Commit graph

16 commits

Author SHA1 Message Date
Michal Simek
3b3ea2c56e Kconfig: cmd: Make networking command dependent on NET
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NET

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-27 16:25:30 -05:00
Heinrich Schuchardt
9dfd84da8c efi_loader: allow creation of more device part nodes
Create device path nodes for UCLASS_ETH udevices.
Create device path nodes of block device children of UCLASS_MMC udevices.
Consistently use debug for unsupported nodes.
Set the log level to error.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: Fix build failure by adding #ifdef CONFIG_DM_ETH]
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:10:05 +01:00
Heinrich Schuchardt
65436f91c5 efi_loader: provide function to get last node of a device path
On a block device and its partitions the same protocols can be
installed. To tell the apart we can use the type of the last
node of the device path which is not the end node.

The patch provides a utility function to find this last node.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:14 +01:00
Heinrich Schuchardt
98d48bdf41 efi_loader: provide a function to create a partition node
Provide new function efi_dp_part_node() to create a device
node for a partition.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:14 +01:00
Heinrich Schuchardt
04298686a4 efi_loader: return NULL from device path functions
For the construction of device paths we need to call the
AllocatePool service. We should not ignore if it fails due to an
out of memory situation.

This patch changes the device path functions to return NULL if
the memory allocation fails.

Additional patches will be needed to fix the callers.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:13 +01:00
Heinrich Schuchardt
af3106a12d efi_loader: support device path for IDE and SCSI disks
Correctly create the device path for IDE and SCSI disks.

Support for SATA remains to be done in a future patch.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:12 +01:00
Heinrich Schuchardt
2bc61b8352 efi_loader: create full device path for block devices
When creating the device path of a block device it has to
comprise the block device itself and should not end at
its parent.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:12 +01:00
Heinrich Schuchardt
bde6bfe4c3 efi_loader: comments for dp_part_fill()
Add a description for dp_part_fill().
Reword a comment in the function.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16 23:07:56 +01:00
Heinrich Schuchardt
7b982f009b efi_loader: correctly setup device paths for block devices
According to the UEFI spec the numbering of partitions has to
start with 1.

Partion number 0 is reserved for the optional device path for
the complete block device.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16 23:07:55 +01:00
Heinrich Schuchardt
66b051d51f efi_loader: correctly determine if an MMC device is an SD-card
The SD cards and eMMC devices have different device nodes.
The current coding interpretes all MMC devices as eMMC.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16 23:07:55 +01:00
Alexander Graf
905cb9e172 efi_loader: Ensure efi_dp_find_obj() finds exact matches
When calling efi_dp_find_obj(), we usually want to find the *exact* match
of an object for a given device path. However, I ran into a nasty corner case
where I had the following objects with paths available:

Handle 0x9feffa70
  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/EndEntire
Handle 0x9feffb58
  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/HD(1,800,32000,2de808cb00000000,1,1)/EndEntire

and was searching for

  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/HD(1,800,32000,2de808cb00000000,1,1)/EndEntire

But because our device path search looked for any substring match, it would
return

  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/EndEntire

because that path is a full substring of the path we were searching for.

So this patch adapts the device path search logic to always look for exact
matches first. The way we distinguish between those cases is by looking at
whether our caller actually deals with remainders.

As a side effect, the code as is from all I can tell now never does a
substring match anymore, because it always gets called with rem=NULL, so
we always only do exact matches now.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16 22:51:19 +01:00
Heinrich Schuchardt
72292aba4f efi_loader: simplify find_obj
Use function efi_search_protocol().

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01 13:37:20 +01:00
Jonathan Gray
b6e9e09770 efi_loader: initialise partition_signature memory
Zero partition_signature in the efi_device_path_hard_drive_path
structure when signature_type is 0 (no signature) as required by the
UEFI specification.

This is required so that efi_dp_match() will work as expected
when doing memcmp() comparisons.  Previously uninitialised memory
would cause it not match nodes when it should have when the signature
type was not GUID.

Corrects a problem where the loaded image protocol would not return a
device path with MEDIA_DEVICE causing the OpenBSD bootloader to fail
on rpi_3 and other targets.

v2: Also handle signature_type 1 (MBR) as described in the specification

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Tested-by: Artturi Alm <artturi.alm@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01 13:23:02 +01:00
Heinrich Schuchardt
ff401d3f81 efi_loader: efi_dp_match should have const arguments
efi_dp_match does not change its arguments.
So they should be marked as const.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01 13:22:56 +01:00
Rob Clark
bf19273e81 efi_loader: Add mem-mapped for fallback
When we don't have a real device/image path, such as 'bootefi hello',
construct a mem-mapped device-path.

This fixes 'bootefi hello' after devicepath refactoring.

Fixes: 95c5553ea2 ("efi_loader: refactor boot device and loaded_image handling")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-12 17:22:58 +02:00
Rob Clark
b66c60dde9 efi_loader: add device-path utils
Helpers to construct device-paths from devices, partitions, files, and
for parsing and manipulating device-paths.

For non-legacy devices, this will use u-boot's device-model to construct
device-paths which include bus hierarchy to construct device-paths.  For
legacy devices we still fake it, but slightly more convincingly.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-20 10:31:55 +02:00