIG_FS_LOADER) for non-SPL_FRAMEWORK builds]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16 16:52:00 -05:00
Paul Davey
e4aa10ba57 fs: ubifs: Fix UBIFS decompression on 64 bit
Add local size_t variable to crypto_comp_decompress as intermediate
storage for destination length to avoid memory corruption and incorrect
results on 64 bit targets.

This is what linux does for the various lz compression implementations.

Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
2018-11-07 08:49:27 +01:00
Tom Rini
819c80f528 fs: fat: Fix warning in normalize_longname()
As observed with clang:
fs/fat/fat_write.c:1024:13: warning: comparison of constant 128
      with expression of type 'char' is always false
      [-Wtautological-constant-out-of-range-compare]
                if ((0x80 <= c) && (c <= 0xff))
                     ~~~~ ^  ~
fs/fat/fat_write.c:1024:25: warning: comparison of constant 255
      with expression of type 'char' is always true
      [-Wtautological-constant-out-of-range-compare]
                if ((0x80 <= c) && (c <= 0xff))
                                    ~ ^  ~~~~

Fixes: 25bb9dab14 ("fs: fat: check and normalize file name")
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16 16:44:12 +02:00
Yevgeny Popovych
5b781cf08d fs: btrfs: Fix tree traversal with btrfs_next_slot()
When traversing slots in a btree (via btrfs_path) with btrfs_next_slot(),
we didn't correctly identify that the last slot in the leaf was reached
and we should jump to the next leaf.

This could lead to any kind of runtime errors or corruptions, like:
* file data not being read at all, or is read partially
* file is read but is corrupted
* (any) metadata being corrupted or not read at all, etc

The easiest way to reproduce this is to read a large enough file that
its EXTENT_DATA items don't fit into a single leaf.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
2018-10-08 14:45:02 -04:00
Heinrich Schuchardt
f105fe7bc5 fs: fat: fix set_cluster()
Avoid CoverityScan warning SIGN_EXTENSION by changing the type of
parameter size of set_cluster().

Avoid leaking stack content when writing an incomplete last sector.

Reported-by: Coverity (CID: 184096)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Heinrich Schuchardt
0d532e911c fs: fat: memory leak in fat_unlink()
Do not leak filename_copy in case of error.
Catch out of memory when calling strdup.

Reported-by: Coverity (CID: 184086)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Marek Vasut
c9795396ed fs: btrfs: Fix cache alignment bugs
The btrfs implementation passes cache-unaligned buffers into the
block layer, which triggers cache alignment problems down in the
block device drivers. Align the buffers to prevent this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Behun <marek.behun@nic.cz>
2018-09-30 13:00:37 -04:00
Heinrich Schuchardt
1c381cebb7 fs: fat: unaligned buffers are not an error
The FAT driver supports unaligned reads and writes and EFI applications
will make use of these. So a misaligned buffer is only worth a debug
message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
f8240ce95d fs: fat: support unlink
In this patch, unlink support is added to FAT file system.
A directory can be deleted only if it is empty.

In this implementation, only a directory entry for a short file name
will be removed. So entries for a long file name can and should be
reclaimed with fsck.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
e2519daf5c fs: add unlink interface
"unlink" interface is added to file operations.
This is a preparatory change as unlink support for FAT file system
will be added in next patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
31a18d570d fs: fat: support mkdir
In this patch, mkdir support is added to FAT file system.
A newly created directory contains only "." and ".." entries.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
AKASHI Takahiro
3a10e07234 fs: fat: remember the starting cluster number of directory
The starting cluster number of directory is needed to initialize ".."
(parent directory) entry when creating a new directory.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
e7074cffb8 fs: add mkdir interface
"mkdir" interface is added to file operations.
This is a preparatory change as mkdir support for FAT file system
will be added in next patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
cb8af8af5b fs: fat: support write with non-zero offset
In this patch, all the necessary code for allowing for a file offset
at write is implemented. What plays a major roll here is get_set_cluster(),
which, in contrast to its counterpart, set_cluster(), only operates on
already-allocated clusters, overwriting with data.

So, with a file offset specified, set_contents() seeks and writes data
with set_get_cluster() until the end of a file, and, once it reaches
there, continues writing with set_cluster() for the rest.

Please note that a file will be trimmed as a result of write operation if
write ends before reaching file's end. This is an intended behavior
in order to maintain compatibility with the current interface.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
704df6aa0a fs: fat: refactor write interface for a file offset
The current write implementation is quite simple: remove existing clusters
and then allocating new ones and filling them with data. This, inevitably,
enforces always writing from the beginning of a file.

As the first step to lift this restriction, fat_file_write() and
set_contents() are modified to accept an additional parameter, file offset
and further re-factored so that, in the next patch, all the necessary code
will be put into set_contents().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
4ced2039dc fs: fat: support write with sub-directory path
In this patch, write implementation is overhauled and rewritten by
making full use of directory iterator. The obvious bonus is that we are
now able to write to a file with a directory path, like /A/B/C/FILE.

Please note that, as there is no notion of "current directory" on u-boot,
a file name specified must contain an absolute directory path. Otherwise,
"/" (root directory) is assumed.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f1149cea16 fs: fat: write returns error code instead of -1
It would be good that FAT write function return error code instead of
just returning -1 as fat_read_file() does.
This patch attempts to address this issue although it is 'best effort
(or estimate)' for now.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
25bb9dab14 fs: fat: check and normalize file name
FAT file system's long file name support is a bit complicated and has some
restrictions on its naming. We should be careful about it especially for
write as it may easily end up with wrong file system.

normalize_longname() check for the rules and normalize a file name
if necessary. Please note, however, that this function is yet to be
extended to fully comply with the standard.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
881042ef02 Revert "fs: fat: cannot write to subdirectories"
This reverts commit 0dc1bfb730.
The succeeding patch series will supersede it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f528c140c8 fs: fat: assure iterator's ->dent belongs to ->clust
In my attempt to re-work write operation, it was revealed that iterator's
"clust" does not always point to a cluster to which a current directory
entry ("dent") belongs.
This patch assures that it is always true by adding "next_clust" which is
used solely for dereferencing a cluster chain.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
b94b6be543 fs: fat: handle "." and ".." of root dir correctly with fat_itr_resolve()
FAT's root directory does not have "." nor ".."
So care must be taken when scanning root directory with fat_itr_resolve().
Without this patch, any file path starting with "." or ".." will not be
resolved at all.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
AKASHI Takahiro
f23101f951 fs: fat: extend get_fs_info() for write use
get_fs_info() was introduced in major re-work of read operation by Rob.
We want to reuse this function in write operation by extending it with
additional members in fsdata structure.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Stefan Roese
7236e24bc4 fs: ubifs: Add missing newlines in super.c
I just stumbled over some cluttered UBIFS messages. It seems some
newline chars are missing in the current U-Boot UBI source.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2018-09-14 06:31:54 +02:00
Masahiro Yamada
dee37fc99d Remove <inttypes.h> includes and PRI* usages in printf() entirely
In int-ll64.h, we always use the following typedefs:

  typedef unsigned int         u32;
  typedef unsigned long        uintptr_t;
  typedef unsigned long long   u64;

This does not need to match to the compiler's <inttypes.h>.
Do not include it.

The use of PRI* makes the code super-ugly.  You can simply use
"l" for printing uintptr_t, "ll" for u64, and no modifier for u32.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10 20:48:17 -04:00